Search NASA⌕ Search

SEARCH · Search NASA

Results for “Step Height”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Analysis on the Heat Transfer Phenomena Inside the Scaled-Down VHTR RCCS Riser Experiment

Very High Temperature gas-cooled Reactor (VHTR) that is one of GEN-IV reactors has been developed for the purpose of hydrogen production. VHTR is characterized by high operating temperature and stepped-up inherent safety given by passive safety systems such as Reactor Cavity Cooling System (RCCS). In case the active heat removal system losses its capability, RCCS significantly contributes to the inherent safety of VHTR by removing the decay heat transferred from the reactor core to the reactor vessel. Therefore, the performance of RCCS is the key parameter to ensure the safety of the reactor. Several computation and experiment researches on the performance of RCCS have been conducted. There are two types of RCCS depending on its coolant; one is the air-cooled type and the other is water-cooled type. This study focused on the former type. Due to the excessive height of the prototype RCCS, experiment facilities were constructed in reduced scale. Korea Atomic Energy Research Institute (KAERI) constructed the quarter-scale RCCS experiment facility, NACEF and Argonne National Laboratory (ANL) has constructed half-scale experiment facility, NSTF. University of Wisconsin (UW) also has the quarter-scale experiment facility and Texas A and M University has conducted separate effect test on the jet effect at the upper plenum of RCCS. From the reduced scale experiment result, the performance of RCCS such as a heat removal rate of RCCS and a peak temperature of reactor vessel were evaluated. When the reduced-scale result is applied to the prototype, however, a distortion could be brought about due to the reduced height of RCCS in the experiments. Especially, if the heat transfer regime inside the riser which roles as a heat exchanger to discharge the decay heat into the atmosphere is not identical, the riser wall temperature and the consequent reactor vessel temperature of the prototype could be incorrectly predicted. Thus, the convective heat transfer phenomena inside the riser duct both in the reduced scale and in the prototype is necessary to be investigated. In this study, the preliminary analysis on the heat transfer phenomena inside the RCCS riser was conducted. The subjects of the analysis were the prototype RCCS riser of PMR 200, and its scaled-down experiment facilities, NACEF. First, the geometry, flow and thermal conditions of the riser in PMR200 RCCS and NACEF were introduced with a scaling method. And then, the heat transfer regimes and the heat transfer coefficient corresponding to each condition were predicted using correlation and CFD calculation. Finally, planned activities including the experiment was introduced. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Functional Sensory-Motor Performance Following Long Term Space Flight: The First Results of "Field Test" Experiment

The effect that extended-duration space flights may have on human space travelers, including exploration missions, is widely discussed at the present time. Specifically, there is an increasing amount of evidence showing that the physical capacity of cosmonauts is significantly reduced after long-duration space flights. It is evident that the most impaired functions are those that rely on gravity, particularly up right posture and gait. Because of the sensorimotor disturbances manifested in the neurology of the posture and gait space flight and postflight changes may also be observed in debilitating motion sickness. While the severity of particular symptoms varies, disturbances in spatial orientation and alterations in the accuracy of voluntary movements are persistently observed after long-duration space flights. At this time most of the currently available data are primarily descriptive and not yet suitable for predicting operational impacts of most sensorimotor decrements observed upon landing on planetary surfaces or asteroids. In particular there are no existing data on the recovery dynamics or functionality of neurological, cardiovascular or muscle performance making it difficult to model or simulate the cosmonauts' activity after landing and develop the appropriate countermeasure that will ensure the rapid and safe recovery of crewmembers immediately after landing in what could be hostile environments. However and as a starting position, the videos we have acquired during recent data collection following the long duration flights of cosmonauts and astronauts walking and performing other tasks shortly after return from space flight speak volumes about their level of deconditioning. A joint Russian-American team has developed a new study specifically to address the changes in crewmembers performance and the recovery of performance with the intent of filling the missing data gaps. The first (pilot) phase of this study includes recording body kinematics and quantifying the coordination and timing of relatively simple basic movements - transition from seated and prone positions to standing, walking, stepping over obstacles, tandem walking, muscle compliance, as well as characteristics of postural sway and orthostatic tolerance. Testing for changes in these parameters have been initiated in the medical tent at the landing site. The first set of experiments showed that during the first hour after landing, cosmonauts and astronauts were able to execute (although slower and with more effort than preflight) simple movements such as egress from a seated or prone position and also to remain standing for 3.5 minutes without exhibiting pronounced cardiovascular changes. More challenging tests, however, demonstrated a prominent reduction in coordination - the obstacle task, for example, was performed at much slower speed and with a marked overestimation of the obstacle height and tandem walking was greatly degraded suggesting significant changes in proprioception, brainstem and vestibular function. There is some speculation that the neural changes, either from the bottom-up or top down may be long lasting; requiring compensatory responses that will modify or mask the adverse responses we have observed. Furthermore, these compensatory responses may actually be beneficial, helping achieve a more rapid adaptation to both weightlessness and a return to earth.

Tomilovskaya, E. S.↗

Validation of A Sensorimotor Disorientation Ground Analog

INTRODUCTION Simulating the sensorimotor disorientation effects of gravity transitions after prolonged stays in microgravity is exceedingly challenging on Earth. In a previous study [1], a Sensorimotor Disorientation Analog (SDA) was developed based on subjective feedback from previously flown astronauts. The purpose of this study was to validate this SDA by comparing performance in movement tasks that have a wealth of spaceflight data against task performance while using the SDA. METHODS Thirty healthy non-astronaut subjects (17 males, 13 females; Mean ± SD, Age: 33.5 ± 7.2 years, Height: 68.0 ± 3.4 in, Weight: 164 ± 26 lbs.) volunteered to participate in this study. Subjects performed three movement tasks: computerized dynamic posturography (CDP), obstacle walk, and tandem walk. For CDP, subjects maintained an upright stance for 20s with eyes closed on an unstable pitch sway-referenced platform with head erect (sensory organization test (SOT)-5) and with head pitch ±20° to an auditory cue(SOT-5M). The obstacle walk involved a sit-to-stand with 10s of quiet stance followed by walking to and around a cone placed 4m away while navigating a 30cm obstacle to the cone and back. The tandem walk involved walking heel-to-toe for approximately 10-12 steps with eyes open and eyes closed. Subjects performed the three movement tasks under three levels of the SDA replicating different time points of recovery: none (preflight), low (Return (R)+24- 48hours), and high (R+0- 24hours). The SDA included galvanic vestibular stimulation (GVS) to disorient the vestibular system and a weighted suit (trunk, wrists, and ankles) to alter proprioceptive feedback and replicate subjective heaviness. RESULTS As the SDA magnitude increased, overall performance outcomes decreased. However, the ability of the SDA to replicate the range of astronaut postflight performance was task dependent. CDP SOT-5 performance across SDA levels closely replicated astronaut performance at all time points. SOT-5M, however, had minimal performance changes across SDA levels and was unable to replicate astronaut performance. The obstacle walk showed performance changes across SDA levels and matched astronaut performance preflight and at R+24-48hrs (low). Obstacle walk performance at the high SDA level was reduced in comparison to the low level; however, it was not replicative of astronaut performance immediately after landing. Last, tandem walk had distinct groupings of performance across SDA levels and was able to elicit a high level of disorientation consistent with R+0-24 hours (high) postflight performance for eyes open and eyes closed. The low SDA level for both eyes open and eyes closed was more disruptive than previous crewmember performance at the R+24-48 hours timepoint. CONCLUSION The SDA was developed to replicate postflight sensorimotor disruptions. However, it is well-known that immediately post-landing, astronauts can experience motion sickness, dehydration, fatigue, orthostatic intolerance, illusory sensations, lumbar pain, etc. This multi-system response to return to 1G varies widely across astronauts and, as such, it was not unexpected that the extreme ends of responses in the R+0-24hrs time period were the most difficult to replicate. These results suggest that the SDA levels are able to elicit distinct performance groupings and, although not able to perfectly replicate R+0-24hrs, the SDA did replicate a large range of performance after return to Earth.

S C Moudy↗

Taguchi Design of Experiment Enabling the Reduction of Spikes on the Sides of Patterned Thin Films for Tunnel Junction Fabrication

Photolithographically patterned thin films often possess unwanted spikes along the side edges. These spikes are a significant issue for the development of spinvalve memory, tunnel junction based molecular devices, and micro-electromechanical systems. Here, we report a very simple, economical, and fast way of creating an optimum photoresist profile for the production of spike-free patterned films. This approach is based on performing a soaking step in the positive-photoresist’s developer solution before the UV exposure. However, the success of this method depends on multiple photolithography factors: photoresist thickness (governed by spin speed), soft baking temperature, soaking time in developer, and exposure time. In this paper, we report our systematic experiments to study the effect of these factors by following the L9 experimental scheme of the Taguchi Design of experiment (TDOE) approach. The L9 experiment scheme effectively accommodated the study of four photolithography factors, each with three levels. After performing photolithography as per L9 TDOE scheme, we sputter deposited 20 nm Tantalum to check the side edge profile of the patterned film by atomic force microscope (AFM). We measured the heights of the spikes along the thin film edges. We utilized spike height as the desired property and chose “smaller the better” criteria for the TDOE analysis. TDOE enabled us to understand the relative importance of the parameters, relationship among the parameters, and impact of the various levels of the parameters on the thin film edge profile. TDOE analysis yielded an optimum combination of levels for the four photolithography factors. The optimum combination of photolithography factors included spin speed 4000 rpm, 100 °C soft baking temperature, 60 sec pre-soaking in the developer solution, and 15 sec UV exposure. We validated the TDOE by AFM and observed spike free patterned films. Here, we also made complete tunnel junction devices by utilizing the optimized photolithography factors for the bottom electrode and obtained excellent tunneling behavior. In summary, this study provides a very simple, economical, and fast photolithography approach for creating optimum photoresist profile for the micro-nano scale devices and electromechanical structures.

36 MATERIALS SCIENCE↗

LiDAR-Aided Interior Orientation Parameters Refinement Strategy for Consumer-Grade Cameras Onboard UAV Remote Sensing Systems

Unmanned aerial vehicles (UAVs) are quickly emerging as a popular platform for 3D reconstruction/modeling in various applications such as precision agriculture, coastal monitoring, and emergency management. For such applications, LiDAR and frame cameras are the two most commonly used sensors for 3D mapping of the object space. For example, point clouds for the area of interest can be directly derived from LiDAR sensors onboard UAVs equipped with integrated global navigation satellite systems and inertial navigation systems (GNSS/INS). Imagery-based mapping, on the other hand, is considered to be a cost-effective and practical option and is often conducted by generating point clouds and orthophotos using structure from motion (SfM) techniques. Mapping with photogrammetric approaches requires accurate camera interior orientation parameters (IOPs), especially when direct georeferencing is utilized. Most state-of-the-art approaches for determining/refining camera IOPs depend on ground control points (GCPs). However, establishing GCPs is expensive and labor-intensive, and more importantly, the distribution and number of GCPs are usually less than optimal to provide adequate control for determining and/or refining camera IOPs. Moreover, consumer-grade cameras with unstable IOPs have been widely used for mapping applications. Therefore, in such scenarios, where frequent camera calibration or IOP refinement is required, GCP-based approaches are impractical. To eliminate the need for GCPs, this study uses LiDAR data as a reference surface to perform in situ refinement of camera IOPs. The proposed refinement strategy is conducted in three main steps. An image-based sparse point cloud is first generated via a GNSS/INS-assisted SfM strategy. Then, LiDAR points corresponding to the resultant image-based sparse point cloud are identified through an iterative plane fitting approach and are referred to as LiDAR control points (LCPs). Finally, IOPs of the utilized camera are refined through a GNSS/INS-assisted bundle adjustment procedure using LCPs. Seven datasets over two study sites with a variety of geomorphic features are used to evaluate the performance of the developed strategy. The results illustrate the ability of the proposed approach to achieve an object space absolute accuracy of 3–5 cm (i.e., 5–10 times the ground sampling distance) at a 41 m flying height.

47 OTHER INSTRUMENTATION↗

Waters Loads on the XJL-1 Hull as Obtained in Langley Impact Basin, TED No. NACA 2413.3

An investigation was conducted in the Langley impact basin of the water loads on a half scale model of the XJL-1 hull whose forebody has a vee bottom with exaggerated chine flare. The impact loads, moments, and pressures were determined for a range of landing conditions. A normal full-scale landing speed of 86 miles per hour was represented with effective flight paths ranging from 0.6deg to 11.6deg. Landings were made with both fixed trim and free-to-trim mounting of the float over a trim range of -15deg to 12deg into smooth water and into waves having equivalent full-scale length. of 120 feet and heights ranging from 1 to 4 feet. All data and results presented in this report are given in terms of equivalent full-scale values. Summary tables and illustrative plots are used in presenting the material. The following maximum values of load and pressure are those which are apropos for effective flight paths less than 6.5deg which was the maximum value obtained in tests with the XJL-1 hull model representing full-scale landings with vertical velocity of 4.5 feet per second into 4-foot waves. The maximum local pressure on the flat portion of the bottom is 130 pounds per square inch which was measured on a 2-inch-diameter circular area near the step. The maximum local pressure obtained in the curved area near the chines is 200 pounds per square inch. This pressure was also measured near the step.

Steiner, Margaret F.↗

Magnetic fields interacting with nonlinear compressible convection

Two-dimensional numerical simulations are used to study fully compressible convection in the presence of an imposed magnetic field. Highly nonlinear flows are considered that span multiple density scale heights. The convection tends to sweep the initially uniform vertical magnetic field into concentrated flux sheets with significant magnetic pressures. These flux sheets are partially evacuated, and effects of buoyancy and Lorentz forces there can serve to suppress motions. The flux sheets can be surrounded by a sheath of descending flow. If the imposed magnetic field is sufficiently strong, the convection can become oscillatory. The unstably stratified fluid layer has an initial density ratio (bottom to top of layer) of 11. Surveys of solutions at fixed Rayleigh number sample Chandrasekhar numbers from 1 to 1000 and magnetic Prandtl numbers from 1/16 to 1. These nonlinear simulations utilize a two-dimensional numerical scheme based on a modified two-step Lax-Wendroff method.

Hulburt, Neal E.↗

Structure factor of model bidisperse ferrofluids with relatively weak interparticle interactions

In the present manuscript we develop a theoretical approach to describe the pair correlation function of bidisperse magnetic dipolar hard- and soft-spheres. We choose bidisperse system as the first step to allow for polydispersity when studying thermodynamics of magnetic fluids. Using diagram technique we calculate the virial expansion of the pair correlation function up to the first order in density and fourth order in the dipolar strength. Even though, the radial distribution functions are extremely sensitive to the steric potential, we show that the behaviour of the isotropic centre-centre structure factor is almost indifferent to the type of the short-range repulsion. We extensively compare our theoretical results to the data of molecular dynamics simulations, which helps us to understand the range of validity of the virial expansion both on density and magnetic dipolar strength. We also investigate the influence of the granulometric composition on the height, width, and position of the structure factor first peak in order to clarify whether it is possible to extract structural information from experimentally measured small angle neutron scattering intensities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Remote-Controlled Removal of Bricks from a Reactor Shaft: An Unconventional Approach - 16406

The first German prototype Fast Breeder Nuclear Reactor (KNK) is currently being dismantled after being the only operating Fast Breeder-type reactor in Germany. The complete dismantling is based on 10 decommissioning permits. Package 3 of the 9. decommissioning permit, which is currently under preparation, comprises the dismantling of the biological shield. Package 2 comprised the dismantling of the Primary Shield. In preparation to lift the 14 primary shield segments on height of the reactor core, these were milled at 16 positions and equipped with a total of 26 holes. As a result of the milling and drilling process, an estimated amount of 500-600 kg cast iron swarfs accumulated at the bottom of the 12 m deep reactor shaft. The cobalt in the cast iron was activated to cobalt-60 during operation. This results in a measurable dose-rate of 30-35 mSv/h. At the conical bottom of the reactor shaft were still the remaining parts of the thermal insulation consisting of a lining with brick stones, covered with loose remnants of the thermal insulation, loose metallic residues and cut-off wheels of the angel grinder. For the next dismantling step, the removal of the activated part of the biological shield, it is necessary that the cast iron swarfs must be removed as well as the remains of the thermal insulation. Firstly, this is necessary to reduce the dose rate inside the shaft for subsequent breakthrough operations and, secondly to have a statically resilient surface for the installation of a necessary working platform for next dismantling tools. There was no access for personnel. A manual removal was also not possible due to the existing dose rate. The cast iron swarfs supposed to be removed by a remote controlled suction unit, which was installed on top of a drum and mounted in a special rack. The complete system was lowered into the reactor shaft by using a crane. After removing the major amount of swarfs, the remaining swarfs as well as the sheet metal liner should be collected with a magnetic grabber. The solution for the metal removal was easy to realize, but there was no idea how to remove the remaining bricks remote controlled out of the reactor shaft. Another boundary was that only existing facilities were supposed to be used in addition to the new suction system, i.e. the existing cranes, gripper, as well as the double lid lock of the encasing for the handling of the vacuum cleaner, the transport of the drum and the lock procedure. The design essentially consists of a suction unit and a collecting unit. Both units are connected hooked by the three single suspension chains on the rack on the traverse and connection of the suction tube. Subsequently the entire unit was drained in the 12 m deep reactor shaft. The entire unit has been lifted out of the reactor shaft and placed on a defined set-down position. At this position, now both of the units could be separated by using the Master-Slave-Manipulator in the encasing (A100). By using different suction pipes the reactor shaft bottom could be exempted from the cast iron swarfs within a few days. The suction unit worked in such a positive way that it was decided to remove the loose refractory bricks, metallic residues, cut off wheels, etc., too. Metal parts remaining on the ground were removed by a magnet. This pragmatic approach avoided additional complex design works and the need of constructing special solutions and thus, massively saved time, cost and dose rate. The duration of planning, permission including implementation amounted to approximately 3 to 4 months. The additional work could be performed directly after the actual dismantling step.

07 ISOTOPE AND RADIATION SOURCES↗

Comprehensive Evaluation of Fast-Response, Reynolds-Averaged Navier–Stokes, and Large-Eddy Simulation Methods Against High-Spatial-Resolution Wind-Tunnel Data in Step-Down Street Canyons

Three computational fluid dynamics (CFD) methods with different levels of flow-physics modelling are comprehensively evaluated against high-spatial-resolution wind-tunnel velocity data from step-down street canyons (i.e., a short building downwind of a tall building). The first method is a semi-empirical fast-response approach using the Quick Urban Industrial Complex (QUIC-URB) model. The second method solves the Reynolds-averaged Navier–Stokes (RANS) equations, and the third one utilizes a fully-coupled fluid-structure interaction large-eddy simulation (LES) model with a grid-turbulence inflow generator. Unlike typical point-by-point evaluation comparisons, here the entire two-dimensional wind-tunnel dataset is used to evaluate the dynamics of dominant flow topological features in the street canyon. Each CFD method is scrutinized for several geometric configurations by varying the downwind-to-upwind building-height ratio (H d /H u ) and street canyon-width to building-width aspect ratio (S / W) for inflow winds perpendicular to the upwind building front face. Disparities between the numerical results and experimental data are quantified in terms of their ability to capture flow topological features for different geometric configurations. Ultimately, all three methods qualitatively predict the primary flow topological features, including a saddle point and a primary vortex. But, the secondary flow topological features, namely an in-canyon separation point and secondary vortices, are only well represented by the LES method despite its failure for taller downwind building cases. Misrepresentation of flow-regime transitions, exaggeration of the coherence of recirculation zones and wake fields, and overestimation of downwards vertical velocity into the canyon are the main defects in QUIC-URB, RANS and LES results, respectively. All three methods underestimate the updrafts and, surprisingly, QUIC-URB outperforms RANS for the streamwise velocity component, while RANS is superior to QUIC-URB for the vertical velocity component in the street canyon.

58 GEOSCIENCES↗

Data for Characterization of the Ghd8 Flowering Time Gene in a Mini-Core Collection of Miscanthus sinensis

The optimal flowering time for bioenergy crop miscanthus is essential for environmental adaptability and biomass accumulation. However, little is known about how genes controlling flowering in other grasses contribute to flowering regulation in miscanthus. Here, we report on the sequence characterization and gene expression of Miscanthus sinensisGhd8 , a transcription factor encoding a HAP3/NF-YB DNA-binding domain, which has been identified as a major quantitative trait locus in rice, with pleiotropic effects on grain yield, heading date and plant height. In M. sinensis , we identified two homoeologous loci, MsiGhd8A located on chromosome 13 and MsiGhd8B on chromosome 7, with one on each of this paleo-allotetraploid species’ subgenomes. A total of 46 alleles and 28 predicted protein sequence types were identified in 12 wild-collected accessions. Several variants of MsiGhd8 showed a geographic and latitudinal distribution. Quantitative real-time PCR revealed that MsiGhd8 expressed under both long days and short days, and MsiGhd8B showed a significantly higher expression than MsiGhd8A . The comparison between flowering time and gene expression indicated that MsiGhd8B affected flowering time in response to day length for some accessions. This study provides insight into the conserved function of Ghd8 in the Poaceae, and is an important initial step in elucidating the flowering regulatory network of Miscanthus.

Feedstock Production↗

Characterization of the Ghd8 Flowering Time Gene in a Mini-Core Collection of Miscanthus sinensis

The optimal flowering time for bioenergy crop Miscanthus is essential for environmental adaptability and biomass accumulation. However, little is known about how genes controlling flowering in other grasses contribute to flowering regulation in Miscanthus. Here, we report on the sequence characterization and gene expression of Miscanthus sinensisGhd8, a transcription factor encoding a HAP3/NF-YB DNA-binding domain, which has been identified as a major quantitative trait locus in rice, with pleiotropic effects on grain yield, heading date and plant height. In M. sinensis, we identified two homoeologous loci, MsiGhd8A located on chromosome 13 and MsiGhd8B on chromosome 7, with one on each of this paleo-allotetraploid species’ subgenomes. A total of 46 alleles and 28 predicted protein sequence types were identified in 12 wild-collected accessions. Several variants of MsiGhd8 showed a geographic and latitudinal distribution. Quantitative real-time PCR revealed that MsiGhd8 expressed under both long days and short days, and MsiGhd8B showed a significantly higher expression than MsiGhd8A. The comparison between flowering time and gene expression indicated that MsiGhd8B affected flowering time in response to day length for some accessions. This study provides insight into the conserved function of Ghd8 in the Poaceae, and is an important initial step in elucidating the flowering regulatory network of Miscanthus.

geographic distribution↗

Preliminary Results from an Assimilation of Saharan Dust Using TOMS Radiances and the GOCART Model

At NASA Goddard we are developing a global aerosol data assimilation system that combines advances in remote sensing and modeling of atmospheric aerosols. The goal is to provide high resolution, 3-D aerosol distributions to the research community. Our first step is to develop a simple assimilation system for Saharan mineral aerosol. The Goddard Chemistry and Aerosol Radiation model (GOCART) provides accurate 3-D mineral aerosol size distributions. Surface mobilization, wet and dry deposition, convective and long-range transport are all driven by assimilated fields from the Goddard Earth Observing System Data Assimilation System, GEOS-DAS. Our version of GOCART transports sizes from .08-10 microns and only simulates Saharan dust. We draw the assimilation to two observables in this study: the TOMS aerosol index (Al) which is directly related to the ratio of the 340 and 380 radiances and the 380 radiance alone. The forward model that simulates the observables requires the aerosol optical thickness, the single scattering albedo and the height of the aerosol layer from the GOCART fields. The forward model also requires a refractive index for the dust. We test three index values to see which best fits the TOMS observables. These are 1) for Saharan dust reported by Patterson, 2) for a mixture of Saharan dust and a highly reflective material (sea salt or sulfate) and 3) for pure illite. The assimilation works best assuming either pure illite or the dust mixture. Our assimilation cycle first determines values of the aerosol index (Al) and the radiance at 380 nm based on the GOCART aerosol fields. Differences between the observed and GOCART model calculated Al and 380 nm radiance are first analyzed horizontally using the Physical-space Statistical Analysis System (PSAS). A quasi-Newton iteration is then performed to produce analyzed 3D aerosol fields according to parameterized background and observation error covariances. We only assimilate observations into the the GOCART model over regions of Africa and the Atlantic where mineral aerosols are dominant and carbonaceous aerosols are minimal.

Weaver, C. J.↗

Towards Unifying the Planetary Boundary Layer and Shallow Convection in CAM5 with the Eddy-Diffusivity/Mass-Flux Approach

The modular structure of the boundary layer and convection parameterizations in atmospheric models have long been affecting the numerical representation of subgrid-scale motions and their mutual interactions. A promising alternative, the eddy-diffusivity/mass-flux approach (EDMF), has the potential for unifying the existing formulations into a consistent scheme and improving some of the long-standing issues. This study documents a step towards developing such a unified approach by implementing a stochastic multi-plume EDMF scheme into the Community Atmosphere Model (Version 5.0). Its performance in single-column mode is evaluated against the control parameterization and large-eddy simulation (LES) for two benchmark cases: marine and continental shallow convection. Overall, the results for the two parameterizations agree well with each other and with LES in terms of mean profiles of moist conserved variables and their vertical fluxes, as well as the updraft properties. However, systematic differences between the two schemes, especially for transient continental convection, are also documented. Using EDMF helps improve some of the parameterized features of shallow convection. In particular, for the highest tested vertical resolution, the EDMF cloud base and top heights and the vertical fluxes of energy and water are remarkably close to LES.

54 ENVIRONMENTAL SCIENCES↗

The CU 2-D-MAX-DOAS instrument – Part 1: Retrieval of 3-D distributions of NO 2 and azimuth-dependent OVOC ratios

Here, we present an innovative instrument telescope and describe a retrieval method to probe three-dimensional (3-D) distributions of atmospheric trace gases that are relevant to air pollution and tropospheric chemistry. The University of Colorado (CU) two-dimensional (2-D) multi-axis differential optical absorption spectroscopy (CU 2-D-MAX-DOAS) instrument measures nitrogen dioxide (NO 2 ), formaldehyde (HCHO), glyoxal (CHOCHO), oxygen dimer (O 2 –O 2 , or O 4 ), and water vapor (H 2 O); nitrous acid (HONO), bromine monoxide (BrO), and iodine monoxide (IO) are among other gases that can in principle be measured. Information about aerosols is derived through coupling with a radiative transfer model (RTM). The 2-D telescope has three modes of operation: mode 1 measures solar scattered photons from any pair of elevation angle (–20° < EA < +90° or zenith; zero is to the horizon) and azimuth angle (–180° < AA < +180°; zero being north); mode 2 measures any set of azimuth angles (AAs) at constant elevation angle (EA) (almucantar scans); and mode 3 tracks the direct solar beam via a separate view port. Vertical profiles of trace gases are measured and used to estimate mixing layer height (MLH). Horizontal distributions are then derived using MLH and parameterization of RTM (Sinreich et al., 2013). NO 2 is evaluated at different wavelengths (350, 450, and 560 nm), exploiting the fact that the effective path length varies systematically with wavelength. The area probed is constrained by O 4 observations at nearby wavelengths and has a diurnal mean effective radius of 7.0 to 25 km around the instrument location; i.e., up to 1960 km 2 can be sampled with high time resolution. The instrument was deployed as part of the Multi-Axis DOAS Comparison campaign for Aerosols and Trace gases (MAD-CAT) in Mainz, Germany, from 7 June to 6 July 2013. We present first measurements (modes 1 and 2 only) and describe a four-step retrieval to derive (a) boundary layer vertical profiles and MLH of NO 2 ; (b) near-surface horizontal distributions of NO 2 ; (c) range-resolved NO 2 horizontal distribution measurements using an "onion-peeling" approach; and (d) the ratios HCHO to NO 2 ( R FN ), CHOCHO to NO 2 ( R GN ), and CHOCHO to HCHO ( R GF ) at 14 pre-set azimuth angles distributed over a 360° view. Three-dimensional distribution measurements with 2-D-MAX-DOAS provide an innovative, regional perspective of trace gases as well as their spatial and temporal concentration gradients, and they maximize information to compare near-surface observations with atmospheric models and satellites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Giovanni: A System for Rapid Access, Visualization and Analysis of Earth Science Data Online

Collecting data and understanding data structures traditionally are the first steps that a user must take, before the core investigation can begin. This is a time-consuming and challenging task, especially when science objectives require users to deal with large multi-sensor data that are usually in different formats and internal structures. The Goddard Earth Sciences Data and Information Services Center (GES DISC) has created the GES DISC Interactive Online Visualization and ANalysis Infrastructure, Giovanni, to enable Web-based visualization and analysis of satellite remotely sensed meteorological, oceanographic, and hydrologic data sets, without users having to download data. The current operational Giovanni interfaces provide the capability to process a number of important satellite measurements, such as (1) ozone and other trace gases from TOMS, OMI, HALOE, and MLS; (2) air temperature, water vapor, and geopotential height from AIRS; (3) aerosols from MODIS TerrdAqua, and GOCART model; (4) precipitation from TRMM and ground measurements; (5) chlorophyll and other ocean color products from SeaWiFS and MODIS Aqua; and (6) sea surface temperature from MODIS Aqua. Depending on the input data structure, the system provides simple statistical analysis and creates time-averaged area plot, area-averaged time series, animations, Hovmoller latitude vs. time and longitude vs. time plots, as well as vertical profiles. The inter-comparison interfaces allow a user to compare observations from different instruments, to conduct anomaly analysis, and to study basic relationships between physical parameters. Giovanni handles data with different temporal and spatial resolutions and, thus, enables both regional and global long-term climate research and short-term special events investigation, as well as data validations and assessments. Because of its simplicity of usage, Giovanni is powerful and versatile, able to assist a wide range of users, from the discipline scientists conducting preliminary research in various fields, to students in the classroom learning about weather, climate, and other natural phenomena. Giovanni can be accessed from: http://disc. esfc.nasa.gov/techlab/giovanni/index.shtml

Shen, S.↗

The developments and verifications of trace model for IIST LOCA experiments

The test facility IIST (INER Integral System Test) is a Reduced-Height and Reduced-Pressure (RHRP) integral test loop, which was constructed for the purposes of conducting thermal hydraulic and safety analysis of the Westinghouse three-loop PWR Nuclear Power Plants. The main purpose of this study is to develop and verify TRACE models of IIST through the IIST small break loss of coolant accident (SBLOCA) experiments. First, two different IIST TRACE models which include a pipe-vessel model and a 3-D vessel component model have been built. The steady state and transient calculation results show that both TRACE models have the ability to simulate the related IIST experiments. Comparing with IIST SBLOCA experiment data, the 3-D vessel component model has shown better simulation capabilities so that it has been chosen for all further thermal hydraulic studies. The second step is the sensitivity studies of two phase multiplier and subcooled liquid multiplier in choked flow model; and two correlation constants in CCFL model respectively. As a result, an appropriate set of multipliers and constants can be determined. In summary, a verified IIST TRACE model with 3D vessel component, and fine-tuned choked flow model and CCFL model is established for further studies on IIST experiments in the future. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗