Search NASA⌕ Search

SEARCH · Search NASA

Results for “Systems Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

The response of the Amazon ecosystem to the photosynthetically active radiation fields: integrating impacts of biomass burning aerosol and clouds in the NASA GEOS Earth system model

The Amazon experiences fires every year, and the resulting biomass burning aerosols, together with cloud particles, influence the penetration of sunlight through the atmosphere, increasing the ratio of diffuse to direct photosynthetically active radiation (PAR) reaching the vegetation canopy and thereby potentially increasing ecosystem productivity. In this study, we use the NASA Goddard Earth Observing System (GEOS) model with coupled aerosol, cloud, radiation, and ecosystem modules to investigate the impact of Amazon biomass burning aerosols on ecosystem productivity, as well as the role of the Amazon's clouds in tempering this impact. The study focuses on a 7-year period (2010–2016) during which the Amazon experienced a variety of dynamic environments (e.g., La Niña, normal years, and El Niño). The direct radiative impact of biomass burning aerosols on ecosystem productivity – called here the aerosol diffuse radiation fertilization effect – is found to increase Amazonian gross primary production (GPP) by 2.6 % via a 3.8 % increase in diffuse PAR (DFPAR) despite a 5.4 % decrease in direct PAR (DRPAR) on multiyear average during burning seasons. On a monthly basis, this increase in GPP can be as large as 9.9 % (occurring in August 2010). Consequently, the net primary production (NPP) in the Amazon is increased by 1.5 %, or ~92 Tg C yr -1 – equivalent to ~37 % of the average carbon lost due to Amazon fires over the 7 years considered. Clouds, however, strongly regulate the effectiveness of the aerosol diffuse radiation fertilization effect. The efficiency of this fertilization effect is the highest in cloud-free conditions and linearly decreases with increasing cloud amount until the cloud fraction reaches ~0.8, at which point the aerosol-influenced light changes from being a stimulator to an inhibitor of plant growth. Nevertheless, interannual changes in the overall strength of the aerosol diffuse radiation fertilization effect are primarily controlled by the large interannual changes in biomass burning aerosols rather than by changes in cloudiness during the studied period.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Criticality Accident Alarm System Modeling for the Uranium Processing Facility

The Criticality Accident Alarm System (CAAS) for the Uranium Processing Facility (UPF) provides coverage for two primary processing facilities. For UPF, detailed documentation and drawings of the design are readily available. While this design information allows for some CAAS modeling features to match the actual design with a high level of accuracy, assumptions and simplifications are necessary as it is unrealistic and unnecessary to replicate many aspects of the design. A set of modeling guidelines and techniques were used to develop consistency between the MCNP6 models. While ensuring conservatism, overly conservative choices must be avoided to demonstrate the minimum accident of concern can be detected. To ensure proper modeling choices were made for the final models, a group of parametric studies were performed to evaluate the impact on the dose rates detected at the individual detectors. Some of these modeling choices and/or associated parametric studies include: - Modeling the grid steel area above the detectors as homogeneous stainless steel and determining the impact on detectability with an increasing density. - Modeling the presence of equipment in close proximity to the CAAS detectors. - Determining an appropriate material density to represent miscellaneous items not specifically modeled. - Evaluating the impact of sprinkler activation. The results of UPF CAAS analyses show that the modeling assumptions made based on the detailed design and parametric studies are appropriate and demonstrate accurate yet conservative models have been developed for detecting minimum accident of concern within the UPF.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2016

Final Report Collaborative Project: Improving the Representation of Coastal and Estuarine Processes in Earth System Models

This project aimed to improve long term global climate simulations by resolving and enhancing the representation of the processes involved in the cycling of freshwater through estuaries and coastal regions. This was a collaborative multi-institution project consisting of physical oceanographers, climate model developers, and computational scientists. It specifically targeted the DOE objectives of advancing simulation and predictive capability of climate models through improvements in resolution and physical process representation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Generic Disposal System Model for Granite: Potential Application to Joint Fuel Cycles Studies

The following is intended as a possible approach to support Phase 1 Task 1 of the Joint Fuel Cycles Studies collaboration between the Republic of Korea (ROK) and the US DOE Nuclear Energy Used Fuel Disposition Campaign (UFDC). In this approach UFDC is providing ROK with a brief description of our simplified granite generic disposal system (GDS) model, as it has been implemented in our Generic Performance Assessment Model (GPAM). A more detailed description of the original, stand alone, granite GDS model and GPAM appears in the UFD FY 11 report (Clayton, et. al., 2011), which was provide as an attachment to an earlier email to Task 1 ROK counterparts. Additionally, UFDC is providing the input data sets (parameter, values, descriptions and uncertainty) used to implement the stand alone granite GDS model into GPAM, as a starting point.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Renewable Thermal Energy Systems: Modeling Developments and Future Directions (Report 3)

Increasing global energy consumption, increasing population, expansion of all types of produced goods and food, and the climate crisis have necessitated increasing the share of renewable heat in industry, which is vital for both decarbonization. The aim of this work is to evaluate current and prospective renewable heat technologies in stand-alone and hybrid configurations, together with their technical capabilities, performance, and cost. Renewable thermal energy systems (RTES) for buildings and industrial applications have been investigated using techno-economic analysis to determine their potential economic and environmental impacts.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2019

M3 Wave System Modeling: Cooperative Research and Development Final Report, CRADA Number CRD-17-697

M3 Wave is a leader in submerged pressure differential wave energy harvesting technology. M3 Wave's approach to developing technology is focused on simplicity and survivability. The company has been working on wave energy devices since 1991 and has produced a number of successes during that time. During testing as part of DOE's Wave Prize finals, M3 Wave encountered an unexpected phenomenon that increased power production by over 25% in their NEXUS system. The problem to be explored by this project is how to accurately model and characterize this phenomenon to better take advantage of the potential benefits. This will be accomplished by: 1) developing and validating a system-hydrodynamics model of M3 Wave's NEXUS system; 2) performing a parameter study to identify possible mechanisms for improved energy capture, and 3) providing M3 Wave with a working, adaptable, model of their system, such that M3 Wave is able to incorporate the study's findings and optimize their system for improved LCOE.

16 TIDAL AND WAVE POWER↗
DOE OSTI2022

Improving the particle dry deposition scheme in the CMAQ photochemical modeling system

Dry deposition of atmospheric aerosols in large-scale models is a critical, but highly uncertain, sink process with a strong dependence on particle size, meteorological conditions, and land surface properties. This study investigates the particle dry deposition scheme implemented in the standard Community Multiscale Air Quality (CMAQ) model v5.2.1, characterizes its underlying parameterized components with comparison to a similar scheme in a contemporary regional-scale model, and proposes two updated schemes that are then evaluated with available ambient particle deposition velocity (V d ) measurements. Both updated schemes reduce the surprisingly strong dependence of deposition velocity on the aerosol mode width, with one scheme further introducing a dependence on vegetation coverage that is broadly consistent with variability in observations between vegetated and non-vegetated surfaces. Compared to the base scheme, the updated scheme with vegetation dependence increases V d for submicron particles and decreases it for larger particles by an average of 37% and –66%, respectively. This scheme performs statistically better than the base scheme, reducing fractional biases by 56%–97% for vegetated land-use types and has roughly equivalent performance over water. The base and updated schemes are tested with three annual CMAQ (v5.2.1) simulations for the year 2011; predicted ambient aerosol concentrations are evaluated with routine monitoring network observations and predicted dry deposition fluxes are evaluated with data from the Clean Air Status and Trends Network (CASTNET). The updated scheme with vegetation dependence reduces negative fractional biases for PM 10 by 41% and positive fractional biases for PM 2.5 organic carbon by 15%. This scheme has been incorporated into the most recent publicly accessible versions of CMAQ (v5.3 and beyond) to replace the scheme used in previous versions of CMAQ (v4.5 through v5.2.1).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Synthesis of Ni-Rich Thin-Film Cathode as Model System for Lithium Ion Batteries

We demonstrate a process to prepare model electrodes of the Ni-rich layered compound LiNi 0.6 Mn 0.2 Co 0.2 O 2 . These thin-film cathodes are compared with the composite materials to demonstrate the system is a viable platform for isolating interfacial phenomena between the electrolyte and active material without the influence of binders and conductive additives. The appropriate choice of heterolayers was found to influence the preferential orientation of the (101) and (104) planes relative to the (003) plane of the layered R-3m crystal structure, enhancing Li + diffusion and improving electrochemical performance. The addition of a Co interlayer between the Pt current collecting layer and alumina substrate increased the (101) and (104) texturing of the 500 nm Ni-rich film and allowed cells to deliver greater than 50% of their theoretical capacity. This work provides an architecture for isolating complex mechanisms of active materials that suffer from surface reconstruction and degradation in electrochemical cells.

25 ENERGY STORAGE↗
DOE OSTI2018

Detection of Single Quantum Dots in Model Systems with Sheet Illumination Microscopy

Single molecule detection and tracking provides at times the only possible method to observe the interactions of low numbers of biomolecules, inlcuding DNA, receptors and signal mediating proteins in living systems. However, most existing imaging methods do not enable both high sensitivity and non-invasive imaging of large specimens. In this study we report a new setup for selective plane illumination microscopy (SPIM), which enables fast imaging and single molecule tracking with the resolution of confocal microscopy and the optical penetration beyond 300 μm. We detect and report our instrumental figures of merit, control values of fluorescence properties of single nano crystals in comparison to both standard widefield configurations, and also values of nanocrystals in multicellular “fruiting bodies” of Dictyostelium, an excellent control as a model developmental system. In the Dictyostelium , we also report some of our first tracking of single nanocrystals with SPIM. The new SPIM setup represents a new technique, which enables fast single molecule imaging and tracking in living systems.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2017

Percolation of binary disk systems: Modeling and theory

The dispersion and connectivity of particles with a high degree of polydispersity is relevant to problems involving composite material properties and reaction decomposition prediction and has been the subject of much study in the literature. This paper utilizes Monte Carlo models to predict percolation thresholds for a two-dimensional systems containing disks of two different radii. Monte Carlo simulations and spanning probability are used to extend prior models into regions of higher polydispersity than those previously considered. A correlation to predict the percolation threshold for binary disk systems is proposed based on the extended dataset presented in this work and compared to previously published correlations. Finally, a set of boundary conditions necessary for a good fit is presented, and a condition for maximizing percolation threshold for binary disk systems is suggested.

36 MATERIALS SCIENCE↗
DOE OSTI2018

A novel Variable Refrigerant Flow (VRF) heat recovery system model: Development and validation

As one of the latest emerging HVAC technologies, the Variable Refrigerant Flow (VRF) system with heat recovery (HR) configurations has obtained extensive attention from both the academia and industry. Compared with the conventional VRF systems with heat pump (HP) configurations, VRF-HR is capable of recovering heat from cooling zones to heating zones and providing simultaneous cooling and heating operations. Moreover, this could lead to substantial energy saving potential and more flexible zonal control. In this paper, a novel model is developed to simulate the energy performance of VRF-HR systems. It adheres to a more physics-based development with the ability to simulate the refrigerant loop performance and consider the dynamics of more operational parameters, which is crucial for representing more advanced control logics. Another key feature of the model is the introduction of component-level curves for indoor units and outdoor units instead of overall performance curves for the entire system, and thus it requires much fewer user-specified performance curves as model inputs. The validation study reflects good agreements between the simulated energy use from the new VRF-HR model and the laboratory measurement data across all operational modes at sub-hourly time steps. The model has been adopted in the official release of the EnergyPlus simulation program since Version 8.6, which enables more accurate and robust assessments of VRF-HR systems to support their applications in energy retrofit of existing buildings or design of zero-net-energy buildings.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2012

Application of Spatial Data Modeling Systems, Geographical Information Systems (GIS), and Transportation Routing Optimization Methods for Evaluating Integrated Deployment of Interim Spent Fuel Storage Installations and Advanced Nuclear Plants

The objective of this siting study work is to support DOE in evaluating integrated advanced nuclear plant and ISFSI deployment options in the future. This study looks at several nuclear power plant growth scenarios that consider the locations of existing and planned commercial nuclear power plants integrated with the establishment of consolidated interim spent fuel storage installations (ISFSIs). This research project is aimed at providing methodologies, information, and insights that inform the process for determining and optimizing candidate areas for new advanced nuclear power generation plants and consolidated ISFSIs to meet projected US electric power demands for the future.

Geographical Information Systems (GIS)↗
DOE OSTI2015

Graph modeling systems and methods

An apparatus and a method for vulnerability and reliability modeling are provided. The method generally includes constructing a graph model of a physical network using a computer, the graph model including a plurality of terminating vertices to represent nodes in the physical network, a plurality of edges to represent transmission paths in the physical network, and a non-terminating vertex to represent a non-nodal vulnerability along a transmission path in the physical network. The method additionally includes evaluating the vulnerability and reliability of the physical network using the constructed graph model, wherein the vulnerability and reliability evaluation includes a determination of whether each terminating and non-terminating vertex represents a critical point of failure. The method can be utilized to evaluate wide variety of networks, including power grid infrastructures, communication network topologies, and fluid distribution systems.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Generalized Quasi-Static Mooring System Modeling with Analytic Jacobians

This paper presents a generalized and efficient method for quasi-static analysis of mooring systems, including complex scenarios such as when shared mooring lines interconnect multiple floating wind or wave energy devices. While quasi-static mooring models are well established, most published formulations are focused on specific applications, and no publicly available implementations provide efficient handling of large mooring system networks. The present formulation addresses these gaps by: (1) formulating solutions for edge cases not typically supported by quasi-static models; (2) creating a fully generalized model structure such that any combination of mooring lines, point masses, and floating bodies can be assembled; and (3) deriving analytic expressions for the system Jacobians (stiffness matrices) so that systems with many degrees of freedom can be solved efficiently. These techniques form the theory basis of MoorPy, an open-source mooring analysis library. The model is demonstrated on nine scenarios of increasing complexity with features of interest for offshore renewable energy applications. When compared with steady-state results from a lumped-mass dynamic model, the results show that the quasi-static formulation accurately calculates profiles and tensions and that its analytic approach provides more efficient and reliable computation of system stiffness matrices than finite-differencing methods. These results verify the accuracy of the MoorPy model.

16 TIDAL AND WAVE POWER↗
DOE OSTI2021

Multiscale System Modeling of Single-Event-Induced Faults in Advanced Node Processors

Integration-technology feature shrink increases computing-system susceptibility to single-event effects (SEE). While modeling SEE faults will be critical, an integrated processor’s scope makes physically correct modeling computationally intractable. Without useful models, presilicon evaluation of fault-tolerance approaches becomes impossible. To incorporate accurate transistor-level effects at a system scope, we present a multiscale simulation framework. Charge collection at the 1) device level determines 2) circuit-level transient duration and state-upset likelihood. Circuit effects, in turn, impact 3) register-transfer-level architecture-state corruption visible at 4) the system level. Furthermore, the physically accurate effects of SEEs in large-scale systems, executed on a high-performance computing (HPC) simulator, could be used to drive cross-layer radiation hardening by design. We demonstrate the capabilities of this model with two case studies. First, we determine a D flip-flop’s sensitivity at the transistor level on 14-nm FinFet technology, validating the model against published cross sections. Second, we track and estimate faults in a microprocessor without interlocked pipelined stages (MIPS) processor for Adams 90% worst case environment in an isotropic space environment.

42 ENGINEERING↗
DOE OSTI2020

Battery models, systems, and methods using robust fail-safe iteration free approach for solving differential algebraic equations

Battery models using robust fail-safe iteration free approach for solving Differential Algebraic Equations, and associated systems and methods are disclosed. In one embodiment, a method includes generating a model of the rechargeable battery; determining one or more initial conditions for one or more algebraic variables of the model using a solver; holding differential variables of the model static by a switch function while determining the one or more initial conditions; applying the initial conditions to the model by the switch function; and determining one or more parameters for the rechargeable battery by solving the algebraic and differential equations.

25 ENERGY STORAGE↗