Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structured light scanning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Ultra-broadband infrared pump-probe spectroscopy using synchrotron radiation and a tuneable pump

Synchrotron infrared sources have become popular mainly because of their excellent broadband brilliance, which enables spectroscopically resolved spatial-mapping of stationary objects at the diffraction limit. In this article we focus on an often-neglected further advantage of such sources - their unique time-structure - to bring such broadband spectroscopy to the time domain, for studying dynamic phenomenon down to the 100 ps limit. We describe the ultra-broadband (12.5 to 1.1 {mu}m) Fourier transform pump-probe setup, for condensed matter transmission- and reflection-spectroscopy, installed at the X01DC infrared beam-line of the Swiss Light Source (SLS). The optical pump consists of a widely tuneable 100 ps 1 kHz laser system, covering 94% of the 16 to 1.1 {mu}m range. A thorough description of the system is given, including (i) the vector-modulator providing purely electronic tuning of the pump-probe overlap up to 1 ms with sub-ps time resolution, (ii) the 500 MHz data acquisition system interfaced with the experimental physics and industrial control system (EPICS) based SLS control system for consecutive pulse sampling, and (iii) the step-scan time-slice Fourier transform scheme for simultaneous recording of the dual-channel pumped, un-pumped, and difference spectra. The typical signal/noise ratio of a single interferogram in a 100 ps time slice is 300 (measured during one single 140 s TopUp period). This signal/noise ratio is comparable to that of existing gated Globar pump-probe Fourier transform spectroscopy, but brings up to four orders of magnitude better time resolution. To showcase the utility of broadband pump-probe spectroscopy, we investigate a Ge-on-Si material system similar to that in which optically pumped direct-gap lasing was recently reported. We show that the mid-infrared reflection-spectra can be used to determine the optically injected carrier density, while the mid- and near-infrared transmission-spectra can be used to separate the strong pump-induced absorption and inversion processes present at the direct-gap energy.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The effects of hydrothermal temperature on the photocatalytic performance of ZnIn{sub 2}S{sub 4} for hydrogen generation under visible light irradiation

Highlights: • The ZnIn{sub 2}S{sub 4} (120, 140, 160, 180, and 200 °C) was prepared. • The activities splitting water to hydrogen under visible light were evaluated. • The activity achieved the best when hydrothermal temperature was 160 °C. • The activity order is related to the surface morphology and surface defects. - Abstract: A series of ZnIn{sub 2}S{sub 4} photocatalysts were successfully synthesized using the hydrothermal method with different hydrothermal temperatures (120, 140, 160, 180, and 200 °C) and characterized by various analysis techniques, such as UV–vis, XRD, SEM, BET and PL. The results indicated that these photocatalysts had a similar band gap. The hydrothermal temperature had a huge influence on the properties of the photocatalysts such as the BET surface area, the total pore volume, the average pore diameter, the defects and the morphology. The photocatalytic activities of ZnIn{sub 2}S{sub 4} were evaluated based on photocatalytic hydrogen production from water under visible-light irradiation. The activity order is attributed to the coefficient of the surface morphology and the surface defects. The hydrogen production efficiency achieved the best when the hydrothermal temperature was 160 °C. On the basis of the characterization of the catalysts, the effects of the hydrothermal temperature on the photocatalytic activity of ZnIn{sub 2}S{sub 4} were discussed.

36 MATERIALS SCIENCE↗

Development of Parameters for the Particle Size Distribution of TATB

Laser light scattering (LLS), manual counting of scanning electron microscopy (SEM) images, and reduction of SEM images using ImageJ (open source program) to determine Feret (caliper) diameters were applied to determine particle size distribution (PSD) of four preparations of 1,3,5‐triamino‐2,4,6‐trinitrobenzene (TATB) and yttria‐stabilized zirconia (YSZ), an SEM certified standard. Mie theory was used to reduce the LLS data. The spherical nature of the YSZ made it a good candidate for LLS. Variations in n , the refractive index, and iκ, the imaginary component, produced very little change in the PSD. However, changing the carrier liquid from H 2 O to a 40% aqueous sucrose solution, thereby changing the carrier refractive index, n 0 , substantially affected the PSD. The Mie complex refractive indices for the YSZ were n = 2.200, iκ = 0.100, with a 40% aqueous sucrose solution, n 0 = 1.400. The triclinic crystal structure of TATB made refractive index determinations more difficult, so a study was conducted varying Mie parameters and comparing them to the same data reduced using the Fraunhofer theory. Changing the n and κ parameters produced PSD with a small concentration of particles less than 1 µm in size or none in this range. SEM images, Feret data, manual counting, and Fraunhofer data reduction indicate particles less than 1 µm are probably < 5% in concentration. The final selection of Mie parameters for TATB was n = 2.283, iκ = 0.1, and suspension medium, n 0 = 1.330. Finally, computations, using density functional theory produced similar parameters.

Feret diameter↗

Nanostructure-Driven Ion Transport in PCBM-Based Polymer Electrolytes

Nanostructure-Driven Ion Transport in PCBM-Based Polymer ElectrolytesChe-Nan Sun1, Thomas A. Zawodzinski1,2, Fei Ren3, Jong Kahk Keum1 and Jihua Chen1, (1)Oak Ridge National Laboratory, (2)The University of Tennessee, (3)Temple University Polyethylene oxide or PEO is an extensively-examined candidate for solid polymer electrolyte materials of lithium ion batteries, and its composite electrolytes has promising ion conductivities.[1-3] Oxide nanoparticles with sizes of 5-10 nm are often introduced into these polymer-based composite electrolytes in order to suppress their room-temperature crystallite formation.1-9 The size, geometry and surface functionality of the added particles were known to largely affect the structure and performance of the blended electrolytes.5,10 In this study, we examined a functionalized-fullerene-based composite electrolytes, providing details in their self-assembled nanostructures, modulus, hardness, as well as temperature-dependent ion-conducting behaviors. To the best of our knowledge, no fullerene-based, lithium conducting, composite electrolyte has been reported previously. Herein we used a bench-mark fullerene derivative, phenyl-C61-butyric acid methyl ester (PCBM) as a model fullerene compound and performed impedance spectroscopy, equivalent circuit modeling, nanoscale elemental mapping (in transmission electron microscope), wide-angle X-ray diffraction, as well as nanoindentation to shed light on a 6-fold enhancement in low temperature (less than 50oC) ion conductivity of PEO - lithium bis(trifluoromethanesulfonyl) imide (LiTFSI)-PCBM electrolytes, along with the underlying changes in nanomorphology , mechanical properties, and crystal structures. Based on a previous density functional theory (DFT) calculation, 11 the interaction energies Ei among PEO polymers is estimated to be 2.58 kcal mol-1 per monomer, the Ei between PCBM and PEO is 3.50 kcal mol-1 per monomer (PCBM is taken as 1 repeat unit), and the Ei among PCBMs themselves is 6.01 kcal mol-1 per monomer. This explains that at very low PCBM weight percentage, without sufficient PCBM-PCBM contacts, it is more energetically favorable for fullerenes to disperse into PEO matrix. However, with higher PCBM concentration, the fullerenes will efficiently pack with each other into domains with gradually increased dimensions. Quantification of PCBM domains is performed by line scan analysis of energy filtered TEM (EFTEM) images. Upon the addition of PCBM, the average domain sizes gradually increase from 3.4±1 nm ( 0% PCBM), to 4.6±1 nm (10% PCBM) and 4.9±2 nm (20% PCBM), and finally to 7.5±5 nm (40% PCBM ). (A precise determination of PCBM domain dimension is not possible when the domain size is less than 3 nm, due to the lack of EFTEM contrast in these samples). We attribute the observed ion conductivity improvement to those nanomorphological variation in PCBM-PEO-LiTFSi systems.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Crashworthiness characteristics of a carbon fiber reinforced dual-phase epoxy–polyurea hybrid matrix composite

In this paper, the crashworthiness characteristics of rectangular tubes made from a Carbon-fiber reinforced Hybrid-Polymeric Matrix (CHMC) composite were investigated using quasi-static and impact crush tests. The hybrid matrix formulation of the CHMC was created by combining an epoxy-based thermosetting polymer with a lightly crosslinked polyurea elastomer at various cure-time intervals and volumetric ratios. The load–displacement responses of both CHMC and carbon-fiber reinforced epoxy (CF/epoxy) specimens were obtained under various crushing speeds; and crashworthiness parameters, such as the average crushing force and specific energy absorption (SEA), were calculated using subsequent load–displacement relationships. The CHMC maintained a high level of structural integrity and post-crush performance, relative to traditional CF/epoxy. The influence of the curing time and volumetric ratios of the polyurea/epoxy dual-hybridized matrix system on the crashworthiness parameters was also investigated. The results reveal that the load carrying capacity and total energy absorption tend to increase with greater polyurea thickness and lower elapsed reaction curing time of the epoxy although this is typically a function of the loading rate. In conclusion, the mechanism by which the CHMC provides increased damage tolerance was also investigated using scanning electron microscopy (SEM).

36 MATERIALS SCIENCE↗

Nanosized precipitates and dislocation networks reinforced C-containing CoCrFeNi high-entropy alloy fabricated by selective laser melting

Highlights: • The SML C-containing CoCrFeNi HEA presents cellular and columnar subgrain structures. • The subgrain boundaries are made of dislocation networks with elements segregations. • The nanosized carbides distribute at grain boundary and subgrain boundaries. • The unique structure of the SLM HEA results in an outstanding yield strength. - Abstract: In this paper, we report a selective laser melted C-containing CoCrFeNi high-entropy alloy (HEA) with unique cellular and columnar subgrain structures. The subgrain boundaries are made of dislocation networks decorated by the segregation of Cr element and nanosized M{sub 23}C{sub 6}-type carbides. Structural characterization of dislocations and dislocation reactions in dislocation networks was conducted using high-resolution transmission electron microscopy. The high strength of the C-containing HEA is attributed to dislocation networks strengthening and nanosized carbides strengthening. These findings can provide a guidance for developing HEAs with superior mechanical properties, particularly high strength.

36 MATERIALS SCIENCE↗

Thermodynamic and Kinetic Transitions of Liquids in Nanoconfinement

Core principles of chemistry are ubiquitously invoked to shed light on the nature of molecular level interactions in nanoconfined fluids, which play a pivotal role in a wide range of processes in geochemistry, biology, and engineering. A detailed understanding of the physicochemical processes involved in the flow, structural transitions, and freezing or melting behavior of fluids confined within nanometer-sized pores of solid materials is thus of enormous importance for both basic research and technological applications. This Account provides a perspective on new insights into the thermodynamic and kinetic transitions of nanoconfined fluids in their stable and metastable forms. After briefly introducing the unique properties of mesoporous silicas from the SBA, MCM, and FDU families that serve as the confinement matrices, combining highly ordered single and bimodal mesopore architectures with tunable pore sizes in the ~2-15 nm range and narrow size distributions, recent studies on melting/freezing behavior of water confined in these host matrices are reviewed. While differential scanning calorimetry (DSC) reveals a linear relationship between melting point depression and pore size (independent of the pore shape), as predicted by the Gibbs-Thomson relation, variable temperature 2 H wide-line nuclear magnetic resonance (NMR) spectroscopy studies confirm the core-shell model of water and give evidence for a layer-by-layer freezing mechanism, which gives rise to an apparent fragile-to-strong transition in the solidification dynamics. In contrast to the freezing/melting behavior of water, the effect of nanoconfinement on the glass transition of supercooled liquids is nonuniversal and the glass transition temperature T g can either increase or decrease with the dimensionality and extent of confinement. This nonuniversal behavior is exemplified by the two glass-forming molecular liquids, glycerol and ortho-terphenyl (OTP). While glycerol shows an increase in T g and a pronounced slowdown of the rotational dynamics of the constituent molecules due to a change in the molecular packing between the bulk and the confined liquid, OTP displays a linear and confining-media-dependent depression of T g with increased confinement that is strongly influenced by the pore-liquid interface characteristics. This Account concludes with a focus on recent experimental evidence of extreme spatial and dynamical heterogeneity in both freezing and glass transition processes. This discovery was enabled by the unique mesoporous structures of SBA-16 and FDU-5, possessing bimodal architectures with two interconnected pore types of different size and shape (spherical and cylindrical). For the very first time, two melting points for water and two glass transitions for supercooled OTP, corresponding to a specific pore type, were observed. Collectively, these observations strongly suggest a close mechanistic connection between the local fluctuations in the structure and dynamics of nanoconfined liquids. Finally, while the findings reviewed in this Account provide new insights into thermodynamic and kinetic transitions of fluids, there remain many unanswered questions regarding the effects of nanoconfinement on the fundamental properties of fluids, which offer exciting future opportunities in chemical research.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct Observation by Rapid-Scan FT-IR Spectroscopy of Two-Electron-Reduced Intermediate of Tetraaza Catalyst [Co II N 4 H(MeCN)] 2+ Converting CO 2 to CO

In the search for the two-electron-reduced intermediate of the tetraaza catalyst [Co II N 4 H(MeCN)] 2+ (N 4 H = 2,12-dimethyl-3,7,11,17-tetraazabicyclo[11.3.1]heptadeca-1(17),2,11,13,15-pentaene) for CO 2 reduction and elementary steps that result in the formation of CO product, rapid-scan FT-IR spectroscopy of the visible-light-sensitized catalysis, using Ir(ppy) 3 in wet acetonitrile (CD 3 CN) solution, led to the observation of two sequential intermediates. The initially formed one-electron-reduced [Co I N 4 H] + --CO 2 adduct was converted by the second electron to a transient [Co I N 4 H] + --CO 2 - complex that spontaneously converted CO 2 to CO in a rate-limiting step on the second time scale in the dark under regeneration of the catalyst (room temperature). The macrocycle IR spectra of the [Co I N 4 H] + --CO 2 - complex and the preceding one-electron [Co I N 4 H] + --CO 2 intermediate show close similarity but distinct differences in the carboxylate modes, indicating that the second electron resides mainly on the CO 2 ligand. Vibrational assignments are corroborated by 13 C isotopic labeling. The structure and stability of the two-electron-reduced intermediate derived from the time-resolved IR study are in good agreement with recent predictions by DFT electronic structure calculations. This is the first observation of an intermediate of a molecular catalyst for CO 2 reduction during the bond-breaking step producing CO. The reaction pathway for the Co tetraaza catalyst uncovered here suggests that the competition between CO 2 reduction and proton reduction of a macrocyclic multi-electron catalyst is steered toward CO 2 activation if the second electron is directly captured by an adduct of CO 2 and the one-electron-reduced catalyst intermediate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Beam Energy Dependence of Triton Production and Yield Ratio $N_t \times N_p / N^2_d$ in Au+Au Collisions at RHIC

We report the triton (t) production in midrapidity (|y| < 0.5) Au + Au collisions at $\sqrt{s_{NN}} = 7.7-200$ GeV measured by the STAR experiment from the first phase of the beam energy scan at the Relativistic Heavy Ion Collider. The nuclear compound yield ratio ($N_t \times N_p / N^2_d$), which is predicted to be sensitive to the fluctuation of local neutron density, is observed to decrease monotonically with increasing charged-particle multiplicity ($dN_{ch}/dη$) and follows a scaling behavior. The $dN_{ch}/dη$ dependence of the yield ratio is compared to calculations from coalescence and thermal models. Enhancements in the yield ratios relative to the coalescence baseline are observed in the 0%-10% most central collisions at 19.6 and 27 GeV, with a significance of 2.3σ and 3.4σ, respectively, giving a combined significance of 4.1σ. The enhancements are not observed in peripheral collisions or model calculations without critical fluctuation, and decreases with a smaller $p_T$ acceptance. The physics implications of these results on the QCD phase structure and the production mechanism of light nuclei in heavy-ion collisions are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

MOCVD Growth and Characterization of Wide Bandgap ZnGeN 2 Thin Films

ZnGeN 2 is a wide bandgap material having less than 0.1% lattice mismatch with GaN and bandgap within few percent of that of GaN. Based on the first principle calculations, the valence band of ZnGeN 2 is situated ~1.4 eV above that of GaN at the heterointerface. Such a staggered band alignment between two closely lattice matched materials has already been demonstrated promising for novel optoelectronic device designs, for example, high efficiency blue and green light emitting diodes. However, the research on ZnGeN 2 is yet to pass the inceptive period. We report on the growth of single crystalline ZnGeN 2 films using metalorganic chemical vapor deposition and investigation on the crystalline, optical, electrical properties. Diethylzinc (DEZn), germane (GeH 4 ) and ammonia were used as the precursors for Zn, Ge and N, respectively. Films were grown on GaN and sapphire substrates. The Zn/Ge atomic ratio in the films determined from energy dispersive X-ray spectroscopy was found to decrease with increase in growth temperature but to increase with increase in pressure and DEZn/GeH 4 molar flow rate ratio. The X-ray diffraction (XRD) 2θ-ω spectra of the single crystalline ZnGeN 2 films resembled those of orthorhombic (perfectly ordered cations) or distorted wurtzite (disordered cations) polymorphs. High resolution scanning transmission electron microscopy imaging was used to further investigate the crystalline quality and crystalline structure of the films. The single crystalline films on c-sapphire or GaN substrates were found to have planar surface from scanning electron micrographs while those on r-sapphire substrate had stepped surface. No near band edge peak but a broad peak at ~2.05 eV was observed in the photoluminescence (PL) spectra, which was attributed to the transitions involving deep level defects. The PL excitation spectra peaked around 3.4 eV, which is due to the enhanced absorption of photons having energy close to the band gap. The as grown films were found to be n-type with 10 18 – 10 19 cm -3 carrier densities and mobility up to 17 cm 2 /V·s. In the end, the advancement made in this work regarding the growth of ZnGeN 2 thin films is a footstep towards the understanding of the material itself and in turn, towards the implementation of ZnGeN 2 based novel device designs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Twisting integrin receptors increases endothelin-1 gene expression in endothelial cells

A magnetic twisting stimulator was developed based on the previously published technique of magnetic twisting cytometry. Using ligand-coated ferromagnetic microbeads, this device can apply mechanical stresses with varying amplitudes, duration, frequencies, and waveforms to specific cell surface receptors. Biochemical and biological responses of the cells to the mechanical stimulation can be assayed. Twisting integrin receptors with RGD (Arg-Gly-Asp)-containing peptide-coated beads increased endothelin-1 (ET-1) gene expression by >100%. In contrast, twisting scavenger receptors with acetylated low-density lipoprotein-coated beads or twisting HLA antigen with anti-HLA antibody-coated beads did not lead to alterations in ET-1 gene expression. In situ hybridization showed that the increase in ET-1 mRNA was localized in the cells that were stressed with the RGD-coated beads. Blocking stretch-activated ion channels with gadolinium, chelating Ca2+ with EGTA, or inhibiting tyrosine phosphorylation with genistein abolished twist-induced ET-1 mRNA elevation. Abolishing cytoskeletal tension with an inhibitor of the myosin ATPase, with an inhibitor of myosin light chain kinase, or with an actin microfilament disrupter blocked twisted-induced increases in ET-1 expression. Our results are consistent with the hypothesis that the molecular structural linkage of integrin-cytoskeleton is an important pathway for stress-induced ET-1 gene expression.

Non-NASA Center↗

Quantifying vegetation and canopy structural complexity from terrestrial LiDAR data using the FORESTR R package

Terrestrial LiDAR (light detection and ranging) technologies have created new means of quantifying forest canopy structure, allowing not only the estimation of biomass, but also descriptions of the position and variability in canopy elements in space. Such measures provide novel structural information broadly useful to ecologists. There is a growing need for both a detailed taxonomy of forest canopy structural complexity (CSC) and open, transparent, and flexible tools to quantify complexity in ways that will advance foundational ecological knowledge of structure-function relationships. The CSC taxonomy we present groups structural descriptors into five categories: leaf area and density, canopy height, canopy arrangement, canopy openness, and canopy variability. This paper also introduces the r package forestr, the first open-source r package for the calculation of CSC metrics from terrestrial LiDAR data. The r package forestr is an analysis toolbox that works with portable canopy LiDAR (PCL) data and other pixelated/voxelized point clouds derived from terrestrial LiDAR scanning (TLS) data to calculate CSC metrics of interest to ecologists, modellers, forest managers, and remote sensing scientists.

52 ecosystem↗

Effect of Al and Cr Content on Air and Steam Oxidation of FeCrAl Alloys and Commercial APMT Alloy

To develop the next generation of accident-tolerant fuel cladding for light-water nuclear reactors, wrought FeCrAlY alloys with varying amounts of Cr and Al and commercial Kanthal APMT alloy were evaluated for short-term (4 h) oxidation resistance in steam and air at 1200–1475 °C. Model alloys with lower Cr contents and higher Al contents were evaluated in this paper as lower Cr contents are desirable for radiation damage resistance during operation. As expected, a synergistic effect was found between the Cr and Al contents to enable protective Al 2 O 3 formation under these conditions. Characterization of the alumina scales formed in steam found that the scale morphology was affected by the alloy Y content and detailed scanning transmission electron microscopy (STEM) detected Y segregation along scale grain boundaries at 1200 °C. However, after 4 h at 1475 °C, Y and Hf were not segregated to the oxide grain boundaries formed on APMT and the scale had a single layer structure. Finally, compared to oxidation in air, STEM characterization of the outer scale showed differences in the Fe and Cr distributions in steam.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface-screening mechanisms in ferroelectric thin films and their effect on polarization dynamics and domain structures

For over 70 years, ferroelectric materials have been one of the central research topics for condensed matter physics and material science, an interest driven both by fundamental science and applications. However, ferroelectric surfaces, the key component of ferroelectric films and nanostructures, still present a significant theoretical and even conceptual challenge. Indeed, stability of ferroelectric phase per se necessitates screening of polarization charge. At surfaces, this can lead to coupling between ferroelectric and semiconducting properties of material, or with surface (electro) chemistry, going well beyond classical models applicable for ferroelectric interfaces. In this paper, we summarize recent studies of surface-screening phenomena in ferroelectrics. We provide a brief overview of the historical understanding of the physics of ferroelectric surfaces, and existing theoretical models that both introduce screening mechanisms and explore the relationship between screening and relevant aspects of ferroelectric functionalities starting from phase stability itself. Given that the majority of ferroelectrics exist in multiple-domain states, we focus on local studies of screening phenomena using scanning probe microscopy techniques. We discuss recent studies of static and dynamic phenomena on ferroelectric surfaces, as well as phenomena observed under lateral transport, light, chemical, and pressure stimuli. Finally, we also note that the need for ionic screening renders polarization switching a coupled physical–electrochemical process and discuss the non-trivial phenomena such as chaotic behavior during domain switching that stem from this.

36 MATERIALS SCIENCE↗

Effect of nano particle sizes on the third-order optical non-linearities and nanostructure of copolymer P3HT:PCBM thin film for organic photovoltaics

Highlights: • Active layer (P3HT:PCBM) has been deposited on substrate type by spin coating at 1000 rpm. • The device was completed by evaporating a 60 nm thick, circular gold electrodes onto the P3HT:PCBM. • Nonlinear refractive indices of the three particle sizes are found to be of the order of 10{sup −7} cm{sup 2}/W - Abstract: Organic solar cells are based on (3-hexylthiophene):[6,6]-phenyl C61-butyric acid with methyl ester Bulk Heterojunction. An inverted structure has been fabricated using nano-anatase crystalline titanium dioxide, as the electron transport layer, which was prepared on either the Indium Tin Oxide coated glass (ITO—glass), or Silicon wafer, as well as on glass substrates by the sol–gel method, at different spin speed, using the spin-coating system. The effect of thickness on the surface morphology and on the optical properties of TiO{sub 2} layer, was investigated using the Atomic Force Microscopy (AFM), X-ray diffraction, and UV–visible spectrophotometer. The samples were examined to feature currents and voltages, in the darkness and light extraction efficiency of the solar cell. The highest open-circuit voltage, V{sub oc}, and power conversion efficiency were 0.66% and 0.39%, fabricated with 90 nm, respectively. The non-linear optical properties of nano-anatase TiO{sub 2} sol–gel, were investigated at different particle sizes, using the z-scan technique.

36 MATERIALS SCIENCE↗

Temperature Dependent Raman Spectroscopic Study of the Fe Doped La{sub 0.67}Sr{sub 0.33}MnO{sub 3} Prepared Using Ball Milling Method

Polycrystalline samples of La{sub 0.67}Sr{sub 0.33}Mn{sub 0.65}Fe{sub 0.35}O{sub 3} (LSMFO) were synthesized using the standard ball mill method with different calcination temperatures ranging from 800 to 1100°C for 7 h. The phase purity of these samples was confirmed using X-ray diffraction (XRD) patterns. All samples were found to have rhombohedral crystal structure with R 3-bar c space group. The lattice parameters, cell volume, bond angle and bond length have been obtained using the Rietveld refinement by FullProf software. The average crystallite size calculated using the Debye-Scherrer formula was found between 27 and 60 nm. Surface morphology of the prepared samples has been examined using a scanning electron microscope (SEM). SEM images show the formation of well-arranged grain sizes distributed from 240 to 400 nm, much larger than one estimated using the Scherrer formula. All tiny particles are highly agglomerated with the increasing temperature and porosity decreases with increasing temperature. An analysis of the frequency and peak broadening of Raman modes as a function of temperature clearly shows the significant temperature effect on the A{sub 1g} and E{sub g} modes of LSMFO. The shifts and broadening of the A{sub 1g} and E{sub g} modes are discussed in light of the oxygen sublattice distortion. Our study shows the reduction in distortion with increasing calcination temperature, which suggests a decrease in the JT effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An Acoustic Charge Transport Imager for High Definition Television

This project, over its term, included funding to a variety of companies and organizations. In addition to Georgia Tech these included Florida Atlantic University with Dr. William E. Glenn as the P.I., Kodak with Mr. Mike Richardson as the P.I. and M.I.T./Polaroid with Dr. Richard Solomon as the P.I. The focus of the work conducted by these organizations was the development of camera hardware for High Definition Television (HDTV). The focus of the research at Georgia Tech was the development of new semiconductor technology to achieve a next generation solid state imager chip that would operate at a high frame rate (I 70 frames per second), operate at low light levels (via the use of avalanche photodiodes as the detector element) and contain 2 million pixels. The actual cost required to create this new semiconductor technology was probably at least 5 or 6 times the investment made under this program and hence we fell short of achieving this rather grand goal. We did, however, produce a number of spin-off technologies as a result of our efforts. These include, among others, improved avalanche photodiode structures, significant advancement of the state of understanding of ZnO/GaAs structures and significant contributions to the analysis of general GaAs semiconductor devices and the design of Surface Acoustic Wave resonator filters for wireless communication. More of these will be described in the report. The work conducted at the partner sites resulted in the development of 4 prototype HDTV cameras. The HDTV camera developed by Kodak uses the Kodak KAI-2091M high- definition monochrome image sensor. This progressively-scanned charge-coupled device (CCD) can operate at video frame rates and has 9 gm square pixels. The photosensitive area has a 16:9 aspect ratio and is consistent with the "Common Image Format" (CIF). It features an active image area of 1928 horizontal by 1084 vertical pixels and has a 55% fill factor. The camera is designed to operate in continuous mode with an output data rate of 5MHz, which gives a maximum frame rate of 4 frames per second. The MIT/Polaroid group developed two cameras under this program. The cameras have effectively four times the current video spatial resolution and at 60 frames per second are double the normal video frame rate.

Hunt, William D.↗

Soil Moisture Active and Passive (SMAP) White-Painted Expanded Polystyrene (EPS) Radome Survivability Test

NASA's SMAP Mission launched in January 2015 into a 685 km near-polar, sun-synchronous orbit. The SMAP instrument architecture incorporates an L-band radar and radiometer which share a common feedhorn and mesh reflector. The instrument rotates about the nadir axis at approximately 15 rpm, thereby providing a conically scanning wide swath antenna beam that is capable of achieving global coverage within three days. The radiometer and its associated electronics have tight thermal stability requirements in order to meet the required surface emittance measurement precision from space. Maintaining the thermal stabilities is quite challenging because the radiometer is located on a spinning platform that can either be in full sunlight or eclipse, and thus exposed to a highly transient environment. Stability requirements were met by integrating a light-weight Expanded Polystyrene (EPS) radome into the design to prevent solar illumination of the feed horn interior. The radome was painted white since the thermo-optical properties of bare sunlit EPS degrade rapidly over the three-year mission. Milling of the EPS and solvent within the white paint created cavities on the EPS surface which may introduce localized hot spots possibly violating the EPS glass transition temperature of 96degC and leading to structural integrity concerns. A three-day thermal test was conducted in a vacuum chamber to verify survivability of the radome during a simulated non-spin fault condition at end of mission. A portable solar simulator illuminated the test article and the beam irradiance was kept nearly constant during the entire 50 hour test, except during the first hour which simulated the expected 79degC on-orbit surface temperature of the radome. The test article survived based on the established pass criteria for three separate metrics: dimensional, optical property, and color. If any hot spots exist locally, they did not cause any observable permanent deformation when compared to pre- and post-test images. The test results increase confidence that there is a high probability that the radome will survive the worst-case scenario of a no-spin fault condition at the end of mission.

Mikhaylov, Rebecca↗