Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sigma Models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

The error associated with use of various forms of the divergence equation to diagnose geopotential and temperature

This study utilizes a model-generated data set to evaluate the errors associated with the diagnosis of geopotential height using three approximate forms of the divergence equation (DE). The DE was solved on the original sigma-coordinate surfaces of the model to exclude any error produced in the process of interpolating the data from observation points to the coordinate surface of the DE. An inviscid, nonlinear, divergent DE produced rms geopotential height errors as large as 3 m and rms temperature errors of over 26 C in the lower planetary boundary layer (PBL), with minimal errors above 800 mb. Elimination of the isobaric divergence in the velocity field caused additional height errors of 5-6 m and temperature errors of 0.4-1.2 C in the free troposphere. Use of a further-degraded DE without nonlinear terms caused height errors of 10-15 m in the upper troposphere with modestly increased temperature errors. Error fields at all levels had synoptic-scale features, with some mesoalpha structure. No spatial noise was apparent. Use of a temporal spectral filter to eliminate high-frequency modes from the model-generated data did not significantly influence the error associated with use of various forms of the DE.

Modica, George M.↗

S-wave meson scattering up to 2 GeV and its spectroscopy

We have performed a thorough study of the meson-meson S-waves with isospin (I) 0 and 1/2, up to {radical}(s){approx_equal}2 GeV. This is the first study that includes 13 channels that have their threshold below that energy. All the resonances below 2 GeV, namely the f{sub 0}(600) or {sigma}, f{sub 0}(980), f{sub 0}(1370), f{sub 0}(1500), f{sub 0}(1710) and f{sub 0}(1790) for I = 0, and the K{sub 0}*(800) or {kappa}, K{sub 0}*(1430) and K{sub 0}*(1950) for I = 1/2, are generated. We can then extract a clear picture of the spectroscopy, finding that the f{sub 0}(1710), together with an important contribution to the f{sub 0}(1500), are glueballs. Another pole, which corresponds mainly to the f{sub 0}(1370), is a pure octet I 0 state, and does not mix with the glueball.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

REPRODUCTION OF THE OBSERVED TWO-COMPONENT MAGNETIC HELICITY IN SOLAR WIND TURBULENCE BY A SUPERPOSITION OF PARALLEL AND OBLIQUE ALFVEN WAVES

The angular distribution of the normalized reduced magnetic helicity density ({sigma} r{sub m}) in solar wind turbulence reveals two components of distinct polarity in different angle ranges. This kind of two-component {sigma}{sup r}{sub m} may indicate the possible wave modes and power spectral densities (PSDs) of the turbulent fluctuations. Here we model the measured angular distribution of {sigma}{sup r}{sub m} by assuming a PSD distribution for Alfven fluctuations in wavevector space, and then fit the model results to the observations by adjusting the pattern of the PSD distribution. It is found that the two-component form of the PSD, which has a major and minor component close to k and k{sub ||}, respectively, seems to be responsible for the observed two-component {sigma}{sup r}{sub m}. On the other hand, both an isotropic PSD and a PSD with only a single component bending toward k fail to reproduce the observations. Moreover, it is shown that the effect of gradual balance between outward and inward wave-energy fluxes with decreasing spatial scale needs to be considered in order to reproduce the observed diminishing of |{sigma}{sup r}{sub m}| at shorter scales. Therefore, we suggest that the observed two-component {sigma}{sup r}{sub m} in the solar wind turbulence may be due to a superposition of Alfven waves with quasi-perpendicular (major part) and quasi-parallel (minor part) propagation. The waves seem to become gradually balanced toward shorter scales.

79 ASTRONOMY AND ASTROPHYSICS↗

K{sup -}p{yields}{sigma}{sup 0}{pi}{sup 0} reaction at low energies in a chiral quark model

A chiral quark-model approach is extended to the study of the KN scattering at low energies. The process K{sup -}p{yields}{sigma}{sup 0}{pi}{sup 0} at P{sub K} < or approx. 800 MeV/c (i.e., the center-of-mass energy W < or approx. 1.7 GeV) is investigated. This approach successfully describes the differential cross sections and total cross section with the roles of the low-lying {lambda} resonances in n=1 shells clarified. The {lambda}(1405)S{sub 01} dominates the reactions over the energy region considered here. Around P{sub K}{approx_equal}400 MeV/c, the {lambda}(1520)D{sub 03} is responsible for a strong resonant peak in the cross section. The {lambda}(1670)S{sub 01} has obvious contributions around P{sub K}=750 MeV/c, while the contribution of {lambda}(1690)D{sub 03} is less important in this energy region. The nonresonant background contributions, i.e., u channel and t channel, also play important roles in the explanation of the angular distributions due to amplitude interferences. The u channel turns out to have significant destructive interferences with the {lambda}(1405)S{sub 01} at the forward angles. In contrast, the t-channel K* exchange has a constructive interference at the forward angles, whereas it suppresses the cross sections slightly at the backward angles. In the t channel, the K* exchange is more dominant than the {kappa} exchange. Our analysis suggests that configuration mixing exists within the {lambda}(1405)S{sub 01} and {lambda}(1670)S{sub 01} and results in admixtures of the [70,{sup 2}1,1/2] and [70,{sup 2}8,1/2] configurations. The {lambda}(1405)S{sub 01} is dominated by [70,{sup 2}1,1/2], and {lambda}(1670)S{sub 01} by [70,{sup 2}8,1/2]. The mixing angle is also determined. The {lambda}(1520)D{sub 03} and {lambda}(1690)D{sub 03} are assigned as [70,{sup 2}1,3/2] and [70,{sup 2}8,3/2], respectively.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Stochastic machine learning via sigma profiles to build a digital chemical space

This work establishes a different paradigm on digital molecular spaces and their efficient navigation by exploiting sigma profiles. To do so, the remarkable capability of Gaussian processes (GPs), a type of stochastic machine learning model, to correlate and predict physicochemical properties from sigma profiles is demonstrated, outperforming state-of-the-art neural networks previously published. The amount of chemical information encoded in sigma profiles eases the learning burden of machine learning models, permitting the training of GPs on small datasets which, due to their negligible computational cost and ease of implementation, are ideal models to be combined with optimization tools such as gradient search or Bayesian optimization (BO). Gradient search is used to efficiently navigate the sigma profile digital space, quickly converging to local extrema of target physicochemical properties. While this requires the availability of pretrained GP models on existing datasets, such limitations are eliminated with the implementation of BO, which can find global extrema with a limited number of iterations. A remarkable example of this is that of BO toward boiling temperature optimization. Holding no knowledge of chemistry except for the sigma profile and boiling temperature of carbon monoxide (the worst possible initial guess), BO finds the global maximum of the available boiling temperature dataset (over 1,000 molecules encompassing more than 40 families of organic and inorganic compounds) in just 15 iterations (i.e., 15 property measurements), cementing sigma profiles as a powerful digital chemical space for molecular optimization and discovery, particularly when little to no experimental data is initially available.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Winter and summer simulations with the GLAS climate model

The GLAS climate model is a general circulation model based on the primitive equations in sigma coordinates on a global domain in the presence of orography. The model incorporates parameterizations of the effects of radiation, convection, large scale latent heat release, turbulent and boundary layer fluxes, and ground hydrology. Winter and summer simulations were carried out with this model, and the resulting data are compared to observations.

Shukla, J.↗

Modifications to the steady-state 41-node thermoregulatory model including validation of the respiratory and diffusional water loss equations

After the simplified version of the 41-Node Stolwijk Metabolic Man Model was implemented on the Sigma 3 and UNIVAC 1110 computers in batch mode, it became desirable to make certain revisions. First, the availability of time-sharing terminals makes it possible to provide the capability and flexibility of conversational interaction between user and model. Secondly, recent physiological studies show the need to revise certain parameter values contained in the model. Thirdly, it was desired to make quantitative and accurate predictions of evaporative water loss for humans in an orbiting space station. The result of the first phase of this effort are reported.

Source record↗

FORECAST FOR THE PLANCK PRECISION ON THE TENSOR-TO-SCALAR RATIO AND OTHER COSMOLOGICAL PARAMETERS

The Planck satellite, successfully launched on 2009 May 14 to measure with unprecedented accuracy the primary cosmic microwave background (CMB) anisotropies, is operating as expected. The Standard Model of the Universe ('concordance' model) provides the current realistic context to analyze the CMB and other cosmological/astrophysical data, inflation in the early universe being part of it. The Planck performance for the crucial primordial parameter r, the tensor-to-scalar ratio related to primordial B-mode polarization, will depend on the quality of data analysis and interpretation. The Ginzburg-Landau (G-L) approach to inflation allows us to take high benefit of the CMB data. The fourth-degree double-well inflaton potential gives an excellent fit to the current CMB+LSS data. We evaluate the Planck precision to the recovery of cosmological parameters, taking into account a reasonable toy model for residuals of systematic effects of instrumental and astrophysical origin based on publicly available information. We use and test two relevant models: the {Lambda}CDMr model, i.e., the standard {Lambda}CDM model augmented by r, and the {Lambda}CDMrT model, where the scalar spectral index, n{sub s} , and r are related through the theoretical 'banana-shaped' curve r = r(n{sub s}) coming from the G-L theory with a double-well inflaton potential. In the latter case, the analytical expressions for n{sub s} and r are imposed as a hard constraint in a Monte Carlo Markov Chain (MCMC) data analysis. We consider two C{sub l}-likelihoods (with and without B modes) and take into account the white noise sensitivity of Planck (LFI and HFI) in the 70, 100, and 143 GHz channels as well as the residuals from systematic errors and foregrounds. We also consider a cumulative channel of the three mentioned. We produce the sky (mock data) for the CMB multipoles C{sup TT}{sub l} , C{sup TE}{sub l} , C{sup EE}{sub l} , and C{sup BB}{sub l} from the {Lambda}CDMr and {Lambda}CDMrT models and obtain the cosmological parameter marginalized likelihood distributions for the two models. Foreground residuals affect only the cosmological parameters sensitive to the B modes. As expected, the likelihood r distribution is more clearly peaked near the fiducial value (r = 0.0427) in the {Lambda}CDMrT model than in the {Lambda}CDMr model. The best value for r in the presence of residuals turns out to be about r {approx_equal} 0.04 for both the {Lambda}CDMr and the {Lambda}CDMrT models. The {Lambda}CDMrT model is very stable; its distributions do not change by including residuals and the B modes. For r we find 0.028 < r < 0.116 at a 95% confidence level (CL) with the best value r = 0.04. We also compute the B mode detection probability by the most sensitive HFI-143 channel. At the level of foreground residual equal to 30% of our toy model, only a 68% CL (1{sigma}) detection is very likely. For a 95% CL detection (2{sigma}), the level of foreground residual should be reduced to 10% or lower of the adopted toy model. The lower bounds (and most probable value) we infer for r support the searching of CMB B-mode polarization in the current data as well as the planned CMB missions oriented toward B polarization.

79 ASTRONOMY AND ASTROPHYSICS↗

Space Storable Rocket Technology (SSRT) basic program

The Space Storable Rocket Technology Program (SSRT) was conducted to establish a technology for a new class of high performance and long life bipropellant engines using space storable propellants. The results are described. Task 1 evaluated several characteristics for a number of fuels to determine the best space storable fuel for use with LO2. The results indicated that LO2-N2H4 is the best propellant combination and provides the maximum mission/system capability maximum payload into GEO of satellites. Task 2 developed two models, performance and thermal. The performance model indicated the performance goal of specific impulse greater than or = 340 seconds (sigma = 204) could be achieved. The thermal model was developed and anchored to hot fire test data. Task 3 consisted of design, fabrication, and testing of a 200 lbf thrust test engine operating at a chamber pressure of 200 psia using LO2-N2H4. A total of 76 hot fire tests were conducted demonstrating performance greater than 340 (sigma = 204) which is a 25 second specific impulse improvement over the existing highest performance flight apogee type engines.

Chazen, M. L.↗

A MEASUREMENT OF THE DAMPING TAIL OF THE COSMIC MICROWAVE BACKGROUND POWER SPECTRUM WITH THE SOUTH POLE TELESCOPE

We present a measurement of the angular power spectrum of the cosmic microwave background (CMB) using data from the South Pole Telescope (SPT). The data consist of 790 deg{sup 2} of sky observed at 150 GHz during 2008 and 2009. Here we present the power spectrum over the multipole range 650 < l < 3000, where it is dominated by primary CMB anisotropy. We combine this power spectrum with the power spectra from the seven-year Wilkinson Microwave Anisotropy Probe (WMAP) data release to constrain cosmological models. We find that the SPT and WMAP data are consistent with each other and, when combined, are well fit by a spatially flat, {Lambda}CDM cosmological model. The SPT+WMAP constraint on the spectral index of scalar fluctuations is n{sub s} = 0.9663 {+-} 0.0112. We detect, at {approx}5{sigma} significance, the effect of gravitational lensing on the CMB power spectrum, and find its amplitude to be consistent with the {Lambda}CDM cosmological model. We explore a number of extensions beyond the {Lambda}CDM model. Each extension is tested independently, although there are degeneracies between some of the extension parameters. We constrain the tensor-to-scalar ratio to be r < 0.21 (95% CL) and constrain the running of the scalar spectral index to be dn{sub s} /dln k = -0.024 {+-} 0.013. We strongly detect the effects of primordial helium and neutrinos on the CMB; a model without helium is rejected at 7.7{sigma}, while a model without neutrinos is rejected at 7.5{sigma}. The primordial helium abundance is measured to be Y{sub p} = 0.296 {+-} 0.030, and the effective number of relativistic species is measured to be N{sub eff} = 3.85 {+-} 0.62. The constraints on these models are strengthened when the CMB data are combined with measurements of the Hubble constant and the baryon acoustic oscillation feature. Notable improvements include n{sub s} = 0.9668 {+-} 0.0093, r < 0.17 (95% CL), and N{sub eff} = 3.86 {+-} 0.42. The SPT+WMAP data show a mild preference for low power in the CMB damping tail, and while this preference may be accommodated by models that have a negative spectral running, a high primordial helium abundance, or a high effective number of relativistic species, such models are disfavored by the abundance of low-redshift galaxy clusters.

79 ASTRONOMY AND ASTROPHYSICS↗

THE HALO MASS FUNCTION FROM EXCURSION SET THEORY. II. THE DIFFUSING BARRIER

In excursion set theory, the computation of the halo mass function is mapped into a first-passage time process in the presence of a barrier, which in the spherical collapse model is a constant and in the ellipsoidal collapse model is a fixed function of the variance of the smoothed density field. However, N-body simulations show that dark matter halos grow through a mixture of smooth accretion, violent encounters, and fragmentations, and modeling halo collapse as spherical, or even as ellipsoidal, is a significant oversimplification. In addition, the very definition of what is a dark matter halo, both in N-body simulations and observationally, is a difficult problem. We propose that some of the physical complications inherent to a realistic description of halo formation can be included in the excursion set theory framework, at least at an effective level, by taking into account that the critical value for collapse is not a fixed constant {delta}{sub c}, as in the spherical collapse model, nor a fixed function of the variance {sigma} of the smoothed density field, as in the ellipsoidal collapse model, but rather is itself a stochastic variable, whose scatter reflects a number of complicated aspects of the underlying dynamics. Solving the first-passage time problem in the presence of a diffusing barrier we find that the exponential factor in the Press-Schechter mass function changes from exp{l_brace}-{delta}{sup 2}{sub c}/2{sigma}{sup 2{r_brace}} to exp{l_brace}-a{delta}{sup 2}{sub c}/2{sigma}{sup 2{r_brace}}, where a = 1/(1 + D{sub B}) and D{sub B} is the diffusion coefficient of the barrier. The numerical value of D{sub B} , and therefore the corresponding value of a, depends among other things on the algorithm used for identifying halos. We discuss the physical origin of the stochasticity of the barrier and, from recent N-body simulations that studied the properties of the collapse barrier, we deduce a value D{sub B} {approx_equal} 0.25. Our model then predicts a {approx_equal} 0.80, in excellent agreement with the exponential fall off of the mass function found in N-body simulations, for the same halo definition. Combining this result with the non-Markovian corrections computed in Paper I of this series, we derive an analytic expression for the halo mass function for Gaussian fluctuations and we compare it with N-body simulations.

79 ASTRONOMY AND ASTROPHYSICS↗

EVIDENCE FOR LOW BLACK HOLE SPIN AND PHYSICALLY MOTIVATED ACCRETION MODELS FROM MILLIMETER-VLBI OBSERVATIONS OF SAGITTARIUS A*

Millimeter very long baseline interferometry (mm-VLBI) provides the novel capacity to probe the emission region of a handful of supermassive black holes on sub-horizon scales. For Sagittarius A* (Sgr A*), the supermassive black hole at the center of the Milky Way, this provides access to the region in the immediate vicinity of the horizon. Broderick et al. have already shown that by leveraging spectral and polarization information as well as accretion theory, it is possible to extract accretion-model parameters (including black hole spin) from mm-VLBI experiments containing only a handful of telescopes. Here we repeat this analysis with the most recent mm-VLBI data, considering a class of aligned, radiatively inefficient accretion flow (RIAF) models. We find that the combined data set rules out symmetric models for Sgr A*'s flux distribution at the 3.9{sigma} level, strongly favoring length-to-width ratios of roughly 2.4:1. More importantly, we find that physically motivated accretion flow models provide a significantly better fit to the mm-VLBI observations than phenomenological models, at the 2.9{sigma} level. This implies that not only is mm-VLBI presently capable of distinguishing between potential physical models for Sgr A*'s emission, but further that it is sensitive to the strong gravitational lensing associated with the propagation of photons near the black hole. Based upon this analysis we find that the most probable magnitude, viewing angle, and position angle for the black hole spin are a = 0.0{sup +0.64+0.86}, {theta}=68{sup o+5o+9o}{sub -20}{sup o}{sub -28}{sup o}, and {xi}=-52{sup o+17o+33o}{sub -15}{sup o}{sub -24}{sup o} east of north, where the errors quoted are the 1{sigma} and 2{sigma} uncertainties.

79 ASTRONOMY AND ASTROPHYSICS↗

The Role of Phytoplankton Biomacromolecules in Controlling Ocean Surface Roughness

Satellite altimetric data routinely map sea surface topography by measuring the ocean return signal. One source of altimeter measurement contamination occurs when the radar ocean backscatter becomes unusually large, a situation termed a Sigma-0 bloom. Past research suggests Sigma-0 blooms are associated with weak wind and natural surface slick conditions where capillary waves at the air–sea interface are suppressed. To date, no explicit connection between these conditions and Sigma-0 bloom presence has been provided. Using a series of simplified equations, our reduced model determines capillary wave heights from estimates of planktonic carbon concentrations and regional wind speed. Our results suggest that the radar signal reflection increases as capillary wave height decreases. This relationship depends on surfactant concentration, surfactant composition, and wind speed. Model sensitivity analysis indicates that the interface reflectivity depends on biological activity and wind speed. Our proposed simplified model provides a method to identify potential Sigma-0 bloom regions. We conclude that because of the demonstrated impact of biological surfactants on ocean roughness, it is necessary to consider the biological activity, i.e., phytoplankton bloom events, when interpreting signals from radar altimetry and when developing ocean hydrology models.

54 ENVIRONMENTAL SCIENCES↗

Thermal aging modeling and validation on the Mo-containing Fe-Cr-Ni alloys

Thermodynamics of intermetallic phases in Fe-rich Fe-Cr-Ni-Mo alloys is critical knowledge to understand thermal aging effect on the phase stability of Mo-containing austenitic steels, which subsequently facilitates alloy design/improvement and degradation mitigation of these materials for reactor applications. Among the intermetallic phases, Chi (χ), Laves, and Sigma (σ) are often of concern because of their tendency to cause embrittlement of the materials. The focus of this study is thermal stability of the Chi and Laves phases as they were less studied compared to the Sigma phase. Coupled with thermodynamic modeling, thermal stability of intermetallic phases in Mo containing Fe-Cr-Ni alloys was investigated at 1000, 850 and 700°C for different annealing times. The morphologies, compositions and crystal structures of the precipitates of the intermetallic phases were carefully examined by scanning electron microscopy, electron probe microanalysis, X-ray diffraction, and transmission electron microscopy. Three key findings resulted from this study. First, the Chi phase is stable at high temperature, and with decreasing temperature it transforms into the Laves phase that is stable at low temperature. Secondly, Cr, Mo, Ni are soluble in both the Chi and Laves phases, with the solubility of Mo playing a major role in the relative stability of the intermetallic phases. Thirdly, in situ transformation from Chi phase to Laves phase was directly observed, which increased the local strain field, generated dislocations in the intermetallic phases, and altered the precipitate phase orientation relationship with the austenitic matrix. The thermodynamic models that were developed and validated were then applied to evaluating the effect of Mo on the thermal stability of intermetallic phases in type 316 and NF709 stainless steels.

36 MATERIALS SCIENCE↗

Using Deep Learning Techniques to Search for the MiniBooNE Low Energy Excess in MicroBooNE with > 3$\sigma$ Sensitivity

This thesis describes an analysis developed for the MicroBooNE experiment to investigate an anomalous excess of electron-like events observed in the MiniBooNE detector. The hypothesis investigated here is that the MiniBooNE anomaly represents appearance of electron neutrinos. Using an amalgam of novel Deep Learning and standard algorithmic techniques this analysis reconstructs and identifies a highly pure sample of charged current quasi-elastic muon neutrino and electron neutrino interactions. This thesis describes the steps in the analysis chain and provides data-to-simulation comparisons for each step that establish confidence in the final prediction. When interpreted in the context of a $\nu e$ appearance like model, this analysis predicts a 3.2$\sigma$ sensitivity to exclude a standard model fluctuation which would appear as a MiniBooNE like anomaly using $7\times10^{20}$ protons on target of MicroBooNE Data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Influence of Ply Waviness on Fatigue Life of Tapered Composite Flexbeam Laminates

Nonlinear tapered flexbeam laminates, with significant ply waviness, were cut from a full-size composite rotor hub flexbeam. The specimens were tested under combined axial tension and cyclic bending loads. All of the specimens had wavy plies through the center and near the surfaces (termed marcelled areas), although for some of the specimens the surface marcels were very obvious, and for others they were much smaller. The specimens failed by first developing cracks through the marcels at the surfaces, and then delaminations grew from those cracks, in both directions. Delamination failure occurred in these specimens at significantly shorter fatigue lives than similar specimens without waviness, tested in ref. 2. A 2D finite element model was developed which closely approximated the flexbeam geometry, boundary conditions, and loading. In addition, the FE model duplicated the waviness observed in one of the test specimens. The model was analyzed using a geometrically nonlinear FE code. Modifications were made to the original model to reduce the amplitude of the marcels near the surfaces. The analysis was repeated for each modification. Comparisons of the interlaminar normal stresses, sigma(sub n), in the various models showed that under combined axial-tension and cyclic-bending loading, for marcels of the same aspect ratio, sigma(sub n) stresses increased as the distance along the taper, from thick to thin end, increased. For marcels of the same aspect ratio and at the same X-location along the taper, sigma(sub n) stresses decreased as the distance from the surface into the flexbeam interior increased. A technique was presented for determining the smallest acceptable marcel aspect ratio at various locations in the flexbeam.

Murri, Gretchen B.↗