Search NASA⌕ Search

SEARCH · Search NASA

Results for “Texture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Irregular Mare Patches (IMPs): 100 Ma or 3 Ga?

IMPs exhibit a perplexing combination of characteristics that are consistent with either an approximately 100 Ma or 3 Ga formation. Dozens of small-area IMPs have crisp morphologies and crater size-frequency distributions (SFDs) that denote relatively recent geologic activity (less than 100 Ma); however, the apparently well-developed regolith on portions of the IMPs are in conflict with such a young age [1]. To test possible formation hypotheses (e.g., [1-5]), which range from ancient volcanism to contemporary outgassing, we examined IMP morphology at the meter-scale with LROC NAC images and derived elevation models. We focused on the largest IMPs (Ina, Sosigenes, Cauchy, Maskelyne, and Nubium), where contacts between deposits are best developed. Most of our observations are consistent with multiple generations of inflation and breakouts (or squeeze-ups) of basaltic lavas that were affected by local slopes. Some of the extrusions coalesced into larger mounds or filled pre-existing craters. We did not observe evidence of large-scale void space (e.g., fissures, fractures, linear depressions, or pits) within or beneath the mounds or rougher deposits (e.g., [5]). But, small-scale voids may be signified by isolated pitted textures. We also did not detect evidence of the cooling fractures or lava plates expected in young lava flows and observed in lunar impact melt deposits. The smooth texture of the mounds is enigmatic. Block-less craters suggest at least 5 m of friable or poorly-cohesive material (such as regolith), yet mound margins exhibit slopes greater than 30 deg requiring significant material strength. Blocks are not common on the mounds, but are sometimes excavated by impacts (usually excavated from beneath the mounds). The uneven deposits are equally enigmatic and texturally varied (blocky, pitted, and crenulated). They are deficient in superposed craters compared to the mounds. If the mounds are indeed of similar age to the rougher units, then their different superposed crater morphologies and SFDs need to be explained by factors other than their ages. Any mounds originally composed of friable surface materials would evolve differently from more coherent deposits (e.g., [6-7]).

Stopar, Julie↗
NASA NTRS2016

Investigation of Optimal Digital Image Correlation Patterns for Deformation Measurement

Digital image correlation (DIC) relies on the surface texture of a specimen to measure deformation. When the specimen itself has little or no texture, a pattern is applied to the surface which deforms with the specimen and acts as an artificial surface texture. Because the applied pattern has an effect on the accuracy of DIC, an ideal pattern is sought for which the error introduced into DIC measurements is minimal. In this work, a study is performed in which several DIC pattern quality metrics from the literature are correlated to DIC measurement error. The resulting correlations give insight on the optimality of DIC patterns in general. Optimizations are then performed to produce patterns which are well suited for DIC. These patterns are tested to show their relative benefits. Chief among these benefits are a reduction in error of approximately 30 with respect to a randomly generated pattern.

Bomarito, G. F.↗
NASA NTRS2018

Calculating the Modal Mineralogy of Aubrite Meteorites Using X-Ray Computed Tomography

The aubrites are a group of differentiated meteorites that formed in extremely reducing conditions, with oxygen fugacities (ƒO2) ranging from ~2 to ~6 log units below the Iron-Wüstite buffer. At these extreme conditions, elements that are lithophile (silica-loving) on Earth can behave as chalcophiles (sulfur-loving) or siderophiles (metal-loving), and FeO-poor silicates and exotic sulfides can form. Elemental partitioning among minerals at these conditions are still not well understood, thus studying aubrites could help better constrain elemental behavior. Only 30 aubrites exist; however, they display various textures, which can be difficult to identify in small samples. Identifying composite clasts can help in understanding the igneous history of the aubrite parent bodies. In order to distinguish different minerals and textures in larger samples, we use X-ray computed tomography (XCT), which is a useful, non-destructive analysis that can produce a 3D representation of a meteorite's textures, structures, and modal mineralogy. This study investigates the Norton County aubrite using XCT. Norton County is a fragmental impact breccia aubrite, and was an observed fall with a main mass of 1.1 tons. This large amount of material offers an opportunity to investigate a great volume of reduced, aubritic sample and study a more diverse variety of clasts. Here we report XCT results of two samples of Norton County (NC 15417) in order to constrain the 3D modal mineralogy of silicates, sulfides, and metals, and to identify unique clasts within the matrix.

Wilbur, Zoe↗
NASA NTRSDate not supplied

TEMPERATURE CONSTRAINT OF THE MISTASTIN LAKE IMPACT STRUCTURE IMPACT MELT ROCKS

Impact melt is a product of hypervelocity cratering events formed by the instantaneous melting of near-surface target rocks. The temperatures of impact melt upon formation are believed to be superheated, vastly exceeding the liquidus temperature of igneous rocks formed via endogenic processes. However, quantitative understanding of the formation and duration of superheated temperatures remains incomplete. To date, only one datum on the hottest post-shock temperature (>2370 °C) has been derived by Timms et al. (2017) [1]. These authors studied the microstructures and crystallographic orientations preserved within a rim of vermicular ZrO2 of a zircon grain entrained within impact glass at the Mistastin Lake impact structure, Canada. Diagnostic crystallographic orientation indicated the presence of cubic zirconia, requiring a minimum temperature for the impact melt of >2370°C from the dissociation of zircon to cubic zirconia and liquid SiO2. With only one temperature datum, it cannot be stated whether the temperature of the impact melt sheet was homogenous across the entire structure or if the thermal history of the melt varied with spatial distribution. In this study, we present a preliminary investigation of 70 zircon grains, 22 of which exhibit rims of vermicular ZrO2 dissociation textures, similar to those studied by Timms et al. (2017). To acquire a more accurate temperature profile representative of impact melt, zircon crystals were collected from different types of impact melt bearing units, including additional samples of the impact glass studied by Timms et al. (2017). Of the 22 zircon grains with dissociation textures, at least 4 grains in the impact glass show diagnostic evidence of pre-existing cubic zirconia, and 1 grain from a glass-bearing breccia exhibits granular zircon textures, possible evidence of a transition from high-P to high-T conditions. These results show the heterogeneous post-shock temperature distribution of superheated impact melt within the Mistastin impact structure. [1] Timms, N.E., Erickson, T.M., Zanetti, M.R., Pearce, M.A., Cayron, C., Cavosie, A.J., Reddy, S.M., Wittmann, A. and Carpenter, P.K., 2017. Cubic zirconia in> 2370° C impact melt records Earth's hottest crust. Earth and Planetary Science Letters, 477, pp.52-58.

rock↗
NASA NTRSDate not supplied

Examining Weathering of Magnesite in an Arid Environment: Implications For Jezero Crater

Introduction:Orbiter data indicatethe presence of carbonates in severallocations on the surface of Mars[1],but Jezero crater, landing site of the Perseverancerover,is the only known location where carbonatesap-pear coincident with evidence of fluvialand lacustrineactivity [2].On Earth, carbonates in close proximity to these paleoenvironments mayindicatethe presence of past microbial life,like stromatolites[3], that could re-sult inbiosignatures [2]. However,in other cases,car-bonates can also form throughthe alteration of mafic materialwiththe introductionof carbonic acid[4].Hy-drated magnesites have also been found in evaporative environments along lake shores, and in playas[5,6,7].Correctly interpreting past carbonates on Mars is there-fore critical in the search for past signs of life. In Jezero crater,both thenorthernand western fans haveMg-rich carbonates intermixed with olivine-rich material[8].According to CRISM data, magnesite(MgCO3), along with hydromagnesite(Mg5(CO3)4(OH)2•4H2O), arepotential candidatesfor these Mg-carbonates [2]. Considering the spatial con-text with olivine,there aremultiplepotential explana-tions for the presence ofMg-carbonatesin this locationincludingin-situformation via alterationof olivine-rich materialwith carbonic acid,transportationfrom farther up in the watershed, or precipitation of lacustrine car-bonates[2]. The formation of hydromagnesite rather than magnesite is favored when Mg2+saturated solutions have a high CO32-/HCO3-ratio, which, on Earth, is thought to be caused byinflow of groundwater [4]. Additionally, Mg-carbonates tend to precipitate under high pH condi-tions and are unstable at lower pH conditions [5]. Hy-dromagnesite is stable at atmospheric CO2pressure and temperature conditions common to most Earth surface environments [9]. However, it is subject to transfor-mation to magnesite after dehydration and concomitant brucite formation or dissolution and reprecipitation [10].Previousresearch suggests that hydrated car-bonates, including hydromagnesite, can formas weath-ering productsof mafic minerals in the presenceof H2O and CO2in subfreezing temperatures and would not de-hydrate under Martian atmospheric conditions [11,12].It is critical to understand the formation conditions of Mg-carbonatesbecause of the different implications for the past history of Martian environments. Therefore, in this work we are investigating the weathering of Mg-carbonatesin arid environments to helpbetter understand Mg-carbonates in Jezero crater. Study Area:The Ala-Mar Mines(East and West)near Ely, NVare the site ofmultiple magnesitedepositsfound within a calcareous tuff formationthat overlies Tertiary aged volcanic rocks.Here,magnesiteis formed via the alteration of the calcareous tuff and occurs innodules, veins,and lenses[13]. Previous work suggests magnesite deposits are associated with faults [13]. Within the West Mine, magnesite can be found in two maincontexts: (1) relatively circular zones of cauli-flower-like material found within (2) a more massivelensthat is heavily fractured on the surface.Methods.Samplesof both the cauliflower texture and more massive materialwere collectedat Ala Mar West Mine. Both samples were thenpowdered, sieved and analyzed with an inXitu Terra Portable XRD. The program QualX was used to identify potential mineral phases [14].Both samples were also optically inspected using 10x and 20x hand lenses.Figure 1. XRD patterns for the cauliflower magnesite (top) and massive magnesite (bottom). Ongoing and future work on the samples discussed above includes scanning electron microscopy (SEM), electron microprobe analysis (EMPA), and near-infra-red spectroscopy to determine whether hydromagnesite is present. Separation and analysis of the clay-size frac-tionby XRD will helpto better identify any phyllosili-cate phases present. Results and Discussion:Both textures are a white to light tan with a porcelain luster on weathered sur-faces, along with minor iron staining in some areas. Likewise, both textures are white with a porcelain luster on fresh surfaces. When broken apart, the massive mag-nesite shows macroscopic crystals, unlike the cauli-flower magnesite. XRD analysis shows that both samples have high concentrationsof magnesite with lesser amounts of thecarbonatemineral huntite(Mg3Ca(CO3)4; Figure1).The more massive samplecontainsa serpentine-groupmineral,with lizardite being apotential candidate. The cauliflower sample has several minor peaks that may correspond to hydromagnesite(Figure 1), although more work is needed to confirm this.Additionally, thecauliflower deposits closely resemble hydromagnesite deposits found in southwestern Turkey, formed via mi-crobialites[15].As such, it is likely that moreaqueous alterationor weatheringis occurring at the locations where the cauliflower magnesite is present. However, additional field work will need to be conducted to con-firm this hypothesis. Conclusions and Future Work:Future work will include field mapping of fault locations andadditional samplingof the different magnesite types as well as of the calcareous tuffmaterial.We will also look specifi-cally for potential weathering products of magnesite in this arid location, which may yield important insight into the Mg-carbonates located in Jezero crater. XRD analyses on aPANalytical XRDusing non-ambient stages will be used to investigate the stability of hydro-magnesiteat different humiditiesand temperatures, which has implications for samples to bereturned to Earth in the future. Additionally, thermal and evolved gas analysis of magnesite and hydromagnesite will be compared to results from Gale Craterto help interpret the mineralogy inthat location[16]. The results of this research will further ourunderstanding of carbonate for-mationin volcanic settingsandtheirweathering pro-cessesin arid environments. Acknowledgments:We acknowledge funding for this research from Jacobs Technology at the Johnson Space Center.We would also like to thank Ngoc Luu, Christopher Adcock, Richard Allanson, and the rest of the UNLV Soil Science Teamfor their continued sup-portwith troubleshooting and otherlab work. References:[1] Ehlmann, B.L., and Edwards, C.S. (2014) Annual Review of Earth and Planetary Sci., 42, 291–315. [2] Horgan, B.H.N., et al. (2020) Icarus, 339, 113526. [3] Bosak, T., et al. (2013) Annual Review of Earth and Planetary Sci, 41, 21–44. [4] Pohl, W.L. (1989) Gebriider Borntraege, 28, 1-13. [5] Müller, G., et al. (1972) Die Naturwissenschaften, 59, 158–164. [6] Walter, M.R., et al. (1973) Journal of Sedimentary Pe-trology, 43, 1021–1030. [7] Braithwaite, C.J.R., and Zedef, V. (1994) Sedimentary Geology, 92, 1–5. [8] Goudge, T.A., et al. (2015) JGR: Planets, 120, 775–808. [9] Langmuir, D. (1965) Journal of Geology, 73, 730–754. [10] Zhang, P., et al. (2000) Applied Geo-chem., 286, 1748–1753. [11] Calvin, W.M., et al. (1994) JGR, 99, 14659-14675. [12]Russell, M.J., et al. (1999) Journal of the Geological Society of London, v. 156, p. 869–888. [13] Faust, G.T., and Callaghan, E. (1948) GSA Bulletin, 59, 11–74. [14] Altomare, A., et al. (2015) J. of Applied Crystallography, 48, 598–603. [15] Zedef, V.,et al. (2000) Economic Geology, 95, 429–445. [16] Leshin, L.A. et al., (2013) Science, 341, 1–9

A W Provow↗
NASA NTRSDate not supplied

Pink Spinel in Apollo Impact Melt Rock 68815: Implications for Mg-Suite Magmatism

Introduction: Magnesian rocks from the lunar highlands are collectively termed the Mg-suite. Characterized by high (>60) Mg# (molar 100×Mg/[Mg+Fe]) in mafic phases and calcic plagioclase, these rocks are plutonic to hypabyssal in origin, and include a range of bulk mineralogies such as troctolites, dunites, norites, gabbronorites, and spinel troctolites [1]. These Mg-suite lithologies have distinct trace element concentrations and ratios that differentiate them from other lunar rock types. These rocks are ancient, generally dated to between 4.5 and 4.1 Ga, although it is unknown if this represents the full range of Mg-suite ages [1–2]. Among the Mg-suite lithologies, the spinel troctolites are relatively rare, to date only found in polymict breccias [3]. Spinel troctolites, as their name suggests, consist of calcic plagioclase and forsteritic olivine, with minor amounts of spinel (MgAl2O4), ± pyroxene and cordierite [1,4]. This form of spinel is often called ‘pink’ spinel because of its appearance in thin section under plane polarized light (PPL; Fig. 1), due to minor amounts of Cr. Spinel troctolites are generally plutonic or hypabyssal in origin (subsequently exhumed and incorporated into polymict breccias), or formed through impact processes (e.g., crystalline impact melt) [5]. A spinel-rich lithology has also been found in the Moscoviense region of the Moon via the Moon Mineralogy Mapper (M3) and lacks other mafic phases [6]. Finally, while the Mg-suite sampled thus far consists of plutonic (or hypabyssal) rocks, the question remains if such magmas could have erupted on the surface of the Moon [7]. These magmas have much lower density than mare basalts, but little sample or remote sensing evidence has been found to support the idea that extrusive Mg-suite volcanism occurred [7]. Here, we present a coordinated microanalytical study of spinel-bearing lithic and mineral clasts found in Apollo sample 68815. These data will be used to understand their petrogenesis (magmatic or impact) and modification histories, and to shed light on the existence of volcanic Mg-suite rocks. Sample Description: Apollo sample 68815 is a polymict impact melt breccia containing a variety of lithic and mineral fragments embedded in devitrified impact melt. This sample was chipped off the top of a boulder at Station 8 during the Apollo 16 mission and had an original weight of nearly 1.8 kg. In this study, we investigated two polished thin sections of 68815: 68815,17 and 68815,148, both containing spinel. Methods: The thin sections of 68815 were studied using optical light microscopy (PPL, cross-polarized light, and reflected light) with a Keyence VHX-7100 Digital Microscope. Each section was then X-ray mapped for 13–14 elements using a Cameca SX100 electron probe microanalyzer (EPMA) located in the Kuiper Materials Imaging and Characterization Facility (KMICF) at the University of Arizona. We have obtained geochemical information about the phases (olivine, plagioclase, spinel, pyroxene) in the thin sections also using the EPMA. In addition, we have used ThermoScientific Helios NanoLab 660 Focused-Ion-Beam Scanning-Electron Microscope (FIB-SEM) and a Hitachi S-4800 SEM (both in KMICF) to obtain backscattered electron (BSE) images and energy dispersive Xray spectrometry (EDS) maps of areas of interest. Using a JEOL 7900F SEM at the Astromaterials Research & Exploration Science (ARES) at NASA Johnson Space Center (JSC), we have obtained electron backscatter diffraction (EBSD) maps of the spinel-bearing portions of the thin sections. The EBSD data were collected under beam conditions of 20 kV, and ~90 μA, with step sizes varying from 0.05 to 2 μm. Following EBSD data collection, we processed the data using AZtecCrystal and MTEX, a free MATLAB toolbox. Results: We have found clasts with subophitic textures, that consist of primarily olivine and plagioclase, with minor amounts of pink Mg-Al spinel and pyroxene (Fig. 1). These clasts are up to ~1 mm in length and contain spinels up to 50 μm across. We have additionally identified pink Mg-Al spinels within the impact melt (i.e., not contained in lithic clasts) in both thin sections. In one instance, a single spinel grain is approximately 300 μm across (Fig. 1b, 2). The spinel fragments embedded in impact melt have varying compositions, typically distinct from the compositions of spinels in the lithic clasts. Spinel-Bearing Clasts: Ten lithic clasts with similar textures and mineral compositions were identified between 68815,17 (two clasts) and ,148 (eight clasts). These clasts fall into two groups. The first has skeletal olivine with intergranular plagioclase, with minor amounts of pyroxene and spinel (Fig. 1a, 2c, 2d). The spinel in these clasts are found amid the plagioclase. The second group have an intergranular texture of olivine and plagioclase, again with minor spinel and pyroxene. The second group may contain spinels surrounded by plagioclase, and spinels enclosed in olivine. Spinels located within both clast types range from no apparent Cr zoning, to reverse zoning (Cr-enrichment inward; Fig. 2d), to normal zoning (Cr-enrichment outward). In the clasts thus far investigated with EPMA, plagioclase compositions range from An# (molar 100×Ca/[Ca+Na+K]) 92–96. Olivine Mg# ranged from 77 to 94, while pyroxene had Mg# from 54–84. Spinel in the clasts have Cr# (molar 100×Cr/[Cr+Al]) 2–4 and Mg# 88–91, which is within the range of pristine and plutonic spinel troctolites [8]. Isolated Spinels: These crystals are generally euhedral to subhedral, and can exhibit reverse Cr zoning (Cr enrichment inward) or no apparent Cr zoning. The spinels thus far investigated via EPMA have Cr# 9–14 and Mg# 65–82. The Cr# for these spinels is within the range reported by [8], but have lower Mg#. Future Work: We will continue to process the EBSD data for these lithic and mineral clasts. We will also continue to characterize these clasts using EPMA and SEM. By thoroughly characterizing the various spinels and spinel-bearing clasts, we aim to constrain the petrogenesis of these minerals and rock fragments. Acknowledgments: We thank NASA for the loan of these thin sections. We thank Ken Domanik and Jerry Chang for their support with data collection. Work was supported by a University of Arizona RII Core Facilities Pilot Program grant and start-up funds to JJB. We acknowledge support from NASA’s Planetary Science Research program for analysis performed at JSC. References: [1] Shearer C. K. et al. (2015) Am. Min. 100, 294–325. [2] Borg L. E. et al. (2020) GCA 290, 312–332. [3] Warren P. H. (1993) Am. Min. 78, 360–376. [4] Dymek R. F. et al. (1976) LPS VII, 2335–2378. [5] Treiman et al. (2019) Am. Min. 104, 370–384. [6] Pieters et al. (2011) JGR: Plan. 116:E00G08. [7] Prissel et al. (2016) Icarus 277, 319–329. [8] Prissel et al. (2016) Am. Min. 101, 1624–1635.

spinel↗
NASA NTRSDate not supplied

First-results from the Perseverance SHERLOC Investigation: Aqueous Alteration Processes and Implications for Organic Geochemistry in Jezero Crater, Mars

The Perseverance rover landed in Jezero crater, a site selected to fulfill the Mars-2020 mission goals of characterizing the geology of habitable environments and searching for signs of life while collecting samples for return to Earth [1]. Jezero hosted an open-basin lake during the late Noachian/early Hesperian (~3.7 Ga) [1-2], has units associated with the largest carbonate deposit identified on Mars [3-4], and has a well-preserved delta with clay and carbonate-bearing sediments, well-suited to preservation of organics [1,3-4]. Investigating the nature of organics and aqueous environments within their geologic con-text allows us to understand important aqueous processes and determine habitability within Jezero crater. Previous in situ landed measurements of organics could not resolve their spatial and mineralogical con-text [5-6]. Although Martian meteorites lack geological context, the spatial distribution of organic compounds in Martian meteorites have allowed recognition of an association between aqueous processes and organics [7-8]. Here, we show for the first time in-situ associations between carbonate-forming ultramafic alteration process, later stage aqueous sulfate and perchlorate formation, and organics on the Martian surface. Methodology and geological context: We use the Perseverance rover’s SHERLOC instrument (Scanning Habitable Environments with Raman and Lumines-ence of Organics and Chemicals), a deep-ultraviolet fluorescence and Raman scattering spectrometer capable of mapping the organic and mineral composition with a spatial resolution of 100 μm resolution to report the presence of organics and aqueously formed minerals at Jezero crater [9]. These spectral detections were compared with co-located images obtained with the autofocus context imager (ACI) and the WATSON camera for textural analysis [9]. As of writing, the Per-severance rover has abraded five targets that were measured with the SHERLOC instrument. The five targets are located in two different orbitally-identified geological units within the floor of Jezero crater; the Crater Floor Fractured Rough unit (CF-Fr) and the Séítah region within the Crater Floor Fractured 1 unit (CF-F1) [10]. In orbital infrared spectroscopic data, the CF-Fr unit is associated with pyroxene spectral signatures and minor alteration, while the Séítah region is associated with olivine and minor Mg-rich carbonates and clays [3-4,10]. Carbonation of ultramafic protolith recorded within Jezero crater: All scans of abraded targets within the Séítah region reveal strong peaks at 1080–1090 cm−1 consistent with carbonate and peak singlets or doublets at 820–840 cm−1 attributed to olivine (Fig. 1), consistent with orbital infrared observations. Our detailed micron-scale petrographic and spectroscopic evidence shows that these carbonates formed through carbonation of an ultramafic protolith. The supporting observations include: (1) Carbonate cation compositions match those of olivine, suggesting mixed Fe- and Mg-olivine gave rise to mixed Fe- and Mg-carbonates, similar to observations of ultramafic systems on Earth and within Martian meteorites [3-4,7-8]. (2) The ob-served carbonates co-occur with hydrated materials, gypsum, and potentially aqueously-formed phases, amorphous silicates and phosphate. (3) The spectral and textural variation of olivine and carbonate dominated zones and olivine-carbonate mixtures within both primary grains and interstitial zones are expected for carbonated ultramafic protoliths. (4) These mineral associations and textures closely resemble those observed within the ALH84001 and Nakhlite meteorites attributed to olivine carbonation on Mars [6-7]. Taken together, micron-scale SHERLOC documentation of these phenomena bridge previous orbital and meteorite observations and demonstrate in-situ regionally extensive (~106 km2) ultramafic alteration resulting in geo-logical deposition of carbonates. Furthermore, we observe that olivine carbonation was involved in preserving and possibly synthesizing organics, which makes this environment potentially habitable, as previously suggested in [1,3-4] (Fig. 1). Late-stage aqueous perchlorate and sulfate in Jezero crater: An abrasion target within the CF-Fr unit contains combinations of high intensity 950-955 cm−1 peaks and minor 1090-1095 cm−1 and 1150-1155 cm−1 peaks that are spectral fits to anhydrous perchlorate (Fig. 1). Some spectra show a combination of 950-955 cm−1 peaks with equally strong 1010-1020 cm−1 peaks, low intensity broad features at 1120 cm−1, and occasional broad 3450 cm−1 hydration (-OH) features, indicating a mixture of Ca-sulfate and perchlorate that is minimally hydrated (Fig. 1). The detections of per-chlorates within Jezero crater differ from previous measurements (e.g. Phoenix lander, Curiosity rover, Tissint meteorite [7,11]) because they are observed to be intimately related to aqueous processes including sulfate formation, they present as a secondary white void-fill occurring within the interior of the rock, and they are found to likely be Na-perchlorate. implications for their formation: Three different types of organics embedded within three different lithologies were observed within the abraded targets. Organics associated with low intensity ~340 nm fluorescence were widespread within targets with no apparent association to particular minerals (Fig. 1). Organics associated with ~305 nm and ~275 nm fluorescence correlated with sulfates within the Bellegarde target in the CF-Fr unit, while organics associated with high intensity ~340 nm fluorescence correlated with carbonate, phosphate, and amorphous silicate mixtures within the Garde target in the Séítah region (Fig. 1). Although assignment of fluorescence signatures to specific organic compounds is not conclusive, ~340 nm fluorescence is generally more consistent with 2-ring aromatic organics, ~275 nm fluorescence is more consistent with 1-ring aromatic organics, and ~305 nm fluorescence can be created by either 2- or 1-ring aromatics [12]. These observations indicate that the strongest fluorescence signatures interpreted as organics were found in materials associated with aqueous processes, i.e. sulfate- and carbonate-bearing materials, suggesting both brines and ultramafic carbonation aqueous environments were capable of preserving organics on ancient Mars. In Martian meteorites, simple aromatic organics proposed to have been synthesized through aqueous processes can be found within minerals associated with olivine carbonation and in spatial association with perchlorate and sulfate materials [7-8], similar to SHERLOC observations. Hence, we advance an abiotic aqueous synthesis origin for the organics although we cannot rule out the presence of organics from meteoritic in-fall or putative organic biosignatures. Detailed analyses will be required upon return of these materials to Earth.

E L Scheller↗
NASA NTRSDate not supplied

Characterization of Additively Manufacture GRCop-42 and GRCop-84

GRCop-42 (Cu-4 at.% Cr-2 at.% Nb) is a copper-based alloy optimized for high temperature, high thermal conductivity applications such as regenerative cooled rocket engine liners. For this application, it is important to minimize contamination such as trace elements and ceramic inclusions. NASA initiated a series of ten builds by eight companies to assess the repeatability of GRCop-42 between vendors and machines. Utilizing inductively coupled plasma – atomic emission spectroscopy (ICP-AES) and energy dispersive spectroscopy (EDS) techniques allowed for identification of contaminants and quantification of their chemistry. In addition, additive manufacturing (AM) creates a unique microstructure that is often highly textured in the build (Z) direction. Electron backscattered diffraction (EBSD) was used to begin quantifying the degree of crystallographic texture in the copper matrix grains. It was also used to identify the crystallographic form of Cr2Nb, the main strengthening phase, present in the samples. Results showed the presence of ceramic inclusions, highly textured grains, and both the low and high temperature phases of Cr2Nb being present.

copper↗
NASA NTRSDate not supplied

Terrestrial Analogue Studies from ISRO’s Venus Mission Perspective: Polarimetric Radar Properties of Hawaiian Lava Flows

Detection of present and past volcanism on Venus is one of the major goals of the proposed ISRO’s Venus orbiter mission. The S-band, high-resolution (40 m/pixel) fully Polarimetric Synthetic Aperture Radar (PolSAR) instrument on this mission [1] may have the capabilities to detect volcanism within the mission lifetime using repeated PolSAR imagery, and possibly SAR Interferometry (InSAR, experimental mode). The global mapping efforts of Venus by Magellan mission has enabled comprehensive mapping of lava flows and indicated that Venus has an extensive history of volcanism, the ages of which are largely unknown (e.g. [2]). While Magellan radar emissivity data (e.g. [3, 4]) and Near Infrared emissivity data from VIRTIS [5] suggested the occurrence of recent episodes of volcanic activity (e.g. Maat Mons and Ganis Chasma), as well as the presence of stratigraphically young lava flows (e.g. Idunn Mons), measuring changes in radar backscatter amplitude alone to identify lava flows has many challenges. Although very large changes in the shape of the terrain can be observed in radar backscatter amplitude changes (e.g. [6]), smaller, or relatively flat lava flows are difficult to detect. Previous terrestrial studies suggest that PolSAR and InSAR techniques are very effective for mapping lava flows (e.g. [7-9]), and can be used when changes cannot be distinguished in radar backscatter images. We use the unvegetated lava flows on Hawaiʻi island as a terrestrial analogue to study Venus lava flows for the following reasons: (a) It is extensively studied at several wavelengths commonly used in remote sensing studies (including PolSAR and InSAR methods); and (b) it is a volcanically active area with new lava flows frequently covering older emplaced flows. To investigate the surface roughness, texture, and fine-grained mantling associated with Mauna Loa and Kilauea lava flows, we utilize C- and L-band PolSAR datasets obtained from RISAT-1A (EOS-4) and ALOS PALSAR missions respectively. In particular, we will use the quad-polarized backscatter and polarimetric parameters to characterize the texture of the terrestrial lava flows to understand whether the Venus crust is continuously disrupted during flow emplacement. While some previous studies (e.g. [10, 11]) suggested that surface roughness of most of the Venus flows is comparable to that of terrestrial pāhoehoe flows, other studies indicated that fractal dimensions of some large lava flows on Venus imply high eruption rates which favour the formation of a’a flows (e.g. [12]). We will also analyse the terrestrial flows for the presence/absence of pyroclastic mantling as radar-bright diffuse deposits near the summit regions of some coronae on Venus have been proposed to be young pyroclastics, and possible evidence of a renewed epoch of mantle volcanism that taps into deeper volatiles [13]. A recent study using EOS-4 RISAT-1 data of a part of fresh Mauna Loa lava flows (2022 eruption) emphasizes the ability of fully polarimetric SAR data to understand the diversity of physical properties (e.g. texture and morphology) associated with them (Sreejith et al. 2024); and we will apply similar methods to the PolSAR data obtained from ISRO’s Venus mission for our proposed objectives.

Sriram S Bhiravarasu↗
DOE OSTI2025

Hyperspectral Cathodoluminescence of Bastnäsite at the Mountain Pass Mine, USA: Implications for REE Mineralisation and Mining

This study uses micro-analyses including hyperspectral cathodoluminescence to image and obtain mineral spectral to help evaluate REE deportment via from Mountain Pass Mine in California. It presents the first known CL-based spectra for bastnäsite, new information regarding baryte CL spectra, providing insights on the coeval and spatial relationship between REE, Ba, and S in carbonatite systems. Bastnäsite, baryte, and monazite are often intergrown in both brecciated, “blue ore” samples, and these minerals occur as an apparent intercumulus texture in the dolomite-rich, “white ore” samples. Bastnäsite luminescence is present, but very low compared to baryte in the visible spectrum. Bastnäsite illustrates some textural variability related to its main luminescent peak ~1.4 eV, which is indicative of Nd3+. It also exhibits several other small peaks comprised of multiple activators related to various REE, including Ce3+, Sm3+, Eu3+, and potentially Eu2+. Baryte displays textures of variable complexity but often with darker rims near crystal margins. It luminesces mainly at 1.4-1.52 eV, 2.05 eV, and 3.59-4.08 eV. The 2.05 eV peak is likely attributed to Ag+, but the other peaks are more enigmatic.

58 - GEOSCIENCES↗
DOE OSTI2026

3⁢𝑄 magnetic order with spatially alternating spin scalar chirality in overdoped C⁢o 0.336⁢ Ta⁢S 2

C⁢o 𝑥 ⁢Ta⁢S 2 (𝑥≈1/3) exhibits a spontaneous Hall effect from spin texture in antiferromagnets, with a tetrahedral triple-Q (3Q) order and uniform spin scalar chirality. Upon Co overdoping (𝑥>1/3), it undergoes a shift in magnetic ordering vectors from 𝐐 m =(1/2, 0, 0) to (1/3, 0, 0). Interestingly, the spontaneous Hall effect disappeared in the overdoped regime, which was originally attributed to the loss of 3Q order. However, a question remains whether a new type of 3Q order can exist with alternating chirality in the overdoped regime. To address this, we investigated C⁢o 0.336⁢ Ta⁢S 2 using inelastic neutron scattering (INS), neutron diffraction, and optical dichroism, and found that INS data and spin-wave simulations support a 3Q order with alternating chirality. Moreover, neutron diffraction data show field-independent Bragg peaks, while linear dichroism detects no in-plane anisotropy, consistent with threefold rotation symmetry. Our data support the scenario of an alternating-chirality 3Q order in C⁢o 0.336 ⁢Ta⁢S 2 , canceling the spontaneous Hall effect. Furthermore, this study highlights a combined neutron-optical approach to identify complex spin textures.

Landau-Lifschitz-Gilbert equation↗
DOE OSTI2025

Symmetry-Based Phenomenological Model for Magnon Transport in a Multiferroic

Magnons-carriers of spin information-can be controlled by electric fields in the multiferroic BiFeO 3 (BFO), a milestone that brings magnons closer to application in future devices. The origin of magnon-spin currents in BFO, however, is not fully understood due to BFO's complicated magnetic texture. In this Letter, we present a phenomenological model to elucidate the existence of magnon spin currents in generalized multiferroics by examining the symmetries inherent to their magnetic and polar structures. This model is grounded in experimental data obtained from BFO and its derivatives, which informs the symmetry operations and resultant magnon behavior. By doing so, we address the issue of symmetry-allowed, switchable magnon spin transport in multiferroics, thereby establishing a critical framework for comprehending magnon transport within complex magnetic textures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Skyrmion-skyrmionium phase separation and laning transitions via spin-orbit torque currents

Many driven binary systems can exhibit laning transitions when the two species have different mobilities, such as colloidal particles with opposite charges in electric fields. Another example is pedestrian or active-matter systems, where particles moving in opposite directions form a phase-separated state that enhances the overall mobility. In this work, we use atomistic simulations to demonstrate that mixtures of skyrmions and skyrmioniums also exhibit pattern formation and laning transitions. Skyrmions move more slowly and at a finite skyrmion Hall angle compared to skyrmioniums, which move faster and without a skyrmion Hall effect. At low drives, the system forms a partially jammed phase where the skyrmioniums are dragged by the surrounding skyrmions, resulting in a finite angle of motion for the skyrmioniums. At higher drives, the system transitions into a laned state, but unlike colloidal systems, the lanes in the skyrmion-skyrmionium mixture are tilted relative to the driving direction due to the intrinsic skyrmion Hall angle. In the laned state, the skyrmionium angle of motion is reversed when it aligns with the tilted lane structure. At even higher drives, the skyrmioniums collapse into skyrmions. Below a critical skyrmion density, both textures can move independently with few collisions, but above this density, the laning state disappears entirely, and the system transitions to a skyrmion-only state. We map out the velocity and Hall responses of the different textures and identify three distinct phases: partially jammed, laned, and skyrmion-only moving crystal states. In conclusion, we compare our results to recent observations of tilted laning phases in pedestrian flows, where chiral symmetry breaking in the particle interactions leads to similar behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Soil Characterizations of Five Urban Sites in Knoxville, Tennessee. 2024-2025

This dataset includes soil characterizations from five urban parks in Knoxville, Tennessee, USA: Cumberland Estates Park (CEP), Socially Equal Energy Efficient Development (SEED), West View Park (WVP), Victor Ashe Park (VAP), and West Hills Park (WHP). The dataset consists of seven CSV files reporting the data from the measurements of gravimetric moisture content, pH, total carbon and nitrogen, soil texture, dissolved organic carbon and nitrogen, and microbial biomass carbon and nitrogen derived from these soil cores. During five separate sampling events conducted in 2024 and 2025, five soil cores were collected at each site within 3 meters of the remote soil monitoring equipment. In 2025, an additional three soil cores were collected adjacent to the monitoring equipment at each site to assess soil bulk density. This dataset is part of a larger study investigating the effects of soil moisture and plant evapotranspiration on ambient temperature and relative humidity across multiple urban parks in Knoxville, Tennessee.

Mayes, Melanie A [ORNL] (ORCID:0000000163689210)↗
NASA NTRS1996

(abstract) Topographic Signatures in Geology

Topographic information is required for many Earth Science investigations. For example, topography is an important element in regional and global geomorphic studies because it reflects the interplay between the climate-driven processes of erosion and the tectonic processes of uplift. A number of techniques have been developed to analyze digital topographic data, including Fourier texture analysis. A Fourier transform of the topography of an area allows the spatial frequency content of the topography to be analyzed. Band-pass filtering of the transform produces images representing the amplitude of different spatial wavelengths. These are then used in a multi-band classification to map units based on their spatial frequency content. The results using a radar image instead of digital topography showed good correspondence to a geologic map, however brightness variations in the image unrelated to topography caused errors. An additional benefit to the use of Fourier band-pass images for the classification is that the textural signatures of the units are quantative measures of the spatial characteristics of the units that may be used to map similar units in similar environments.

topography geology texture Fourier analysis↗
NASA NTRS2023

Evaluation of Through-thickness Microtextural Characteristics in 2219-T87 Thick Plate

The objective of this investigation was to establish whether crystallographic texture played a role in variable ST ductility in 2219-T87 thick plate. The EBSD study involved data collection at NASA Glenn Research Center and ODF analysis of the imported data at NASA Langley Research Center. The most significant result was that through-thickness variations in microtextural characteristics were asymmetrical about the mid-plane of the plate. However, the overall texture intensity was low, such that cross-sectional variations were classified as a second order effect on ST ductility.

Aluminum alloy↗
DOE OSTI2025

Controls From Above and Below: Snow, Soil, and Steepness Drive Diverging Trends of Subsurface Water and Streamflow Dynamics

ABSTRACT The importance of subsurface water dynamics, such as water storage and flow partitioning, is well recognised. Yet, our understanding of their drivers and links to streamflow generation has remained elusive, especially in small headwater streams that are often data‐limited but crucial for downstream water quantity and quality. Large‐scale analyses have focused on streamflow characteristics across rivers with varying drainage areas, often overlooking the subsurface water dynamics that shape streamflow behaviour. Here we ask the question: What are the climate and landscape characteristics that regulate subsurface dynamic storage, flow path partitioning, and dynamics of streamflow generation in headwater streams? To answer this question, we used streamflow data and a widely‐used hydrological model (HBV) for 15 headwater catchments across the contiguous United States. Results show that climate characteristics such as aridity and precipitation phase (snow or rain) and land attributes such as topography and soil texture are key drivers of streamflow generation dynamics. In particular, steeper slopes generally promoted more streamflow, regardless of aridity. Streams in flat, rainy sites (< 30% precipitation as snow) with finer soils exhibited flashier regimes than those in snowy sites (> 30% precipitation as snow) or sites with coarse soils and deeper flow paths. In snowy sites, less weathered, thinner soils promoted shallower flow paths such that discharge was more sensitive to changes in storage, but snow dampened streamflow flashiness overall. Results here indicate that land characteristics such as steepness and soil texture modify subsurface water storage and shallow and deep flow partitioning, ultimately regulating streamflow response to climate forcing. As climate change increases uncertainty in water availability, understanding the interacting climate and landscape features that regulate streamflow will be essential to predict hydrological shifts in headwater catchments and improve water resources management.

Kerins, Devon [Department of Civil and Environment↗
DOE OSTI2024

Measuring and modeling soil moisture and runoff at solar farms using a disconnected impervious surface approach

Abstract Ground‐mounted photovoltaic sites are often treated as impervious surfaces in stormwater permits. This ignores the pervious soils beneath and between solar arrays and leads to an overestimation of runoff. Our objective was to improve solar farm stormwater hydrology models by explicitly considering the disconnected impervious nature of solar design and site characteristics. Experimental sites established on utility scale solar farms in Colorado, Georgia, Minnesota, New York, and Oregon had perennial vegetative plantings with mean precipitation ranging from 40.6 to 124.5 cm, and soil texture ranging from loamy sand to clay. Soil moisture measurements were collected beneath arrays, under drip edges, and in the vegetated area between arrays at each site. Hydrus‐3D models for soil moisture and stormwater hydrology were developed that accounted for precipitation falling on solar panels, drip edge redistribution of rainfall, infiltration, and runoff in the pervious areas between solar arrays and beneath panels. Drip edge runoff averaged 3‐ to 10‐times incident precipitation at the New York and Minnesota sites, respectively. Root mean square error values between measured sub‐hourly soil moisture and predicted moisture for large measured single storm events averaged 0.029 across all five sites. Predicted runoff depths were strongly affected by precipitation depth, soil texture, soil profile depth, and soil bulk density. Runoff depths across the five experimental sites averaged 13%, 25%, and 45% of the 2‐, 10‐, and 100‐year design storm depths, clearly showing that these solar farms do not behave like impervious surfaces, but rather as disconnected impervious surfaces with substantial infiltration of runoff in the vegetated areas between and beneath solar arrays.

Agriculture↗