Search NASA⌕ Search

SEARCH · Search NASA

Results for “Project Profile”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

A model-based scatter artifacts correction for cone beam CT

Purpose: Due to the increased axial coverage of multislice computed tomography (CT) and the introduction of flat detectors, the size of x-ray illumination fields has grown dramatically, causing an increase in scatter radiation. For CT imaging, scatter is a significant issue that introduces shading artifact, streaks, as well as reduced contrast and Hounsfield Units (HU) accuracy. The purpose of this work is to provide a fast and accurate scatter artifacts correction algorithm for cone beam CT (CBCT) imaging. Methods: The method starts with an estimation of coarse scatter profiles for a set of CBCT data in either image domain or projection domain. A denoising algorithm designed specifically for Poisson signals is then applied to derive the final scatter distribution. Qualitative and quantitative evaluations using thorax and abdomen phantoms with Monte Carlo (MC) simulations, experimental Catphan phantom data, and in vivo human data acquired for a clinical image guided radiation therapy were performed. Scatter correction in both projection domain and image domain was conducted and the influences of segmentation method, mismatched attenuation coefficients, and spectrum model as well as parameter selection were also investigated. Results: Results show that the proposed algorithm can significantly reduce scatter artifacts and recover the correct HU in either projection domain or image domain. For the MC thorax phantom study, four-components segmentation yields the best results, while the results of three-components segmentation are still acceptable. The parameters (iteration number K and weight β) affect the accuracy of the scatter correction and the results get improved as K and β increase. It was found that variations in attenuation coefficient accuracies only slightly impact the performance of the proposed processing. For the Catphan phantom data, the mean value over all pixels in the residual image is reduced from −21.8 to −0.2 HU and 0.7 HU for projection domain and image domain, respectively. The contrast of the in vivo human images is greatly improved after correction. Conclusions: The software-based technique has a number of advantages, such as high computational efficiency and accuracy, and the capability of performing scatter correction without modifying the clinical workflow (i.e., no extra scan/measurement data are needed) or modifying the imaging hardware. When implemented practically, this should improve the accuracy of CBCT image quantitation and significantly impact CBCT-based interventional procedures and adaptive radiation therapy.

60 APPLIED LIFE SCIENCES↗

Redesign of the End Group in the 3.9 GHz LCLS-II Cavity

Development and production of Linac Coherent Light Source II (LCLS-II) is underway. The central part of LCLS-II is a continuous wave superconducting RF (CW SCRF) electron linac. The 3.9 GHz third harmonic cavity similar to the XFEL design will be used in LCLS-II for linearizing the longitudinal beam profile*. The initial design of the 3.9 GHz cavity developed for XFEL project has a large, 40 mm, beam pipe aperture for better higher-order mode (HOM) damping. It is resulted in dipole HOMs with frequencies nearby the operating mode, which causes difficulties with HOM coupler notch filter tuning. The CW linac operation requires an extra caution in the design of the HOM coupler in order to prevent its possible overheating. In this paper we present the modified 3.9 GHz cavity End Group for meeting the LCLS-II requirements

43 PARTICLE ACCELERATORS↗

Sandia National Laboratories Ecosystem for Open Science: Metadata Schema v0.2 Description.

The Ecosystem for Open Science (eOS) initiative was established in 2019. Its objective is improving openness and sharing of data and information across Defense Nuclear Nonproliferation (DNN) Research and Development (R&D) activities. To support this initiative, the eOS team at Sandia National Laboratories (SNL) developed metadata and data standards and proposed a machine-readable metadata schema. The nuclear explosion monitoring field was selected as a focus area due to its the wide range of pertinent phenomenologies.We developed the DCAT-eOS-AP metadata schema extending the Data Catalog Vocabulary version 2 (DCATv2) standard using an application profile (AP), to fit the needs of multi-disciplinary NA-22 projects. The DCAT-eOS-AP metadata schema describes data at different levels of granularity ranging from general descriptions to more domain-specific granular metadata. Its implementation and serialization is flexible with the ability to include new file or data types. Thus, it will scale with the ever-increasing data management needs of government research. Due to the multitude of phenomenologies represented in the DCAT-eOS-AP schema, we anticipate that it will be easily extensible to various projects across many DOE mission areas. This document describes data management challenges faced within the DNN R&D portfolio and provides insight on how metadata and data standards/guidelines combined with a comprehensive metadata schema can add value to programs throughout the Department of Energy (DOE). It reviews the importance of metadata standards, FAIR (Findability, Accessibility, Interoperability, and Reusability) data principles, and metadata schemas. Additionally, it summarizes input from subject matter experts (SME) at SNL and other National Laboratories that resulted in metadata and data standards/guidelines encompassing domains relevant to NA-22 projects. Finally, we discuss the DCAT-eOS-AP metadata development. Implementation recommendations and future development directions are included for those keen on adopting the DCAT-eOS-AP metadata schema.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

End-Use Load Profiles for the U.S. Building Stock: Practical Guidance on Accessing and Using the Data

This report describes example applications and considerations for using the National Renewable Energy Lab’s ResStock and ComStock end use load profiles (EULP). The report begins with an introduction to the three year project, and then provides instructions on accessing the EULP data and considerations for using the EULP and limitations of the data. The remainder of the report is on EULP use cases, including a variety of electricity planning use cases.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Exploration of Mars by Mariner 9 - Television sensors and image processing.

Two cameras equipped with selenium sulfur slow scan vidicons were used in the orbital reconnaissance of Mars by the U.S. Spacecraft Mariner 9 and the performance characteristics of these devices are presented. Digital image processing techniques have been widely applied in the analysis of images of Mars and its satellites. Photometric and geometric distortion corrections, image detail enhancement and transformation to standard map projection have been routinely employed. More specializing applications included picture differencing, limb profiling, solar lighting corrections, noise removal, line plots and computer mosaics. Information on enhancements as well as important picture geometric information was stored in a master library. Display of the library data in graphic or numerical form was accomplished by a data management computer program.

Cutts, J. A.↗

Topography of aortic heart valves

The cooperative effort towards the development of a tri-leaflet prosthetic heart valve is described. The photogrammetric studies were conducted on silicone rubber molds. Information on data acquisition and data reduction phases is given, and certain accuracy aspects of the project are explained. The various outputs which are discussed include digital models, profiles, and contour maps.

Karara, H. M.↗

Thermal analysis of heat storage canisters for a solar dynamic, space power system

A thermal analysis was performed of a thermal energy storage canister of a type suggested for use in a solar receiver for an orbiting Brayton cycle power system. Energy storage for the eclipse portion of the cycle is provided by the latent heat of a eutectic mixture of LiF and CaF2 contained in the canister. The chief motivation for the study is the prediction of vapor void effects on temperature profiles and the identification of possible differences between ground test data and projected behavior in microgravity. The first phase of this study is based on a two-dimensional, cylindrical coordinates model using an interim procedure for describing void behavor in 1-g and microgravity. The thermal analysis includes the effects of solidification front behavior, conduction in liquid/solid salt and canister materials, void growth and shrinkage, radiant heat transfer across the void, and convection in the melt due to Marangoni-induced flow and, in 1-g, flow due to density gradients. A number of significant differences between 1-g and o-g behavior were found. This resulted from differences in void location relative to the maximum heat flux and a significantly smaller effective conductance in 0-g due to the absence of gravity-induced convection.

Wichner, R. P.↗

Photoelectrochemical fabrication of spectroscopic diffraction gratings, phase 2

This program was directed toward the production of Echelle diffraction gratings by a light-driven, electrochemical etching technique (photoelectrochemical etching). Etching is carried out in single crystal materials, and the differential rate of etching of the different crystallographic planes used to define the groove profiles. Etching of V-groove profiles was first discovered by us during the first phase of this project, which was initially conceived as a general exploration of photoelectrochemical etching techniques for grating fabrication. This highly controllable V-groove etching process was considered to be of high significance for producing low pitch Echelles, and provided the basis for a more extensive Phase 2 investigation.

Rauh, R. David↗

The Clementine mission: Initial results from lunar mapping

Clementine was a mission designed to test the space worthiness of a variety of advanced sensors for use on military surveillance satellites while, at the same time, gathering useful scientific information on the composition and structure of the Moon and a near Earth asteroid. Clementine was dispatched for an extended stay in the vicinity of Earth's Moon on 25 Jan. 1994 and arrived at the Moon on 20 Feb. 1994. The spacecraft started systematic mapping on 26 Feb., completed mapping on 22 Apr., and left lunar orbit on 3 May. The entire Clementine project, from conception through end of mission, lasted approximately three years. Topographic profiles derived from lidar laser altimetry permitted construction of a global topographic map of the Moon. Clementine also aimed at mapping the color of the Moon in eleven different wavelengths in the visible and near infrared parts of the system. With rock and soil samples of known geological context available from the Apollo and Lunar programs, the Clementine mission offers the data needed to construct a global digital image model of the Moon.

Spudis, P. D.↗

Validation of Surface Skin Temperature and Moisture Profiles Using Satellite Data

New validation techniques and metrics using satellite data have been developed to evaluate the quality of model-based estimates of surface skin temperature (Tg) and moisture profiles (q). The satellite data consist of clear sky outgoing long-wave radiation (CLR), broadband radiances from 8 to 12 mu (RadWn), brightness temperature centered around 10.8 mu (Tbb), and total precipitable water (TPW) from microwave radiometry. We show that CLR can be used to diagnose Tg. Furthermore, by using a combination of CLR and RadWn from CERES-TRMM measurements and TPW from SSM/I, we are able to identify errors in the moisture profile. Finally, three-hourly Tbb from the International Satellite Cloud Climatology Project can be used to evaluate the amplitude and diurnal variation of Tg. For purpose of illustration, Tg and q are evaluated from runs with an early version of the Goddard Earth Observing System Data Assimilation System (GEOS-2). It is found that, in general, Tg is too cold in the winter hemisphere and q is too wet in the upper atmosphere. In order to address these deficiencies, several improvements have been implemented into GEOS-2, including a Land-Surface-Model, a Moist Turbulence Scheme, and the assimilation of new TOVS retrievals. Preliminary results indicate positive impacts from each of these implementations.

Wu, Man Li C.↗

Measurements of DSD Second Moment Based on Laser Extinction

Using a technique recently developed for estimating the density of surface dust dispersed during a rocket landing, measuring the extinction of a laser passing through rain (or dust in the rocket case) yields an estimate of the 2nd moment of the particle cloud, and rainfall drop size distribution (DSD) in the terrestrial meteorological case. With the exception of disdrometers, instruments that measure rainfall make in direct measurements of the DSD. Most common of these instruments are the rainfall rate gauge measuring the 1 1/3 th moment, (when using a D(exp 2/3) dependency on terminal velocity). Instruments that scatter microwaves off of hydrometeors, such as the WSR-880, vertical wind profilers, and microwave disdrometers, measure the 6th moment of the DSD. By projecting a laser onto a target, changes in brightness of the laser spot against the target background during rain, yield a measurement of the DSD 2nd moment, using the Beer-Lambert law. In order to detect the laser attenuation within the 8-bit resolution of most camera image arrays, a minimum path length is required, depending on the intensity of the rainfall rate. For moderate to heavy rainfall, a laser path length of 100 m is sufficient to measure variations in optical extinction using a digital camera. A photo-detector could replace the camera, for automated installations. In order to spatially correlate the 2nd moment measurements to a collocated disdrometer or tipping bucket, the laser's beam path can be reflected multiple times using mirrors to restrict the spatial extent of the measurement. In cases where a disdrometer is not available, complete DSD estimates can be produced by parametric fitting of DSD model to the 2nd moment data in conjunction with tipping bucket data. In cases where a disdrometer is collocated, the laser extinction technique may yield a significant improvement to insitu disdrometer validation and calibration strategies

Lane, John E.↗

Southern Ocean Solar Reflection Biases in Cmip6 Models Linked to Cloud Phase and Vertical Structure Representations

Over the Southern Ocean (SO, 40˚S-70˚S), climate models have consistently underestimated solar reflection. Here we evaluate the relationship between cloud profiles, cloud phase and radiation over the SO in Coupled Model Intercomparison Project Phase 6 (CMIP6) models against Clouds and the Earth's Radiant Energy System (CERES) and Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO). We find that the lack of solar reflection is slightly improved in CMIP6 models compared to CMIP5’s, attributable to a better representation of cloud fraction and phase. We show that clouds have a different vertical structure and radiative effect south and north of where the 0˚C isotherm meets the surface (~55˚S). Although the models capture the greater vertical extent of clouds south of 55˚S, they fail to reproduce the observed increase in solar reflection, which we pinpoint to cloud phase biases. Increasing CMIP6 supercooled liquid cloud opacity should help reduce their persistent SW biases.

Southern Ocean↗

Evaluating the World Infrared Standard Group Field Campaign Report

The standard to which broadband infrared irradiance radiometers (pyrgeometers) are compared is called the World Infrared Standard Group (WISG), maintained in Davos, Switzerland, at the World Radiation Center. WISG consists of four pyrgeometers that were calibrated using the absolute sky-scanning radiometer (ASR; Philipona 2001). The U.S. Department of Energy (DOE)’s Atmospheric Radiation Measurement (ARM) user facility has recently adopted this as its standard and all Eppley precision infrared radiometer (PIR) pyrgeometers in ARM are currently being calibrated by transfer calibrations from WISG. Subsequently, the ASR has fallen out of operation, Julian Gröbner (2012) developed the infrared integrating sphere (IRIS) radiometer, and Ibrahim Reda (2012) developed the absolute cavity pyrgeometer (ACP). The IRIS and ACP make absolute measurements of broadband downwelling infrared irradiance using different approaches. These two instruments have been compared to each other and to the WISG (Gröbner et al. 2014). The two newer instruments agreed within about 1 Wm-2 with each other, but not with the WISG, which was 2-5 Wm-2 lower depending on the column water vapor loading. Consequently, a case for changing the current WISG has been made by Gröbner and Reda, basing their suggestion on a total of nine hours of simultaneous IRIS and ACP comparison data as well as data from 177 clear-sky nights between the IRIS and WISG radiometers from October 2009 to December 2013 (Gröbner et al. 2014). These findings were later confirmed during the second International Pyrgeometer Comparison (IPgC-II) held in September/October 2015 at Physikalisch-Meteorologisches Observatorium Davos (PMOD)/World Radiation Center (WRC), bringing the total to about 20 hours of simultaneous ACP and IRIS measurements spread across two years and five days, in the mountainous environment of Davos. For this campaign, the WISG evaluation team deployed several instruments for absolute infrared radiation measurements and pyrgeometers that have been tied to the original standard (ASR) to ARM’s Southern Great Plains (SGP) atmospheric observatory in the fall of 2017. The experiment was carried out in two phases in order to increase the probability of collecting measurements at a range of water vapor column values, to which the measurements have shown some dependence. Phase 1 of the deployment ran from October 15 to 28, and Phase 2 ran from November 26 to December 9. Four redundant IRIS and two redundant ACP made coincident measurements during this time (the ASR no longer being available for comparison). The link to the WISG was provided by two pyrgeometers calibrated relative to the WISG prior to the campaign at SGP and also measuring coincidently with the two absolute radiometers. In addition, three of the original pyrgeometers directly tied to the original ASR were deployed. (See Figure 1 for instrument setup.) The experiment took place in the fall when water vapor columns were expected to range below and above the 1-cm level that is crucial for ferreting out the water vapor dependence of these measurements that has been noted in Gröbner et al. 2014 and other measurements. An additional source of longwave radiation flux observations was provided by the atmospheric emitted radiance interferometer (AERI). The AERI measures downwelling spectral radiance from 3.3 to 19 μm with a calibration that is better than 1% of the ambient radiance (Knuteson et al. 2004), and so serves as a potential source of evaluation for the WISG. The AERI’s field of view is 2 degrees, and is directed towards zenith. Earlier ARM projects led by Tony Clough as part of the Broadband Heating Rate Profile (BBHRP) effort demonstrated how to derive longwave flux from these zenith radiance observations.

AERI, instrument calibration, Southern Great Plain↗

Site Characterization and Adaptation - Lessons Learned from the Port Granby LLRW Project in Canada - 19255

The Port Hope Area Initiative (PHAI) is a community-based solution for the long-term management of historic low level radioactive waste (LLRW) resulting from 60 years of uranium and radium processing operations in the Town of Port Hope, Ontario. The Eldorado refinery, on the shores of Lake Ontario, began refining radium-226 from pitchblende ore, later transitioning to the refining of uranium ore. Process residues were deposited at the Welcome Waste Management Facility in the Town of Port Hope until the mid-1950's switching to the Port Granby Waste Management Facility (PGWMF), which continued to accept waste until the late 1980's. The Port Granby Project is part of the broader PHAI being completed by Canadian Nuclear Laboratories (CNL). The scope of remediation activities at Port Granby includes: 1) constructing a new, secure long-term waste management facility (LTWMF) and supporting infrastructure, and 2) excavating and relocating LLRW and marginally contaminated soil from the Port Granby Waste Management Facility (PGWMF) to the newly constructed LTWMF. Remediation design required extensive site investigations of waste buried in unmarked and unlined trenches across the PGWMF area. Investigations included reviews of historical records, interviews with past staff of Eldorado and Atomic Energy Canada Limited (the entity managing the PHAI cleanup prior to CNL), radiological surveys, and the advancement of boreholes across the site to facilitate the physical sampling of soil and groundwater contaminants indicative of the presence of LLRW. This paper describes the challenges associated with characterizing and quantifying waste prior to remediation and lessons-learned to adjust procedural adaptations during the characterization phase of a project to better anticipate the unanticipated nature and growth of the contamination profile that often occurs during remediation. Despite substantial pre-remediation investigative efforts, current PGWMF remediation activities have resulted in growth of both the areal and vertical extent of contamination. The contamination profile was shown to be dramatically influenced by leaching of contaminants deeper into native soils. In addition, remedial excavation discovered specific waste types such as unidentified compressed gas cylinders outside of the location indicated by historical records, as well as a quantity of unknown liquids and unmarked drums. These discoveries have resulted in higher waste quantity estimates and have required a partial redesign of the LTWMF mound (a higher final elevation and steeper slopes) to accommodate the increased waste volume. In addition, the means and methods necessary to execute the remedial construction had to be modified to account for the new conceptual model developed from the new contamination data. Despite extensive historical review and site characterization to define the nature and extent of LLRW buried at the PGWMF, actual conditions encountered during remediation efforts necessitated taking an adaptive approach to both the design of the LTWMF and the means and methods used for excavation and transport of waste. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Security Enhancements for Distributed Energy Resource Systems Interconnected with Distribution Networks: Final Technical Report

The revised IEEE 1547 Standard defines new complex communication-adjustable voltage and frequency regulation and ride-through characteristics, while maintaining the general antiislanding requirement for unintentional islanding situations. Unintentional islanding is prohibited while intentional islanding is specifically allowed, thus effectively enabling microgrid operation mode. Further, IEEE 1547-2018 Standard introduces new requirements in terms of interoperability so that the DER plant/circuit segments may be seamlessly integrated with the utility networks but at the same time become vulnerable to a cyber-attack. Traditional cybersecurity measures including encryption, authentication and role-based access control may not be fully implementable to all communication protocols specified in the IEEE 1547 Standard. Therefore, in this project we have identified, researched, implemented and tested several cyberphysical approaches that rely mostly on the behavior of the DER circuit and may help with validating the incoming command and control action potentially coming through an insecure communications channel. Additionally, we have built semantic models and communications profiles for DER facilities and have implemented lightweight IEC 61850 based publisher-subscriber GOOSE messaging mechanism, with security extensions in terms of authentication and encryption. The project proposed information models for integration into UCA OpenFMB 2.0 profiles focusing on grid code compliance.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Optimization and Directed, Natural Evolution of Biologically-Mediated Chromate Reduction in Subsurface Soil Microcosms (Final Technical Report)

The U.S. Department of Energy (DOE) is faced with the complex challenge of remediating or containing the various mixed wastes present in the subsurface environments of numerous DOE sites. The development of scientifically grounded strategies for the effective management and reclamation of these contaminated sites requires fundamental knowledge on the composition, dynamics, and metabolic potential of indigenous microbial communities, which are of primary importance in the fate and transport of heavy metals and radionuclides in subsurface environments. To date, the complex effect of environmental (both geochemical and biological) parameters on the bioremediative potential of subsurface microbial populations is only partially understood; this is primarily because the majority of microbial ecological studies have focused only on a qualitative analysis of subsurface microbial diversity, while the impact of quantitative changes in microbial communities as a function of environmental factors has been ignored. The project described here directly addresses the need for a more comprehensive, molecular understanding of how microbial growth and activity quantitatively relate to mineral and contaminant biotransformation (Science Element: Subsurface Microbial Ecology and Community, Notice DE-FG02-06ER06-12). The proposed study uses a truly novel combination of standard molecular phylogenetic analyses, rRNA-targeted fluorescence in situ hybridization, and mass spectrometry (MS)-based proteomics to investigate the biological response to experimentally controlled conditions and the concomitant effect on chromate reduction in situ. This response will be characterized in terms of microbial community structure (principally, population number and spatial distribution) and community proteome dynamics. Towards this overarching goal, we will (1) set up aerobic and anaerobic laboratory microcosms derived from subsurface soil collected from a chromate [Cr(VI)]-contaminated DOE site, and introduce Cr(VI)-reducing Pseudomonas putida (a facultative anaerobe) and/or Desulfovibrio desulfuricans (an obligate anaerobe) into the extant microbial community of each microcosm (Objective 1); (2) determine the qualitative and quantitative effects of organic carbon amendments on microcosm community structure, metabolic activity, and, most importantly, biologically-mediated chromate reduction (Objective 2); and (3) investigate the microbial community response from molecular and quantitative perspectives in microcosms challenged with increasing levels of chromate in order to drive selection of chromate-reducing populations (Objective 3). The proposed project is a collaborative endeavor among scientists from Purdue University and Oak Ridge National Laboratory. A unique aspect of this project is the application of shotgun MS techniques as molecular ecology tools for metabolically profiling targeted microbial species within the context of complex environmental communities and searching for unique or abundant proteins that might serve as indicators for heavy metal stress and reduction in microsites. Studies such as this one that tackle the challenge of characterizing the proteome dataset of a complex microbial microcosm will be needed to push the capabilities of current MS methodologies and to develop the next generation of microbial ecology tools of use in assessing bioremediation performance. We expect that the experimental protocols and results generated in this project will expand our quantitative and mechanistic understanding of the in situ biological contributions to metal contaminant transformation.

59 BASIC BIOLOGICAL SCIENCES↗

SU-F-T-527: A Novel Dynamic Multileaf Collimator Leaf-Sequencing Algorithm in Radiation Therapy

Purpose: A novel leaf-sequencing algorithm is developed for generating arbitrary beam intensity profiles in discrete levels using dynamic multileaf collimator (MLC). The efficiency of this dynamic MLC leaf-sequencing method was evaluated using external beam treatment plans delivered by intensity modulated radiation therapy technique. Methods: To qualify and validate this algorithm, integral test for the beam segment of MLC generated by the CORVUS treatment planning system was performed with clinical intensity map experiments. The treatment plans were optimized and the fluence maps for all photon beams were determined. This algorithm started with the algebraic expression for the area under the beam profile. The coefficients in the expression can be transformed into the specifications for the leaf-setting sequence. The leaf optimization procedure was then applied and analyzed for clinical relevant intensity profiles in cancer treatment. Results: The macrophysical effect of this method can be described by volumetric plan evaluation tools such as dose-volume histograms (DVHs). The DVH results are in good agreement compared to those from the CORVUS treatment planning system. Conclusion: We developed a dynamic MLC method to examine the stability of leaf speed including effects of acceleration and deceleration of leaf motion in order to make sure the stability of leaf speed did not affect the intensity profile generated. It was found that the mechanical requirements were better satisfied using this method. The Project is sponsored by the Scientific Research Foundation for the Returned Overseas Chinese Scholars, State Education Ministry.

60 APPLIED LIFE SCIENCES↗

CN jet velocity in Comet P/Halley

The projected expansion velocity of Comet Halley's coma is presently determined in CN jet images that were processed with a radial profile subtraction technique. It is established that the flow is approximately radial, and that the velocity can also be determined by measuring specific radial features in jets. The largest projected velocity is 1.7 +/- 0.3 km/sec, at 50,000 km from the nucleus. This is the largest expansion velocity found for this region of the Comet Halley coma. Comparisons are made with other observations and theoretical models.

Klavetter, James J.↗