Search NASA⌕ Search

SEARCH · Search NASA

Results for “Solar Plus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Equatorial Enhancement of the Nighttime OH Mesospheric Infrared Airglow

Global measurements of the hydroxyl mesospheric airglow over an extended period of time have been made possible by the NASA SABER infrared sensor aboard the TIMED satellite which has been functioning since December of 2001. The orbital mission has continued over a significant portion of a solar cycle. Experimental data from SABER for several years have exhibited equatorial enhancements of the nighttime mesospheric OH (delta v = 2) airglow layer consistent with the high average diurnal solar flux. The brightening of the OH airglow typically means more H + O3 is being reacted. At both the spring and autumn seasonal equinoxes when the equatorial solar UV irradiance mean is greatest, the peak volume emission rate (VER) of the nighttime Meinel infrared airglow typically appears to be both significantly brighter plus lower in altitude by several kilometres at low latitudes compared with midlatitude findings.

Baker, D. J.↗

Improving Solar PV Degradation Prediction Certainty: PREDICTS2 (Final Technical Report)

The rate and type of in-service PV performance degradation vary for different module designs, vintages, and operating climates. The current IEC 61215 module qualification testing standard can be used to identify design and manufacturing flaws that may lead to early life failures, but it was not intended to accurately predict degradation rates in the first 5 to 10 years of a PV plant’s lifetime, nor long-term performance, under varied operating conditions. Correlations between accelerated aging data and real-world degradation data are needed to better predict wear-out degradation in response to environmental stressors, such as elevated temperature, temperature cycling, moisture, wind load, and solar radiation. The PREDICTS2 project aged 36 pristine-condition ‘spare’ modules from a commercial PV power plant in the U.S. Southwest using the IEC 61215 and Qualification Plus (Qual Plus) testing standards. The study is unique in its ability to compare performance degradation data for fielded modules operating outdoors for 6 years in a commercial plant environmental with degradation data for modules of the same make, model and vintage that have been aged artificially in an indoor laboratory. Changes in individual module current-voltage (I-V) curve data were measured before and after the artificial aging process and compared to I-V curve data for the fielded modules. This project advanced the industry’s understanding of how environmental stressors affect performance degradation and established relationships between degradation mechanisms and changes to module electrical parameters and power loss. Improved certainty in degradation rates is expected to be the greatest source of LCOE reduction resulting from this project. Reducing the spread in the degradation rate probability distribution lowers project risk, which translates to lower project financing costs.

14 SOLAR ENERGY↗

Synthesis of a novel building block for the preparation of multi-chromophoric sensitizers for panchromatic dye-sensitized solar cells

For this study, a simple 3-step synthesis of a novel pyrazine-containing heteroaromatic building block for use as a scaffold for producing multi-chromophoric sensitizers for use in dye sensitized solar cells has been developed. This moiety features two esterified carboxylic acid groups whose hydrolysis provides moieties for anchoring to nanoparticulate metal oxides and two bromine atoms that facilitate attachment of chromophores via palladium mediated cross-coupling methods. The utility of the building block for the synthesis of complex dye motifs is demonstrated by the preparation of a novel panchromatic dye featuring a BODIPY chromophore and a strongly electron donating porphyrin chromophore using both Suzuki and copper-free Sonogashira cross-coupling methods. The building block could be used either to attach two different or identical dye moieties to the metal oxide, or to attach an electron injection dye plus an auxiliary absorber, photoprotective agent, secondary redox moiety, etc.

14 SOLAR ENERGY↗

NEW SOLAR COMPOSITION: THE PROBLEM WITH SOLAR MODELS REVISITED

We construct updated solar models with different sets of solar abundances, including the most recent determinations by Asplund et al. The latter work predicts a larger (approx10%) solar metallicity compared to previous measurements by the same authors but significantly lower (approx25%) than the recommended value from a decade ago by Grevesse and Sauval. We compare the results of our models with determinations of the solar structure inferred through helioseismology measurements. The model that uses the most recent solar abundance determinations predicts the base of the solar convective envelope to be located at R {sub CZ} = 0.724 R{sub sun} and a surface helium mass fraction of Y{sub surf} = 0.231. These results are in conflict with helioseismology data (R{sub CZ} = 0.713 +- 0.001 R{sub sun} and Y{sub surf} = 0.2485 +- 0.0035) at 5sigma and 11sigma levels, respectively. Using the new solar abundances, we calculate the magnitude by which radiative opacities should be modified in order to restore agreement with helioseismology. We find that a maximum change of approx15% at the base of the convective zone is required with a smooth decrease toward the core, where the change needed is approx5%. The required change at the base of the convective envelope is about half the value estimated previously. We also present the solar neutrino fluxes predicted by the new models. The most important changes brought about by the new solar abundances are the increase by approx10% in the predicted {sup 13}N and {sup 15}O fluxes that arise mostly due to the increase in the C and N abundances in the newly determined solar composition.

79 ASTRONOMY AND ASTROPHYSICS↗

Non-Thermal Solar Wind Electron Velocity Distribution Function

The quiet-time solar wind electrons feature non-thermal characteristics when viewed from the perspective of their velocity distribution functions. They typically have an appearance of being composed of a denser thermal “core” population plus a tenuous energetic “halo” population. At first, such a feature was empirically fitted with the kappa velocity space distribution function, but ever since the ground-breaking work by Tsallis, the space physics community has embraced the potential implication of the kappa distribution as reflecting the non-extensive nature of the space plasma. From the viewpoint of microscopic plasma theory, the formation of the non-thermal electron velocity distribution function can be interpreted in terms of the plasma being in a state of turbulent quasi-equilibrium. Such a finding brings forth the possible existence of a profound inter-relationship between the non-extensive statistical state and the turbulent quasi-equilibrium state. The present paper further develops the idea of solar wind electrons being in the turbulent equilibrium, but, unlike the previous model, which involves the electrostatic turbulence near the plasma oscillation frequency (i.e., Langmuir turbulence), the present paper considers the impact of transverse electromagnetic turbulence, particularly, the turbulence in the whistler-mode frequency range. It is found that the coupling of spontaneously emitted thermal fluctuations and the background turbulence leads to the formation of a non-thermal electron velocity distribution function of the type observed in the solar wind during quiet times. This demonstrates that the whistler-range turbulence represents an alternative mechanism for producing the kappa-like non-thermal distribution, especially close to the Sun and in the near-Earth space environment.

79 ASTRONOMY AND ASTROPHYSICS↗

Berkeley Lab WINDOW

WINDOW features include: - Microsoft Windows TM interface - algorithms for the calculation of total fenestration product U-values and Solar Heat Gain Coefficient consistent with ASHRAE SPC 142, ISO 15099, and the National Fenestration Rating Council - a Condensation Resistance Index in accordance with the NFRC 500 Standard - and integrated database of properties - imports data from other LBNL window analysis software: - Import THERM file into the Frame Library - Import records from IGDB and OPtics5 into the Glass Library for the optical properties of coated and uncoated glazings, laminates, and applied films. Program Capabilities WINDOW 7.2 offers the following features: The ability to analyze products made from any combination of glazing layers, gas layers, frames, spacers, and dividers under any environmental conditions and at any tilt; The ability to model complex glazing systems such as venetian blinds and roller shades. Directly accessible libraries of window system components, (glazing systems, glazing layers, gas fills, frame and divider elements), and environmental conditions; The choice of working in English (IP), or Systeme International (SI) units; The ability to specify the dimensions and thermal properties of each frame element (header, sills, jamb, mullion) in a window; A multi-band (wavelength-by-wavelength) spectral model; A Glass Library which can access spectral data files for many common glazing materials from the Optics5database; A night-sky radiative model; A link with the DOE-2.1E and Energy Plus building energy analysis program. Performance Indices and Other Results For a user-defined fenestration system and user-defined environmental conditions, WINDOW calculates: The U-value, solar heat gain coefficient, shading coefficient, and visible transmittance for the complete window system; The U-value, solar heat gain coefficient, shading coefficient, and visible transmittance for the glazing system (center-of-glass values); The U-values of the frame and divider elements and corresponding edge-of-glass areas (based on generic correlations); The total solar and visible transmittance and reflectances of the glazing system. Color properties, i.e. L*, a*, and b* color coordinates, dominant wavelength, and purity for transmitted and reflected (outdoor) solar radiation; The damage-weighted transmittance of the glazing system between 0.3 an 0.38 microns; The angular dependence of the solar and visible transmittances, solar and visible reflectances, solar absorptance, and solar heat gain coefficient of the glazing system; The percent relative humidity of the inside and outside air for which condensation will occur on the interior and exterior glazing surfaces respectively; The center-of-glass temperature distribution.

Curcija, DraganCharlie↗

Solar flare and galactic cosmic ray studies of Apollo 14 and 15 samples.

Thermoluminescence (TL) measurements in rock 14310 show a strong depth dependence consistent with that expected from solar flares. This effect should prove useful in studying solar flare fluctuations in the time interval of 100 to 100,000 years. Rare gas spallation ages for rock 14301, 14306, and 14311 are respectively 102 plus or minus 30, 25 plus or minus 2, and 661 plus or minus 72 m.y. The 14306 value supports the idea that Cone Crater was formed 25 million years ago. Groupings of exposure ages suggest the dates of other major cratering events. Galactic track data in 14310 show little depth dependence.

Crozaz, G.↗

Anisotropies of galactic cosmic rays outside the orbit of earth measured on Pioneer 10

Preliminary results of observations of the directional distribution of cosmic rays being conducted by the University of Chicago experiment on the Pioneer 10 spacecraft are presented. The unusual geometry of the directional scan is described and some features of the response of a bidirectional coincidence telescope are discussed. Selected periods free from the presence of low-energy solar particles exhibit transient deviations from uniform directional distributions for the bidirectional flux of nuclei greater than 67 MeV/nucleon. These deviations are typically 2 to 4 (plus or minus 1) percent and are oriented very roughly in a N-S direction. Such nonuniformities observed with a bidirectional detector can only be due to even order terms in the angular distribution function.

Lentz, G. A.↗

The 1979-1980 eclipse of Zeta Aurigae. II - The emission spectrum

UV observations using the IUE are employed to discuss the strength and changes of Zeta Aur between a second contact and mid-eclipse in 1979, the relative visibility of the supergiant's chromosphere as compared with the circumstellar (CS) nebular scattering of the B star photons, and the origin of the high speed CS components observed at all orbital phases. Agreement has been found for a spectoscopic radius of 200 solar radii and a 400 pc distance, and eclipse emission lines were recorded from 1238.9-2802.7 microns. An asymmetry in the Fe III lines at 46 plus or minus 15 km/sec was seen during eclipse and is taken to indicate downflowing material. The high speed wind flowing from the K supergiant is thought to expand homogeneously until encountering the B type main sequence star, where an accretion bow shock forms, and the smaller star's passage near the K star at periastron may cause local surface heating and subsequent high speed flows.

Stencel, R. E.↗

Epsilon carbide - A low-temperature component of interplanetary dust particles

Transmission electron microscope study of a chondritic interplanetary dust particle has revealed the presence of epsilon iron-nickel carbide, a low-temperature carbide previously encountered only in metallurgical studies. In these studies epsilon-carbide was synthesized by carburization of iron or nickel grains in a stream of carbon monoxide or carbon monoxide plus hydrogen. Similar carburization of an iron-nickel metal in situ may have produced epsilon-carbide during particle heating on atmospheric entry or in solar orbit. Alternatively, the epsilon-carbide may be a by-product of Fischer-Tropsch reactions in the solar nebula. Such reactions have been proposed as the mechanism of hydrocarbon formation in the early solar system.

Christoffersen, R.↗

The abundance of interstellar oxygen toward Orion: Evidence for recent infall?

We present high S/N (greater than 800) Goddard High-Resolution Spectrograph (GHRS) observations of the weak interstellar O I lambda 1356 absorption in the low-density sight lines toward iota Ori and kappa Ori. By comparing these data with observations toward more reddened stars, we find no evidence of density-dependent depletion from the gas phase for oxygen. The derived total oxygen abundance (gas plus grains) towards iota Ori and kappa Ori is consistent with stellar and nebular determinations in Orion at a level that is one-half the solar value. We speculate that the O/H abundance ratio is lower in Orion compared to the Sun because the local Milky Way has suffered a recent infall of metal-poor material, perhaps from the Magellanic Stream.

Meyer, David M.↗

IHY Operations: How the IHY is facilitated by the IHY Secretariat

In 1957 a program of international research, inspired by the International Polar Years of 1882 and 1932, was organized as the International Geophysical Year (IGY) to study global phenomena of the Earth and geospace. Fifty years later, the world s space science community will again come together for international programs of scientific collaboration: the International Heliophysical Year (MY), the Electronic Geophysical Year (eGY), and the International Polar Year (IPY) 2007. This time, research will extend out into the Heliosphere to focus on solar-terrestrial-plans for the IHY, eGY and IPY incorporate the activities of scientists in 191 nations, as well as the "IGY Gold" Historical Preservation initiative, plus a series of coordinated campaigns involving more than 100 instruments and models, education and public outreach programs, a developing nations instrument development program, and opportunities for supported research worldwide. The presentation will focus on the efforts and operations which will make these activities possible.

Thompson, Barbara J.↗

Geomagnetic Activity Indicates Large Amplitude for Sunspot Cycle 24

The level of geomagnetic activity near the time of solar activity minimum has been shown to be a reliable indicator for the amplitude of the following solar activity maximum. The geomagnetic activity index aa can be split into two components: one associated with solar flares, prominence eruptions, and coronal mass ejections which follows the solar activity cycle and a second component associated with recurrent high speed solar wind streams which is out of phase with the solar activity cycle. This second component often peaks before solar activity minimum and has been one of the most reliable indicators for the amplitude of the following maximum. The size of the recent maximum in this second component indicates that solar activity cycle 24 will be much higher than average - similar in size to cycles 21 and 22 with a peak smoothed sunspot number of 160 plus or minus 25.

Hathaway, David H.↗

DOE Zero Energy Ready Home Case Study, Weiss Building & Development, LLC., System Home, River Forest, Illinois

The Passive House Challenge Home located in River Forest, Illinois, is a 5-bedroom, 4.5-bath, 3,600 ft2 two-story home (plus basement) that costs about $237 less per month to operate than a similar sized home built to the 2009 IECC. For a home with no solar photovoltaic panels installed, it scored an amazingly low 27 on the Home Energy Rating System (HERS) score.An ENERGY STAR-rated dishwasher, clothes washer, and refrigerator; an induction cooktop, condensing clothes dryer, and LED lighting are among the energy-saving devices inside the home. All plumbing fixtures comply with EPA WaterSense criteria. The home was awarded a 2013 Housing Innovation Award in the "systems builder" category.

Building America↗

Mariner 6 and 7 ultraviolet spectrometer experiment - Implications of CO2/+/, CO, and O airglow.

The Mariner 6 and 7 UV spectrometer experiments observed intense emissions from CO, O, and CO2(+) in the Martian airglow. Analysis shows that they are excited predominantly by the absorption of solar EUV photons by CO2 and constitute a major energy-loss mechanism for the thermosphere. Models of the thermospheric temperature profile and the airglow layer that demonstrate the effects of neutral chemistry and ionospheric composition are developed. With their aid, the observed CO Cameron-band emission scale height of 19 (plus or minus 4.5) km is shown to suggest an exospheric temperature of 315 (plus or minus 75) K. Consideration of other data suggests a 'best' value of about 350 K. Within the uncertainties in the excitation efficiencies and in the thermospheric cooling mechanisms, the observations are consistent with the measured electron density. There is no indication in the data that the ionosphere is modified by the solar wind below 200 km.

Stewart, A. I.↗

Changes in Cloud and Aerosol Cover (1980-2006) from Reflectivity Time Series Using SeaWiFS, N7-TOMS, EP-TOMS, SBUV-2, and OMI Radiance Data

The amount of solar radiation reflected back to space or reaching the Earth's surface is primarily governed by the amount of cloud cover and, to a much lesser extent, by Rayleigh scatteri ng, aerosols, and various absorbing gases (e.g., O3, NO2, H2O). A useful measure of the effect of cloud plus aerosol cover is given by the amount that the 331 run Lambert Equivalent Reflectivity (LER) ofa scene exceeds the surfuce reflectivity for snow/ice-free scenes after Rayleigh scattering has been removed. Twenty-eight years of reflectivity data are available by overlapping data from several satellites: N7 (Nimbus 7, TOMS; 331 nm) from 1979 to 1992, SBUV-2 series (Solar Backscatter Ultraviolet, NOAA; 331 nm) 1985 to 2007, EP (Earth-Probe, TOMS; 331 nm) 1997 to 2006, SW (SeaWiFS; 412 nm) 1998 to 2006, and OMI (Ozone Measuring Instrument; 331 nm) 2004-2007. Only N7 and SW have a sufficiently long data record, Sun-synchronous orbits, and are adequately calibrated for long-term reflectivity trend estimation. Reflectivity data derived from these instruments and the SBUV-2 series are compared during the overlapping years. Key issues in determining long-term reflecti vity changes that have occurred during the N7 and SW operating periods are discussed. The largest reflectivity changes in the 412 nm SW LER and 331 nm EP LER are found to occur near the equator and are associated with a large EI Nino-Southern Oscillation event. Most other changes that have occurred are regional, such as the apparent cloud decrease over northern Europe since 1998. The fractional occurrence (fraction of days) of high reflectivity values over Hudson Bay, Canada (snow/ice and clouds) appears to have decreased when comparing reflectivity data from 1980 to 1992 to 1997-2006, suggesting shorter duration of ice in Hudson Bay since 1980.

Herman, J. R.↗

Recent Progress in Cathode Materials for Sodium-Metal Halide Batteries

Transitioning from fossil-fuels to renewable energy sources is a critical goal of greenhouse gas re-duction and climate control. Major improvements have made wind and solar power increasingly cost-competitive with fossil fuels. However, the inherent intermittency of renewable power sources such motivates pairing these resources with energy storage. Electrochemical energy storage in batteries is widely used in many fields and increasingly for grid-level storage, but current battery technologies still fall short of performance, safety, and cost. This review focuses on sodium metal halide (Na-MH) batteries, such as well-known Na-NiCl2 batteries, as a promising solution to safe and economical grid-level energy storage. Important features of conventional Na-MH batteries are discussed, and recent literature on the development of intermediate temperature, low-cost cathodes for Na-MH batteries is highlighted. By employing lower cost metal halides (e.g. FeCl2, ZnCl2, and CuCl2, etc.) in the cathode and operating at lower temperatures (e.g. 190 °C vs. 280 °C), new Na-MH batteries have the potential to offer comparable performance at much lower overall costs, providing an exciting alternative technology to enable widespread adoption of renewables plus storage for the grid.

Zhan, Xiaowen↗

Unraveling the Combined Photothermal Stability of Common Perovskite Solar Cell Compositions

In halide perovskite solar cells, certain compositions, especially those with a high mixture of anions, degrade rapidly. Here, in this study, a degradation study compares the photo (exposure to light), thermal (exposure to elevated temperatures), and photo-plus-thermal (combination) stability of three representative perovskite compositions chosen for their relatively high performance and to independently test anion versus cation effects. Based upon experience and reports, the compositions studied are triple cation with a high Br ratio (Cs 0.05 (FA 0.98 MA 0.02 ) 0.95 Pb(I 0.5 Br 0.5 ) 3 ), all iodide with a moderately high Cs ratio (FA 0.8 Cs 0.2 PbI 3 ), and FA-dominated triple cation (Cs 0.05 (FA 0.98 MA 0.02 ) 0.95 Pb(I 0.98 Br 0.02 ) 3 ). Cs 0.05 (FA 0.98 MA 0.02 ) 0.95 Pb(I 0.98 Br 0.02 ) 3 displayed the best combined photo-plus-thermal stability. Degradation mechanisms were investigated by comparing the morphology, surface composition, and bulk and interface carrier dynamics. Under the harshest aging conditions (photo-plus-thermal), phase segregation and vaporization of organic cations occurred, along with the appearance of high-energy states indicating the interaction with C 60 . The findings were verified on perovskite films blade-coated in air used in devices (FTO/NiOx/SAM/Perovskite/C 60 /BCP/Cu), achieving an efficiency of 21.9% alongside correlated stability.

14 SOLAR ENERGY↗