High-Resolution In-Situ Synchrotron X-Ray Studies of Inorganic Perovskite CsPbBr[subscript 3]: New S
Explore the source record for details and available documents.
Liu, Sizhan↗
SEARCH · Search NASA
Results for “X ray diffraction analysis”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Molecular beam epitaxy and crystal structure of majority a -plane-oriented and substrate-strained Mn 3 Sn thin films grown directly on sapphire (0001)
The Kagome antiferromagnet Mn 3 Sn has garnered much attention due to the presence of exciting properties such as anomalous Hall and Nernst effects. This paper discusses the synthesis of crystalline Mn 3 Sn thin films, prepared on Al 2 O 3 (0001) substrates at 453 ± 5°C using molecular beam epitaxy. The growth is monitored in situ using reflection high energy electron diffraction and measured ex situ using x-ray diffraction, Rutherford back-scattering, and cross-sectional scanning transmission electron microscopy. Our analysis shows the in-plane lattice constants of a 1,M = 4.117 ± 0.027 Å and a 2,M = 4.943 ± 0.033 Å, which is a very unexpected result when compared to the bulk a-plane Mn 3 Sn. This indicates a strain in the film and makes it challenging to provide a straightforward explanation. In an effort to explain our results, we discuss two possible orientation relationships between the Mn 3 Sn films and the sapphire substrates. Samples prepared under these conditions appear to have smooth surfaces locally, but overall the film has a 3D island morphology. First-principles calculations provide atomic models of the Mn 3 Sn (112¯0) lattice on Al 2 O 3 (0001) high symmetry sites, indicating that the L3-R90° is the most stable configuration. A detailed discussion of the experimental data and theoretical results, as well as strain effects, is provided.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Transformation of a ceramic precursor to a biomedical (metallic) alloy: Part I – sinterability of Ta 2 O 5 and TiO 2 mixed oxides
Mixed Ta 2 O 5 – TiO 2 binary system was studied by a combination of differential thermal analysis (DTA), scanning electron microscopy-energy dispersive spectrometry (SEM-EDS), X-ray diffraction (XRD) and in situ high temperature X-ray diffraction (HT-XRD) techniques. Different compositions of the mixed oxide powders were fabricated by ball–milling the powdered compositions, pelletizing the homogenized composite powders, and heating the green pellets in air at different temperatures for fixed time intervals. The sintered pellets were evaluated and characterized with respect to porosity, morphology, and phase distribution. DTA runs of the un-sintered powders indicated the onset temperatures for both exothermic and endothermic changes in the binary system. Significant amount of sintering was observed to take place at temperatures higher than 900 °C. Both room and high temperature X-ray diffraction patterns exhibited consistency in phase formation. A ternary compound (TaTiO 4 ) and a ternary solid solution (Ti 0.33 Ta 0.67 O 2 ) were observed to form in both room and high temperatures in addition to the respective binary phases (Ta 2 O 5 and TiO 2 ). A sintering temperature in the range 900–1000 °C was observed to be adequate to achieve the requisite mechanical strength and optimum internal porosity (40–48%) for subsequent electrochemical polarization experiments.
36 MATERIALS SCIENCE↗
Rietveld Refinement for Macromolecular Powder Diffraction
Powder X-ray diffraction (PXRD) has been employed extensively for the structural characterization of materials, quantitative analysis of multicomponent mixtures, phase identification, texture, and microstructural analysis. At the heart of all those lies the Rietveld method, which has revolutionized the use of powder diffraction for materials studies. Initially applied to minerals and inorganics, the Rietveld method has progressively been used for more complex materials, for instance, zeolites and pharmaceuticals. A major advance of the method came some 20 years ago, when the first protein structure was successfully refined. Because of the sheer complexity of macromolecules, several new approaches and algorithms had to be pioneered or adapted from macromolecular single-crystal diffraction experiments, thus constituting macromolecular PXRD a quite unique field of study. This review aims to provide necessary elements of theory and application of structure solution and refinement via the Rietveld method for macromolecular PXRD data. Here, practical explanations and highlighted case studies are also presented.
36 MATERIALS SCIENCE↗
Crystallography companion agent for high-throughput materials discovery
The discovery of new structural and functional materials is driven by phase identification, often using X-ray diffraction (XRD). Automation has accelerated the rate of XRD measurements, greatly outpacing XRD analysis techniques that remain manual, time-consuming, error-prone and impossible to scale. With the advent of autonomous robotic scientists or self-driving laboratories, contemporary techniques prohibit the integration of XRD. Here, we describe a computer program for the autonomous characterization of XRD data, driven by artificial intelligence (AI), for the discovery of new materials. Starting from structural databases, we train an ensemble model using a physically accurate synthetic dataset, which outputs probabilistic classifications—rather than absolutes—to overcome the overconfidence in traditional neural networks. This AI agent behaves as a companion to the researcher, improving accuracy and offering substantial time savings. It is demonstrated on a diverse set of organic and inorganic materials characterization challenges. This method is directly applicable to inverse design approaches and robotic discovery systems, and can be immediately considered for other forms of characterization such as spectroscopy and the pair distribution function.
36 MATERIALS SCIENCE↗
Coherent diffractive imaging with twisted X-rays: Principles, applications, and outlook
Recent technological breakthroughs in synchrotron and x-ray free electron laser facilities have revolutionized nanoscale structural and dynamic analyses in condensed matter systems. This review provides a comprehensive overview of the advancements in coherent scattering and diffractive imaging techniques, which are now at the forefront of exploring materials science complexities. These techniques, notably Bragg coherent diffractive imaging and x-ray photon correlation spectroscopy, x-ray magnetic dichroism, and x-ray correlation analysis leverage beam coherence to achieve volumetric three-dimensional imaging at unprecedented sub-nanometer resolutions and explore dynamic phenomena within sub-millisecond timeframes. Such capabilities are critical in understanding and developing advanced materials and technologies. Simultaneously, the emergence of chiral crystals—characterized by their unique absence of standard inversion, mirror, or other roto-inversion symmetries—presents both challenges and opportunities. These materials exhibit distinctive interactions with light, leading to phenomena such as molecular optical activity, chiral photonic waveguides, and valley-specific light emissions, which are pivotal in the burgeoning fields of photonic and spintronic devices. This review elucidates how novel x-ray probes can be leveraged to unravel these properties and their implications for future technological applications. A significant focus of this review is the exploration of new avenues in research, particularly the shift from conventional methods to more innovative approaches in studying these chiral materials. Inspired by structured optical beams, the potential of coherent scattering techniques utilizing twisted x-ray beams is examined. This promising direction not only offers higher spatial resolution but also opens the door to previously unattainable insights in materials science. By contextualizing these advancements within the broader scientific landscape and highlighting their practical applications, this review aims to chart a course for future research in this rapidly evolving field.
Physics↗
bnl/pub-Maffettone_2020_08
The application of the XCA package as first demonstrated in aXiv:2008.00283. ABSTRACT: The discovery of new structural and functional materials is driven by phase identification, often using X-ray diffraction (XRD). Automation has accelerated the rate of XRD measurements, greatly outpacing XRD analysis techniques that remain manual, time consuming, error prone, and impossible to scale. With the advent of autonomous robotic scientists or self-driving labs, contemporary techniques prohibit the integration of XRD. Here, we describe a computer program for the autonomous characterization of XRD data, driven by artificial intelligence (AI), for the discovery of new materials. Starting from structural databases, we train an ensemble model using a physically accurate synthetic dataset, which output probabilistic classifications --- rather than absolutes --- to overcome the overconfidence in traditional neural networks. This AI agent behaves as a companion to the researcher, improving accuracy and offering unprecedented time savings, and is demonstrated on a diverse set of organic and inorganic materials challenges. This innovation is directly applicable to inverse design approaches, robotic discovery systems, and can be immediately considered for other forms of characterization such as spectroscopy and the pair distribution function.
Maffettone, PhillipM [Brookhaven National Lab. (BN↗
Investigation of the Effect of Atmospheric Plasma Treatment in Nanofiber and Nanocomposite Membranes for Piezoelectric Applications
In this work, we report the effect of steady-state atmospheric plasma (Corona discharge) in nanofibers and nanocomposite membranes for piezoelectric applications. The investigation was performed in PVDF (Poly vinylidene fluoride) nanofibers, CNT (Carbon Nanotubes)-reinforced PVDF nanocomposites, and PAN (Poly acrylonitrile) nanofiber membranes. Steady-state plasma was generated with a high voltage power source with 1 mA discharge current output and 6 kV discharge voltage, and the gap between tip and the material was maintained to be 1 cm. For the fabrication of nanofibers and nanocomposite membranes, an electrospinning method was used. The electrospinning parameters, such as flow rate and voltage, were optimally tuned for obtaining uniform nanofibers and nanomembranes. Along with the plasma treatment, heat treatment above the glass transition temperature was also conducted on the nanofiber membranes. Using a Scanning Electron Microscope (SEM), the morphology of the nanofibers was observed. X-ray Diffraction (XRD) demonstrated the polycrystallinity of the nanofibers. Fourier Transform Infrared Spectroscopy (FTIR) analysis of the PVDF nanofibers shows a peak at 796 cm−1 representing α-phase (C-H rocking) in the control sample which is absent in the treated samples. Raman spectroscopy of PVDF nanofibers identifies a Raman shift from 873 cm−1 to 877 cm−1 (denoting β-phase) for plasma-treated samples only. Electron Paramagnetic Resonance (EPR) concludes that the intensity of the free radicals increases from 1.37 to 1.46 (a.u.) after plasma treatment. Then, sensors were fabricated from the PVDF nanofibers, MWCNT-reinforced PVDF nanofibers, and PAN nanofibers to characterize their piezoelectric properties. The impact test results showed that the atmospheric plasma and heat-treated samples had 86%, 277%, and 92% increases of the d33 value (piezoelectric coefficient) in the case of PVDF nanofibers, MWCNT-reinforced nanofibers, and PAN nanofibers, respectively. It was also observed that the capacitance of the nanofiber membranes has increased due to the plasma treatment.
Biochemistry & Molecular Biology↗
Microstructural, optical and electrical properties of CdS thin films grown by spray pyrolysis technique as a function of substrate temperature
In this research, nanocrystalline cadmium sulfide thin films were produced by the spray pyrolysis technique on glass substrates. The effects of substrate temperature in the range 400–550 °C on the structural, morphological, optical, and electrical properties of the thin films were investigated. The thin films have been characterized by investigating their X-ray diffraction, field emission scanning electron microscope (FE-SEM), and optical absorption (UV–Vis) measurements. X-ray analysis revealed that thin films were a polycrystalline structure with the hexagonal phase in all cases and by increasing in substrate temperature, crystallite size decreases, and dislocation density increases. The FE-SEM images showed that the surface of the thin films is uniform, homogeneous and without cracks. The average sizes of the grains are at the range of 210–235 nm. The obtained values for optical band gap have been in the range of 2.18–2.41 eV, where the value of optical band gap for the thin films decreases by increasing substrate temperature. The Urbach energies of the thin films increase as the substrate temperature is increased. When substrate temperature increased from 400 to 550 °C, electrical resistivity increased from 531 to 2817 Ω cm, carrier concentration decreased from 15.96 × 10{sup 14} to 3.71 × 10{sup 14} cm{sup −3}, Hall mobility decreased from 7.37 to 5.98 cm{sup 2}/V s. Hall effect analysis indicated that the thin films exhibited n-type conductivity.
77 NANOSCIENCE AND NANOTECHNOLOGY↗
Modifying magnetic properties of MnBi with carbon: an experimental and theoretical study
MnBi and MnBi-based materials have been investigated as prospective rare-earth-free permanent magnets with moderate energy product. One of the main issues with MnBi synthesis is the presence of residual Bi in the sample which reduces the net magnetization. Here, we have found that MnBi synthesized in the presence of carbon substantially reduces the amount of residual Bi, improving its saturation magnetization. We have synthesized Mn 55 Bi 45 and Mn 55 Bi 45 C x samples using arc melting and high-vacuum annealing. The room temperature x-ray diffraction patterns indicate that both Mn 55 Bi 45 and Mn 55 Bi 45 C x crystallize in the hexagonal NiAs-type structure. The Rietveld analysis of the x-ray patterns shows that the amount of residual Bi reduces from 16 wt.% for Mn 55 Bi 45 to 5 wt.% for Mn 55 Bi 45 C x . The high-field (3 T) magnetizations measured at room temperature are 61 emu g –1 and 66 emu g –1 for Mn 55 Bi 45 and Mn 55 Bi 45 C x , respectively. To understand the role of C in enhancing the magnetization of MnBi, we carried out the first-principles calculations of both stoichiometric and nonstoichiometric MnBi alloys, which suggests that the increase of magnetization in Mn 55 Bi 45 C x may be due to the coating of MnBi grains with C.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Hydroxyapatite/TiO 2 Nanomaterial with Defined Microstructural and Good Antimicrobial Properties
Due to the growing number of people infected with the new coronavirus globally, which weakens immunity, there has been an increase in bacterial infections. Hence, knowledge about simple and low-cost synthesis methods of materials with good structural and antimicrobial properties is of great importance. A material obtained through the combination of a nanoscale hydroxyapatite material (with good biocompatibility) and titanium dioxide (with good degradation properties of organic molecules) can absorb and decompose bacteria. In this investigation, three different synthesis routes used to prepare hydroxyapatite/titanium dioxide nanomaterials are examined. The morphology and semiquantitative chemical composition are characterized by scanning electron microscopy with energy dispersive X-ray analysis (SEM-EDX). The obtained materials’ phase and structural characterization are determined using the X-ray powder diffraction method (XRD). The crystallite sizes of the obtained materials are in the range of 8 nm to 15 nm. Based on XRD peak positions, the hexagonal hydroxyapatite phases are formed in all samples along with TiO 2 anatase and rutile phases. According to SEM and TEM analyses, the morphology of the prepared samples differs depending on the synthesis route. The EDX analysis confirmed the presence of Ti, Ca, P, and O in the obtained materials. The IR spectroscopy verified the vibration bands characteristic for HAp and titanium. The investigated materials show excellent antimicrobial and photocatalytic properties.
60 APPLIED LIFE SCIENCES↗
Spin Reorientation in Antiferromagnetic MnPd 5 Se with an Anti-CeCoIn 5 Structure Type
MnPd 5 Se, a derivative of the anti-CeCoIn 5 -type phase, was synthesized from a high-temperature solid-state reaction, structurally determined by X-ray diffraction, and magnetically characterized with a combined magnetic measurement and neutron powder diffraction (NPD). According to the X-ray diffraction results, MnPd 5 Se crystallizes in a layered tetragonal structure with the same space group as CeCoIn 5 , P4/mmm (No. 123). MnPd5Se shows antiferromagnetic ordering around 80 K on the basis of the magnetic property measurements. An A-type antiferromagnetic structure was revealed from the analysis of neutron powder diffraction results at 300, 50, and 6 K. Moreover, a spin orientation rotation was observed as the temperature decreased. Pd L 3 X-ray absorption near edge spectroscopy results for MnPd5Se semiqualitatively correlate with the calculated density of states supporting a nominal 0.2 electron transfer into the Pd d orbital from either Se or Mn in the compound. The discovery of MnPd 5 Se, along with our previously reported MnT 5 Pn (T = Pd or Pt; Pn = P or As), provides a tunable system for studying the magnetic ordering from ferromagnetism to antiferromagnetism with the strong spin–orbit coupling effect.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Nanohybrid of Silver‐MXene: A Promising Sorbent for Iodine Gas Capture from Nuclear Waste
The increasing reliance on nuclear energy as a significant low-carbon power source necessitates effective solutions for managing radioactive emissions. This study introduces a novel application of MXene nanohybrids, specifically silver-MXene (Ag-Ti 3 C 2 T x ), as an effective sorbent for radioiodine off-gas capture at an operating temperature of 150 °C. Through comprehensive material characterization, including X-ray diffraction, scanning and transmission electron microscopies, energy-dispersive X-ray spectroscopy, Raman spectroscopy, thermogravimetric analysis, inductively coupled plasma optical emission spectroscopy, and gas sorption analyses, the successful loading of Ag nanoparticles onto Ti 3 C 2 T x is confirmed and the subsequent formation of AgI upon iodine capture. The results demonstrate that Ag-Ti 3 C 2 T x exhibits superior iodine uptake compared to traditional silver-based sorbents such as silver mordenite zeolite (AgZ) and silver-functionalized silica aerogel (AgAero). The Ag-Ti 3 C 2 T x achieves an iodine loading of 946 mg g −1 , significantly outperforming AgZ (131 mg g −1 ). These findings highlight the potential of Ag-Ti 3 C 2 T x as a highly efficient, thermally stable sorbent for radioiodine capture, and potentially addressing key limitations of existing materials.
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
Vanadium (II) Sulfate for the Reductive Leaching of Chalcopyrite: Replacing Smelting with Electrolysis for Copper Production
The demand for copper is expected to outpace supply in the coming decades due in part to the emergence of wind and solar technologies, which require about five times as much copper as traditional energy sources. This work introduces a potentially transformative hydrometallurgical process to extract copper from chalcopyrite, and thereby sustain a high rate of copper production throughout the 21 st century. Chalcopyrite is reacted with vanadium (II) sulfate for the first time to enable the rapid, clean, and complete recovery of copper. Reactions between 39 g/L copper concentrate, 1 M vanadium (II) sulfate, and various concentrations of sulfuric acid yielded a final product of solid copper sulfate, which was characterized by X-ray diffraction (XRD) and scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS) analysis. The solid products were leached in a subsequent step to demonstrate copper yields ranging from 95–99%. The vanadium (II) ion may be regenerated by an electrolysis unit that leverages advances in vanadium flow battery technologies.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
An insight into microscopy and analytical techniques for morphological, structural, chemical, and thermal characterization of cellulose
Cellulose obtained from plants is a bio-polysaccharide and the most abundant organic polymer on earth that has immense household and industrial applications. Hence, the characterization of cellulose is important for determining its appropriate applications. In this article, we review the characterization of cellulose morphology, surface topography using microscopic techniques including optical microscopy, transmission electron microscopy, scanning electron microscopy, and atomic force microscopy. Additionally, other physicochemical characteristics like crystallinity, chemical composition, and thermal properties are studied using techniques including X-ray diffraction, Fourier transform infrared, Raman spectroscopy, nuclear magnetic resonance, differential scanning calorimetry, and thermogravimetric analysis. This review may contribute to the development of using cellulose as a low-cost raw material with anticipated physicochemical properties.
59 BASIC BIOLOGICAL SCIENCES↗
Local Inversion Symmetry Breaking and Thermodynamic Evidence for Ferrimagnetism in Fe 3 GaTe 2
The layered compound Fe 3 GaTe 2 is attracting attention due to its high Curie temperature, low dimensionality, and the presence of topological spin textures above room temperature, making Fe 3 GaTe 2 a good candidate for applications in spintronics. Here, in this study, we show, through transmission electron microscopy (TEM) techniques, that Fe 3 GaTe 2 single crystals break local inversion symmetry while maintaining global inversion symmetry according to X-ray diffraction. Coupled to the observation of Néel skyrmions via Lorentz-TEM, our structural analysis provides a convincing explanation for their presence in centrosymmetric materials. Magnetization measurements as a function of the temperature displays a sharp first-order thermodynamic phase-transition leading to a reduction in the magnetic moment. This implies that the ground state of Fe 3 GaTe 2 is globally ferrimagnetic and not a glassy magnetic state composed of ferrimagnetic, and ferromagnetic domains as previously claimed. Neutron diffraction studies indicate that the ferromagnetic to ferrimagnetic transition upon reducing the external magnetic field is associated with a change in the magnetic configuration/coupling between Fe1 and Fe2 moments. We observe a clear correlation between the hysteresis observed in both the skyrmion density and the magnetization of Fe 3 GaTe 2 . This indicates that its topological spin textures are affected by the development of ferrimagnetism upon cooling. Observation, via magnetic force microscopy, of magnetic bubbles at the magnetic phase boundary suggests skyrmions stabilized by the competition among magnetic phases and distinct exchange interactions. Our study provides an explanation for the observation of Néel skyrmions in centrosymmetric systems, while exposing a correlation between the distinct magnetic phases of Fe 3 GaTe 2 and topological spin textures.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Quantifying the reaction mechanisms of a high-capacity CuP 2 /C composite anode for potassium ion batteries
Introducing metals into phosphorus to form metal phosphide materials as anodes for potassium ion batteries (PIBs) is an effective strategy to improve the electronic conductivity and alleviate the volume change during cycling, although with a compromise of capacity. Here in this paper, we explore a CuP 2 /C composite as a novel anode for PIBs, which delivers a high reversible capacity of >450 mA h g -1 . Unexpectedly, our results reveal that the POx components existing in the prepared composite are reversible, through a quantitative analysis via high-resolution solid-state 31 P NMR and synchrotron X-ray diffraction tests. Their potassiation products K 3 PO 4 and K 4 P 2 O 7 can react with K–P alloys and turn back to PO x during depotassiation, which probably accounts for the high capacity of the prepared material. The results also illustrate a crystallization–amorphization evolution process during cycling involving nanocrystalline α-K 4 P 6 , K 4 P 3 and KP, and amorphous K 4 P 6 , KP and K 3 P phases, among which, the amorphous phases are identified for the first time.
25 ENERGY STORAGE↗