Search NASA⌕ Search

SEARCH · Search NASA

Results for “Staging Building”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Orbital-selective correlations and renormalized electronic structure in LiFeAs

Multiorbital physics is important to both the correlation physics and topological behavior of quantum materials. LiFeAs is a prototype iron pnictide suitable for in-depth investigation of this issue. Its electronic structure is strikingly different from the prediction of the noninteracting description. Here, a multiorbital Hubbard model is studied using a U(1) slave-spin theory. We demonstrate a mechanism for a substantial change to the Fermi surface, namely, orbital selectivity of the energy-level renormalization cooperating with its counterpart in quasiparticle spectral weight. Using this effect, we show how the dominating features of the electronic structure in LiFeAs are understood by the local correlations alone. In conclusion, our results set the stage to understand the origins and nature of both the unconventional superconductivity and likely electronic topology in this prototype iron pnictide and, more generally, reveal a remarkable degree of universality out of the seemingly complex multiorbital building blocks across a broad range of strongly correlated superconductors.

36 MATERIALS SCIENCE↗

Cooling and Heating Season Impacts of Right-Sizing of Fixed- and Variable-Capacity Heat Pumps With Attic and Indoor Ductwork

A new generation of full variable-capacity air-conditioning (A/C) and heat pump units has come on the market that promises to deliver very high cooling and heating efficiency. The units are controlled differently than standard single-capacity (fixed-capacity) systems. Instead of cycling on at full capacity and cycling off when the thermostat is satisfied, the new units can vary their capacity over a wide range (approximately 40%–118% of nominal full capacity) and stay on for 60%–100% more hours per day than the fixed-capacity systems depending on load-to-capacity ratios. Two-stage systems were not evaluated in this research effort.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Roundtable Discussions of the Solid State Lighting R&D Task Priorities - Nov. 2009

The Multi‐year Program Plan (MYPP) for the Solid‐State Lighting (SSL) Program forms a basis on which the Department of Energy (DOE) develops research and development (R&D) funding solicitations. This plan is updated annually. As part of the annual update process the DOE invited 27 experts in SSL to Washington, DC on November 3 rd to the 5 th of 2009 for the SSL roundtables. The purpose of these roundtables was to advise DOE on which R&D tasks are currently most needed in order to advance solid state lighting products. These meetings were conducted over three days. The first two days were dedicated to discussion on Light Emitting Diodes (LEDs) with the final day dedicated to Organic Light Emitting Diodes (OLEDs). The roundtables began with a brief introduction and summary of the goals of the meetings. This was followed by “soapbox” presentations, which allowed participants the forum to present topics for consideration they felt to be important. For additional information on these presentations see Appendix A. The task prioritization conversation followed. During this conversation, participants provided for each R&D task general comments either in support for prioritization for DOE funding in 2010 or reasons they felt it to be untimely. A total of 12 LED core tasks, 22 LED product development tasks, 9 OLED core tasks, and 19 OLED product development tasks were covered. From this master list an abridged list of suggested priority tasks was formed. After the prioritization discussion, participants discussed the current status and targets for various metrics assigned to each prioritized task. The final stage of the roundtable was to review SSL Program’s efficacy targets and milestones for LEDs and OLEDs.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Small-Scale Engineered High Flexibility Gasifier

This project advances a small-scale gasification unit as the first step in syngas-based hydrogen, chemicals, and synthetic fuels production. This unit is associated with an enhanced flexibility to different carbonaceous feedstocks including different types of coals, biomass, and plastics. The purpose of the project was to demonstrate feasibility and efficiency of coal pyrolysis in an auger reactor (pyrolyzer); supplemental methane and pyrolysis gas conversion into syngas in a proprietary non-catalytic converter; combined performance of pyrolyzer and non-catalytic converter to convert coal into syngas The proposed technology is based on an application of an intermediate speed pyrolysis at the temperature range 400-600°C as the first stage of biomass processing. At an industrial scale, an incorporation of coal pyrolysis into a feeding machine – auger-reactor allows to decrease its capital cost. At a pilot scale, it permits to employ electricity to build a compact device for testing of downstream equipment. The auger-reactor (pyrolyzer) generates pyrolysis gas and char practically from any carbonaceous feedstocks but their compositions and quantities are determined by their types. Pyrolysis gas is converted into syngas (mix of H 2 and CO) in a novel, proprietary hydrogen flame assisted non-catalytic converter which employs O 2 instead of air as an oxidizer. This reactor (converter) allows an easy adjustment to different pyrolysis gas compositions and tolerates a presence of sulfur and nitrogen contaminants. Our technology assumes carbonaceous feedstocks gasification with oxygen to allow the products H 2 , CO or CO 2 to be not diluted in N 2 and ready for the following synthesis of chemicals and fuels. Due to the same reason, it permits a more efficient CO 2 capture for its transport and storage. An implementation of our small-scale gasification process may overcome economic constrains by a flexible acceptance of coal, biomass, and plastics as well as their unsorted mixtures to make syngas for the following production of pure hydrogen, chemical and/or synthetic fuels.

42 ENGINEERING↗

Radiation-Hardened GaN HEMT and Cell Design, Modeling, and Fabrication for Nuclear Instrumentation Applications

Recent advances in nuclear power generation technologies show great promise for efficient, safe generation of carbon-free power in the near future. Consequently, many new generation reactor designs are being pursued by government and industry groups, including both fission- and fusion-based technologies. Radiation- and temperature-tolerant sensor technology continues to advance, yet development of the electronics/instrumentation technologies suitable for these environments have fallen behind. Industry has adequately addressed harsh environment electronics needs for low earth orbit satellites, but the much more extreme conditions associated with electronics placed near or in a reactor core remain unaddressed. This project investigates the use of gallium nitride (GaN) circuit technology to address the unique needs for sensor interface electronics and communications in reactor environments. This report provides a summary of the first year’s project activities related to developing and optimizing devices and circuits for this GaN high electronic mobility transistor (HEMT) process. Activities reported include multiple analog and digital circuit designs simulated using custom Verilog-A models generated from measured GaN devices fabricated in the target process. Digital circuit designs included fundamental logic circuits such as an inverter, NAND, NOR, AND and OR gates, as well as a 5-stage ring oscillator. Each design was simulated using an open-source SPICE simulator, and an integrated circuit layout was produced of each design for use in future fabrication. Analog circuit designs focused on the fundamental building blocks to be used to construct sensor interface and communications circuits. These included current mirrors, matched differential pairs, and a Gilbert cell mixer design, each with an associated integrated circuit layout. Layout tools used for these designs included two open-source packages—KLayout and Magic—which were customized for specific use with the OSU GaN process layers. Design rules and preliminary device extraction capabilities were built for the Magic tool to enable device extraction and subsequent netlist generation for SPICE simulation. Finally, future research directions for year two are summarized. When the year-two directions are implemented, the project will be in position to advance the state of the art in electronics for near- or in-reactor sensor interfacing and communications.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Life Cycle Inventories and Data Gap Analysis for Rare Earth Elements: Neodymium and Dysprosium from Mining to Magnets

The United States demand for Neodymium-Iron-Boron (NdFeB) magnets, produced from rare earth elements (REEs) such as (Nd) and Dysprosium (Dy), far exceeds its nascent domestic production capacity, rendering it reliant on vulnerable global supply chains dominated by China. To guide research and development investments in securing U.S. REE supply, defensible benchmark metrics across environmental, economic, and social dimensions are needed. In this study, we built globally-representative, process-based cradle-to-cradle life cycle inventories for Nd and Dy in NdFeB magnets lifecycles, encompassing primary material acquisition, beneficiation, smelting and refining, metal processing, specialty alloy and chemical transformation, subcomponent manufacturing, consumer application (use phase) and end-of-life management. We carried out detailed literature review, and applied process engineering principles to build industry-representative upscaled life cycle inventories for both metals. We used these models to conduct bottom-up literature review and gap analysis on existing literature, compilation of data sources for each life cycle stage (and transformations where necessary), and a preliminary technoeconomic analysis (TEA)/life cycle costing analysis (LCCA). Findings from this work emphasize the need for metal specific, representative REE LCIs to establish robust benchmarks for advancing sustainable REE technologies and guiding R&D in REE supply chains.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Creating a Lunar EVA Work Envelope

A work envelope has been defined for weightless Extravehicular Activity (EVA) based on the Space Shuttle Extravehicular Mobility Unit (EMU), but there is no equivalent for planetary operations. The weightless work envelope is essential for planning all EVA tasks because it determines the location of removable parts, making sure they are within reach and visibility of the suited crew member. In addition, using the envelope positions the structural hard points for foot restraints that allow placing both hands on the job and provides a load path for reacting forces. EVA operations are always constrained by time. Tasks are carefully planned to ensure the crew has enough breathing oxygen, cooling water, and battery power. Planning first involves computers using a virtual work envelope to model tasks, next suited crew members in a simulated environment refine the tasks. For weightless operations, this process is well developed, but planetary EVA is different and no work envelope has been defined. The primary difference between weightless and planetary work envelopes is gravity. It influences anthropometry, horizontal and vertical mobility, and reaction load paths and introduces effort into doing "overhead" work. Additionally, the use of spacesuits other than the EMU, and their impacts on range of motion, must be taken into account. This paper presents the analysis leading to a concept for a planetary EVA work envelope with emphasis on lunar operations. There is some urgency in creating this concept because NASA has begun building and testing development hardware for the lunar surface, including rovers, habitats and cargo off-loading equipment. Just as with microgravity operations, a lunar EVA work envelope is needed to guide designers in the formative stages of the program with the objective of avoiding difficult and costly rework.

Griffin, Brand N.↗

Panel Session 3: Prospects for Shared Solutions for Solving the WM Challenges for Small and Emerging Nuclear Countries

This panel focused on sharing WM solutions for small and emerging nuclear countries. As countries with substantial inventories of spent nuclear fuel pursue their national repository programs with varying degrees of progress, countries with only a few reactors and those at the beginning stages of their nuclear programs face a far different and substantial challenge toward developing a national solution. This session brought together a panel of experts from government and industry to explore shared solutions and next steps building off the recent progress made by international organizations and the recent efforts and lessons learned. Panelists with presentations: The Rationale for a Multinational Repository (Sean Tyson); Perspectives on the Future of the Multi-National Repository Concept (Alan Brownstein); Why Would any Country Accept Foreign Spent Nuclear Fuel? (Charles McCombie); Dual Track Strategy for Small Countries (Leon Kegel)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Building a CO 2 Economy in the Four Corners Region [Script plus Slides]

This project will assess options in the Four Corners region relative to developing a CO₂-based economy, considering both CO₂ supply (via capture) and CO₂ demand (utilization and storage). The assessment will consider a spectrum of opportunities at various stages of technology readiness, including their magnitude and regional distribution. An additional component (via a collaboration TBD) will evaluate the regional implications relative to economy and job growth.

54 ENVIRONMENTAL SCIENCES↗

Photocathode Preparation System for the ALICE Photoinjector

ALICE--Accelerators and Lasers in Combined Experiments--is a relatively new accelerator built at Daresbury Laboratory that will demonstrate the process of energy recovery by the end of 2008. The project is a research facility to develop the technology required to build a New Light Source (NLS) in the UK. This paper details the current ALICE photoinjector design and highlights the limitations before focusing on a photoinjector upgrade. The key component of the upgrade is a three-stage extreme high vacuum load-lock system that will be incorporated into the ALICE photoinjector in 2010. The load-lock system has de facto become a standard component of a type III-V semiconductor photocathode injector and comprises: 1) loading chamber to allow new photocathodes to be introduced, 2) cleaning chamber for atomic hydrogen cleaning of the photocathodes and, 3) a preparation and activation chamber where the photocathodes will be activated to the NEA state ready for use on the ALICE accelerator. Once commissioned the load-lock system will allow rapid transfer of photocathodes between the load-lock system and the ALICE photoinjector whilst maintaining the integrity of the vacuum system and providing many other benefits. The new load-lock system will not only remove the problems with the existing set-up, it will also permit a new vacuum chamber to be designed for the gun itself. This new design will also aim to improve vacuum performance by addressing some of the major vacuum associated problems ALICE has encountered in the past 2 years.

43 PARTICLE ACCELERATORS↗

Dissipation coefficients from scalar and fermion quantum field interactions

Dissipation coefficients are calculated in the adiabatic, near thermal equilibrium regime for a large class of renormalizable interaction configurations involving a two-stage mechanism, where a background scalar field is coupled to heavy intermediate scalar or fermion fields which in turn are coupled to light scalar or fermion radiation fields. These interactions are typical of warm inflation microscopic model building. Two perturbative regimes are shown where well defined approximations for the spectral functions apply. One regime is at high temperature, when the masses of both intermediate and radiation fields are less than the temperature scale and where the poles of the spectral functions dominate. The other regime is at low temperature, when the intermediate field masses are much bigger than the temperature and where the low energy and low three-momentum regime dominate the spectral functions. The dissipation coefficients in these two regimes are derived. However, due to resummation issues for the high temperature case, only phenomenological approximate estimates are provided for the dissipation in this regime. In the low temperature case, higher loop contributions are suppressed and so no resummation is necessary. In addition to inflationary cosmology, the application of our results to cosmological phase transitions is also discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Offline Software for the Mu2e Experiment

The Mu2e experiment at Fermilab is in the midst of its R&D and approval processes. To aid and inform this process, a small team has developed an end-to-end Geant4-based simulation package and has developed reconstruction code that is already at the stage of an advanced prototype. Having these tools available at an early stage allows design options and tradeoffs to be studied using high level physics quantities. A key to the success of this effort has been, as much as possible, to acquire software and customize it, rather than to build it in-house.

Kutschke, Robert K.↗

Plant security during decommissioning; challenges and lessons learned from German phase out decision

Purpose of this paper is to point out the security challenges that may occur during the decommissioning, based on the issues and lessons learned from the German phase out decision. Though national regulations may be different in other countries the basic problems and issues will be the same. Therefore presented solutions will be applicable in other countries as well. The radioactive material remaining at the NPP during decommissioning has the most influence on how the security measures have to be designed. The radioactive material defines the risk potential of the plant and this determines the needed security level. The following aspects have been challenging in Germany: - Scenarios varying from those, used for plants in operation, due to changed operating conditions - Spent fuel will stay in the spent fuel pool for a quite long period before it can be removed from the plant. Risk potential of the plant stays high and requires a high level of security measures - Security measures according to the existing operating license have to stay in place as they are, unless the first license for decommissioning is given respective the spent fuel is removed from the plant site. This even led to the question if improvements of security measures, planned and announced with focus on a plant remaining in operation for another couple of years, need to be done although they will not be required after removing the spent fuel from the plant. A further important aspect for the security design is the fact that a plant under decommissioning has completely different and strongly varying operating procedures, compared to the stable ones of an operating plant. This leads to different needs concerning workspace, infrastructure on plant site, access to buildings etc. An optimized and highly flexible security concept is needed to ensure an adequate level of security as well as an efficient decommissioning. A deep analysis of the vital plant functions, depending on the different decommissioning stages, is required to determine the vital equipment, its location and its need for protection. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Space station evolution: Planning for the future

The need for permanently manned presence in space has been recognized by the United States and its international partners for many years. The development of this capability was delayed due to the concurrent recognition that reusable earth-to-orbit transportation was also needed and should be developed first. While the decision to go ahead with a permanently manned Space Station was on hold, requirements for the use of the Station were accumulating as ground-based research and the data from unmanned spacecraft sparked the imagination of both scientists and entrepreneurs. Thus, by the time of the Space Station implementation decision in the early 1980's, a variety of disciplines, with a variety of requirements, needed to be accommodated on one Space Station. Additional future requirements could be forecast for advanced missions that were still in the early planning stages. The logical response was the development of a multi-purpose Space Station with the ability to evolve on-orbit to new capabilities as required by user needs and national or international decisions, i.e., to build an evolutionary Space Station. Planning for evolution is conducted in parallel with the design and development of the baseline Space Station. Evolution planning is a strategic management process to facilitate change and protect future decisions. The objective is not to forecast the future, but to understand the future options and the implications of these on today's decisions. The major actions required now are: (1) the incorporation of evolution provisions (hooks and scars) in the baseline Space Station; and (2) the initiation of an evolution advanced development program.

Diaz, Alphonso V.↗

STS-93: Columbia / Chandra Mission Overview (from JSC)

A press briefing held on July 7, 1999 reviews the progress of the Chandra X ray Observatory project. The tape begins with an animated view of the launch of the Chandra X ray Observatory from the shuttle, as it was planned. Next is a press briefing. Bryan Austin, the Lead Flight Director, discusses the five day mission, and the reason for the shortened length, due to the added weight from the Chandra Observatory. He also reviews the other payloads, and activities that will take place during the mission. Kenneth Ledbetter, Science Director Mission Development, discusses the 4 great observatories and the role of each. They are the Hubble, which observed visible light; Compton Gamma Ray Observatory, the Chandra, and the Space Infrared Telescope Facility. A time line of the expected operational lifetime of each of the 4 great observatories is shown. Specific information about the Chandra Telescope is reviewed. The last press briefing presenter is Fred Wojtalik, who is the Chandra Program Manager. He reviews the Chandra's components, and acknowledges a few of the many companies that contributed to its building. He also reviews the orbital activation and checkout sequences. Question that follows, center around contingency plans if some part of the planned sequence is not successful. The costs are reviewed, and concerns about the Initial Upper Stage, the propulsion unit required to take the Chandra to its high orbit are addressed. The Chandra is planned to take an eliptical orbit, which is higher than the other space telescopes, thus far launched due to the requirement to avoid Earth generated X rays.

Source record↗

Sharing Experiences within AREVA D and D Project Portfolio: Four Illustrations - 13049

Over the past ten years, AREVA has performed D and D operations on a wide range of nuclear sites, such as Marcoule and La Hague recycling plants, to Cadarache MOX fuel fabrication plant or Veurey and Annecy metallic Uranium machining plants. Each site is different from the other but some lessons can be shared through this D and D portfolio. In that respect, knowledge management is one of AREVA D and D Technical Department main missions. Four illustrations demonstrate the interest of knowledge share. Waste management is one of the key activities in D and D; It requires a specific characterization methodology, adapted logistics, and optimized waste channels, all of which have been developed over the years by AREVA teams on the site of Marcoule while they are rather new to La Hague, whose main activity remains fuel reprocessing despite the launch of UP2 400 D and D program. The transfer of know how has thus been organized over the past two years. Plasma cutting has been used extensively in Marcoule for years, while prohibited on the site of La Hague following questions raised about the risks associated wit Ruthenium sublimation. La Hague Technical Department has thus developed an experimental protocol to quantify and contain the Ruthenium risk, the result of which will then be applied to Marcoule where the Ruthenium issue has appeared in recent operations. Commissioning and operating fission products evaporators is a rather standard activity on UP2 800 and UP3, while the associated experience has been decreasing in Marcoule following final shutdown in 1998. When the French atomic Energy commission decided to build and operate a new evaporator to concentrate rinsing effluents prior to vitrification in 2009, AREVA La Hague operators were mobilized to test and commission the new equipment, and train local operators. Concrete scabbling is the final stage prior to the free release of a nuclear facility. In the context of Veurey and Annecy final cleanup and declassification, large scale concrete scabbling operations were conducted, and lead to the industrialization of the process and qualification of a new process, NiThrow{sup TM} scabbling technology, developed by AREVA. This experience has now been injected into La Hague D and D scenario and has allowed a significant gain in time and cost for scabbling operations. In short, the variety of experiences and sites under the responsibility of AREVA D and D teams present significant challenges, and yet provide a unique opportunity to innovate and qualify new tools and methods which can then be shared throughout the sites. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Adaptation of methodology to select structural alternatives of one-way slab in residential building to the guidelines of the European Committee for Standardization (CEN/TC 350)

The European Committee for Standardization (CEN) through its Technical Committee CEN/TC-350 is developing a series of standards for assessing the building sustainability, at both product and building levels. The practical application of the selection (decision making) of structural alternatives made by one-way slabs leads to an intermediate level between the product and the building. Thus the present study addresses this problem of decision making, following the CEN guidelines and incorporating relevant aspects of architectural design into residential construction. A life cycle assessment (LCA) is developed in order to obtain valid information for the decision making process (the LCA was developed applying CML methodology although Ecoindicator99 was used in order to facilitate the comparison of the values); this information (the carbon footprint values) is contrasted with other databases and with the information from the Environmental Product Declaration (EPD) of one of the lightening materials (expanded polystyrene), in order to validate the results. Solutions of different column disposition and geometries are evaluated in the three pillars of sustainable construction on residential construction: social, economic and environmental. The quantitative analysis of the variables used in this study enables and facilitates an objective comparison in the design stage by a responsible technician; the application of the proposed methodology reduces the possible solutions to be evaluated by the expert to 12.22% of the options in the case of low values of the column index and to 26.67% for the highest values. - Highlights: • Methodology for selection of structural alternatives in buildings with one-way slabs • Adapted to CEN guidelines (CEN/TC-350) for assessing the building sustainability • LCA is developed in order to obtain valid information for the decision making process. • Results validated comparing carbon footprint, databases and Env. Product Declarations • The proposal reduces the solutions to be evaluated to between 12.22 and 26.67%.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Status and future plans for C 3 R&D

C 3 is an opportunity to realize an e + e - collider for the study of the Higgs boson at √s = 250 GeV, with a well defined upgrade path to 550 GeV while staying on the same short facility footprint. C 3 is based on a fundamentally new approach to normal conducting linear accelerators that achieves both high gradient and high efficiency at relatively low cost. Given the advanced state of linear collider designs, the key system that requires technical maturation for C 3 is the main linac. This paper presents the staged approach towards a facility to demonstrate C 3 technology with both Direct (source and main linac) and Parallel (beam delivery, damping ring, ancillary component) R&D. The primary goal of the C 3 Demonstration R&D Plan is to reduce technical and cost risk by building and operating the key components of C 3 at an adequate scale. This R&D plan starts with the engineering design, and demonstration of one cryomodule and will culminate in the construction of a 3 cryomodule linac with pre-production prototypes. This R&D program would also demonstrate the linac rf fundamentals including achievable gradient and gradient stability over a full electron bunch train and breakdown rates. It will also investigate beam dynamics including energy spread, wakefields, and emittance growth. This work will be critical to confirm the suitability of the C 3 beam parameters for the physics reach and detector performance in preparation for a Conceptual Design Report (CDR), as well as for follow-on technology development and industrialization. The C 3 Demonstration R&D Plan will open up significant new scientific and technical opportunities based on development of high-gradient and high-efficiency accelerator technology. It will push this technology to operate both at the GeV scale and mature the technology to be reliable and provide high-brightness electron beams. The timeline for progressing with C 3 technology development will be governed by practical limitations on both the technical progress and resource availability. It consists of four stages: Stage 0) Ongoing fundamental R&D on structure prototypes, damping and vibrations. Stage 1) Advancing the engineering maturity of the design and developing start-to-end simulations including space-charge and wakefield effects. This stage will include testing of strucutres operating at cryogenic temperatures. Beam tests would be performed with high beam current to test full beam loading. Stage 2) Production and testing of the first cryomodule at cryogenic temperatures. This would provide sufficient experimental data to compile a CDR and it is anticipated for Stage 2 to last 3 years and to culminate with the transport of photo-electrons through the first cryomodule. Stage 3) Updates to the engineering design of the cryomodules, production of the second and third cryomodule and their installation. Lower charge and lower emittance beams will be used to investigate emittance growth. The successful full demonstration of the 3 cryomodules to deliver up to a 3 GeV beam and achieve the C 3 five gradient will allow a comprehensive and robust evaluation of the technical design of C 3 as well as mitigate technical, schedule, and cost risks required to proceed with a Technical Design Report (TDR).

radiation hardened magnets↗