Search NASA⌕ Search

SEARCH · Search NASA

Results for “bulk modulus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Design of continuously graded elastic acoustic cloaks

Here, this letter demonstrates the design of continuously graded elastic cylinders to achieve passive cloaking from harmonic acoustic excitation, both at single frequencies and over extended bandwidths. The constitutive parameters in a multilayered, constant-density cylinder are selected in a partial differential equation-constrained optimization problem, such that the residual between the pressure field from an unobstructed spreading wave in a fluid and the pressure field produced by the cylindrical inclusion is minimized. The radial variation in bulk modulus appears fundamental to the cloaking behavior, while the shear modulus distribution plays a secondary role. Such structures could be realized with functionally-graded elastic materials.

42 ENGINEERING↗

Low-frequency lattice phonons in halide perovskites explain high defect tolerance toward electron-hole recombination

Low-cost solution-based synthesis of metal halide perovskites (MHPs) invariably introduces defects in the system, which could form Shockley-Read-Hall (SRH) electron-hole recombination centers detrimental to solar conversion efficiency. Here, we investigate the nonradiative recombination processes due to native point defects in methylammonium lead halide (MAPbI 3 ) perovskites using ab initio nonadiabatic molecular dynamics within surface-hopping framework. Regardless of whether the defects introduce a shallow or deep band state, we find that charge recombination in MAPbI 3 is not enhanced, contrary to predictions from SRH theory. We demonstrate that this strong tolerance against defects, and hence the breakdown of SRH, arises because the photogenerated carriers are only coupled with low-frequency phonons and electron and hole states overlap weakly. Both factors appreciably decrease the nonadiabatic coupling. We argue that the soft nature of the inorganic lattice with small bulk modulus is key for defect tolerance, and hence, the findings are general to other MHPs.

Science & Technology - Other Topics↗

Nuclear resonant x-ray spectroscopy of (Mg,Fe)SiO{sub 3} orthoenstatites.

We present nuclear resonant inelastic X-ray scattering (NRIXS) and synchrotron Moessbauer spectroscopy (SMS) measurements, both nuclear resonant X-ray spectroscopic methods, on synthetic samples of orthoenstatite-structured (Mg,{sup 57}Fe)SiO{sub 3}, a representative component in Earth's upper mantle. All measurements were performed at ambient conditions. NRIXS spectra were measured for three samples of orthoenstatite containing 20, 13, and 7 mol% FeSiO{sub 3}. The Debye sound velocities were determined from the low-energy region of the partial phonon density of states (PDOS). With known density and bulk modulus, the shear modulus, compressional and shear wave velocities have been computed. The sound velocities obtained from NRIXS are in good agreement with sound velocities obtained using Brillouin spectroscopy and ultrasonic methods for similar compositions. An important advantage of NRIXS is access to additional thermodynamic information, such as the average force constant, mean-square displacement, obtained from the PDOS. We discuss the contribution of the vibrational spectra to these quantities. In addition to the PDOS, the electronic environment of the iron sites in (Mg{sub 0.87}{sup 57}Fe{sub 0.13})SiO{sub 3} orthoenstatite was determined using {sup 57}Fe SMS and conventional Moessbauer spectroscopy. Evaluation of the Moessbauer spectra reveals two distinct iron sites, which are well distinguished by their hyperfine fields. The minority and majority sites are consistent with high-spin Fe{sup 2+} in the M1 and M2 sites, respectively.

43 PARTICLE ACCELERATORS↗

Calculation of the Physicochemical Characteristics of a New Orthorhombic Form of Diamond

A geometrically optimized structure and some properties of a new diamond polymorph have been assessed using density-functional theory calculations in the local-density approximation. The new phase has a primitive orthorhombic lattice (Pmma). The calculation results indicate that the density, sublimation energy, bulk modulus, Vickers hardness, and band gap of this phase are lower than those of cubic diamond by 5–18%. The orthorhombic diamond polymorph can be obtained by compressing graphite in the [001] direction at a pressure of 59.4 GPa. For this phase transition, we calculated theoretical X-ray diffraction patterns of the new phase and intermediate states, which can be used for their identification in experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Computer modeling of the local structure, mixing properties, and stability of solid solutions of alkaline-earth metal oxides

A technique for the computer modeling of disordered binary oxide solid solutions MO-M'O in a wide composition range has been developed. The method of atomistic pair potentials was used for 4 x 4 x 4 supercells. The parameters of the potentials are optimized using the structural and elastic properties of pure components MgO, CaO, SrO, and BaO. The temperature dependences of the heat capacity and entropy are calculated for pure components. The excess mixing properties (enthalpy, volume, bulk modulus, vibrational entropy) are found for different compositions of Mg{sub x}Ca{sub (1-x)}O, Ca{sub x}Sr{sub (1-x)}O, and Sr{sub x}Ba{sub (1-x)}O solid solutions. Temperature and composition dependences of the excess Gibbs energy were constructed, which made it possible to approximately estimate the critical decomposition temperatures and limits of component miscibility. Statistical analysis of lattice distortions in the first and second coordination spheres reveals a detailed picture of the solid-solution local structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ground-state properties of boron-doped diamond

Boron-doped diamond undergoes an insulator-metal or even a superconducting transition at some critical value of the dopant concentration. We study the equilibrium lattice parameter and bulk modulus of boron-doped diamond experimentally and in the framework of the density functional method for different levels of boron doping. We theoretically consider the possibility for the boron atoms to occupy both substitutional and interstitial positions and investigate their influence on the electronic structure of the material. The data suggest that boron softens the lattice, but softening due to substitutions of carbon with boron is much weaker than due to incorporation of boron into interstitial positions. Theoretical results obtained for substitution of carbon are in very good agreement with our experiment. We present a concentration dependence of the lattice parameter in boron-doped diamond, which can be used for to identify the levels of boron doping in future experiments.

36 MATERIALS SCIENCE↗

Structures of diamond-like phases

The diamond-like phases containing carbon atoms with the same degree of hybridization, which is close to sp{sup 3}, are classified. It is found that twenty such phases can exist, and ten of them are described for the first time. Molecular mechanics and semi-empirical quantum-mechanical methods are used to calculate the geometrically optimized structures of diamond-like phase clusters and to determine their structural parameters and properties, such as the density, the bulk modulus, and the sublimation energy. The difference between the properties of the diamond-like phases and those of diamond is found to be determined by the difference between the structures of these phases and diamond.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and electronic properties of XSi{sub 2} (X = Cr, Mo, and W)

The structural and electronic properties of metal silicides XSi{sub 2} (X = Cr, Mo, and W), which crystallize in tetragonal structure, are investigated systematically using the first-principle density functional theory. The total energies are computed as a function of volume and fitted to the Birch equation of state. The ground-state properties such as equilibrium lattice constants a{sub 0} and c{sub 0}, bulk modulus B, its pressure derivative B, B′, and the density of states at the Fermi level, N(E{sub F}), are calculated and compared with other experimental and theoretical results, showing good agreement. The calculated band structure indicates that XSi{sub 2} compounds are semimetallic in nature. From the present study, we predict the structural and electronic properties of CrSi{sub 2} in the tetragonal phase and indicate that CrSi{sub 2} is energetically more stable than MoSi{sub 2} and WSi{sub 2}. Analyzing the bonding properties of the three metal silicides, we observe that WSi{sub 2} has a strong covalent bonding due to W 5d electrons.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of solid-state characteristics on the critical parameters of the vapor–liquid phase transition

Database for the critical point parameters of almost all metals (including transition metals) and semiconductors is used to derive a number of empirical expressions to relate these parameters to the heat of evaporation, the normal density, and the isothermal bulk modulus of these substances in a solid state under normal conditions. The database is obtained using the thermodynamic model proposed earlier.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab initio study of the composite phase diagram of Ni–Mn–Ga shape memory alloys

The magnetic and structural properties of a series of nonstoichiometric Ni–Mn–Ga Heusler alloys are theoretically investigated in terms of the density functional theory. Nonstoichiometry is formed in the coherent potential approximation. Concentration dependences of the equilibrium lattice parameter, the bulk modulus, and the total magnetic moment are obtained and projected onto the ternary phase diagram of the alloys. The stable crystalline structures and the magnetic configurations of the austenitic phase are determined.

36 MATERIALS SCIENCE↗

First-principles calculations of the electronic and structural properties of GaSb

In this paper, we carried out first-principles calculations in order to investigate the structural and electronic properties of the binary compound gallium antimonide (GaSb). This theoretical study was carried out using the Density Functional Theory within the plane-wave pseudopotential method. The effects of exchange and correlation (XC) were treated using the functional Local Density Approximation (LDA), generalized gradient approximation (GGA): Perdew–Burke–Ernzerhof (PBE), Perdew-Burke-Ernzerhof revised for solids (PBEsol), Perdew-Wang91 (PW91), revised Perdew–Burke–Ernzerhof (rPBE), Armiento–Mattson 2005 (AM05) and meta-generalized gradient approximation (meta-GGA): Tao–Perdew–Staroverov–Scuseria (TPSS) and revised Tao–Perdew–Staroverov–Scuseria (RTPSS) and modified Becke-Johnson (MBJ). We calculated the densities of state (DOS) and band structure with different XC potentials identified and compared them with the theoretical and experimental results reported in the literature. It was discovered that functional: LDA, PBEsol, AM05 and RTPSS provide the best results to calculate the lattice parameters (a) and bulk modulus (B{sub 0}); while for the cohesive energy (E{sub coh}), functional: AM05, RTPSS and PW91 are closer to the values obtained experimentally. The MBJ, Rtpss and AM05 values found for the band gap energy is slightly underestimated with those values reported experimentally.

36 MATERIALS SCIENCE↗

Ab initio studies of structural, electronic, optical, elastic and thermal properties of CuGaTe{sub 2}

We have performed ab initio calculations for the structural, electronic, optical, elastic and thermal properties of CuGaTe{sub 2}. In this study, we used an accurate full potential linearized augmented plane wave (FP-LAPW) method to find the equilibrium structural parameters and to compute the full elastic tensors. We report electronic and optical properties with the recently developed density functional of Tran and Blaha. Furthermore, optical features such as dielectric functions, refractive indices, extinction coefficient, optical reflectivity, absorption coefficients, optical conductivities, were calculated for photon energies up to 30 eV. The thermodynamical properties such as Debye temperature, entropy and Gruneisen parameter, bulk modulus and hardness were calculated employing the quasi-harmonic Debye model at different temperatures (0–1000 K) and pressures (0–8 GPa) and the silent results were interpreted. Most of the investigated parameters are reported for the first time.

36 MATERIALS SCIENCE↗

An ab-initio Investigation: The Physical Properties of ScIr{sub 2} Superconductor

Using ab initio technique the physical properties of ScIr{sub 2} superconductor have been investigated with T{sub c} 1.03 K with a MgCu{sub 2}-type structure. We have carried out the plane-wave pseudopotential approach within the framework of the first-principles density functional theory (DFT) implemented within the CASTEP code. The calculated structural parameters confirm a good agreement with the experimental and other theoretical results. Using the Voigt-Reuss-Hill (VRH) averaging scheme the most important elastic properties including the bulk modulus B, shear modulus G, Young’s modulus E and Poisson’s ratio ν of ScIr{sub 2} are determined. At ambient condition, the values of Cauchy pressure and Pugh’s ratio exhibit ductile nature of ScIr{sub 2}. The electronic and optical properties of ScIr{sub 2} were investigated for the first time. The electronic band structure reveals metallic conductivity and the major contribution comes from Ir-5d states. In the ultraviolet region the reflectivity is high up to 50 eV as evident from the reflectivity spectrum.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Boron–Carbon Nanocomposites Fabricated at High Pressures and Temperatures

Interaction of amorphous boron and C{sub 60} fullerite is analyzed at pressures of 2.0 and 7.7. GPa and temperatures of 600–1800°C. Effect of pressure and temperature on the material structure is studied, temperatures for synthesis of boron carbide and diamond are found, and the sequence of transformations of the carbon component is determined. Ultrasonic method is used to measure elastic moduli of the samples, and the dependences of the moduli on the structure are analyzed. It is demonstrated that the boron–carbon nanocomposite synthesized at relatively low pressure (2.0 GPa) and temperature (about 1000°C) exhibits high elastic parameters (bulk modulus, B ≈ 75.3–84.0 GPa; Young modulus, E ≈ 108–119 GPa; and shear modulus, G ≈ 43–47 GPa at a density of about 2.2 g/cm{sup 3}). The results can be used for development of novel nanocomposite materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Thermal and Elastic Properties of Ce{sub x}Th{sub 1 –x}O{sub 2} Mixed Oxides: A Self-Consistent Thermodynamic Approach

A self-consistent thermodynamic model of thorium dioxide and its dilute alloy Ce{sub 0.05}Th{sub 0.95}O{sub 2}, which are of great importance for atomic power engineering, has been constructed based on generalized Debye and Einstein models. In terms of this model, the temperature dependences of the bulk modulus, density, and heat capacity of the systems have been obtained. The anharmonicity of the acoustical and optical modes of the crystal lattice and its change in passing from ThO{sub 2} to Ce{sub 0.05}Th{sub 0.95}O{sub 2} has been discussed.

36 MATERIALS SCIENCE↗

Simulating the Effect of Poisson Ratio on Metallic Glass Properties

Recent work has shown that many metallic glass properties correlate with the Poisson ratio of the glass. We have developed a new model for simulating the atomistic behavior of liquids and glasses that allows us to change the Poisson ratio, while keeping the crystalline phase cohesive energy, lattice constant, and bulk modulus fixed. A number of liquid and glass properties are shown to be directly affected by the Poisson ratio. An increasing Poisson ratio stabilizes the liquid structure relative to the crystal phase, as indicated by a significantly lower melting temperature and by a lower enthalpy of the liquid phase. The liquids clearly exhibit two changes in behavior: one at low temperatures, associated with the conventional glass transition T{sub g}, and a second, higher temperature change associated with the shear properties of the liquids. This second crossover has a characteristic, measurable change in the liquid structure.

36 MATERIALS SCIENCE↗

Structural inheritance and difference between Ti 2 AlC, Ti 3 AlC 2 and Ti 5 Al 2 C 3 under pressure from first principles

The structural inheritance and difference between Ti 2 AlC, Ti 3 AlC 2 and Ti 5 Al 2 C 3 under pressure from first principles are studied. The results indicate that the lattice parameter a are almost the same within Ti 2 AlC, Ti 3 AlC 2 and Ti 5 Al 2 C 3 , and the value of c in Ti 5 Al 2 C 3 is the sum of Ti 2 AlC and Ti 3 AlC 2 which is revealed by the covalently bonded chain in the electron density difference: Al–Ti–C–Ti–Al for Ti 2 AlC, Al–Ti 2 –C–Ti 1 –C–Ti 2 –Al for Ti 3 AlC 2 and Al–Ti 3 –C 2 –Ti 3 –Al–Ti 2 –C 1 –Ti 1 –C 1 –Ti 2 –Al for Ti 5 Al 2 C 3 . The calculated axial compressibilities, volumetric shrinkage, elastic constant c 11 , c 33 /c 11 ratio, bulk modulus, shear modulus, and Young’s modulus of Ti 5 Al 2 C 3 are within the range of the end members (Ti 2 AlC and Ti 3 AlC 2 ) in a wide pressure range of 0–100 GPa. Only Ti 2 AlC is isotropic crystal at about 50 GPa within the Ti–Al–C compounds. All of the Ti 3 d density of states curves of the three compounds move from lower energy to higher energy level with pressure increasing. The similarities of respective bond length, bond overlap population (Ti–C, Ti–Al and Ti–Ti), atom Mulliken charges under pressure as well as the electron density difference for the three compounds are discovered. Among the Ti–Al–C ternary compounds, Ti–Ti bond behaves least compressibility, whereas the Ti–Al bond is softer than that of Ti–C bonds, which can also been confirmed by the density of states and electron density difference. Bond overlap populations of Ti–Ti, Ti–C and Ti–Al indicate that the ionicity interaction becomes more and more stronger in the three structures as the pressure increasing. Lastly, Mulliken charges of Ti 1 , Ti 2 , Ti 3 , C and Al are 0.65, 0.42, 0.39, –0.73, –0.04 at 0 GPa, respectively, which are consistent with the Pauling scale.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Theory of thermal expansion: Quasi-harmonic approximation and corrections from quasi-particle renormalization

“Quasi-harmonic” (QH) theory should not be considered a low-order theory of anharmonic effects in crystals, but should be recognized as an important effect separate from “true” anharmonicity. The original and widely used meaning of QH theory is to put [Formula: see text] volume-dependent harmonic phonon energies [Formula: see text] into the non-interacting phonon free energy. This paper uses that meaning, but extends it to include the use of [Formula: see text] [Formula: see text]-dependent single-particle electron energies [Formula: see text]. It is demonstrated that the “bare” quasi-particle (QP) energies [Formula: see text] and [Formula: see text] correctly give the first-order term in the [Formula: see text]-dependence of the Helmholtz free energy [Formula: see text]. Therefore, they give the leading order result for thermal expansion [Formula: see text] and for the temperature-dependence of the bulk modulus [Formula: see text]. However, neglected interactions which shift and broaden [Formula: see text] with [Formula: see text], also shift the free energy. In metals, the low [Formula: see text] electron–phonon mass enhancement of states near the Fermi level causes a shift in free energy that is similar in size to the electronic QH term. Before [Formula: see text] reaches the Debye temperature [Formula: see text], the mass renormalization essentially disappears, and remaining electron–phonon shifts of free energy contribute only higher-order terms to thermal expansion. Similarly, anharmonic phonon–phonon interactions shift the free energy, but contribute to thermal expansion only in higher order. Explicit next order formulas are given for thermal expansion, which relate “true” anharmonic and similar free energy corrections to QP self-energy shifts.

Physics↗