Search NASA⌕ Search

SEARCH · Search NASA

Results for “STATISTICAL MODELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Calculation of spin distribution for several fission reaction systems induced by nucleons and heavy ions

Compound nucleus spin distribution has been calculated for several fission reaction systems induced by nucleons and heavy ions. Determination of the spin distribution for these systems is based upon the comparison between the experimental data of the fission fragment angular distributions as well as the prediction of the standard saddle-point statistical model (SSPSM). For the systems, the two cases, namely with and without neutron emission corrections were considered. This method is used for the first time to determine compound nucleus spin distribution. Afterwards, our theoretical results have been compared with the data obtained from the coupled-channel technique as well as the Wong model, and satisfactory agreements were found. Furthermore, we have introduced a semiclassical approximation relation for the compound nucleus spin distribution of these systems.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Model for ratchet growth in PBX 9502

Polycrystalline solids composed of crystals with anisotropic thermal expansion coefficients exhibit ratchet growth (RG), a phenomenon characterized by a cumulative and irreversible volume expansion that develops upon exposing the material to cyclic excursions in temperature. We developed a statistical model for RG. The model attributes RG to the formation of intergranular cracks caused by tessellated internal stresses that develop during the thermal excursions. It is postulated that different sets of internal cracks form upon heating and cooling the polycrystalline solid. The model reproduces RG measurements in pressed TATB and PBX 9502 energetic materials and suggests an explanation for why the amplitude of RG generated by a heating excursion is larger than that generated by a subsequent cooling excursion of the same amplitude.

36 MATERIALS SCIENCE↗

Effects of nuclear orientation on fusion and fission process for reactions using {sup 238}U target nucleus

Fission fragment mass distributions in the reaction of {sup 30}Si+{sup 238}U were measured at the energies around the Coulomb barrier. At the above-barrier energies, the mass distribution showed Gaussian shape. At the sub-barrier energies, asymmetric fission mode peaked at A{sub L}/A{sub H}approx =90/178 was observed. The asymmetric fission should be attributed to quasifission from the results of the measured evaporation residue (ER) cross-sections produced by {sup 30}Si+{sup 238}U. The cross-section for {sup 263}Sg at the above-barrier energy agree with the statistical model calculation which assumes that the measured fission cross-sections are equal to the fusion cross-sections, whereas the one for {sup 264}Sg measured at the sub-barrier energy is smaller than the calculation, indicating the presence for quasifission. The fragment mass distributions are compared to those for {sup 36}S+{sup 238}U and {sup 40}Ar+{sup 238}U.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Inclusive alpha-production cross section for the {sup 6}Li+{sup 90}Zr system at energies near the fusion barrier

Inclusive (direct+compound) alpha production for the {sup 6}Li+{sup 90}Zr system is measured at near barrier energies, namely, 15,17,19,21,25, and 30 MeV. The data are treated in the statistical model and distorted-wave Born approximation framework to disentangle the degree of competition between direct and compound reaction channels. A substantial contribution from the compound reaction channels is obtained but the direct reaction channels are found to be the dominant mechanism for alpha production at these energies. Estimation of the breakup and transfer reaction around the barrier shows that the latter is the dominant channel. Universal behavior of the alpha-production cross section is observed over a large range of target nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Particle ratios as a probe of the QCD critical temperature

We show how the measured particle ratios can be used to provide nontrivial information about the critical temperature of the QCD phase transition. This is obtained by including the effects of highly massive Hagedorn resonances on statistical models, which are used to describe hadronic yields. The inclusion of Hagedorn states creates a dependence of the thermal fits on the Hagedorn temperature, T{sub H}, which is assumed to be equal to T{sub c}, and leads to an overall improvement of thermal fits. We find that for Au+Au collisions at the Relativistic Heavy Ion Collider at {radical}(s{sub NN})=200 GeV the best square fit measure, {chi}{sup 2}, occurs at T{sub c{approx}}176 MeV and produces a chemical freeze-out temperature of 172.6 MeV and a baryon chemical potential of 39.7 MeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Evidence of quasifission in the {sup 16}O + {sup 238}U reaction at sub-barrier energies

Mass distribution of fission fragments and neutron multiplicity in the {sup 16}O+{sup 238}U reaction were measured at near- and below-barrier energies. A sudden change in the fragment mass width, observed in the present measurement, confirmed the transition to quasifission at below-barrier energies; the same was indicated earlier from the study of fission fragment angular anisotropy. However, the present measurement of prescission neutron multiplicity as well as the earlier measurement of evaporation residue yield did not indicate any significant departure from the respective statistical model predictions throughout the energy range. It is argued that the first two probes are more sensitive for highly asymmetric systems, whereas all probes would be useful and complimentary to each other for study of quasifission in more symmetric systems, where quasifission is more dominant.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Statistical description of the sol-gel transition in systems with thermoreversible chemical bonds

A general statistical model is proposed for describing network-forming systems. The model is based on the representation of the partition function for all possible configurations of a thermoreversible network in the form of a functional integral over a scalar field. According to this model, two types of first-order phase transitions can occur in the systems under consideration: macroscopic phase separation with the structural phase transition due to the change in the configuration of the spatial network and the sol-gel transition due to the formation of a thermoreversible percolation cluster consisting of bound structural units. A detailed analysis is performed of the thermodynamic and structural properties of a solution of monomers that have f functional groups and can form thermoreversible chemical bonds. The influence of specific features of the chemical and volume interactions on the phase diagram of the system is investigated. The mutual position of the sol-gel transition line and the phase diagram is determined for different model parameters. It is revealed that two substantially different regimes of the behavior of the sol-gel transition line in the 'temperature-volume fraction of structural units' plane are observed with a change in the rigidity of chemical bonds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modeling max-of-N fluence distribution using measured shot-to-shot beam contrast

We have found the local temporal shot-to-shot variation of the NIF high-energy laser system to be relatively constant ({approx}3.4% to 4.2% of the mean fluence). We have developed a statistical model that predicts the maximum fluence distribution any particular location will be exposed to after N independent shots (the so-called max-of-N fluence distribution) using the measured shot-to-shot variance; this method allows for an estimate of maximum optics fluence exposure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Cross sections and barriers for nuclear fission induced by high-energy nucleons

The cross sections for the fission of {sup 232}Th, {sup 235,238}U, {sup 237}Np, and {sup 239}Pu target nuclei that was induced by 20- to 1000-MeV neutrons and protons were calculated. The respective calculations were based on the multiconfiguration-fission (MCFx) model, which was used to describe three basic stages of the interaction of high-energy nucleons with nuclei: direct processes (intranuclear cascade), equilibration of the emerging compound system, and the decay of the compound nucleus (statistical model). Fission barriers were calculated within the microscopic approach for isotopic chains formed by 15 to 20 nuclei of the required elements. The calculated fission cross sections were compared with available experimental data. It was shown that the input data set and the theoretical model used made it possible to predict satisfactorily cross section for nuclear fission induced by 20- to 1000-MeV nucleons.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Pathologic Validation of a Model Based on Diffusion-Weighted Imaging and Dynamic Contrast-Enhanced Magnetic Resonance Imaging for Tumor Delineation in the Prostate Peripheral Zone

Purpose: For focal boost strategies in the prostate, the robustness of magnetic resonance imaging-based tumor delineations needs to be improved. To this end we developed a statistical model that predicts tumor presence on a voxel level (2.5 Multiplication-Sign 2.5 Multiplication-Sign 2.5 mm3) inside the peripheral zone. Furthermore, we show how this model can be used to derive a valuable input for radiotherapy treatment planning. Methods and Materials: The model was created on 87 radiotherapy patients. For the validation of the voxelwise performance of the model, an independent group of 12 prostatectomy patients was used. After model validation, the model was stratified to create three different risk levels for tumor presence: gross tumor volume (GTV), high-risk clinical target volume (CTV), and low-risk CTV. Results: The model gave an area under the receiver operating characteristic curve of 0.70 for the prediction of tumor presence in the prostatectomy group. When the registration error between magnetic resonance images and pathologic delineation was taken into account, the area under the curve further improved to 0.89. We propose that model outcome values with a high positive predictive value can be used to define the GTV. Model outcome values with a high negative predictive value can be used to define low-risk CTV regions. The intermediate outcome values can be used to define a high-risk CTV. Conclusions: We developed a logistic regression with a high diagnostic performance for voxelwise prediction of tumor presence. The model output can be used to define different risk levels for tumor presence, which in turn could serve as an input for dose planning. In this way the robustness of tumor delineations for focal boost therapy can be greatly improved.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

REACTION RATE SENSITIVITY OF {sup 44}Ti PRODUCTION IN MASSIVE STARS AND IMPLICATIONS OF A THICK TARGET YIELD MEASUREMENT OF {sup 40}Ca({alpha}, {gamma}){sup 44}Ti

We evaluate two dominant nuclear reaction rates and their uncertainties that affect {sup 44}Ti production in explosive nucleosynthesis. Experimentally we develop thick target yields for the {sup 40}Ca({alpha}, {gamma}){sup 44}Ti reaction at E {sub {alpha}} = 4.13, 4.54, and 5.36 MeV using {gamma}-ray spectroscopy. At the highest beam energy, we also performed an activation measurement which agrees with the thick target result. From the measured yields a stellar reaction rate was developed that is smaller than current statistical-model calculations and recent experimental results, which would suggest lower {sup 44}Ti production in scenarios for the {alpha}-rich freezeout. Special attention has been paid to assessing realistic uncertainties of stellar reaction rates produced from a combination of experimental and theoretical cross sections. With such methods, we also develop a re-evaluation of the {sup 44}Ti({alpha}, p){sup 47}V reaction rate. Using these two rates we carry out a sensitivity survey of {sup 44}Ti synthesis in eight expansions representing peak temperature and density conditions drawn from a suite of recent supernova explosion models. Our results suggest that the current uncertainty in these two reaction rates could lead to as large an uncertainty in {sup 44}Ti synthesis as that produced by different treatments of stellar physics.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

UNSUPERVISED TRANSIENT LIGHT CURVE ANALYSIS VIA HIERARCHICAL BAYESIAN INFERENCE

Historically, light curve studies of supernovae (SNe) and other transient classes have focused on individual objects with copious and high signal-to-noise observations. In the nascent era of wide field transient searches, objects with detailed observations are decreasing as a fraction of the overall known SN population, and this strategy sacrifices the majority of the information contained in the data about the underlying population of transients. A population level modeling approach, simultaneously fitting all available observations of objects in a transient sub-class of interest, fully mines the data to infer the properties of the population and avoids certain systematic biases. We present a novel hierarchical Bayesian statistical model for population level modeling of transient light curves, and discuss its implementation using an efficient Hamiltonian Monte Carlo technique. As a test case, we apply this model to the Type IIP SN sample from the Pan-STARRS1 Medium Deep Survey, consisting of 18,837 photometric observations of 76 SNe, corresponding to a joint posterior distribution with 9176 parameters under our model. Our hierarchical model fits provide improved constraints on light curve parameters relevant to the physical properties of their progenitor stars relative to modeling individual light curves alone. Moreover, we directly evaluate the probability for occurrence rates of unseen light curve characteristics from the model hyperparameters, addressing observational biases in survey methodology. We view this modeling framework as an unsupervised machine learning technique with the ability to maximize scientific returns from data to be collected by future wide field transient searches like LSST.

79 ASTRONOMY AND ASTROPHYSICS↗

Hybrid geological modeling: Combining machine learning and multiple-point statistics

Accurately modeling and constructing a geologically realistic subsurface model remains an outstanding problem as the morphology controls the flow behaviors. Particularly, one of the pattern-based methods, namely cross-correlation based simulation, has been proved to be an effective way to reconstruct a realistic model, at both small and large scales. However, conditioning to point data in the large-scale problems is still a crucial issue in these algorithms, since there is always a trade-off between the quality of the realizations and the degree of point data reproduction. Specifically, it is not practical to build a training image (TI) which includes all the possibilities and variabilities. Therefore, finding a pattern that can represent the point data and, at the same time, preserving the connectivities is difficult. This leads to producing highly-connected realizations with a significant mismatch or poor models with a reasonable degree of point data reproduction. To accurately reproduce the densely distributed hard data, pixel-based methods can also produce some unrealistic artifacts around the hard data. In this paper, to overcome this challenge, however, we use pattern-based methods as they often produce more disconnected geobodies when dealing with dense hard data, and proposed a hybrid algorithm using the pattern-based methods and convolutional neural network (CNN). The trained CNN model is utilized to improve the quality of conditioning to point data for the original realizations generated by the pattern-based algorithm. As such, the mismatch locations are identified, and the same regions are used in the training of CNN to mimic the procedure through which a missing region can be filled. To evaluate the performance of the proposed hybrid algorithm, it is tested on cases with different dimensions and different numbers of facies. Then, the newly improved realizations are compared with the initial realizations generated by the pattern-based algorithm. The comparison is also conducted by the flow simulation test. And it indicates that the proposed hybrid algorithm can better reproduce the point data, while the connectivities are better preserved.

58 GEOSCIENCES↗

Role of break-up processes in the fusion of the {sup 12}C+ {sup 52}Cr system

We present the results and analysis of our investigation of the role of break-up processes on the fusion of a {sup 12}C{sup 6+} beam with a {sup 52}Cr target near, at, and above the Coulomb barrier. In this experiment the excitation functions of evaporation residues produced via ({sup 12}C, 2n), ({sup 12}C, pxn), ({sup 12}C, {alpha}xn), and ({sup 12}C, {alpha}pxn) channels in a {sup 12}C + {sup 52}Cr reaction were measured at several beam energies ranging from {approx_equal}51 to 87 MeV by employing the recoil catcher technique followed by off-line {gamma}-ray spectrometry. The measured excitation functions were compared with theoretical values obtained using the pace4 statistical model code. Further, for a ({sup 12}C, p2n) channel the measured excitation function was compared with the predictions of the alice-91 code, which was chosen as it takes into account pre-equilibrium emissions. For non-{alpha}-emitting channels, the experimentally measured excitation functions--after correcting them for possible contributions from higher charge isobaric precursor decays--were, in general, found to be in good agreement with theoretical predictions. However, for {alpha}-emitting channels, the measured excitation functions had significantly more production cross sections than what pace4 predicted. This enhancement may be attributed to incomplete fusion processes. An attempt was made to estimate the incomplete fusion fraction in order to compare the relative importance of complete and incomplete fusion processes. The incomplete fusion fraction was found to be sensitive to the projectile energy and mass asymmetry of the entrance channel. We also discuss the results in terms of the impact of the frozen {alpha}-cluster structure of the {sup 12}C isotope on various fusion reactions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Machine Learning Approaches for Predicting Radiation Therapy Outcomes: A Clinician's Perspective

Radiation oncology has always been deeply rooted in modeling, from the early days of isoeffect curves to the contemporary Quantitative Analysis of Normal Tissue Effects in the Clinic (QUANTEC) initiative. In recent years, medical modeling for both prognostic and therapeutic purposes has exploded thanks to increasing availability of electronic data and genomics. One promising direction that medical modeling is moving toward is adopting the same machine learning methods used by companies such as Google and Facebook to combat disease. Broadly defined, machine learning is a branch of computer science that deals with making predictions from complex data through statistical models. These methods serve to uncover patterns in data and are actively used in areas such as speech recognition, handwriting recognition, face recognition, “spam” filtering (junk email), and targeted advertising. Although multiple radiation oncology research groups have shown the value of applied machine learning (ML), clinical adoption has been slow due to the high barrier to understanding these complex models by clinicians. Here, we present a review of the use of ML to predict radiation therapy outcomes from the clinician's point of view with the hope that it lowers the “barrier to entry” for those without formal training in ML. We begin by describing 7 principles that one should consider when evaluating (or creating) an ML model in radiation oncology. We next introduce 3 popular ML methods—logistic regression (LR), support vector machine (SVM), and artificial neural network (ANN)—and critique 3 seminal papers in the context of these principles. Although current studies are in exploratory stages, the overall methodology has progressively matured, and the field is ready for larger-scale further investigation.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Water retention and gas relative permeability of two industrial concretes

This experimental study aims at identifying the water retention properties of two industrial concretes to be used for long term underground nuclear waste storage structures. Together with water retention, gas transfer properties are identified at varying water saturation level, i.e. relative gas permeability is assessed directly as a function of water saturation level S{sub w}. The influence of the initial de-sorption path and of the subsequent re-saturation are analysed both in terms of water retention and gas transfer properties. Also, the influence of concrete microstructure upon water retention and relative gas permeability is assessed, using porosity measurements, analysis of the BET theory from water retention properties, and MIP. Finally, a single relative gas permeability curve is proposed for each concrete, based on Van Genuchten-Mualem's statistical model, to be used for continuous modelling approaches of concrete structures, both during drying and imbibition.

36 MATERIALS SCIENCE↗

Reactions involving loosely bound cluster nuclei: Heavy ions and new technologies

Experimental results on excitation functions for complete-fusion and transfer reactions in the interaction of {sup 6}He and {sup 6,8,9}Li nuclei with various target nuclei are presented. Data on fusion-reaction cross sections in the case of {sup 6}He differ strongly from the predictions of the statistical model. A strong enhancement of the cross section at barrier energies is observed for this reaction channel. Also, an increase in the cross sections for neutron-transfer reactions (in the case of {sup 6}He and {sup 8,9}Li beams) and deuteron-transfer reactions (in the case of {sup 6}Li) is observed in the deep-subbarrier energy region. The results are discussed from the point of view of the effect of the cluster structure of nuclei on the probability of interaction at barrier energies. The results of employing heavy-ion beams in new technologies are presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗