SEARCH · Search NASA

Results for “Small scale processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

All sources NASA NTRS DOE OSTI

NASA NTRS2020

The Prevalence of Precipitation from Polar Supercooled Clouds

Supercooled clouds substantially impact polar surface energy budgets but large-scale models often underestimate their occurrence, which motivates accurately establishing metrics of basic processes. An analysis of long-term measurements at Utqiaġvik, Alaska, and McMurdo Station, Antarctica, combines lidar-validated use of soundings to identify supercooled cloud layers and colocated ground-based profiling radar measurements to quantify cloud base precipitation. We find that more than 85 % (75 %) of sampled supercooled layers are precipitating over the Arctic (Antarctic) site, with more than 75 % (50 %) precipitating continuously to the surface. Such high frequencies can be reconciled with substantially lesser spaceborne estimates by considering differences in radar hydrometeor detection sensitivity. While ice precipitation into supercooled clouds from aloft is common, we also find that the great majority of supercooled cloud layers without ice falling into them are themselves continuously generating precipitation. Such sustained primary ice formation is consistent with continuous activation of immersion-mode ice nucleating particles (INPs), suggesting that supercooled cloud formation is a principal gateway to ice formation at temperatures greater than ~ −38 °C over polar regions. The prevalence of weak precipitation fluxes is also consistent with supercooled cloud longevity, and with well-observed and widely simulated case studies. An analysis of colocated microwave radiometer retrievals suggests that weak precipitation fluxes can be nonetheless consequential to moisture budgets for supercooled clouds owing to small liquid water paths. Finally, we suggest that these ground-based precipitation rate statistics offer valuable guidance for improving the representation of polar cloud processes in large-scale models.

Polar clouds↗

NASA NTRS1990

Advanced embedded processing: Present and future

Integrated airframe/propulsion control system architecture is discussed. The main objectives of the program are: design and validation methodology for system architecture; system design; system specification; and small-scale system testing.

Cohen, Gerald C.↗

DOE OSTI2023

Coal-based Bricks & Blocks (CBBs): Process Development to Prototype Fabrication Coupled with Techno-Economic Analysis and Market Survey

Coal-based bricks and blocks (CBBs) were formulated using anthracite and thermoplastic binder. Lab scale test composites were formed by hot-press molding and commercial extrusion for test articles and for a full-scale prototype. Formulations and test matrices followed a systematic experimental design to examine the effects of and interactions among three primary independent variables: a) thermoplastic type, b) weight fractions of binder relative to the total anthracite weight, and c) relative proportions of large versus small (milled) anthracite size fractions. Technical performance metrics include compressive strength, modulus, porosity/permeability and density. These DoE studies establish composition-property relations and identify the best combination for any desired property of interest – in particular, strength. Based on CBB composition and fabrication process, validated against technical performance metrics, a techno-economic analysis was constructed which incorporated a process flow model, engineering design (with scaling), and calculated capital plus operating costs. Based on measured property metrics and estimated process economics and a projected price by TEA (techno-economic analysis), building and construction target markets were identified by a market survey assessment. With known cost, price, performance metrics and competitive advantages for CBBs matched with commercial applications/uses, a technical gap analysis was performed to identify further development required for scale-up and commercialization.

01 COAL, LIGNITE, AND PEAT↗

DOE OSTI2019

A scalable Euler–Lagrange approach for multiphase flow simulation on spectral elements

Multiphase flow can be difficult to simulate with high accuracy due to the wide range of scales associated with various multiphase phenomena. These scales may range from the size of individual particles to the entire domain of interest. Traditionally, large scale systems can only be simulated using averaging approaches that filter out the locations of individual particles. In this work, the Euler–Lagrange method is used to simulate large-scale dense particle systems in which each individual particle is tracked. In order to accomplish this, the highly scalable spectral element code nek5000 has been extended to handle the multiple levels of multiphase coupling in these systems. These levels include what has been called one-, two-, and four-way coupling. Here, each level has been separated to detail the computational impact of each stage. A binned ghost particle algorithm has also been developed to efficiently handle the challenges of two- and four-way coupling in a parallel processing context. The algorithms and their implementations are then shown to scale to 65,536 Message Passing Interface (MPI) ranks in both the strong and weak limits. After this, validation is performed through simulation of a small-scale fluidized bed. Lastly, a large-scale fluidized bed is simulated with 65,536 MPI ranks and is able to capture the unique physics of the onset of fluidization.

Computer Science↗

DOE OSTI2024

Framework of compressive sensing and data compression for 4D-STEM

Four-dimensional Scanning Transmission Electron Microscopy (4D-STEM) is a powerful technique for high-resolution and high-precision materials characterization at multiple length scales, including the characterization of beam-sensitive materials. However, the field of view of 4D-STEM is relatively small, which in absence of live processing is limited by the data size required for storage. Furthermore, the rectilinear scan approach currently employed in 4D-STEM places a resolution- and signal-dependent dose limit for the study of beam sensitive materials. Improving 4D-STEM data and dose efficiency, by keeping the data size manageable while limiting the amount of electron dose, is thus critical for broader applications. Here we introduce a general method for reconstructing 4D-STEM data with subsampling in both real and reciprocal spaces at high fidelity. The approach is first tested on the subsampled datasets created from a full 4D-STEM dataset, and then demonstrated experimentally using random scan in real-space. The same reconstruction algorithm can also be used for compression of 4D-STEM datasets, leading to a large reduction (100 times or more) in data size, while retaining the fine features of 4D-STEM imaging, for crystalline samples.

4D-STEM↗

DOE OSTI2019

A Fokker–Planck approach to a moment closure for mixing in variable-density turbulence

We develop a theory for the cascade mixing terms in a moment closure approach to binary active scalar mixing in variable-density turbulence. To address the variable-density complications we apply, as a principle and constraint, the conservation of the probability density function (PDF) through a Fokker–Planck equation with bounded sample space whose attractor is the beta PDF with skewness. Mixing is related to a single-point PDF as a realisability principle to provide mathematically rigorous expressions for the small scale statistics in terms of largescale moments. The problem of the unknown small-scale mixing is replaced with the determination of the drift and diffusion terms of a Fokker–Planck equation in a beta-PDF-convergent stochastic process. We find that realisability of a beta-convergent process requires the mixing time-scale ratio, taken as a constant in passive scalar mixing, to be a function of the mean mass fraction, mean fluid density, the Atwood number, the density-volume correlation and moments of the density field. We develop and compare the new model with direct numerical simulations data of non-stationary homogeneous variable-density turbulence.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2023

Convergence of halo statistics: code comparison between rockstar and compaso using scale-free simulations

ABSTRACT In this study, we perform a halo-finder code comparison between rockstar and compaso. Based on our previous analysis aiming at quantifying resolution of N-body simulations by exploiting large (up to N = 40963) simulations of scale-free cosmologies run using abacus, we focus on convergence of the halo mass function, two-point correlation function, and mean radial pairwise velocities of halo centres selected with the aforementioned two algorithms. We establish convergence, for both rockstar and compaso, of mass functions at the 1 per cent precision level and of the mean pairwise velocities (and also two-point correlation function) at the 2 per cent level. At small scales and masses, we find that rockstar exhibits greater self-similarity. We also highlight the role played by the merger-tree post-processing of compaso haloes on their convergence. Finally, we give resolution limits expressed as a minimum particle number per halo in a form that can be directly extrapolated to Lambda cold dark matter.

Astronomy & Astrophysics↗

DOE OSTI2025

Two transitions in complex eigenvalue statistics: Hermiticity and integrability breaking

Open quantum systems have complex energy eigenvalues which are expected to follow non-Hermitian random matrix statistics, when chaotic, or two-dimensional (2d) Poisson statistics, when integrable. We investigate the spectral properties of a many-body quantum spin chain, i.e., the Hermitian Heisenberg model with imaginary disorder. Its rich complex eigenvalue statistics is found to separately break both Hermiticity and integrability at different scales of the disorder strength. With no disorder, the system is integrable and Hermitian, with spectral statistics corresponding to the 1d Poisson point process. At very small disorder, we find a transition from 1d Poisson statistics to an effective D -dimensional Poisson point process, showing Hermiticity breaking. At intermediate disorder, we find integrability breaking, as inferred from the statistics matching that of non-Hermitian complex symmetric random matrices in class AI † . For large disorder, as the spins align, we recover the expected integrability (now in the non-Hermitian setup), indicated by 2d Poisson statistics. These conclusions are based on fitting the spin-chain data of numerically generated nearest- and next-to-nearest-neighbor spacing distributions to an effective 2d Coulomb gas description at inverse temperature β . We confirm that such an effective description of random matrices also applies in classes AI † and AII † up to next-to-nearest-neighbor spacings. Published by the American Physical Society 2025

Akemann, Gernot (ORCID:0000000217104258)↗

NASA NTRS1980

Rheography in weightlessness

Small-scale rheographic devices for use on a space ship were developed and used during flights for the study of blood flow in vascular regions. The processes that occur during space flight and the adaptation of the human body to weightlessness are understood. The future condition of the cosmonauts' health is predicted.

Kasyan, I.↗

NASA NTRS1984

Objective assessment of Advanced Very High Resolution Radiometer data for land cover mapping

The validity of using data from the Advanced Very High Resolution Radiometer (AVHRR) of the satellites NOAA-6 and NOAA-7 for land cover mapping is assessed by making comparisons with much higher resolution LANDSAT multi-spectral scanner (MSS) data. Near synchronous data for both systems are analysed for test sites in the Imperial Valley, California, the Nile Delta, and southern Italy. The results strongly indicate that despite the very coarse resolution of the AVHRR data compared with conventional MSS data they are sufficiently strongly correlated to suggest that the former have significant potential for land cover mapping, especially at small scales and for large areas. Hence the outstanding benefits of AVHRR data, namely their high temporal frequency, relative cheapness and low data volumes for image processing, may readily be taken advantage of for such tasks.

Townshend, J. R. G.↗

NASA NTRS1989

Creation of current filaments in the solar corona

It has been suggested that the solar corona is heated by the dissipation of electric currents. The low value of the resistivity requires the magnetic field to have structure at very small length scales if this mechanism is to work. In this paper it is demonstrated that the coronal magnetic field acquires small-scale structure through the braiding produced by smooth, randomly phased, photospheric flows. The current density develops a filamentary structure and grows exponentially in time. Nonlinear processes in the ideal magnetohydrodynamic equations produce a cascade effect, in which the structure introduced by the flow at large length scales is transferred to smaller scales. If this process continues down to the resistive dissipation length scale, it would provide an effective mechanism for coronal heating.

Mikic, Z.↗

NASA NTRS1997

[Petrological Analysis of Astrophysical Dust Analog Evolution]

This project "Petrological analysis of astrophysical dust analog evolution" was initiated to try to understand the vapor phase condensation, and the nature of the reaction products, in circumstellar environments, such as the solar nebula 4,500 Myrs ago, and in the interstellar medium. Telescope-based infrared [IR] spectroscopy offers a broad-scale inventory of the various types of dust in these environments but no details on small-scale variations in terms of chemistry and morphology and petrological phase relationships. Vapor phase condensation in these environments is almost certainly a non-equilibrium process. The main challenge to this research was to document the nature of this process that, based on astrophysical observations, seems to yield compositionally consistent materials. This observation may suggest a predictable character during non-equilibrium condensation. These astrophysical environments include two chemically distinct, that is, oxygen-rich and carbon-rich environments. The former is characterized by silicates the latter by carbon-bearing solids. According to cosmological models of stellar evolution circumstellar dust accreted into protoplanets wherein thermal and/or aqueous processes will alter the dust under initially, non-equilibrium conditions.

Rietmeijer, Frans J. M.↗

DOE OSTI2020

Turning a liability into an asset: creating liquid transportation fuels from CO2, natural gas, or RNG

GTI will be discussing our Cool GTL process, a new low cost versatile integrated modular process which can convert CO2, methane, ethane, and biogas, to gasoline jet and diesel with no wax intermediate product. We have tested Cool GTL at small scale and are beginning tests at larger 2 gallon/day scale for biogas conversion ( with DOE funding). Our ultimate goal is to have several commercial deployments of Cool GTL in a variety of applications running in 5 years. Most exciting is the fact that Cool GTL can totally eliminate Global Warming and produce all the worlds transportation fuel by conversion of the excess CO2 currently in the air to liquid transportation fuels, leading to a modern revolution in the way transportation fuels are produced.

09 BIOMASS FUELS↗

DOE OSTI2025

The Importance of an Ensemble Approach for Modeling Aerosol‐Convection Interactions

Aerosol-convection interactions modulate cloud microphysics, thermodynamics, and updraft intensity, contributing to climate-scale aerosol-radiative forcing. However, quantifying aerosol indirect effects in mixed-phase deep convection remains challenging due to uncertainties in parameterized physics and initial conditions driving nonlinear evolution of convective processes. This study investigates the convective updraft sensitivity to random initial temperature perturbations using an idealized ensemble modeling framework informed by in situ thermodynamic and aerosol observations from the DOE TRACER field campaign. We analyze the impact of small-scale initial perturbations on updraft velocity and supersaturation, and determine the ensemble size required to minimize stochastic internal variability. Results show that minor thermodynamic perturbations can produce updraft variability comparable to aerosol-induced changes reported in prior work. An ensemble of 10 members sufficiently reduces variability, enabling robust investigation of aerosol-related updraft invigoration and informing the design of future ensemble-based aerosol-convection interaction studies in environments with significant spatiotemporal mesoscale thermodynamic and aerosol heterogeneity.

aerosol-convection interactions↗

NASA NTRS2017

Scale Dependence of Multiplier Distributions for Particle Concentration, Enstrophy, and Dissipation in the Inertial Range of Homogeneous Turbulence

Turbulent flows preferentially concentrate inertial particles depending on their stopping time or Stokes number, which can lead to significant spatial variations in the particle concentration. Cascade models are one way to describe this process in statistical terms. Here, we use a direct numerical simulation (DNS) dataset of homogeneous, isotropic turbulence to determine probability distribution functions (PDFs) for cascade multipliers, which determine the ratio by which a property is partitioned into subvolumes as an eddy is envisioned to decay into smaller eddies. We present a technique for correcting effects of small particle numbers in the statistics. We determine multiplier PDFs for particle number, flow dissipation, and enstrophy, all of which are shown to be scale dependent. However, the particle multiplier PDFs collapse when scaled with an appropriately defined local Stokes number. As anticipated from earlier works, dissipation and enstrophy multiplier PDFs reach an asymptote for sufficiently small spatial scales. From the DNS measurements, we derive a cascade model that is used it to make predictions for the radial distribution function (RDF) for arbitrarily high Reynolds numbers, Re, finding good agreement with the asymptotic, infinite Re inertial range theory of Zaichik and Alipchenkov [New J. Phys. 11, 103018 (2009)]. We discuss implications of these results for the statistical modeling of the turbulent clustering process in the inertial range for high Reynolds numbers inaccessible to numerical simulations.

turbulent flows↗

NASA NTRS2010

Timing of Formal Phase Safety Reviews for Large-Scale Integrated Hazard Analysis

Integrated hazard analysis (IHA) is a process used to identify and control unacceptable risk. As such, it does not occur in a vacuum. IHA approaches must be tailored to fit the system being analyzed. Physical, resource, organizational and temporal constraints on large-scale integrated systems impose additional direct or derived requirements on the IHA. The timing and interaction between engineering and safety organizations can provide either benefits or hindrances to the overall end product. The traditional approach for formal phase safety review timing and content, which generally works well for small- to moderate-scale systems, does not work well for very large-scale integrated systems. This paper proposes a modified approach to timing and content of formal phase safety reviews for IHA. Details of the tailoring process for IHA will describe how to avoid temporary disconnects in major milestone reviews and how to maintain a cohesive end-to-end integration story particularly for systems where the integrator inherently has little to no insight into lower level systems. The proposal has the advantage of allowing the hazard analysis development process to occur as technical data normally matures.

Massie, Michael J.↗

NASA NTRS2019

Automated Fiber Placement of Composite Wind Tunnel Blades: Process Planning and Manufacturing

The ability to accurately manufacture large complex shapes in a consistent and repeatable manner has led to Automated Fiber Placement (AFP) being the predominant mode of manufacturing for large composite aerospace structures today. Currently, AFP is being considered for medium- and small-scale parts. Composite wind tunnel blades have traditionally been fabricated by hand layup for pre-impregnated or dry fabrics with resin infusion. Though well proven, the traditional fabrication method is laborious and tedious, and hence expensive. The project described in this paper used the Integral Structural Assembly of Advanced Composites (ISAAC) facility at the NASA Langley Research Center to build a manufacturing demonstration unit (MDU) with a shape representative of a wind tunnel blade. This MDU is used to discuss tooling, process planning, and fabrication. Additionally, details of the generic manufacturing workflow are presented.

Harik, Ramy↗

DOE OSTI2019

What Drives Upper-Ocean Temperature Variability in Coupled Climate Models and Observations?

Abstract A key question in climate modeling is to what extent sea surface temperature and upper-ocean heat content are driven passively by air–sea heat fluxes, as opposed to forcing by ocean dynamics. This paper investigates the question using a climate model at different resolutions, and observations, for monthly variability. At the grid scale in a high-resolution climate model with resolved mesoscale ocean eddies, ocean dynamics (i.e., ocean heat flux convergence) dominates upper 50 m heat content variability over most of the globe. For deeper depths of integration to 400 m, the heat content variability at the grid scale is almost totally controlled by ocean heat flux convergence. However, a strong dependence on spatial scale is found—for the upper 50 m of ocean, after smoothing the data to around 7°, air–sea heat fluxes, augmented by Ekman heat transports, dominate. For deeper depths of integration to 400 m, the transition scale becomes larger and is above 10° in western boundary currents. Comparison of climate model results with observations show that the small-scale influence of ocean intrinsic variability is well captured by the high-resolution model but is missing from a comparable model with parameterized ocean-eddy effects. In the deep tropics, ocean dynamics dominates in all cases and all scales. In the subtropical gyres at large scales, air–sea heat fluxes play the biggest role. In the midlatitudes, at large scales >10°, atmosphere-driven air–sea heat fluxes and Ekman heat transport variability are the dominant processes except in the western boundary currents for the 400 m heat content.

54 ENVIRONMENTAL SCIENCES↗