Search NASA⌕ Search

SEARCH · Search NASA

Results for “bedding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Measurement of pyrolysis products from mixed fuel beds during fires in a wind tunnel

Pyrolysis of intact wildland fuels in the southern United States is being measured at bench, wind tunnel, and field scales as part of a larger research project to measure and model pyrolysis of wildland fuels to improve models used to predict prescribed fire behavior. Traditional pyrolysis experiments typically use dried, ground samples in either an inert or oxidizing environment subject to uniform heating and heat transfer. Fletcher and others are presenting results of pyrolysis experiments using a flat-flame burner to heat intact foliage from 14 species of plants native to the southern U.S. at this conference. The fuel beds in prescribed burns in southern pine forests are composed of a mixture of dead pine needles and a large variety of herbaceous and woody plants. We have burned 73 fuel beds composed of Pinus palustris needles and mixtures of Lyonia lucida, Ilex glabra, and Vaccinium darrowii plants in a wind tunnel facility with and without a moderate wind speed of ~ 1 m s-1. The flame from the spreading fire is the heat source for the pyrolysis experiment. Canister samples of pyrolysis and flaming combustion gases within the fuel bed have been collected for offline analysis. Open path spectrometers nonintrusively measured composition of pyrolysis gases in real-time. Thermocouples, a Schmidt-Boelter heat flux sensor, a nadir thermal IR camera, and background-oriented Schlieren photography estimated heat transfer and air flow around the plants. This presentation will present results of this ongoing work.

pyrolysis, longleaf, fetterbush, inkberry, sparkle↗

Influence of Sedimentary Bedding on Reactive Transport Parameters under Unsaturated Conditions

Moisture and contaminant transport in partially saturated, heterogeneous, layered sediments is typically anisotropic. Solute transport parameters, including dispersivity and the adsorption coefficient, and the modeled concentration of reactive minerals may depend on the direction of flow with respect to sedimentary layering. Reaction rates, in contrast, should be independent of flow direction. We determined the influence of flow direction on transport parameters for nonreactive (Br{sup -}) and reactive (cobalt ethylenediaminetetraacetic acid [Co(II)EDTA{sup 2-}]) solutes under partially saturated conditions by imposing flow either parallel to or across sedimentary bedding in 11 intact sediment cores of various textures. Higher dispersivity of nonreactive tracers in parallel-bed cores suggested fluid channeling through permeable layers, while low-conductivity layers dampened channeling in cross-bed samples. Rates of transformation of Co(II)EDTA{sup 2-} into Co(III)EDTA{sup -} and of disassociation of Co{sup 2+} and EDTA{sup 4-} were modeled assuming that the reaction rates were independent of the flow direction. The concentration of Mn oxides that was responsible for the transformation reaction was dependent on the flow direction, which governed the extent of contact between the solution and the solid phase. Similarly, the adsorption constants of Co(II)EDTA{sup 2-} and Co(III)EDTA{sup -} were dependent on the flow direction but were also unique for each experiment. The modeled concentration of reactive minerals was the most sensitive parameter describing the reaction and transformation of Co(II)EDTA{sup 2-}.

54 ENVIRONMENTAL SCIENCES↗

Effect of filter media thickness on the performance of sand drying beds used for faecal sludge management

Here the effect of sand filter media thickness on the performance of faecal sludge (FS) drying beds was determined in terms of: dewatering time, contaminant load removal efficiency, solids generation rate, nutrient content and helminth eggs viability in the dried sludge. A mixture of ventilated improved pit latrine sludge and septage in the ratio 1:2 was dewatered using three pilot-scale sludge drying beds with sand media thicknesses of 150, 250 and 350 mm. Five dewatering cycles were conducted and monitored for each drying bed. Although the 150 mm filter had the shortest average dewatering time of 3.65 days followed by 250 mm and 350 mm filters with 3.83 and 4.02 days, respectively, there was no significant difference (p > 0.05) attributable to filter media thickness configurations. However, there was a significant difference for the percolate contaminant loads in the removal and recovery efficiency of suspended solids, total solids, total volatile solids, nitrogen species, total phosphorus, chemical oxygen demand, dissolved chemical oxygen demand and biochemical oxygen demand, with the highest removal efficiency for each parameter achieved by the 350 mm filter. There were also significant differences in the nutrient content (NPK) and helminth eggs viability of the solids generated by the tested filters. Finally, filtering media configurations similar to 350 mm have the greatest potential for optimising nutrient recovery from FS.

54 ENVIRONMENTAL SCIENCES↗

Reuse of Produced Water from CO 2 Enhanced Oil Recovery, Coal-Bed Methane, and Mine Pool Water by Coal-Based Power Plants

Power generation in the Illinois Basin is expected to increase by as much as 30% by the year 2030, and this would increase the cooling water consumption in the region by approximately 40%. This project investigated the potential use of produced water from CO 2 enhanced oil recovery (CO 2 -EOR) operations; coal-bed methane (CBM) recovery; and active and abandoned underground coal mines for power plant cooling in the Illinois Basin. Specific objectives of this project were: (1) to characterize the quantity, quality, and geographic distribution of produced water in the Illinois Basin; (2) to evaluate treatment options so that produced water may be used beneficially at power plants; and (3) to perform a techno-economic analysis of the treatment and transportation of produced water to thermoelectric power plants in the Illinois Basin. Current produced water availability within the basin is not large, but potential flow rates up to 257 million liters per day (68 million gallons per day (MGD)) are possible if CO 2 -enhanced oil recovery and coal bed methane recovery are implemented on a large scale. Produced water samples taken during the project tend to have dissolved solids concentrations between 10 and 100 g/L, and water from coal beds tends to have lower TDS values than water from oil fields. Current pretreatment and desalination technologies including filtration, adsorption, reverse osmosis (RO), and distillation can be used to treat produced water to a high quality level, with estimated costs ranging from $2.6 to $10.5 per cubic meter ($10 to $40 per 1000 gallons). Because of the distances between produced water sources and power plants, transportation costs tend to be greater than treatment costs. An optimization algorithm was developed to determine the lowest cost pipe network connecting sources and sinks. Total water costs increased with flow rate up to 26 million liters per day (7 MGD), and the range was from $4 to $16 per cubic meter ($15 to $60 per 1000 gallons), with treatment costs accounting for 13-23% of the overall cost. Results from this project suggest that produced water is a potential large source of cooling water, but treatment and transportation costs for this water are large.

20 FOSSIL-FUELED POWER PLANTS↗

Climate Science for a Sustainable Energy Future Test Bed and Data Infrastructure Final Report

The collaborative Climate Science for a Sustainable Energy Future (CSSEF) project started in July 2011 with the goal of accelerating the development of climate model components (i.e., atmosphere, ocean and sea ice, and land surface) and enhancing their predictive capabilities while incorporating uncertainty quantification (UQ). This effort required accessing and converting observational data sets into specialized model testing and verification data sets and building a model development test bed, where model components and sub-models can be rapidly evaluated. CSSEF’s prototype test bed demonstrated, how an integrated testbed could eliminate tedious activities associated with model development and evaluation, by providing the capability to constantly compare model output—where scientists store, acquire, reformat, regrid, and analyze data sets one-by-one—to observational measurements in a controlled test bed.

54 ENVIRONMENTAL SCIENCES↗

Phase 2 Methyl Iodide Deep-Bed Adsorption Tests

Nuclear fission produces fission products (FPs) and activation products, including iodine-129, which could evolve into used fuel reprocessing facility off-gas systems, and could require off-gas control to limit air emissions to levels within acceptable emission limits. Research, demonstrations, and some reprocessing plant experience have indicated that diatomic iodine can be captured with efficiencies high enough to meet regulatory requirements. Research on the capture of organic iodides has also been performed, but to a lesser extent. Several questions remain open regarding the capture of iodine bound in organic compounds. Deep-bed methyl iodide adsorption testing has progressed according to a multi-laboratory methyl iodide adsorption test plan. This report summarizes the second phase of methyl iodide adsorption work performed according to this test plan using the deep-bed iodine adsorption test system at the Idaho National Laboratory (INL), performed during the second half of Fiscal Year (FY) 2014. Test results continue to show that methyl iodide adsorption using AgZ can achieve total iodine decontamination factors (DFs, ratios of uncontrolled and controlled total iodine levels) above 1,000, until breakthrough occurred. However, mass transfer zone depths are deeper for methyl iodide adsorption compared to diatomic iodine (I2) adsorption. Methyl iodide DFs for the Ag Aerogel test adsorption efficiencies were less than 1,000, and the methyl iodide mass transfer zone depth exceeded 8 inches. Additional deep-bed testing and analyses are recommended to (a) expand the data base for methyl iodide adsorption under various conditions specified in the methyl iodide test plan, and (b) provide more data for evaluating organic iodide reactions and reaction byproducts for different potential adsorption conditions.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Enhanced INL Power Grid Test Bed Infrastructure – Phase I

Idaho National Laboratory (INL), a Department of Energy (DOE) laboratory, owns, operates, and maintains transmission and distribution power grid infrastructure to support the INL multi program mission. Sections of this power infrastructure, known as the INL Power Grid Test Bed, have been and are being used by government and industry to develop, demonstrate, and validate technologies for the modern grid, including smart grid, on a full scale utility test bed. INL’s power grid includes 61 miles of 140 MW, 138 kV rated electrical power transmission supplying seven main substations, each feeding a separate facility complex (or ‘city’) within the INL’s 890 square mile Site. This power grid is fed by three commercial utilities into the INL’s main control substation, but is operated independently from the commercial utility through its primary substation and command and control center. Within the INL complex, one of the seven complexes, the Critical Infrastructure Test Range Complex (CITRC), has been designated as the INL complex for supporting critical infrastructure research and testing. This complex includes its own substation and 13.8kV distribution network, all configurable and controlled by the INL research and development programs. Through investment partnership with the DOE Office of Electricity Delivery and Energy Reliability (DOE OE), INL is enhancing its existing distribution infrastructure to expand the types of testing that can be conducted and increase flexibility for testing configurations. The enhancement of the INL Power Grid Test Bed will enable development and full scale testing of smart-grid-related technologies and smart devices including testing interoperability, operational performance, reliability, and resiliency contribution at multiple distribution voltage classes, specifically 15kV, 25kV, and 35kV. The expected time frame for completion of the Phase I portion of the enhancement would be 4th quarter fiscal year (FY) 2015.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Considerations of the Differences between Bedded and Domal Salt Pertaining to Disposal of Heat-Generating Nuclear Waste

Salt formations hold promise for eternal removal of nuclear waste from our biosphere. Germany and the United States have ample salt formations for this purpose, ranging from flat-bedded formations to geologically mature dome structures. As both nations revisit nuclear waste disposal options, the choice between bedded, domal, or intermediate pillow formations is once again a contemporary issue. For decades, favorable attributes of salt as a disposal medium have been extoled and evaluated, carefully and thoroughly. Yet, a sense of discovery continues as science and engineering interrogate naturally heterogeneous systems. Salt formations are impermeable to fluids. Excavation-induced fractures heal as seal systems are placed or natural closure progresses toward equilibrium. Engineering required for nuclear waste disposal gains from mining and storage industries, as humans have been mining salt for millennia. This great intellectual warehouse has been honed and distilled, but not perfected, for all nuances of nuclear waste disposal. Nonetheless, nations are able and have already produced suitable license applications for radioactive waste disposal in salt. A remaining conundrum is site location. Salt formations provide isolation and geotechnical barriers reestablish impermeability after waste is placed in the geology. Between excavation and closure, physical, mechanical, thermal, chemical, and hydrological processes ensue. Positive attributes for isolation in salt have many commonalities independent of the geologic setting. In some cases, specific details of the environment will affect the disposal concept and thereby define interaction of features, events and processes, while simultaneously influencing scenario development. Here we identify and discuss high-level differences and similarities of bedded and domal salt formations. Positive geologic and engineering attributes for disposal purposes are more common among salt formations than are significant differences. Developing models, testing material, characterizing processes, and analyzing performance all have overlapping application regardless of the salt formation of interest.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Considerations of the Differences between Bedded and Domal Salt Pertaining to Disposal of Heat-Generating Nuclear Waste

Salt formations hold promise for eternal removal of nuclear waste from our biosphere. Germany and the United States have ample salt formations for this purpose, ranging from flat-bedded formations to geologically mature dome structures. As both nations revisit nuclear waste disposal options, the choice between bedded, domal, or intermediate pillow formations is once again a contemporary issue. For decades, favorable attributes of salt as a disposal medium have been extoled and evaluated, carefully and thoroughly. Yet, a sense of discovery continues as science and engineering interrogate naturally heterogeneous systems. Salt formations are impermeable to fluids. Excavation-induced fractures heal as seal systems are placed or natural closure progresses toward equilibrium. Engineering required for nuclear waste disposal gains from mining and storage industries, as humans have been mining salt for millennia. This great intellectual warehouse has been honed and distilled, but not perfected, for all nuances of nuclear waste disposal. Nonetheless, nations are able and have already produced suitable license applications for radioactive waste disposal in salt. A remaining conundrum is site location. Salt formations provide isolation, and geotechnical barriers reestablish impermeability after waste is placed in the geology. Between excavation and closure, physical, mechanical, thermal, chemical, and hydrological processes ensue. Positive attributes for isolation in salt have many commonalities independent of the geologic setting. In some cases, specific details of the environment will affect the disposal concept and thereby define interaction of features, events and processes, while simultaneously influencing scenario development. Here we identify and discuss high-level differences and similarities of bedded and domal salt formations. Positive geologic and engineering attributes for disposal purposes are more common among salt formations than are significant differences. Developing models, testing material, characterizing processes, and analyzing performance all have overlapping application regardless of the salt formation of interest.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

CFD-DEM Onset of Motion Analysis for Application to Bed Scour Risk Assessment

This CFD study with DEM was done as a part of the Federal Highway Administration’s (FHWA’s) effort to improve scour design procedures. The Computational Fluid Dynamics-Discrete Element Method (CFD-DEM) model, available in CD-Adapco’s StarCCM+ software, was used to simulate multiphase systems, mainly those which combine fluids and solids. In this method the motion of discrete solids is accounted for by DEM, which applies Newton's laws of motion to every particle. The flow of the fluid is determined by the local averaged Navier–Stokes equations that can be solved using the traditional CFD approach. The interactions between the fluid phase and solids phase are modeled by use of Newton's third law. The inter-particle contact forces are included in the equations of motion. Soft-particle formulation is used, which allows particles to overlap. In this study DEM was used to model separate sediment grains and spherical particles laying on the bed with the aim to analyze their movement due to flow conditions. Critical shear stress causing the incipient movement of the sediment was established and compared to the available experimental data. An example of scour around a cylindrical pier is considered. Various depths of the scoured bed and flow conditions were taken into account to gain a better understanding of the erosion forces existing around bridge foundations. The decay of these forces with increasing scour depth was quantified with a ‘decay function’, which shows that particles become increasingly less likely to be set in motion by flow forces as a scour hole increases in depth. Computational and experimental examples of the scoured bed around a cylindrical pier are presented.

97 MATHEMATICS AND COMPUTING↗

Application of Chemical Looping with Spouting Fluidized Bed for Hydrogen-Rich Syngas Production from Catalytic Coal Gasification

The goal of this final project report is to comprehensively summarize the work conducted in project DE-FE0024000. In accordance with the Statement of Project Objectives (SOPO), the University of Kentucky Center for Applied Energy Research (UKy-CAER) developed a multifaceted particle as a catalyst-oxygen carrier (catalyst-OC) for chemical looping gasification. The project also included the design, fabrication, commissioning and performance evaluation of a novel spouted bed approach to gasifiers in conjunction with chemical looping concepts to significantly reduce the capital cost associated with typical gasification technologies. Specifically, UKy-CAER investigated red mud (RM) with and without Cu additives for catalytic and stability benefits in a bench scale reactor, provided the detailed front-end design of a 50 kWth chemical looping gasification (CLG) plant and completed a 70+ hour long experimental campaign to evaluate the coal feed system and the performance and flexibility of the 50 kWth facility with various coal and OCs. Project results verified UKy-CAER’s proposed approach to catalytic coal gasification technology using a chemical looping process with three reaction zones to provide in-situ separated oxygen for coal partial-combustion (e.g. gasification) with water-gas shift reaction. Central to the project was kinetically facile red mud OC and a spouted bed gasifier configuration that enabled the success of the following operation, performance and economic objectives: (1) Low-temperature gasifier operation (as low as 600°C); (2) Avoidance of ash and OCs aggolmeration; (3) Elimination of methane formation; and (4) Promotion of water-gas shift (WGS) reactions and syngas reforming. The red mud OC is economical and the novel spouted bed reducer shows promise, as summarized in this report, as an effective means for improved plant efficiency with reduced process complexity.

01 COAL, LIGNITE, AND PEAT↗

Coal-fueled Pressurized Chemical Looping Combustion with a Spouting Fluidized Bed

The goal of this final project report is to comprehensively summarize the work conducted on project DE-FE0025098. In accordance with the Statement of Project Objectives (SOPO), the University of Kentucky Center for Applied Energy Research (UKy-CAER) (Recipient) has developed a coal-based combined cycle integrated with a pressurized chemical looping combustion (PCLC) technology to achieve high plant efficiency while capturing CO 2 at low cost. The project involved the design, fabrication, commissioning, parametric testing, and performance validation of the spouted bed approach as coal feeding to narrow the major near-term technical gaps that impede the application of PCLC into solid fuel and scale-up. Specifically, UKy-CAER provided detailed front-end design of a 50 kWth PCLC facility, produced approximately 500 lbs of oxygen carrier (OC) from industrial by-product, Red Mud in addition to commercially available ilmenite, and completed a 70+ hour-long experimental campaign to evaluate the coal feed system and performance and flexibility of the 50 kWth facility with various coal, operating pressures, fluidization agent, and OCs. Project results verified UKy-CAER’s proposed approach to address the major technical gaps of solid-fueled PCLC technology which includes: (1) cost-effective materials for OCs with high reactivity, cyclic capacity, chemical stability, and high resistance to agglomeration with coal ash; (2) fast reaction rates during solid-solid chemical looping combustion (CLC) for reduction of the OC inventory and reactor size; (3) simple and effective ash separation from binary mixtures of the OCs and solid fuel ash; (4) spouting bed coal feeding to suppress OC agglomeration in the reducer resulting from the initial coal devolatilization step, coal tar formation; and (5) pollutant removal to avoid sulfur accumulation in the system or their emission into the hot spent air stream which could result in a second train for SOx removal and potentially cause failure of the flue gas turbine blade. UKy-CAER’s economical cycling material and novel spouted bed reducer configuration shows promise, as summarized in this report, as an effective means for improved plant efficiency with reduced process complexity.

01 COAL, LIGNITE, AND PEAT↗

Development of Spouting Bed Reactor for Reduction of Hematite to Magnetite (Final Report)

This project was designed to leverage both past and current technology development efforts and utilize the expertise of the National Energy Technology Laboratory (NETL) in a collaborative effort with SIOX for the development of a spouting bed reactor to produce magnetite from very fine hematite waste. More specifically, the effort involved the conversion of a steel manufacturing byproduct, iron oxide hematite (Fe 2 O 3 ), and reduces it chemically into a salable magnetite product applicable to a number of markets. SIOX previously operated a magnetite batch production facility based on a rotary kiln reactor process. Unfortunately, that process was both costly and inefficient, making it difficult to achieve desired economies, purity, and throughput levels. NETL’s technology, developed in this work, replaced the batch inefficient rotary kiln with a continuous spouting bed reactor capable of producing synthetic magnetite products. In the project, NETL was to develop the spouting bed for the SIOX application and SIOX was to construct and operate a fully integrated pilot scale demonstration plant. NETL successfully completed its tasks, but SIOX due to financial issues was not able to complete their tasks. They have chosen not to participate in this final report so for their tasks a short summary of NETL’s knowledge of their efforts is included.

36 MATERIALS SCIENCE↗

Biomass Combustion in a Circulating Fluidized Bed Combustor

Interest in circulating fluidized bed (CFB) boilers as a power generation technology has skyrocketed in recent years because of several advantages this technology offers over conventional boilers, such as increased gas-solid mixing resulting in higher combustion efficiency and the ability to use lower quality fuels. CFB combustors are operated at lower temperatures than conventional thermal power generation combustors, thus reducing NO x emissions. SO 2 emissions are conveniently controlled through the addition of Ca-based sulphur sorbents within the combustor. This report summarizes the current modeling effort on a 50 kW th CFB combustor with a diameter of 10 cm and a height of 5 m; designed, built, and operated at CanmetENERGY in Ottawa, Canada employing the multiphase particle-in-cell (PIC) approach in the open-source Multiphase Flow with Interphase eXchanges (MFiX) Software Suite. The MFiX-PIC model parameters for the simulation are tuned against cold-flow experiments from CanmetENERGY using 9 kg of olivine sand as the inert bed material. It is shown that for the relatively coarse fluid meshes and large parcel sizes necessitated by the scale of the simulation, filter size dependent corrections to the drag law must be incorporated to ensure accuracy of the simulation results. The validated cold flow model is extended to simulate reacting flow with torrefied hardwood as the feedstock and to validate the combustion reaction scheme. The species concentrations at the riser outlet are compared against CanmetENERGY’s experiments and show satisfactory agreement. The simulations demonstrate the ability of MFiX-PIC to accurately capture the physics and chemistry of a circulating fluidized bed combustor at bench scales, which can be further extended to pilot- and industrial-scale systems.

20 FOSSIL-FUELED POWER PLANTS↗

ZPPR Test Bed (ZTB) Pre-Conceptual Design Report

Authorized by the Nuclear Energy Innovation Capabilities Act (NEICA), the National Reactor Innovation Center (NRIC) provides private sector technology developers access to strategic infrastructures and assets for commercial nuclear energy research, development, demonstration, and deployment activities. The mission is to support a timely and cost-effective path to the licensing and commercialization of new nuclear energy systems. To meet these needs, NRIC is developing two reactor demonstration test beds at Idaho National Laboratory (INL), the ZPPR Test bed (ZTB) and the EBR-II Test bed (ETB). ZTB will support the demonstration of systems that operate at less than 500 kWt. The baseline objective is for the ZPPR Cell to act as a confinement structure capable of siting reactors that utilize Safeguards Category 1 material for operations. The major areas addressed in the pre-conceptual design include: • Installation of an access door • Electrical Power • Heat Removal • Ventilation in the Cell • Reactor Installation Along with the design for ZTB, a concept of operations (COP) has also been developed. The COP is intended to facilitate a common understanding of ideas, challenges, and issues. As systems continue to evolve in complexity System Engineers and Project Directors will utilize and update the COP to develop and sustain a common vision of the system for stakeholders.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Application of Laser Powder Bed Fusion for Transformational Challenge Reactor Core

The following report focuses on the utility of Laser Powder Bed Fusion (LPBF) for the construction of components for the Transformational Challenge Reactor (TCR) core. Multiple additive manufacturing processes are under investigation to evaluate the advantages and viability of each process for direct manufacturing of complex structures needed for future nuclear reactors. Technologies under investigation include binder jet, direct energy deposition (DED), electron beam powder bed fusion (EBPBF), and laser powder bed fusion (LPBF). Each process has advantages and disadvantages. For the core design, two manufacturing approaches are under consideration—one involving the exclusive use of LPDF to fabricate the entire core and the other consisting of integration of LPBF and DED where LPBF is used for the core’s top and bottom manifolds (where complexity is high) and DED is used for the manufacture of the cladding where complexity is still high but geometric variability, size, and speed are better suited for DED. For both approaches, LPBF research has focused on processing parameter development, core design, and manufacturing tolerances for integration of fuel elements. The following report highlights reactor core design as it relates to LPBF and experimental validation of test components necessary for finalizing the core design.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Modeling and Simulation of Xe-100-type Pebble Bed Gas-Cooled Reactor with SCALE

The US Department of Energy (DOE) announced the Advanced Reactor Demonstration Program (ARDP) to accelerate the deployment of advanced reactor concepts. Awardees of ARDP funds are expected to demonstrate the operation of an advanced reactor within 7 years of receiving the award. X-Energy’s advanced reactor concept, the Xe-100, was selected as one of two advanced reactor concepts to receive funding to demonstrate the operation of its high-temperature gas-cooled pebble-bed reactor before the end of this decade. As a result of this push to bring advanced reactors to maturation and commercialization, transition and deployment scenario studies are being performed under the Systems Analysis and Integration (SA&I) campaign within the DOE Office of Nuclear Energy (DOE-NE) to evaluate the transition of the current US commercial fleet of light-water reactors (LWRs) to a future fleet of advanced reactors consisting of a mix of ARDP type reactor concepts and advanced LWRs. To accurately evaluate the front- and back-end resource requirements, it is important to perform reactor physics calculations to determine the discharge burnup and isotopic content, fuel residence time, as well as other parameters. For this purpose, a summer project funded by the SA&I campaign allowed for the setup of SCALE models for full-core Xe-100 type high-temperature gas-cooled pebble-bed reactor and a Xe-100 type slice using publicly available information. The core-averaged equilibrium compositions and zone-wise equilibrium compositions for the slice and 3D models, respectively, were obtained following an iterative depletion method developed by Bostelmann et al. using SCALE’s reactor physics sequence TRITON. The slice model was used with TRITON to generate burnup-dependent cross section libraries at different temperatures which can be used with SCALE’s ORIGAMI code to rapidly determine fuel inventory and therefore to perform quick sensitivity studies on parameters such as the pebble location in the core. The SCALE/TRITON transport and depletion calculation for the Xe-100 type slice model indicates that the isotopic concentrations are in good agreement at 1,300 effective full power days (EFPD) for 235 U. An analysis of 236 U results match 239 Pu results would seem to indicate a typographical error in Mulder and Boyes wherein the reported results of 236 U and 239 Pu are reversed. In addition to SCALE/TRITON calculations, a new capability within SCALE/ORIGAMI for the simulation of pebble-bed reactors was used to study the burnup sensitivity with respect to the pebble pathway through the core. The SCALE/ORIGAMI results show that pebbles that travel closer to the reflector for the entire depletion history have a higher burnup than pebbles that travel through the middle of the core because of the higher thermal to fast flux ratio near the reflector. Consequently, a pebble’s burnup is strongly affected by the pebble’s pathway for each pass. Additional phenomena such as temperature distributions in the core and different travel times of the pebbles in the individual radial zones further affect the burnup distribution. The sensitivity of the discharge vector to the pebble pathways taken during each pass can be evaluated in the future using SCALE/ORIGAMI now that the SCALE inputs have been established.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Performance Testing of a Moving-Bed Gasifier Using Coal, Biomass, and Waste Plastic Blends to Generate White Hydrogen

The objective of this DOE-funded project by the Electric Power Research Institute, Inc. (EPRI), Hamilton Maurer International (HMI) and Sotacarbo S.p.A. (Sotacarbo), is to qualify coal, biomass, and plastic waste blends based on performance testing of selected pellet recipes in a pilot-scale updraft moving-bed gasifier. The testing provides relevant data to advance the commercial-scale design of the moving-bed gasifier to be able to successfully use these feedstocks to produce hydrogen. In particular, the effects of the waste plastics on feedstock development (i.e., blending and pelletizing) and the resulting products (i.e., syngas compositions, organic condensate production, and ash characteristics) are a focus. The gasifier is Hamilton Mauer International, Inc. (HMI)’s moving-bed gasifier, which has been proven capable of gasifying nearly all coal ranks. It has also shown the ability in prior testing work to gasify wood chips. However, mixtures of these fuels with plastic wastes had not yet been prepared and gasified together. The feedstocks were prepared by California Pellet Mill (CPM) under contract to HMI.

01 COAL, LIGNITE, AND PEAT↗