Search NASA⌕ Search

SEARCH · Search NASA

Results for “Requirements development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
NASA NTRS2022

Importance of Different Parameterization Changes for the Updated Dust Cycle Modeling in the Community Atmosphere Model (Version 6.1)

The Community Atmosphere Model (CAM6.1), the atmospheric component of the Community Earth System Model (CESM; version 2.1), simulates the life cycle (emission, transport, and deposition) of mineral dust and its interactions with physio-chemical components to quantify the impacts of dust on climate and the Earth system. The accuracy of such quantifications relies on how well dust-related processes are represented in the model. Here we update the parameterizations for the dust module, including those on the dust emission scheme, the aerosol dry deposition scheme, the size distribution of transported dust, and the treatment of dust particle shape. Multiple simulations were undertaken to evaluate the model performance against diverse observations, and to understand how each update alters the modeled dust cycle and the simulated dust direct radiative effect. The model–observation comparisons suggest that substantially improved model representations of the dust cycle are achieved primarily through the new more physically-based dust emission scheme. In comparison, the other modifications induced small changes to the modeled dust cycle and model–observation comparisons, except the size distribution of dust in the coarse mode, which can be even more influential than that of replacing the dust emission scheme. We highlight which changes introduced here are important for which regions, shedding light on further dust model developments required for more accurately estimating interactions between dust and climate.

mineral dust parameterizations↗
NASA NTRSDate not supplied

An Experimental Study on Low Pressure Frost Formation for Lunar Polar Water Capture

In-situ resource utilization (ISRU) is a vital component of NASA’s mission to the Moon and beyond, as the extraction of resources from the environment can reduce payload weight and the frequency of resupply missions. Since the discovery of water in the regolith of the permanently shadowed regions (PSR) of the Moon, its extraction and transport has become an area of increasing interest for NASA. One proposed method is heating icy regolith to free the water before desublimating and transporting it as ice in a tanker. However, little is known regarding the dynamics of frost growth at low pressures, and an understanding of the heat transfer process is required to properly size the heat exchanger for the tanker. To investigate this phenomenon, a cold plate was placed in a vacuum chamber with water vapor directed at its surface. The chamber pressure (300 and 500 Pa) and cold plate temperature (–18 to –5 °C) were kept below the triple point and varied throughout the experiment to examine their impact on frost layer heat transfer. As water flowed into the chamber and deposited on the cold plate surface, the heat flux and temperature were measured along with the frost layer thickness and/or mass. Density calculated at the conclusion of each test suggests the frost layer is denser than that of frost grown at atmospheric pressure. The results demonstrate unexpected density and heat transfer characteristics and require development of a new model of frost growth for lunar conditions.

In situ Resource Utiliztion↗
NASA NTRSDate not supplied

An Experimental Study on Low Pressure Frost Formation for Lunar Polar Water Capture

In-situ resource utilization (ISRU) is a vital component of NASA’s mission to the Moon and beyond, as the extraction of resources from the environment can reduce payload weight and the frequency of resupply missions. Since the discovery of water in the regolith of the permanently shadowed regions (PSR) of the Moon, its extraction and transport has become an area of increasing interest for NASA. One proposed method is heating icy regolith to free the water before de-sublimating and transporting it as ice in a tanker. However, little is known regarding the dynamics of frost growth at low pressures, and an understanding of the heat transfer process is required to properly size the heat exchanger for the tanker. To investigate this phenomenon, a cold plate was placed in a vacuum chamber with water vapor directed at its surface. The chamber pressure (300 and 500 Pa) and cold plate temperature (–18 to –5 °C) were kept below the triple point and varied throughout the experiment to examine their impact on frost layer heat transfer. As water flowed into the chamber and deposited on the cold plate surface, the heat flux and temperature were measured along with the frost layer thickness and/or mass. Density calculated at the conclusion of each test suggests the frost layer is denser than that of frost grown at atmospheric pressure. The results demonstrate unexpected density and heat transfer characteristics and require development of a new model of frost growth for lunar conditions

Lunar polar↗
NASA NTRSDate not supplied

Systems Engineering with a Focus on Failure Prevention

A discussion of Systems Engineering principles as related to failure prevention methodologies and technologies. The presentation outlines requirements development, design reviews, verification and validation, and finally risk management prectices.

Systems Engineering, Failure Prevention↗
NASA NTRSDate not supplied

Gateway Induced Environments Overview

Gateway will be a long duration space station orbiting the Moon in support of NASA’s Artemis campaign. Over its lifetime, Gateway will be exposed to a variety of induced environments, including materials outgassing, chemical and electric thruster plumes, vacuum vents, and lunar dust transport (from the Human Lander System, HLS). Induced Environments can impact vehicle performance and mission success. The multidisciplinary Gateway Induced Environments Team has developed requirements and methodologies to address the complex challenge of integrating multiple elements and visiting vehicles while maintaining the Gateway induced environments within prescribed limits. The Gateway Induced Environments requirements are summarized along with the integration / verification process and preliminary system analysis results.

Gateway↗
NASA NTRSDate not supplied

Gateway Induced Environments Overview

Gateway will be a long duration space station orbiting the Moon in support of NASA’s Artemis campaign. Over its lifetime, Gateway will be exposed to a variety of induced environments, including materials outgassing, chemical and electric thruster plumes, vacuum vents, and lunar dust transport (from the Human Lander System, HLS). Induced Environments can impact vehicle performance and mission success. The multidisciplinary Gateway Induced Environments Team has developed requirements and methodologies to address the complex challenge of integrating multiple elements and visiting vehicles while maintaining the Gateway induced environments within prescribed limits. The Gateway Induced Environments requirements are summarized along with the integration / verification process and preliminary system analysis results.

Gateway↗
NASA NTRS2025

Astronaut Physiological Deconditioning and Exercise Prescription Countermeasures in Spaceflight

The human skeletal muscular and cardiovascular systems are adapted to the upright posture of Earth’s gravitational environment. Astronauts experience an altered gravity environment in spaceflight that leads to a number of physiological changes and decrements to these systems that can decrease overall crew performance. Countermeasures, including prescribed exercise during spaceflight, is vital for astronauts to maintain optimal health and performance. The degree of physiological deconditioning is dependent on a multitude of factors such as sex, age, mission duration, fitness level, and gravity environments experienced. Deconditioning begins immediately upon entering an altered gravity environment and physiological decrements of the skeletal muscular and cardiovascular systems are measurable among astronauts within a few days. Thus, to maintain their physical fitness, ability to perform mission duties, and be able to egress vehicles when needed, it is imperative that astronauts participate in exercise during all phases of flight. This is especially important for long duration flights where deconditioning effects can be more deleterious. The NASA Office of the Chief Health and Medical Officer 3001 Standards Team develops requirements utilized by commercial and international partners to better understand spaceflight-induced physiological changes and countermeasures and expected outcomes with or without exercise.

exercise physiology↗
DOE OSTI2024

Measurement of the Neutron Electromagnetic Form Factor Ratio at High Momentum Transfer

The inner structure of the nucleon (proton and neutron) remains a topic of great interest in nuclear and particle physics, after many decades of study. For example, understanding the quark-gluon dynamics inside the nucleon would shed light on how 99% of the nucleon mass is created. The neutron electromagnetic form factors, Gn E and Gn M , give important insights into the neutron structure. The Super BigBite Spectrometer (SBS) program at Jefferson Lab (JLab) seeks to extend the form factor measurements for both the proton and the neutron. The neutron electric form actor, Gn E , has been historically difficult to measure due to the short lifetime of the free neutron and the small value of Gn E . The GEn-II experiment is part of the SBS program and seeks to measure Gn E , significantly increasing the high momentum transfer coverage. A newly designed polarized 3He target increased the figure of merit by three times compared to previous measurements. The analysis of this data is especially challenging due to the unprecedented high-rate environment caused by the open nature of the spectrometer with a direct line of sight to the target. This required developing new Gas Electron Multiplier (GEM) particle trackers which can cover large areas demanded by this setup and handle particle rates up to 500 kHz/cm2. Rates this high over a large area is unprecedented in particle tracking systems and came with a number of challenges. Data taken in the SBS program was critical to understanding hardware and software solutions that improved the track reconstruction efficiency to be >97% with a position resolution of 70 ?m. In previous experiments the proton electromagnetic form factors, Gp E and Gp M were measured up to Q2 = 8.5 GeV2 and Q2 = 30 GeV2, respectively, while Gn E has only been measured up to Q2 = 3.4 GeV2. The GEn-II experiment has measured the neutron form factor ratio, Gn E/Gn M, at Q2 values of 2.90, 6.50, and 9.47 GeV2 by scattering a polarized electron beam with a polarized 3He target, used here as an effective polarized neutron target, and measuring the double spin asymmetry of the cross section. Previous Gn E measurements do not extend above Q2 = 3.4 GeV2, and therefore this analysis has extended the world data by almost three times. The background correction is especially difficult at the higher Q2 settings leading to large systematic errors. As very exploratory results from this early analysis of the data, we find for Q2 = 2.90 GeV2, Gn E = 0.0157 ±stat 0.0016 ±sys 0.0011, for Q2 = 6.50 GeV2, Gn E = 0.0067 ±stat 0.0019 ±sys 0.0005, and for Q2 = 9.46 GeV2, Gn E = 0.0046 ±stat 0.0023 ±sys 0.0005. These results are compared to predictions from the Dyson-Schwinger Equations (DSE) model and a Relativistic Constituent Quark Model (RCQM).

Jeffas, Sean↗
NASA NTRS2015

Connecting Requirements to Architecture and Analysis via Model-Based Systems Engineering

In traditional systems engineering practice, architecture, concept development, and requirements development are related but still separate activities. Concepts for operation, key technical approaches, and related proofs of concept are developed. These inform the formulation of an architecture at multiple levels, starting with the overall system composition and functionality and progressing into more detail. As this formulation is done, a parallel activity develops a set of English statements that constrain solutions. These requirements are often called "shall statements" since they are formulated to use "shall." The separation of requirements from design is exacerbated by well-meaning tools like the Dynamic Object-Oriented Requirements System (DOORS) that remained separated from engineering design tools. With the Europa Clipper project, efforts are being taken to change the requirements development approach from a separate activity to one intimately embedded in formulation effort. This paper presents a modeling approach and related tooling to generate English requirement statements from constraints embedded in architecture definition.

Cole, Bjorn F.↗
NASA NTRS2008

EVA Hand Tool Design Considerations, Development, and General Requirements Interpretation: A Junior Engineer’s Guide

This paper serves as a guide to developing hand tools for use by crewmembers during extravehicular activity (EVA) in outer space. It outlines the fundamentals of EVAs and related provisions, providing a starting point and perspective for engineers unfamiliar with designing equipment to be used during manned spaceflight. Common EVA hardware constraints, which are often unclear, are interpreted and traced back to a source or justification because, as in any design field, fully understanding the basis and intent of a design requirement is needed to properly satisfy it. Lastly, miscellaneous design considerations and lessons learned in tool development are discussed. The information found within is drawn from commonly cited NASA and EVA related documents as well as from professional experiences.

EVA↗
NASA NTRS1987

Development of contamination requirements for spaceborne optical instrumentation

High performance satellites and critical surfaces aboard advanced long-life spacecraft require effective contamination control measures to maintain performance stability and to ensure data accuracy. Contamination is said to exist and be of concern if a spacecraft or launch vehicle produced material interferes with the intended performance of a surface or sensor. This paper will discuss the development of contamination requirements for spaceborne optical instrumentation. In addition, a comparison of instrument contamination requirements to measured instrument degradation levels for mission activities will be presented. If maintained, these requirements ensure against undesirable instrument degradation due to the contamination environment created by fabrication, launch, mission activities, ambient atmosphere and the instruments themselves.

Hansen, Patricia A.↗
NASA NTRS1979

Manned remote work station development article. Volume 2: Simulation requirements. Appendix A: Open cherry picker development test articles specification

A manned remote work station (MRWS) mission scenario, broken down into the three time phases was selected as the basis for analysis of the MRWS flight article requirements and concepts. The mission roles for the three time phases, supporting tradeoff and evaluation studies, was used to identify key issues requiring simulation. The MRWS is discussed in terms of its capability to perform such operations as support of Spacelab experiments, servicing and repair of satellites, and construction. Future considerations for the use of the MRWS are also given.

Source record↗
NASA NTRS2003

Meeting NASA's Mission Through Commercial Partnerships

This paper examines novel approaches to furthering NASA's missions through the use of commercial partnerships. The exploration of space ha proven to be a costly endeavor requiring the development of new technologies at significant expense. One of the prime factors holding bac the robust development of space is insufficient investment in the technologies necessary to make it a reality. The key to success in bringin needed space development technologies to maturation lies in bringing technology investors together from government, industry and academia. aggressive road map for developing space will require a diverse set of interest to industry or other government agencies. By having each invest( contributing to the part of the technology development of interest to them development of space systems can be put together at a cost far below wl would be required to develop for a stand-alone effort. The NASA Space Partnership Division has been employing this technique to leverage a 30 million dollar NASA investment into at 100 million dollar advanced technology development effort focused on meeting NASA's mission needs.

Nall, Mark↗
NASA NTRS1979

U.S. aerospace industry opinion of the effect of computer-aided prediction-design technology on future wind-tunnel test requirements for aircraft development programs

A survey of the U.S. aerospace industry in late 1977 suggests that there will be an increasing use of computer-aided prediction-design technology (CPD Tech) in the aircraft development process but that, overall, only a modest reduction in wind-tunnel test requirements from the current level is expected in the period through 1995. Opinions were received from key spokesmen in 23 of the 26 solicited major companies or corporate divisions involved in the design and manufacture of nonrotary wing aircraft. Development programs for nine types of aircraft related to test phases and wind-tunnel size and speed range were considered.

Treon, S. L.↗
NASA NTRS1979

Future planetary probes for Jupiter and Saturn

The paper describes a study conducted to identify the technology developments that would allow deep atmospheric investigations of Jupiter and Saturn to proceed beyond currently planned investigation of the upper atmosphere. The study considered a deep probe mission that would provide the capability to scientifically examine planetary atmospheres to the 1000-bar level and 1400-K level. The major conclusions of the study are that (1) a probe designed for Jupiter can be used with minor changes for Saturn, (2) new science instrument technology developments are required, and (3) the only new technology developments required in the engineering subsystem are high pressure thermal insulation materials and advanced data processing techniques.

Butts, A. J.↗