Search NASA⌕ Search

SEARCH · Search NASA

Results for “catalyst optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Optimizing the Conditions for Ammonia Production Using Absorption

Ammonia is made from hydrogen and nitrogen over a catalyst operating at high temperature and pressure. More ammonia can be produced by changing how the ammonia synthesized is separated, i.e., by replacing the current condensation of ammonia with absorption in salts like magnesium chloride. This paper uses here the concept of resistances in series in conjunction with experiments of absorption and a well-established theory of reaction to identify conditions where the rate of ammonia synthesis can be increased. For example, in one case, if a condenser in a conventional process is simply replaced with an absorber, the increase in production rate per mass of catalyst is capped at 10%. However, if the recycle rate is simultaneously increased, the increase in production rate per gram of catalyst can exceed 1000%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coordination environment tuning of nickel sites by oxyanions to optimize methanol electro-oxidation activity

To achieve zero-carbon economy, advanced anode catalysts are desirable for hydrogen production and biomass upgrading powered by renewable energy. Ni-based non-precious electrocatalysts are considered as potential candidates because of intrinsic redox attributes, but in-depth understanding and rational design of Ni site coordination still remain challenging. Here, we perform anodic electrochemical oxidation of Ni-metalloids (NiP x , NiS x , and NiSe x ) to in-situ construct different oxyanion-coordinated amorphous nickel oxyhydroxides (NiOOH-TO x ), among which NiOOH-PO x shows optimal local coordination environment and boosts electrocatalytic activity of Ni sites towards selective oxidation of methanol to formate. Experiments and theoretical results demonstrate that NiOOH-PO x possesses improved adsorption of OH* and methanol, and favors the formation of CH 3 O* intermediates. The coordinated phosphate oxyanions effectively tailor the d band center of Ni sites and increases Ni-O covalency, promoting the catalytic activity. This study provides additional insights into modulation of active-center coordination environment via oxyanions for organic molecules transformation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reactivity of novel high-performance fuels on commercial three-way catalysts for control of emissions from spark-ignition engines

The Department of Energy “Co-Optimization of Fuels and Engines” initiative aims to simultaneously develop novel high-performance fuels with advanced engine designs to reduce petroleum consumption. To achieve commercialization, advanced engines running on alternative fuels still must meet emissions regulations. Warm three-way catalysts (TWC) are very effective at meeting the stringent emissions regulations on pollutants such as nitrogen oxides (NOx), non-methane organic gases (NMOG) and carbon monoxide (CO) from gasoline-fueled spark-ignition (SI) engines operating under stoichiometric conditions; thus, most SI engine emissions occur during cold-start, when the TWC has not yet achieved light-off. In the current study, the light-off behavior of novel high-performance fuel candidates has been investigated on a hydrothermally-aged commercial TWC using a synthetic engine-exhaust flow reactor system according to industry guidelines. Over 30 potential fuel components were examined in this study, including alkanes, alkenes, alcohols, ketones, esters, aromatic ethers, and non-oxygenated aromatic hydrocarbons. Short-chain acyclic oxygenates, including alcohols, ketones, and esters, tended to light off at relatively low temperatures, while alkenes, aromatics, and cyclic oxygenates tended to light off at relatively high temperatures. The light-off behavior of alkanes and alkenes depended strongly on their size and structure. In terms of the influence on CO light-off on the TWC, the fuels fell into two distinct categories: (i) non-inhibiting species including C 2 -C 3 alcohols, alkanes, acyclic ketones, and esters; and (ii) inhibiting species including alkenes, aromatic hydrocarbons, cyclic oxygenates, and C 4 alcohols.

33 ADVANCED PROPULSION SYSTEMS↗

Oxygen vacancy-rich amorphous FeNi hydroxide nanoclusters as an efficient electrocatalyst for water oxidation

Here, a one-pot strategy is presented to directly synthesize amorphous Fe x Ni y hydroxide nanoclusters (denoted as ANC-Fe x Ni y , <2 nm) with oxygen vacancies induced by ionic liquids. The ANC-Fe x Ni y catalyst presents abundant catalytic sites and high intrinsic conductivity. As such, the optimized ANC-Fe 1 Ni 2 exhibits high activity in oxygen evolution reaction (OER) with a Tafel slope of 39 mV dec –1 and an overpotential of 266 mV at 10 mA cm –2 . Notably, the optimized ANC-Fe 1 Ni 2 shows an extraordinarily large mass activity of 3028 A g FeNi –1 at the overpotential of 300 mV, which is ~24-fold of commercial RuO 2 catalyst. The superior activity of these Fe x Ni y hydroxide nanoclusters is ascribed to (i) the amorphous and distorted structure with abundant oxygen vacancies, and (ii) enhanced active site density by downsizing the ANC-Fe x Ni y clusters. This strategy provides a novel route for enhancing OER electrocatalytic performance and highly encouraging for the future application of amorphous metal hydroxides in catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Breaking the passivation barrier via d-p orbital optimization for stable hydrogen production and sulfion upgrading

The development of energy-efficient hydrogen production technologies represents a critical pathway toward achieving global carbon neutrality objectives. This work provides fundamental insights into overcoming catalyst passivation challenges in sulfide oxidation reaction (SOR)-coupled hydrogen evolution reaction (HER) systems through precise orbital hybridization engineering. Our theoretical simulations reveal that sulfur-passivated ruthenium surfaces can effectively modulate d-p orbital hybridization, significantly reduce d-electron activity while stabilizing long-chain S 8 species and decreasing intermediate adsorption energies. Furthermore, metal carbides/ruthenium heterostructure (MC/Ru, M = V, Mo, W) was designed to achieve simultaneous optimization of both HER (∆G H* = −0.11 eV) and SOR (∆G RDS = 1.51 eV) via work-function-mediated interfacial electron transfer, which effectively tailors surface electronic states. Guided by theoretical predictions, we successfully synthesized a series of metal carbides/ruthenium/nitrogen-doped carbon catalysts based on a solid-phase reaction and designated as MC/Ru@NC (M = V, Mo, W). The optimized VC/Ru@NC catalyst exhibits exceptional performance in a membrane-free two-electrode system, achieving an ultralow cell voltage of 0.76 V at 200 mA cm −2 with outstanding stability over 1600 h, while maintaining 97.5 % Faradaic efficiency for hydrogen production and 73.8 % sulfur recovery efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimizing Catalysis by Combining Molecular Scaling Relationships: Iron Porphyrin-Catalyzed Electrochemical Oxygen Reduction as a Case Study

Here, the present work demonstrates the generality of molecular scaling relationships toward achieving faster catalysis at lower overpotentials. In iron porphyrin-catalyzed oxygen reduction, independent tuning of the catalyst E 1/2 and buffer pK a resulted in improvement of both the maximum turnover frequency (TOF max ) and the effective overpotential (η eff ). Interestingly, the most optimal system is achieved with the most reducing catalyst and a weak buffered acid—a perhaps counterintuitive conclusion. More generally, this study illustrates a path to optimization of catalytic systems through their differing responses to changes in the intrinsic features of the system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synergizing Fe 2 O 3 Nanoparticles on Single Atom Fe‐N‐C for Nitrate Reduction to Ammonia at Industrial Current Densities

The electrochemical reduction of nitrates (NO 3 − ) enables a pathway for the carbon neutral synthesis of ammonia (NH 3 ), via the nitrate reduction reaction (NO 3 RR), which has been demonstrated at high selectivity. However, to make NH 3 synthesis cost-competitive with current technologies, high NH 3 partial current densities (j NH3 ) must be achieved to reduce the levelized cost of NH 3 . Here, the high NO 3 RR activity of Fe-based materials is leveraged to synthesize a novel active particle-active support system with Fe 2 O 3 nanoparticles supported on atomically dispersed Fe–N–C. The optimized 3×Fe 2 O 3 /Fe–N–C catalyst demonstrates an ultrahigh NO 3 RR activity, reaching a maximum j NH3 of 1.95 A cm −2 at a Faradaic efficiency (FE) for NH 3 of 100% and an NH 3 yield rate over 9 mmol hr −1 cm −2 . Operando XANES and post-mortem XPS reveal the importance of a pre-reduction activation step, reducing the surface Fe 2 O 3 (Fe 3+ ) to highly active Fe 0 sites, which are maintained during electrolysis. Durability studies demonstrate the robustness of both the Fe 2 O 3 particles and Fe–N x sites at highly cathodic potentials, maintaining a current of −1.3 A cm −2 over 24 hours. This work exhibits an effective and durable active particle-active support system enhancing the performance of the NO 3 RR, enabling industrially relevant current densities and near 100% selectivity.

active support↗

Selectivity Control in Catalytic Reductive Amination of Furfural to Furfurylamine on Supported Catalysts

Abstract Amines are widely used in the manufacture of pharmaceuticals, agricultural chemicals, polymers, and surfactants. However, amines are mostly produced via petrochemical means, which motivates amine production from renewable resources, such as biomass. However, biomass compounds present added challenges involving poor carbon balances. We show that furfural reacts homogeneously with ammonia to produce reactive primary imines, which form large side products and leads to significant carbon losses. The carbon balance is improved by mixing furfural with furfurylamine prior to reaction to form a secondary imine for use as the reaction substrate. While controlling the primary to secondary amine selectivity is a common challenge in reductive amination, supported metal catalysts, including Ni/SiO 2 , Co/SiO 2 , and Ru/SiO 2 optimize the primary amine yield to 90 to 94 % by using the secondary imine as the reaction substrate. A qualitative correlation between the primary to secondary amine selectivity with the nitrogen binding energy of metals is identified.

Gould, Nicholas S.↗

Advances and prospects to achieve high-performing and durable proton-exchange-membrane unitized regenerative fuel cells

Proton-exchange-membrane unitized regenerative fuel cell (PEM-URFC) is a promising energy storage and conversion device for large-scale and long-term applications. Previous research has primarily focused on materials development studies, with performance and durability not evaluated at relevant conditions. Such an approach becomes insufficient for making URFC technology commercially competitive. In this review, we highlight recent progress on high-performing PEM-URFCs, focusing on electrode engineering, key components, and operating approaches that take realistic operating conditions into consideration. Key components of a membrane electrode assembly (MEA), including catalyst layer, diffusion media, and membrane, which require different optimization strategies, are discussed in this review.

25 ENERGY STORAGE↗

Computing Reaction Kinetics with MC-PDFT–OPESf: Combining Multireference Electronic Structure Theory and Enhanced Sampling

Accurate rate constants are crucial for understanding and optimizing catalytic reactions mediated by enzymes, metalloproteins, and heterogeneous catalysts. These systems frequently present a dual computational challenge. Multiconfigurational reaction sites require multireference techniques for the accurate treatment of the electronic structure, and high activation barriers prevent efficient sampling of unbiased reactive transitions. In this work, we combine multiconfiguration pair-density functional theory (MC-PDFT) as an accurate and efficient multireference electronic structure method with on-the-fly probability-enhanced sampling flooding (OPESf) as an enhanced sampling method capable of accelerating reactive transitions. We demonstrate the approach on the Diels–Alder [4+2] cycloaddition between cis-butadiene and ethene as a reaction characterized by a large activation barrier and multireference character. MC-PDFT–OPESf provides reaction rates in agreement with experiments at a fraction of the computational cost required by conventional unbiased ab initio calculations. Here, we propose MC-PDFT–OPESf as an efficient approach for computing kinetics in strongly correlated molecular systems.

Chemical calculations↗

Fine-tuned local coordination environment of Pt single atoms on ceria controls catalytic reactivity

Constructing single atom catalysts with fine-tuned coordination environments can be a promising strategy to achieve satisfactory catalytic performance. Herein, via a simple calcination temperature-control strategy, CeO 2 supported Pt single atom catalysts with precisely controlled coordination environments are successfully fabricated. The joint experimental and theoretical analysis reveals that the Pt single atoms on Pt 1 /CeO 2 prepared at 550 °C (Pt/CeO 2 -550) are mainly located at the edge sites of CeO 2 with a Pt–O coordination number of ca. 5, while those prepared at 800 °C (Pt/CeO 2 -800) are predominantly located at distorted Ce substitution sites on CeO 2 terrace with a Pt–O coordination number of ca. 4. Pt/CeO 2 -550 and Pt/CeO 2 -800 with different Pt 1 -CeO 2 coordination environments exhibit a reversal of activity trend in CO oxidation and NH 3 oxidation due to their different privileges in reactants activation and H 2 O desorption, suggesting that the catalytic performance of Pt single atom catalysts in different target reactions can be maximized by optimizing their local coordination structures.

36 MATERIALS SCIENCE↗

Efficient conversion of syngas to linear α-olefins by phase-pure χ-Fe5C2

Abstract Oil has long been the dominant feedstock for producing fuels and chemicals, but coal, natural gas and biomass are increasingly explored alternatives 1–3 . Their conversion first generates syngas, a mixture of CO and H 2 , which is then processed further using Fischer–Tropsch (FT) chemistry. However, although commercial FT technology for fuel production is established, using it to access valuable chemicals remains challenging. A case in point is linear α-olefins (LAOs), which are important chemical intermediates obtained by ethylene oligomerization at present 4–8 . The commercial high-temperature FT process and the FT-to-olefin process under development at present both convert syngas directly to LAOs, but also generate much CO 2 waste that leads to a low carbon utilization efficiency 9–14 . The efficiency is further compromised by substantially fewer of the converted carbon atoms ending up as valuable C 5 –C 10 LAOs than are found in the C 2 –C 4 olefins that dominate the product mixtures 9–14 . Here we show that the use of the original phase-pure χ-iron carbide can minimize these syngas conversion problems: tailored and optimized for the process of FT to LAOs, this catalyst exhibits an activity at 290 °C that is 1–2 orders higher than dedicated FT-to-olefin catalysts can achieve above 320 °C (refs. 12–15 ), is stable for 200 h, and produces desired C 2 –C 10 LAOs and unwanted CO 2 with carbon-based selectivities of 51% and 9% under industrially relevant conditions. This higher catalytic performance, persisting over a wide temperature range (250–320 °C), demonstrates the potential of the system for developing a practically relevant technology.

Science & Technology - Other Topics↗

Modeling Synergistic Fuel Cell Membrane Degradation with Mitigating Effects of Cerium

During operation, polymer-electrolyte-membrane (PEM) fuel cells undergo mechanical and chemical degradation mechanisms, which behave synergistically and lead to accelerated membrane degradation over time. This study builds upon previous modeling work on mechanical degradation as described by a pinhole in the membrane and the effects of cerium on chemical degradation.1 By combining these two models, analysis can be carried out on the coupled degradation methods and how the mitigation effects of cerium disrupt the degradation cycle. The mechanical model represents a pinhole in the membrane using an effective void fraction, which allows for increased gas crossover through the membrane and impacts the membrane transport and mechanical properties. A microkinetic model for the chemical degradation is included in the model, including attack of the membrane polymer by hydroxyl radicals as well as the mitigation reaction for quenching of hydroxyl radicals with cerium. A concentrated solution theory approach is used to model the transport of cerium ions throughout the cell.2 The model results show how the location of cerium in the cell can be used to prevent chemical degradation. In addition, the model shows how cerium slows down the rate of pinhole growth by reducing the gas crossover and membrane thinning rate. Finally, the model can be used to optimize the distribution of cerium in the membrane and catalyst layers by balancing trade-offs between lowering degradation rates and decreasing fuel cell performance.

25 ENERGY STORAGE↗

Principles of water oxidation and O2-based hydrocarbon transformation by multinuclear catalytic sites

Abstract The central thrust of this integrated experimental and computational research program was to obtain an atomistic-level understanding of the structural and dynamic factors underlying the design of catalysts for water oxidation and selective reductant-free O2-based transformations. The focus was on oxidatively robust polyoxometalate (POM) complexes in which a catalytic active site interacts with proximal metal centers in a synergistic manner. Thirty five publications in high-impact journals arose from this grant. I. Developing an oxidatively and hydrolytically stable and fast water oxidation catalyst (WOC), a central need in the production of green fuels using water as a reductant, has proven particularly challenging. During this grant period we have designed and investigated several carbon-free, molecular (homogenous), oxidatively and hydrolytically stable WOCs, including the Rb8K2[{Ru4O4(OH)2(H2O)4}(γ-SiW10O36)2]·25H2O (1) and [Co4(H2O)2(α-PW9O34)2]10- (2). Although complex 1 is fast, oxidatively and hydrolytically stable WOC, Ru is neither abundant nor inexpensive. Therefore, development of a stable and fast carbon-free homogenous WOC, based on earth-abundant elements became our highest priority. In 2010, we reported the first such catalyst, complex 2. This complex is substantially faster than 1 and stable under homogeneous conditions. Recently, we have extended our efforts and reported a V2-analog of the complex 2, i.e. [Co4(H2O)2(α-VW9O34)2]10- (3), which shows an even greater stability and reactivity. We succeeded in: (a) immobilizing catalysts 1 and 2 on the surface of various electrodes, and (b) elucidating the mechanism of O2 formation and release from complex 1, as well as the Mn4O4L6 “cubane” cluster. We have shown that the direct O-O bond formation is the most likely pathway for O2 formation during water oxidation catalyzed by 1. II. Oxo transfer catalysts that contain two proximal and synergistically interacting redox active metal centers in the active site form another part of considerable interest of our grant because species with such sites [including methane monooxygenase (MMO) and more] are some of the most effective oxygenase catalysts known. Our team conducted the following research on γ-M2-Keggin complexes: (a) investigated stability of the trimer [{Fe3(OH)3(H2O)2}3(γ-SiW10O36)3]15-, 4, in water, and developed the chemistry and catalysis of the di-iron centered POM, [γ(1,2)-SiW10{Fe(OH)}2O38]6-, 5, in organic solvents (Figure 2). We also study the thermodynamic and structural stability of γ-M2-Keggin in aqueous media for different M’s (d-electron metals). We have defined two structural classes of POMs with proximally bound d-electron metal centers. We refer to these structural isomers of the {γ-M2SiW10} family of POMs as “in-pocket” and “out-of pocket”. We have elucidated the factors controlling the structure and stability of the V, Fe, Ru, Tc, Mo and Rh derivatives of [(SiO4)M2(OH)2W10O32]4- using a range of computational tools. We have: (a) demonstrated that heteroatom X in these polyanions may function as an “internal switch” for defining the ground electronic states and, consequently, the reactivity of the γ-M2-Keggin POM complexes; (b) elucidated reactivity of divacant lacunary species and polyperoxotungstates (PPTs), {Xn+O4[WO(O2)2]4}n-, which could be degradation products of γ-M2-Keggin complexes in aqueous media; (c) elucidated the role of the POM ligand in stabilization of {Ru2} and {(Ru-oxo)2} fragments in the reactant and product of the reaction of {γ-[(Xn+O4)Ru2(OH)2W10O32]}(8-n)- (where X = Si4+, P5+ and S6+) with O2, and (d) the mechanisms of olefin epoxidation catalyzed by these di-d-transition metal substituted and divacant lacunary γ-M2-Keggin complexes. III. Complementing the efforts presented above was the development of less time-consuming but reasonably accurate computational methods allowing one to explore more deeply large catalytic systems. We developed Reactive Force Field (ReaxFF) to study interaction of the targeted POMs with water, proton and hydroxide ions in the liquid phase. We tested our ReaxFF parameters on the Lindqvist POMs, M6O19n-, where M = Nb and Ta. These parameters are made available as part of the ReaxFF code. In addition, we have developed parameters for Sc, Ti, Fe, Co and Ni in combination with H, C, N, O, as well as the same metal (M-M) for the spin-polarized self-consistent-charge density-functional tight-binding (DFTB) method. Test calculations showed that the DFTB method with the present parameters in most cases reproduces structural properties very well. These parameters are made available as part of the DFTB code. Thus, this DOE BES funded research project has clarified several key areas impacting (a) water oxidation and O2-based hydrocarbon transformation, (b) stabilization of key structures and catalytic intermediates in such processes, (c) immobilization of molecular catalysts on metal oxide surfaces, and (d) application of optimal computational methods to study reaction dynamics in large systems.

58 GEOSCIENCES↗

Towards computational materials design from first principles using alchemical changes and derivatives.

The design of new materials with specific physical, chemical, or biological properties is a central goal of much research in materials and medicinal sciences. Except for the simplest and most restricted cases brute-force computational screening of all possible compounds for interesting properties is beyond any current capacity due to the combinatorial nature of chemical compound space (set of stoichiometries and configurations). Consequently, when it comes to computationally optimizing more complex systems, reliable optimization algorithms must not only trade-off sufficient accuracy and computational speed of the models involved, they must also aim for rapid convergence in terms of number of compounds 'visited'. I will give an overview on recent progress on alchemical first principles paths and gradients in compound space that appear to be promising ingredients for more efficient property optimizations. Specifically, based on molecular grand canonical density functional theory an approach will be presented for the construction of high-dimensional yet analytical property gradients in chemical compound space. Thereafter, applications to molecular HOMO eigenvalues, catalyst design, and other problems and systems shall be discussed.

99 GENERAL AND MISCELLANEOUS↗

Integrating Carbon Nanomaterials with Metals for Bio-sensing Applications

Age structure in most developed countries is changing fast as the average lifespan is increasing significantly, calling for solutions to provide improved treatments for age-related neurological diseases and disorders. In order to address these problems, a reliable way of recording information about neurotransmitters from in vitro and in vivo applications is needed to better understand neurological diseases and disorders as well as currently used treatments. Likewise, recent developments in medicine, especially with the opioid crisis, are demanding a swift move to personalized medicine to administer patient needs rather than population-wide averages. In order to enable the so-called personalized medicine, it is necessary to be able to do measurements in vivo and in real time. These actions require sensitive and selective detection of different analytes from very demanding environments. Current state-of-the-art materials are unable to provide sensitive and selective detection of neurotransmitters as well as the required time resolution needed for drug molecules at a reasonable cost. To meet these challenges, we have utilized different metals to grow carbon nanomaterials and applied them for sensing applications showing that there are clear differences in their electrochemical properties based on the selected catalyst metal. Additionally, we have combined atomistic simulations to support optimizing materials for experiments and to gain further understanding of the atomistic level reactions between different analytes and the sensor surface. With carbon nanostructures grown from Ni and Al + Co + Fe hybrid, we can detect dopamine, ascorbic acid, and uric acid simultaneously. On the other hand, nanostructures grown from platinum provide a feasible platform for detection of H 2 O 2 making them suitable candidates for enzymatic biosensors for detection of glutamate, for example. Tetrahedral amorphous carbon electrodes have an ability to detect morphine, paracetamol, tramadol, and O-desmethyltramadol. With carbon nanomaterial-based sensors, it is possible to reach metal-like properties in sensing applications using only a fraction of the metal as seed for the material growth. We have also seen that by using nanodiamonds as growth catalyst for carbon nanofibers, it is not possible to detect dopamine and ascorbic acid simultaneously, although the morphology of the resulting nanofibers is similar to the ones grown using Ni. This further indicates the importance of the metal selection for specific applications. However, Ni as a continuous layer or as separate islands does not provide adequate performance. Thus, it appears that metal nanoparticles combined with fiber-like morphology are needed for optimized sensor performance for neurotransmitter detection. This opens up a new research approach of application-specific nanomaterials, where carefully selected metals are integrated with carbon nanomaterials to match the needs of the sensing application in question.

59 BASIC BIOLOGICAL SCIENCES↗

Ternary Phosphides Ba M 2 P 2 : Tailoring Crystal and Electronic Structures Enables Highly Efficient HER Electrocatalysis

Binary transition metal phosphides and their solid solutions have emerged as promising hydrogen evolution reaction (HER) catalysts. Although many research endeavors have adopted strategies to vary compositions to optimize catalytic performance, they mainly focus on binary structures, which represent only a small fraction of the abundant phase space of structure types among transition metal phosphides. Here, the largely unexplored class of ternary and multinary ordered phosphides in catalysis comprises two or more metals with quite different chemical nature, concealing the structure–property relationships essential for advancing catalyst design. Here, we explored phosphides crystallizing in one of the most abundant ordered intermetallic structure types, —the ThCr 2 Si 2 type, —where square nets of 3d transition metal M and P atoms are separated by layers of electropositive Ba cations. Four ternary BaM 2 P 2 (M = Fe, Fe/Cu, Fe/Ni, Ni) catalysts were synthesized and characterized. BaNi 2 P 2 showed high HER activity in acidic electrolyte, which required an overpotential, η 10 , of only 62 mV to drive current density j = –10 mA/cm 2 and high stability with a potential drop rate of 0.25 mV/h. BaNi 2 P 2 outperformed other Ni-based catalysts, such as Ni 2 P and Ni 5 P 4 . Notably, at current densities above –170 mA/cm 2 , BaNi 2 P 2 outperformed the standard Pt electrode measured under identical conditions. Electronic structure analysis revealed a volcano-type activity trend among the four BaM 2 P 2 catalysts based on their d-band center positions, highlighting the role of electropositive Ba cations in shifting the Ni-3d orbitals into an optimal position.

BaNi2P2↗

Graphene-transition metal catalyst for hydrogen evolution reaction

Functionalized catalysts for use in a hydrogen evolution reaction (HER) contain nanoparticles containing a transition metal enveloped in layers of graphene, which renders the nanoparticles resistant to passivation while maintaining an optimal ratio of transition metal and transition metal oxide in the nanoparticles. The catalysts can be utilized with anionic exchange polymer membranes for hydrogen production by alkaline water electrolysis.

Mukerjee, Sanjeev↗