SEARCH · Search NASA

Results for “Telemetry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

All sources NASA NTRS DOE OSTI

NASA NTRS1990

Telemetry and command standards

The first phase of the international Consultative Committee for Space Data Systems (CCSDS) efforts toward the definition of standards for space telemetry, spacecraft tracking, and command functions has established a set of standard space communications techniques capable of satisfying almost the entire spectrum of space mission user requirements. This was achieved by focusing on the distinctive problems associated with the space/ground data link, and developing the infrastructural system designated the 'Open Systems Interconnection'. The intrinsically international coordination by CCSDS of development efforts ensures highly flexible mutual support activities by the various national space agencies.

Hooke, Adrian J.↗

NASA NTRS1989

Remote, PCM-controlled, multi-channel radio frequency FM telemetry system for cryogenic wind tunnel application

A telemetry system used in the NASA-Langley cryogenic transonic wind tunnel to obtain rotational strain and temperature data is described. The system consists of four FM transmitters allowing for a remotely controlled PCM combination. A rotating four-contact mercury slip-ring is used as an interface between the fixed and rotating mechnical structures. Over 60 channels of data on the main fan disk and blade structures have been obtained. These data are studied to verify computer predictions and mechanical life. A series of block diagrams are included.

Diamond, John K.↗

NASA NTRS1991

Space telemetry degradation due to Manchester data asymmetry induced carrier tracking phase error

The deleterious effects that the Manchester (or Bi-phi) data asymmetry has on the performance of phase-modulated residual carrier communication systems are analyzed. Expressions for the power spectral density of an asymmetric Manchester data stream, the interference-to-carrier signal power ratio (I/C), and the error probability performance are derived. Since data asymmetry can cause undesired spectral components at the carrier frequency, the I/C ratio is given as a function of both the data asymmetry and the telemetry modulation index. Also presented are the data asymmetry and asymmetry-induced carrier tracking loop and the system bit-error rate to various parameters of the models.

Nguyen, Tien M.↗

NASA NTRS1992

Period Modulation For Telemetry

In innovative telemetry scheme, time between pulses of light transmitted along optical fiber represents measured quantity. In period modulator, time varied by varying control-input voltage, which serves as critical voltage of relaxation oscillator. Demodulator is simple state estimator, no discriminator or phase-locked loop needed. Applicable to radio or wire transmission. Pulses proportional to temperature, pressure, voltage, or other variable monitored remotely.

Kirkham, Harold↗

NASA NTRS1991

The impact of NRZ data asymmetry on the performance of a space telemetry system

The author derives an expression for the power spectral density of an asymmetric nonreturn-to-zero (NRZ) data stream. This formula is used to investigate how the data bandwidth varies with data asymmetry. The threshold levels of undesired spectral components that fall into the carrier tracking loop bandwidth are determined by examining the derived spectral density. Based on this formula, a simple technique is developed for the computation of bit signal-to-noise ratio (SNR) degradation due to data asymmetry. The telemetry bit SNR degradations derived using this technique are compared with the results obtained previously by Simon et al. (1978) and with measurements by the electronic systems test laboratory (ESTL) at the Johnson Space Center.

Nguyen, Tien M.↗

NASA NTRS1991

Design of a communications system for multiple telemetry data channels operating simultaneously with a coherent turn-around ranging channel

This paper presents a simple technique to design a phase-modulated residual carrier communications link for optimum performance. The emphasis is on two data channels which are operated simultaneously with a ranging signal. The data channels employ PCM/PM and PCM/PSK/PM modulation schemes for high and low data rate channels, respectively. The technique proposed here selects the optimum (1) subcarrier frequency to minimize the interference between the two data channels, and (2) modulation indices for optimum balance of power between the two telemetry data channels and the coherent turn around ranging channel. The selected set of optimum modulation indices will allow for the specified bit error rate (BER) degradations in the two data channels. Although this technique is proposed to optimize the performance degradation for two data channels, generalizations can be made for more than two data channels.

Nguyen, Tien M.↗

NASA NTRS1992

Retrieval of a wind profile from the Galileo Probe telemetry signal

The zonal wind speed profile within Jupiter's upper troposphere is to be estimated on the basis of its influence on the frequency of the Galileo Probe's telemetry signal; this is achieved by linearizing the relativistic Doppler shift equation about a state of zero wind speed, expanding the zonal wind series in a Legendre polynomial series, and reducing the resulting equations to a linear, least-squares problem. If the error sources have magnitudes not greater than those presently assumed, the retrieved wind speed profiles can place a key constraint on the basic drive for the atmospheric circulation, as well as anchoring winds derived from Galileo Orbiter images to well-defined vertical positions in the atmosphere.

Pollack, James B.↗

NASA NTRS1991

A precision transportable tracking telemetry system

New mission requirements and the main fetures of a new generation of tracking telemetry system designed to meet these requriements are discussed. The missions include launch vehicle support, sounding rocket mission support, and LEO satellite support, which often require support from remote sites with no existing tracking resources. To meet these requirements, the new system improves on the existing capabilities in three areas: improved RF performance, automation, and target positional accuracy. Initial results of system testing are presented. Without additional adjustment, the new system routinely falls within an absolute accuracy of +/-0.075 degrees, 3 sigma, and on most passes achieves +/-0.05 degrees, 3 sigma.

Morris, R. A.↗

NASA NTRS1993

Telemetry Tests Of The Advanced Receiver II

Report describes telemetry tests of Advanced Receiver II (ARX-II): digital radio receiving subsystem operating on intermediate-frequency output of another receiving subsystem called "multimission receiver" (MMR), detecting carrier, subcarrier, and data-symbol signals transmitted by spacecraft, and extracts Doppler information from signals. Analysis of data shows performance of MMR/ARX-II system comparable and sometimes superior to performances of Blk-III/BPA and Blk-III/SDA/SSA systems.

Hinedi, Sami M.↗

NASA NTRS1993

Compact, Flexible Telemetry-Coding Circuits

Circuits encoding binary telemetry data designed to synthesize any number of selectable codes. Designed for use aboard spacecraft, with features also making them attractive for terrestrial applications: Simple and compact relative to prior coding circuits, built with commercial integrated circuits, and incorporate protective redundancy. Output distortions minimized, and spurious attenuated and/or abbreviated output pulses eliminated.

Katz, Richard B.↗

NASA NTRS1993

Designing Two Telemetry Channels With A Ranging Channel

Method of optimization devised for use in selecting frequencies, powers, modulation indices, and other parameters of two digital-data telemetry channels and coherent turnaround ranging channel of Earth-station/satellite communication system. Also applicable to design of terrestrial communication systems based on similar modulation schemes and present similar design problems.

Nguyen, Tien M.↗

NASA NTRS1993

A functional description of the Buffered Telemetry Demodulator (BTD)

This article gives a functional description of the buffered telemetry demodulator (BTD), which operates on recorded digital samples to extract the symbols from the received signal. The key advantages of the BTD are as follows: (1) its ability to reprocess the signal to reduce acquisition time; (2) its ability to use future information about the signal and to perform smoothing on past samples; and (3) its minimum transmission bandwidth requirement as each sub carrier harmonic is processed individually. The first application of the BTD would be the Galileo S-band contingency mission, where the signal is so weak that reprocessing to reduce the acquisition time is crucial. Moreover, in the event of employing antenna arraying with full spectrum combining, only the sub carrier harmonics need to be transmitted between sites, resulting in significant reduction in data rate transmission requirements. Software implementation of the BTD is described for various general-purpose computers.

Tsou, H.↗

NASA NTRS1993

The EURECA telecommanding chain: Experience with packet telecommand and telemetry systems

The European Retrieval Carrier (EURECA) was launched on its first flight on the 31st July 1992 by the Space Shuttle Atlantis. EURECA is characterized by several new on-board features, most notable Packet Telemetry and a partial implementation of Packet Telecommanding using an early version of the Command Operation Procedure (COP-1) protocol. EURECA has also very low contact time with its Ground Station, with a consequent high number of out-of-visibility onboard operations. This paper concentrates on the implementation and operational experience with the COP-1 Protocol and the effect the short ground contact time has on the design of the Commanding System. Another interesting feature is that the COP-1 is implemented at the control center rather than at the ground station. The COP-1 protocol also successfully supported the mission during the launch where commands were sent via NASCOM and the Shuttle.

Mueller, C.↗

NASA NTRS1994

A distributed computing model for telemetry data processing

We present a new approach to distributing processed telemetry data among spacecraft flight controllers within the control centers at NASA's Johnson Space Center. This approach facilitates the development of application programs which integrate spacecraft-telemetered data and ground-based synthesized data, then distributes this information to flight controllers for analysis and decision-making. The new approach combines various distributed computing models into one hybrid distributed computing model. The model employs both client-server and peer-to-peer distributed computing models cooperating to provide users with information throughout a diverse operations environment. Specifically, it provides an attractive foundation upon which we are building critical real-time monitoring and control applications, while simultaneously lending itself to peripheral applications in playback operations, mission preparations, flight controller training, and program development and verification. We have realized the hybrid distributed computing model through an information sharing protocol. We shall describe the motivations that inspired us to create this protocol, along with a brief conceptual description of the distributed computing models it employs. We describe the protocol design in more detail, discussing many of the program design considerations and techniques we have adopted. Finally, we describe how this model is especially suitable for supporting the implementation of distributed expert system applications.

Barry, Matthew R.↗

NASA NTRS1994

ISTAR: Intelligent System for Telemetry Analysis in Real-time

The intelligent system for telemetry analysis in real-time (ISTAR) is an advanced vehicle monitoring environment incorporating expert systems, analysis tools, and on-line hypermedia documentation. The system was developed for the Air Force Space and Missile Systems Center (SMC) in Los Angeles, California, in support of the inertial upper stage (IUS) booster vehicle. Over a five year period the system progressed from rapid prototype to operational system. ISTAR has been used to support five IUS missions and countless mission simulations. There were a significant number of lessons learned with respect to integrating an expert system capability into an existing ground system.

Simmons, Charles↗

NASA NTRS1994

Table-driven configuration and formatting of telemetry data in the Deep Space Network

With a restructured software architecture for telemetry system control and data processing, the NASA/Deep Space Network (DSN) has substantially improved its ability to accommodate a wide variety of spacecraft in an era of 'better, faster, cheaper'. In the new architecture, the permanent software implements all capabilities needed by any system user, and text tables specify how these capabilities are to be used for each spacecraft. Most changes can now be made rapidly, outside of the traditional software development cycle. The system can be updated to support a new spacecraft through table changes rather than software changes, reducing the implementation, test, and delivery cycle for such a change from three months to three weeks. The mechanical separation of the text table files from the program software, with tables only loaded into memory when that mission is being supported, dramatically reduces the level of regression testing required. The format of each table is a different compromise between ease of human interpretation, efficiency of computer interpretation, and flexibility.

Manning, Evan↗

NASA NTRS1994

Applications of massively parallel computers in telemetry processing

Telemetry processing refers to the reconstruction of full resolution raw instrumentation data with artifacts, of space and ground recording and transmission, removed. Being the first processing phase of satellite data, this process is also referred to as level-zero processing. This study is aimed at investigating the use of massively parallel computing technology in providing level-zero processing to spaceflights that adhere to the recommendations of the Consultative Committee on Space Data Systems (CCSDS). The workload characteristics, of level-zero processing, are used to identify processing requirements in high-performance computing systems. An example of level-zero functions on a SIMD MPP, such as the MasPar, is discussed. The requirements in this paper are based in part on the Earth Observing System (EOS) Data and Operation System (EDOS).

El-Ghazawi, Tarek A.↗

NASA NTRS1994

Ground equipment for the support of packet telemetry and telecommand

This paper describes ground equipment for packet telemetry and telecommand which has been recently developed by industry for the European Space Agency. The architectural concept for this type of equipment is outlined and the actual implementation is presented. Focus is put on issues related to cross support and telescience as far as they affect the design of the interfaces to the users of the services provided by the equipment and to the management entities in charge of equipment control and monitoring.

Hell, Wolfgang↗