Search NASA⌕ Search

SEARCH · Search NASA

Results for “aqueous processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Probing air-water interfaces of dibutyl phosphoric acid (HDBP) aqueous solutions using vibrational sum frequency generation (vSFG) spectroscopy

Liquid-liquid extraction is a separation technique implemented in a wide variety of areas, achieving particular success in both the nuclear and biomedical fields. In this work, vibrational sum frequency generation spectroscopy (VSFG) and surface tension measurements were used to investigate the adsorption of dibutyl phosphate (DBP) at air-aqueous interfaces to simulate liquid-liquid systems relevant to the Plutonium Uranium Redox Extraction (PUREX) Process. The objective of this work is to establish qualitative relationships between changes in the bulk aqueous phase concentrations of DBP and its concentration and structure at air-liquid interface as probed with VSFG. Nitric acid concentration and solution ionic strength were varied to examine their effect on the interfacial DBP.. Introduction of DBP into neat water resulted in reduction of the VSFG spectral intensity in the dangling O-H region (3680 – 3800 cm -1 ) but large increase in the H-bonded O-H stretch frequency region (3000 – 3500 cm-1) and the appearance of the CH 3 symmetric stretch and CH 3 Fermi resonance peaks at ~ 2880 and 2945 cm -1 , respectively, indicating DBP at the air-water interface. The intensity of the C-H strecth peaks increased as DBP concentration increased from 0.24 to 32 mM, accompanied by a decreasing surface tension values. At fixed DBP concentration, the addition of either or both of HNO 3 and NaNO 3 to an ionic strength of 1 M or 3 M led to significant reduction of the O-H VSFG peaks and enhancement of the C-H peaks. The origins of these experimental observations are attributed to both the increased HDBP molecules partitioning and adsorption to the interface and the protonation of the interfacial DBP- molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CH 2 Cl 2 + OH - Reaction in Aqueous Solution: A Combined Quantum Mechanical and Molecular Mechanics Study

The CH 2 Cl 2 + OH - reaction in aqueous solution was investigated using combined quantum mechanical and molecular mechanics approach. We present analysis of the reactant, transition, and product state structures, and calculate the free energy reaction profile through the CCSD(T) level of the theory for the reactive region. Our results show that the aqueous environment has a significant impact on the reaction process raising the reaction barrier by ~17 kcal/mol and the reaction energy by ~20 kcal/mol. While solvation effects play a predominant role, we also find sizable contributions from solvent-induced polarization effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Static and Dynamic Gradient Based Directional Transportation of Neutral Molecules in Swollen Polymer Films

Abstract Materials which selectively transport molecules offer powerful opportunities for concentrating and separating chemical agents. Here, utilizing static and dynamic chemical gradients, transport of molecules within swollen crosslinked polymers is demonstrated. Using an ≈200 μm static hydroxyl to hexyl gradient, the neutral ambipolar nerve agent surrogate diethyl (cyanomethyl)phosphonate (DECP) is directionally transported and concentrated 60‐fold within 4 hours. To accelerate transport kinetics, a dynamic gradient (a “travelling wave”) is utilized. Here, the non‐polar dye pyrene was transported. The dynamic gradient is generated by an ion exchange process triggered by the localized introduction of an aqueous NaCl solution, which converts the gel from hydrophobic to hydrophilic. As the hydrophilic region expands, associated water enters the gel, and pyrene is pushed ahead of the expansion front. The dynamic gradient provides about 10‐fold faster transport kinetics than the static gradient.

Ali, Mohammad A.↗

Static and Dynamic Gradient Based Directional Transportation of Neutral Molecules in Swollen Polymer Films

Abstract Materials which selectively transport molecules offer powerful opportunities for concentrating and separating chemical agents. Here, utilizing static and dynamic chemical gradients, transport of molecules within swollen crosslinked polymers is demonstrated. Using an ≈200 μm static hydroxyl to hexyl gradient, the neutral ambipolar nerve agent surrogate diethyl (cyanomethyl)phosphonate (DECP) is directionally transported and concentrated 60‐fold within 4 hours. To accelerate transport kinetics, a dynamic gradient (a “travelling wave”) is utilized. Here, the non‐polar dye pyrene was transported. The dynamic gradient is generated by an ion exchange process triggered by the localized introduction of an aqueous NaCl solution, which converts the gel from hydrophobic to hydrophilic. As the hydrophilic region expands, associated water enters the gel, and pyrene is pushed ahead of the expansion front. The dynamic gradient provides about 10‐fold faster transport kinetics than the static gradient.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spontaneous Stepwise Self-Assembly of a Polyoxometalate-Organic Hybrid into Catalytically Active One-Dimensional Anisotropic Structures

An inorganic–organic hybrid surfactant with a hexavanadate cluster as the polar head group was designed and observed to assemble into micelle structures, which further spontaneously coagulate into a 1D anisotropic structure in aqueous solutions. Such a hierarchical self-assembly process is driven by the cooperation of varied noncovalent interactions, including hydrophobic, electrostatic, and hydrogen-bonding interactions. The hydrophobic interaction drives the quick formation of the micelle structure; electrostatic interactions involving counterions leads to the further coagulation of the micelles into larger assemblies. This process is similar to the crystallization process, but the specific counterions and the directional hydrogen bonding lead to the 1D growth of the final assemblies. Since most of the hexavanadates are exposed to the surface, the 1D assembly with nanoscale thickness is a highly efficient heterogeneous catalyst for the oxidation of organic sulfides with appreciable recyclability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Promoting microbial utilization of phenolic substrates from bio-oil

Abstract The economic viability of the biorefinery concept is limited by the valorization of lignin. One possible method of lignin valorization is biological upgrading with aromatic-catabolic microbes. In conjunction, lignin monomers can be produced by fast pyrolysis and fractionation. However, biological upgrading of these lignin monomers is limited by low water solubility. Here, we address the problem of low water solubility with an emulsifier blend containing approximately 70 wt% Tween® 20 and 30 wt% Span® 80. Pseudomonas putida KT2440 grew to an optical density (OD600) of 1.0 ± 0.2 when supplied with 1.6 wt% emulsified phenolic monomer-rich product produced by fast pyrolysis of red oak using an emulsifier dose of 0.076 ± 0.002 g emulsifier blend per g of phenolic monomer-rich product. This approach partially mitigated the toxicity of the model phenolic monomer p-coumarate to the microbe, but not benzoate or vanillin. This study provides a proof of concept that processing of biomass-derived phenolics to increase aqueous availability can enhance microbial utilization.

09 BIOMASS FUELS↗

Nanosized carriers for hydrophobic compounds based on mesoporous silica: synthesis and adsorption properties

MCM-41 type mesoporous silica particles were obtained using a template method in an alkaline medium and cetyltrimethylammonium bromide as a matrix. The structural and adsorption characteristics of the mesoporous material were studied by dynamic light scattering, scanning electron microscopy, low-temperature adsorption—desorption of nitrogen, IR spectroscopy, and simultaneous thermal analysis. It was shown that the obtained mesoporous material possesses high porosity with the specific pore volume in excess of 1 cm{sup 3} g{sup −1}. It was established that the size of silica particles does not exceed 200 nm, which is a value acceptable for the penetration of drugs through cell membranes. The optimal compositions of aqueous dispersions of MCM-41 with minimal sedimentation processes were determined. A drug (indomethacin) was encapsulated into the silica pores using the precipitation method at various temperatures (40 and 60 °C), the quantitative parameters of loading efficiency were calculated. The infl uence of temperature on the encapsulation ability was demonstrated.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Beta-Amino Carboxylate (BAC) non-aqueous physical solvents for enhanced CO2 separations in pre-combustion carbon capture, industrial CO 2 capture, and biogas upgrading processes

Novel beta-amino carboxylate (BAC) solvents have been synthesized and tested to efficiently capture carbon dioxide (CO 2 ) from process gas streams with CO 2 partial pressure intermediate between pre-combustion and post-combustion capture. The BAC solvents have molecular structures characterized by alkyl-substituted amides or esters containing a secondary amine functional group on the second carbon from the carbonyl carbon (referred to as the beta “β” carbon). The ester or amide functional group combined with optimal steric crowding around the amine nitrogen by proximate alkyl groups are tailored to modify the strength of CO 2 binding in the solvent. The solvents possess high CO 2 solubilities and high gas selectivity including good CO 2 /H 2 O selectivity and can be utilized for CO 2 absorption over a range of partial pressures. Due to low volatility, many of the solvents can be operated at or above ambient temperature which eliminates solvent chilling and allows regeneration using low grade waste heat. These novel solvents offer an opportunity for efficient carbon capture for a range of applications including biogas upgrading, hydrogen production, and pre-combustion carbon capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct Conversion of Biomass Carbohydrates to Platform Chemicals: 5-Hydroxymethylfurfural (HMF) and Furfural

5-hydroxymethylfurfural (HMF) and furfural are promising platform molecules which can be converted to fuel intermediates and hydrocarbon fuels. Herein, one-step, direct conversion of the carbohydrates in never treated biomass to HMF and furfural in a microwave reactor was investigated. The influence of reaction temperature, time, feedstock, addition of Lewis and Bronsted acids, solvent and solvent to aqueous ratio were studied to find the optimum process conditions to maximize the yields of furfurals. The reaction conditions of 200 degrees C for 5 min with 33 mM HCl and 8 mM AlCl 3 using a dioxane/water (4:1) miscible solvent system were found to be the most conducive for direct dehydration of the glucan and hemicelluloses present in untreated poplar wood to furfural and HMF in yields of 91 and 69%, respectively. Furfural could be easily produced in yields greater than 80%, and once formed, it was found to be stable under the various process conditions explored. In contrast, HMF yields varied with both reaction time and temperature, as it readily underwent rehydration to levulinic acid in yields approaching 25-30% at increased reaction severity. The additions of both Bronsted (HCl) and Lewis (AlCl 3 ) acids in catalytic amounts, i.e., 33 and 8 mM, respectively, were required to maximize the yield of furfurals. Reactions were also performed on other feedstocks (corn stover, switchgrass, loblolly pine, and pure cellulose) to investigate the effect of feedstock type on furfurals yields. Results showed that HMF and furfural yields were primarily dependent on hexosan and pentosan loading regardless of the type of feedstock. In addition, biomass physical features, such as crystallinity or the presence of other biomass constituents, such as lignin, had little influence on furfurals yields.

09 BIOMASS FUELS↗

Stabilization of an Unprecedented Hexanuclear Secondary Building Unit in a Thorium-Based Metal–Organic Framework

The crystal structures of thorium clusters are important for understanding the formation and transformation mechanisms of actinide species in solution, which can in turns benefit nuclear waste processing and management. However, stabilizing thorium clusters in aqueous solution is quite challenging because of their fast olation and oxolation reactions. Here, we report a thorium-based meta-organic framework, NU-905, with the formula [Th 6 (μ 3 -O) 2 (HCOO) 4 (H 2 O) 6 ] [TCPP = tetrakis(4-carboxyphenyl)porphyrin], synthesized by a solvothermal reaction in N,N-dimethylformamide and water at 120 °C. NU-905 contains a hexanuclear secondary building unit (SBU), [Th 6 (μ 3 -O) 2 (HCOO) 4 (H 2 O) 6 ], which has never been reported previously. The SBUs are capped and bridged by the tetratopic linker TCPP to form a three-dimensional network with scu topology. The activated NU-905 exhibits permanent porosity and shows high catalytic activity for the selective photooxidation of a mustard gas simulant.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polymer-Grafted Cellulose Nanofibrils with Enhanced Interfacial Compatibility for Stronger Poly(lactic acid) Composites

Cellulose nanofibrils (CNFs) are a promising reinforcement for biodegradable composite matrices such as poly(lactic acid) (PLA), but they require commercially scalable drying methods that preserve their fibrillar morphology along with improved interfacial interactions with polymer matrices. In this work, a water-based grafting-through polymerization scheme to modify CNFs improved spray drying behavior and reinforcement capacity in PLA composites. All polymer modifications yielded CNFs with a more fibrillar morphology after spray drying, increasing specific surface area by up to 490% compared to unmodified CNFs, values similar to conventional freeze drying. Polymer-grafted CNFs in PLA composites improved the tensile strength by 16% at 20 wt % loading and stiffness by 22% at a 10 wt % loading with two different graft-polymer chemistries compared to unmodified CNF composites. Surface energy heterogeneity measurements of the reinforcements and PLA matrix were employed to understand the improvements in composite properties. Polymer modifications lowered the total surface energy of the CNFs, and calculated ratios of work of adhesion to work of cohesion suggested improved interfacial compatibility for four of the modified CNFs with PLA. Rheological oscillatory shear studies of the composites correlated solid-like melt behavior, as demonstrated by storage moduli dominance, with higher tensile strength. Thermal analysis of the composites revealed that excessive plasticization by the poly(oligoethylene glycol methyl ether methacrylate)-grafted sample potentially offset mechanical property improvements imparted by the more fibrillar morphology. This work provides an opportunity for large-scale manufacturing of CNF/PLA composites via an entirely aqueous modification scheme and industrially relevant spray drying process.

36 MATERIALS SCIENCE↗

Partitioning of HCl Between Concentrated Brines and Supercritical CO 2 Under Geologic Reservoir Conditions

HCl is generated in subsurface brines exposed to high CO 2 pressures via reactions such as CO 2 + NaCl + H 2 O ↔ NaHCO 3 + HCl. The extent of partitioning of HCl between a concentrated chloride brine and supercritical CO 2 (scCO 2 ) has not been measured before and it cannot be estimated with the accuracy sufficient for predictive modeling of subsurface processes. The partitioning of HCl between 4.92 mol/kg aqueous solutions of NaCl and scCO 2 was measured at 100 and 150 °C and at pressures between 9 and 16.2 MPa. At P = 15 MPa, the concentrations of HCl in the scCO 2 phase were 7 × 10 –4 and 4 × 10 –3 mol/L at 100 and 150 °C, an increase by more than 5 and 3 orders of magnitude, respectively, relative to the concentrations in water vapor in the absence of CO 2 . Furthermore, these levels of HCl may accelerate reactions with reservoir rocks, natural seals (shale caprocks) and downhole materials, potentially enhancing or impairing operation and long-term performance of subsurface technologies such as geologic carbon sequestration/storage, enhanced geothermal systems using compressed CO 2 , and scCO 2 extraction of hydrocarbons, and other resources in the presence of chloride brines.

58 GEOSCIENCES↗

Comparison of parameter sensitivities between a laboratory and field scale model of uranium transport in a dual domain, distributed-rate reactive system

A laboratory-derived conceptual and numerical model for U(VI) transport at the Hanford 300A site, Washington, USA, was applied to a range of field-scale scenarios of different complexity to systematically evaluate model parameter sensitivities. The model, originally developed from column experiment data, included distributed-rate surface complexation kinetics of U(VI), aqueous speciation, and physical non-equilibrium transport processes. A rigorous parameter sensitivity analysis was carried out with respect to different state variables: concentrations, mass fluxes, total mass and spatial moments of dissolved U(VI) for laboratory systems, and various simulation scenarios that represented the field-scale characteristics at the Hanford 300A site. The field-scenarios accounted for transient groundwater flow and variable geochemical conditions driven by frequent water level changes of the nearby Columbia River. Simulations indicated that the transient conditions significantly affected U(VI) plume migration at the site. The parameter sensitivities were largely similar between the laboratory and field scale systems. Where differences existed, they were shown to result from differing degrees of U(VI) adsorption disequilibrium caused by hydraulic or hydrogeochemical conditions. Adorption disequilibrium was found to differ (i) between short duration peak flow events at the field scale and much longer flow events in the laboratory, (ii) for changing groundwater chemical compositions due to river water intrusion, and (iii) for different sampling locations at the field scale. Parameter sensitivities were also found to vary with respect to the different investigated state variables. An approach is demonstrated that elucidates the most important parameters of a laboratory-scale model that must constrained in both the laboratory and field for meaningful field application.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Progress on ternary oxide-based photoanodes for use in photoelectrochemical cells for solar water splitting

Solar water splitting using photoelectrochemical cells (PECs) has emerged as one of the most promising routes to produce hydrogen as a clean and renewable fuel source. Among various semiconductors that have been considered as photoelectrodes for use in PECs, oxide-based photoanodes are particularly attractive because of their stability in aqueous media in addition to inexpensive and facile processing compared to other types of semiconductors. However, they typically suffer from poor charge carrier separation and transport. In the past few years, there has been tremendous progress in developing ternary oxide-based photoelectrodes, specifically, photoanodes. The use of ternary oxides provides more opportunities to tune the composition and electronic structure of the photoelectrode compared to binary oxides, thus providing more freedom to tune the photoelectrochemical properties. In this article, we outline the important characteristics to analyze when evaluating photoanodes and review the major recent progress made on the development of ternary oxide-based photoanodes. For each system, we highlight the favorable and unfavorable features and summarize the strategies utilized to address the challenges associated with each material. Finally, by combining our analyses of all the photoanodes surveyed in this review, we provide possible future research directions for each compound and an outlook for constructing more efficient oxide-based PECs. Overall, this review will provide a critical overview of current ternary oxide-based photoanodes and will serve as a platform for the design of future oxide-based PECs.

25 ENERGY STORAGE↗

DEHP− extractant binding to trivalent lanthanide Er3+: Fast binding accompanied by concerted angular motions of hydration water

Solvent extraction of trivalent rare earth metal ions by organophosphorus extractants proceeds via binding of phosphoric acid headgroups to the metal ion. Water molecules in the tightly bound first hydration shell of the metal ions must be displaced by oxygen atoms from phosphoric acid headgroups. Here, we use classical molecular dynamics simulations to explore the event in which a fully hydrated Er3+ binds to its first phosphoric acid headgroup. Approach of the headgroup into the region between the first and second hydration shells leads to a fast ejection of a water molecule that is accompanied by reordering of the hydration water molecules, including discretization of their angular positions and collective rotation about the metal ion. The water molecule ejected from the first shell is located diametrically opposite from the binding oxygen. Headgroup binding places a headgroup oxygen closer to Er3+ than its first hydration shell and creates a loosely bound water that subsequently exchanges between the first shell and its environment. This second exchange of water also occurs at discrete angular positions. This geometrical aspect of binding may be of relevance to understanding the binding and transport of ion–extractant complexes that are expected to occur at the organic–aqueous liquid–liquid interface used in solvent extraction processes.

Chemistry↗

Review of Options for Ammonia/Ammonium Management

This report is a review of literature supporting practical ammonia/ammonium destruction processes. Melter research supporting Hanford Low Activity Waste (LAW) glass production has shown that significant amounts of ammonia will be in the melter offgas condensate. Further work with secondary waste forms indicates the potential need to remove the ammonia, perhaps by an oxidative process. This review finds likely practical chemical methods to oxidize ammonia in aqueous solution at moderate temperatures and atmospheric pressure, using easily obtained reagents. Leading candidates include nitrite oxidation to produce nitrogen gas, various peroxide oxidative processes, and air stripping. This work reviews many other processes and provides reasoning to not consider those processes further for this application.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

High Density Nano-Electrode Array for Radiation Detection

Bulk single crystals of Cd1-xZnxTe (x=0.04 to x=0.2) compound semiconductor is used for room temperature radiation detection. The production of large volume of Cd1-xZnxTe with low defect density is expensive. As a result there is a growing research interest in the production of nanostructured compound semiconductors such as Cd1-xZnxTe in an electrochemical route. In this investigation, Cd1-xZnxTe ternary compound semiconductor, referred as CZT, was electrodeposited in the form of nanowires onto a TiO2 nanotubular template from propylene carbonate as the non-aqueous electrolyte, using a pulse-reverse electrodeposition process at 130 ºC. The template acted as a support in growing ordered nanowire of CZT which acts as a one dimensional conductor. Cyclic Voltammogram (CV) studies were conducted in determining the potentials for the growth of nanowires of uniform stoichiometry. The morphologies and composition of CZT were characterized by using SEM, TEM and XRD. The STEM mapping carried out on the nanowires showed the uniform distribution of Cd, Zn and Te elements. TEM image showed that the nanowires were polycrystalline in nature. The Mott-Schottky analysis carried on the nanowires showed that the nanowires were a p-type semiconductor. The carrier density, band gap and resistivity of the Cd0.9Zn0.1Te nanowires were 4.29x1013 cm-3, 1.56 eV and 2.76x1011Ω-cm respectively. The high resistivity was attributed to the presence of deep defect states such as cadmium vacancies or Te antisites which were created by the anodic cycle of the pulse-reverse electrodeposition process. Stacks of series connected CZT nanowire arrays were tested with different bias potentials. The background current was in the order of tens of picoamperes. When exposed to radiation source Amerecium-241 (60 KeV, 4 μCi), the stacked CZT nanowires arrays showed sensing behavior. The sensitivity of the nanowire arrays increased as the number of stacks increased. The preliminary results indicate that the CZT nanowire arrays can be used as a potential X-ray and low energy gamma ray detector material at room temperature with a much low bias potential (0.7 – 4V) as against 300 – 500 V applied in the commercial bulk detector materials.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗