Search NASA⌕ Search

SEARCH · Search NASA

Results for “Simulation and Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Importance of the Annual Cycles of SST and Solar Irradiance for Circulation and Rainfall: A Climate Model Simulation Study

Annual cycle of climate and precipitation is related to annual cycle of sunshine and sea-surface temperatures. Understanding its behavior is important for the welfare of humans worldwide. For example, failure of Asian monsoons can cause widespread famine and grave economic disaster in the subtropical regions. For centuries meteorologists have struggled to understand the importance of the summer sunshine and associated heating and the annual cycle of sea-surface temperatures (SSTs) on rainfall in the subtropics. Because the solar income is pretty steady from year to year, while SSTs depict large interannual variability as consequence of the variability of ocean dynamics, the influence of SSTs on the monsoons are better understood through observational and modeling studies whereas the relationship of annual rainfall to sunshine remains elusive. However, using NASA's state of the art climate model(s) that can generate realistic climate in a computer simulation, one can answer such questions. We asked the question: if there was no annual cycle of the sunshine (and its associated land-heating) or the SST and its associated influence on global circulation, what will happen to the annual cycle of monsoon rains? By comparing the simulation of a 4-year integration of a baseline Control case with two parallel anomaly experiments: 1) with annual mean solar and 2) with annual mean sea-surface temperatures, we were able to draw the following conclusions: (1) Tropical convergence zone and rainfall which moves with the Sun into the northern and southern hemispheres, specifically over the Indian, African, South American and Australian regions, is strongly modulated by the annual cycles of SSTs as well as solar forcings. The influence of the annual cycle of solar heating over land, however, is much stronger than the corresponding SST influence for almost all regions, particularly the subtropics; (2) The seasonal circulation patterns over the vast land-masses of the Northern Hemisphere at mid and high latitudes also get strongly influenced by the annual cycles of solar heating. The SST influence is largely limited to the oceanic regions of these latitudes; (3) The annual mode of precipitation over Amazonia has an equatorial regime revealing a maxima in the month of March associated with SST, and another maxima in the month of January associated with the solar annual cycles, respectively. The baseline simulation, which has both annual cycles, depicts both annual modes and its rainfall is virtually equal to the sum of those two modes; (4) Rainfall over Sahelian-Africa is significantly reduced (increased) in simulations lacking (invoking) solar irradiation with (without) the annual cycle. In fact, the dominant influence of solar irradiation emerges in almost all monsoonal-land regions: India, Southeast Asia, as well as Australia. The only exception is the Continental United States, where solar annual cycle shows only a relatively minor influence on the annual mode of rainfall.

Sud, Yogesh C.↗

The Effects of a 1998 Observing System Change on MERRA-2-Based Ozone Profile Simulations

Model simulations of ozone (O3) driven by meteorological reanalyses are useful for filling observational gaps and interpreting observed O3 variability and trends. However, the transport circulation of reanalysis products is impacted by changes to the observing system (the data assimilated into the reanalyses). We examine the impacts of these changes on simulated O3 from two models, Global Modeling Initiative (GMI) Chemistry Transport Model (GMI CTM) and Modern‐Era Retrospective Analysis for Research Applications version 2 (MERRA‐2) GMI Replay (M2 GMI Replay) simulation, using observations from global ozonesondes (>50,000 profiles) and satellites from 1980 to 2016. Both models are constrained by meteorology from the NASA MERRA‐2 reanalysis, and both use versions of NASA's GMI chemical mechanism. We focus on an observing system change affecting simulated O3 after 1998, associated with the assimilation of temperature and humidity data from new microwave profiling satellites. A large post‐1998 O3 increase, mainly confined to 15–20‐km altitude, of ~10 Dobson units (DU) in midlatitudes occurs in the GMI CTM, worsening the bias compared to observations. In contrast, an increase in M2 GMI Replay simulation O3 of ~10 DU is observed only near −60° latitude, reducing the bias compared to observations. The GMI CTM O3 high biases display a Quasi‐Biennial Oscillation (QBO)‐like periodicity that result from excessive transport from the tropical stratosphere to the midlatitude lower stratosphere during the QBO westerly phase. We quantify O3 discontinuities caused by MERRA‐2 observing system changes and demonstrate how the MERRA‐2 Global Modeling Initiative Replay simulation dampens the effects of these changes and QBO‐driven artifacts on simulated lower stratospheric and total O3. We caution against using simulations driven by a reanalysis to derive multidecadal O3 trends, especially prior to 1998.

Replay↗

First-principles and model simulation of all-optical spin reversal

All-optical spin switching is a potential trailblazer for information storage and communication at an unprecedented fast rate free of magnetic fields. However, the current wisdom is largely based on semiempirical models of effective magnetic fields and heat pulses, so it is difficult to provide high-speed design protocols for actual devices. In this paper we carry out a massively parallel first-principles and model calculation for 13 spin systems and magnetic layers, free of any effective field, to establish a simpler and alternative paradigm of laser-induced ultrafast spin reversal and to point out a path to a full-integrated photospintronic device. It is the interplay of the optical selection rule and sublattice spin orderings that underlines seemingly irreconcilable helicity-dependent and -independent switchings. Using realistic experimental parameters, we predict that strong ferrimagnets, in particular, Laves phase C15 rare-earth alloys, meet the telecommunication energy requirement of 10 fJ, thus allowing a cost-effective subpicosecond laser to switch spin in the gigahertz region.

36 MATERIALS SCIENCE↗

Modeling, simulation, and analysis of optical remote sensing systems

Remote Sensing of the Earth's resources from space-based sensors has evolved in the past 20 years from a scientific experiment to a commonly used technological tool. The scientific applications and engineering aspects of remote sensing systems have been studied extensively. However, most of these studies have been aimed at understanding individual aspects of the remote sensing process while relatively few have studied their interrelations. A motivation for studying these interrelationships has arisen with the advent of highly sophisticated configurable sensors as part of the Earth Observing System (EOS) proposed by NASA for the 1990's. Two approaches to investigating remote sensing systems are developed. In one approach, detailed models of the scene, the sensor, and the processing aspects of the system are implemented in a discrete simulation. This approach is useful in creating simulated images with desired characteristics for use in sensor or processing algorithm development. A less complete, but computationally simpler method based on a parametric model of the system is also developed. In this analytical model the various informational classes are parameterized by their spectral mean vector and covariance matrix. These class statistics are modified by models for the atmosphere, the sensor, and processing algorithms and an estimate made of the resulting classification accuracy among the informational classes. Application of these models is made to the study of the proposed High Resolution Imaging Spectrometer (HRIS). The interrelationships among observational conditions, sensor effects, and processing choices are investigated with several interesting results.

Kerekes, John Paul↗

Quench process modeling & simulation in the heat-treatment of critical aerospace components

To manufacture light-weight, advanced metal alloy components for gas turbine engines, quench heat-treatment processes are typically used. By quenching the component from elevated temperatures, the alloy sometimes undergoes a solid-state phase transformation which produces special microstructures with the required, enhanced mechanical properties. However, the quenching can also lead to cracks forming in the component. Addressing the quench cracking problems adds a significant burden to the cost, schedule, and energy demand of manufacture. Currently, optimizing the quench process to mitigate or avoid the cracking is performed largely by trial-and-error, relying heavily on costly experimental (thermocouple)trials to understand the local thermal gradients which cause the cracks to form. In this first part (Phase 1) of the work, high-performance computing is employed to establish the ability of modern CFD (computational fluid dynamics) to alleviate or wholly replace the experimental quenching trials by virtual testing. A Baseline CFD model is defined and its accuracy established to be comparable to(and which usually exceeds) the accuracy of existing HTC (heat-transfer coefficient) based simulation methods of quenching. As a first-principles based approach, “calibration” of the Baseline CFD model is independent of the quench process itself, but instead relies on the accuracy of the underlying (modeled),generic two-phase fluid processes which cannot be currently resolved by CFD for large, industrial-scale cases. A novel, high-fidelity DNS capability has been developed and verified to examine and further improve upon the mean-field closure submodels on which the Baseline CFD approach is based.1

99 GENERAL AND MISCELLANEOUS↗

Finite element model-simulation-based characterization of a magnetostrictive gyrosensor

This paper analyzes a prototype microgyrosensor that employs the magnetostrictive alloy Galfenol for transduction of Coriolis-induced forces into an electrical output for quantifying a given angular velocity. The magnetic induction distribution in the Galfenol sensor patch depends on its bending shape and magnetoelastic properties and is investigated using a finite element model. Fluctuations in magnetic induction caused by a sinusoidal rotation of the sensor produce an amplitude modulated voltage in a surrounding coil which is simulated and measured.

36 MATERIALS SCIENCE↗

Quench process modeling & simulation in the heat-treatment of critical aerospace components

To manufacture light-weight, advanced metal alloy components for gas turbine engines, quench heat-treatment processes are typically used. By quenching the component from elevated tempera-tures, the alloy sometimes undergoes a solid-state phase transformation which produces special microstructures with the required, enhanced mechanical properties. However, the quenching can also lead to cracks forming in the component. Addressing the quench cracking problems adds a significant burden to the cost, schedule, and energy demand of manufacture. Currently, optimizing the quench process to mitigate or avoid the cracking is performed largely by trial-and-error, relying heavily on costly experimental (thermocouple) trials to understand the local thermal gradients which cause the cracks to form. In this first part (Phase 1) of the work, high-performance computing is employed to establish the ability of modern CFD (computational fluid dynamics) to alleviate or wholly replace the experimental quenching trials by virtual testing. A baseline CFD model is defined and its accuracy established to be comparable to (and which usually exceeds) the accuracy of existing HTC (heat-transfer correlation) based simulation methods of quenching. As a first-principles based approach, “calibration” of the Baseline CFD model is independent of the quench process itself, but instead relies on the accuracy of the underlying (modeled), generic two-phase fluid processes which cannot be currently resolved by CFD for large, industrial-scale cases. A novel, high-fidelity DNS capability has been developed and verified to examine and further improve upon the mean-field closure submodels on which the Baseline CFD approach is based.

36 MATERIALS SCIENCE↗

Northern Hemisphere Snow Drought in Earth System Model Simulations and ERA5‐Land Data in 1980–2014

Abstract Low snow levels over the past few decades and predictions of a low‐to‐no snow future have spurred research into snow droughts, which pose a threat to water security and management. Systematic data‐model comparisons of snow drought have been lacking, hindering our understanding of the drivers of snow drought in the past. To address this gap, we analyzed snow drought events using standardized snow water equivalent index derived from monthly results of four numerical experiments using the E3SM Land Model (ELM) and ERA5‐Land data during the period of 1980–2014. Additionally, we compared snow drought duration calculated from models with those from the ERA5‐Land data during selected El Niño‐Southern Oscillation (ENSO) years. The numerical experiments were conducted with ELM driven by two prescribed atmospheric forcings, and with the coupled land‐atmosphere configuration of E3SM with and without plant hydraulics scheme feedback. Analysis reveals that 20%–30% of snow droughts occur due to factors other than above‐normal temperature and low snowfall, such as low soil moisture, warm soil temperature, and low relative humidity, etc., especially in high latitudes (50° North). Furthermore, our study highlights the exacerbating effect of ENSO events on snow drought conditions in various regions, despite some discrepancies between model and ERA5‐Land results. We also identified limitations of the coupled land‐atmosphere models in our current configuration in capturing the spatial patterns of snow droughts. This study underscores the challenge of predicting and mitigating snow drought and the need for a comprehensive understanding of the factors contributing to snow drought.

54 ENVIRONMENTAL SCIENCES↗

Regional-Scale Climate Change: Observations and Model Simulations

This collaborative proposal addressed key issues in understanding the Earth's climate system, as highlighted by the U.S. Climate Science Program. The research focused on documenting past climatic changes and on assessing future climatic changes based on suites of global and regional climate models. Geographically, our emphasis was on the mountainous regions of the world, with a particular focus on the Neotropics of Central America and the Hawaiian Islands. Mountain regions are zones where large variations in ecosystems occur due to the strong climate zonation forced by the topography. These areas are particularly susceptible to changes in critical ecological thresholds, and we conducted studies of changes in phonological indicators based on various climatic thresholds.

54 ENVIRONMENTAL SCIENCES↗

Hypersonic vehicle simulation model: Winged-cone configuration

Aerodynamic, propulsion, and mass models for a generic, horizontal-takeoff, single-stage-to-orbit (SSTO) configuration are presented which are suitable for use in point mass as well as batch and real-time six degree-of-freedom simulations. The simulations can be used to investigate ascent performance issues and to allow research, refinement, and evaluation of integrated guidance/flight/propulsion/thermal control systems, design concepts, and methodologies for SSTO missions. Aerodynamic force and moment coefficients are given as functions of angle of attack, Mach number, and control surface deflections. The model data were estimated by using a subsonic/supersonic panel code and a hypersonic local surface inclination code. Thrust coefficient and engine specific impulse were estimated using a two-dimensional forebody, inlet, nozzle code and a one-dimensional combustor code and are given as functions of Mach number, dynamic pressure, and fuel equivalence ratio. Rigid-body mass moments of inertia and center of gravity location are functions of vehicle weight which is in turn a function of fuel flow.

Shaughnessy, John D.↗

The Diurnal Cycle in TOGA-COARE: Regional Scale Model Simulations

The diurnal variation of precipitation processes over the tropics is a well-known phenomenon and has been studied using surface rainfall data, radar reflectivity data, and satellite-derived cloudiness and precipitation. Recently, analyzed observations from Tropical Oceans and Global Atmosphere Coupled Ocean-Atmosphere Response Experiment (TOGA COARE) in the tropical western Pacific ocean to study the relevant mechanisms producing diurnal variation of precipitation. They found that the diurnal Sea surface temperature (SST) cycle is important for afternoon showers in the undisturbed periods and diurnal radiative processes for nocturnal rainfall. Cloud resolving models (CRMS) have been used to determine the mechanisms associated with diurnal variation of precipitating processes. CRMs allow explicit cloud-radiation and air-sea interactive processes. However, CRMs can be only used for idealized simulations (i.e., no feedback between clouds and their embedded large-scale environments; cyclic lateral boundary conditions and idealized initial conditions). In this study, the Penn State/NCAR Mesoscale Model (MM5) with improved physics (i.e., cloud microphysics, radiation, land-soil-vegetation-surface processes, and TOGA COARE flux scheme) and a multiple level nesting technique (covers the TOGA COARE LSA/IFA with a 54 km grid and can nest down to 18, 6 and possibly even 2 km) will be adopted for studying the diurnal variations of rainfall. We will examine precipitation processes over open ocean and over land. We will also perform sensitivity tests to determine how the radiative forcing and diurnal SST cycle affects the development of convection.

Tao, W.-K.↗

Level-set Modeling Simulations of Chemical Vapor Infiltration for Ceramic Matrix Composites Manufacturing

Silicon-carbide (SiC) reinforced ceramic matrix composites (CMCs) are a key enabling technology to reduce fuel consumption and emissions of gas turbine engines. In one manufacturing approach, chemical vapor infiltration (CVI) is limited to only coating SiC fibers. The preform is then fabricated using a lay-up of basic plys or 2-D woven sheets composed of the precoated fibers. At the other extreme, CVI is used to completely densify a 3-D woven preform shaped almost like the gas turbine component itself. The latter approach is more suitable for highly engineered components which sit directly in the gas path of the engine, for example, a high pressure turbine blade. In this case, the geometry is necessarily complex for aerodynamic, stress, and lifing (multi-physics) requirements. Presently, optimizing the CVI-dominated manufacturing approach is largely by trial-and-error. In this work, a first-principles modeling of CVI is performed to realize optimization of SiC/SiC CMC manufacturing. The modeling is based on a level-set framework to describe the interface between the vapor and solid phases. A finite-difference numerical scheme using an immersed boundary method is developed for fixed, structured meshes. Massively parallel direct numerical simulations (DNS) of CVI through fiber-woven geometries are performed using one-step chemistry, and over a range of Thiele moduli. Illustrative applications of the resulting large DNS data sets are given, including the development of fiber-weave specific infiltration models and structure functions for mean-field (porous media) Computational Fluid Dynamics (CFD) simulations of CVI.

36 MATERIALS SCIENCE↗

Use of Combined A-Train Observations to Validate GEOS Model Simulated Dust Distributions During NAMMA

During August 2006, the NASA African Multidisciplinary Analyses Mission (NAMMA) field experiment was conducted to characterize the structure of African Easterly Waves and their evolution into tropical storms. Mineral dust aerosols affect tropical storm development, although their exact role remains to be understood. To better understand the role of dust on tropical cyclogenesis, we have implemented a dust source, transport, and optical model in the NASA Goddard Earth Observing System (GEOS) atmospheric general circulation model and data assimilation system. Our dust source scheme is more physically based scheme than previous incarnations of the model, and we introduce improved dust optical and microphysical processes through inclusion of a detailed microphysical scheme. Here we use A-Train observations from MODIS, OMI, and CALIPSO with NAMMA DC-8 flight data to evaluate the simulated dust distributions and microphysical properties. Our goal is to synthesize the multi-spectral observations from the A-Train sensors to arrive at a consistent set of optical properties for the dust aerosols suitable for direct forcing calculations.

Nowottnick, E.↗

Impacts of Aerosol Direct Effects on the South Asian Climate: Assessment of Radiative Feedback Processes Using Model Simulations and Satellite/Surface Measurements

Current assessment of aerosol radiative effect is hindered by our incomplete knowledge of aerosol optical properties, especially absorption, and our current inability to quantify physical and microphysical processes. In this research, we investigate direct aerosol radiative effect over heavy aerosol loading areas (e.g., Indo-Gangetic Plains, South/East Asia) and its feedbacks on the South Asian climate during the pre-monsoon season (March-June) using the Purdue Regional Climate Model (PRCM) with prescribed aerosol data derived by the NASA Goddard Earth Observing System Model (GEOS-5). Our modeling domain covers South and East Asia (60-140E and 0-50N) with spatial resolutions of 45 km in horizontal and 28 layers in vertical. The model is integrated from 15 February to 30 June 2008 continuously without nudging (i.e., only forced by initial/boundary conditions). Two numerical experiments are conducted with and without the aerosol-radiation effects. Both simulations are successful in reproducing the synoptic patterns on seasonal-to-interannual time scales and capturing a pre-monsoon feature of the northward rainfall propagation over Indian region in early June which shown in Tropical Rainfall Measuring Mission (TRMM) observation. Preliminary result suggests aerosol-radiation interactions mainly alter surface-atmosphere energetics and further result in an adjustment of the vertical temperature distribution in lower atmosphere (below 700 hPa). The modifications of temperature and associated rainfall and circulation feedbacks on the regional climate will be discussed in the presentation.

Wang, Sheng-Hsiang↗

Spatial distribution of melt-season cloud radiative effects over Greenland: Evaluating satellite observations, reanalyses, and model simulations against in situ measurements

Arctic clouds can profoundly influence surface radiation and thus surface melt. Over Greenland, these cloud radiative effects (CRE) vary greatly with the diverse topography. To investigate the ability of assorted platforms to reproduce heterogeneous CRE, we evaluate CRE spatial distributions from a satellite product, reanalyses, and a global climate model against estimates from 21 automatic weather stations (AWS). Net CRE estimated from AWS generally decreases with elevation, forming a “warm center” distribution. CRE areal averages from the five large–scale data sets we analyze are all around 10 W/m 2 . Modern–Era Retrospective Analysis for Research and Applications version 2 (MERRA–2), ERA–Interim, and Clouds and the Earth's Radiant Energy System (CERES) CRE estimates agree with AWS and reproduce the warm center distribution. However, the National Center for Atmospheric Research Arctic System Reanalysis (ASR) and the Community Earth System Model Large ENSemble Community Project (LENS) show strong warming in the south and northwest, forming a warm L–shape distribution. Discrepancies are mainly caused by longwave CRE in the accumulation zone. MERRA–2, ERA–Interim, and CERES successfully reproduce cloud fraction and its dominant positive influence on longwave CRE in this region. On the other hand, longwave CRE from ASR and LENS correlates strongly with ice water path instead of with cloud fraction or liquid water path. Moreover, ASR overestimates cloud fraction and LENS underestimates liquid water path substantially, both with limited spatial variability. MERRA–2 best captures the observed interstation changes, captures most of the observed cloud–radiation physics, and largely reproduces both albedo and cloud properties. Furthermore, the warm center CRE spatial distribution indicates that clouds enhance surface melt in the higher accumulation zone and reduce surface melt in the lower ablation zone.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗