Search NASA⌕ Search

SEARCH · Search NASA

Results for “ceramic processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Pyrolysis Oil Stabilization: Hot-Gas Filtration (CRADA Final Report)

The hypothesis that was tested in this task was that separation of char, with its associated mineral matter from pyrolysis vapors before condensation, will lead to improved oil quality and stability with respect to storage and transportation. The metric used to evaluate stability in this case was a 10-fold reduction in the rate of increase of viscosity as determined by ASTM D445 (the accelerated aging test). The primary unit operation that was investigated for this purpose was hot-gas filtration. A custom-built heated candle filter system was fabricated by the Pall Corporation and furnished to NREL for this test campaign. This system consisted of a candle filter element in a containment vessel surrounded by heating elements on the external surface of the vessel. The filter element and housing were interfaced to NREL’s existing 0.5 MTD pyrolysis Process Development Unit (PDU). For these tests the pyrolysis reactor of the PDU was operated in the entrained-flow mode. The HGF test stand was installed on a slipstream from the PDU so that both hot-gas filtered oil and bio-oil that was not hot-gas filtered could be collected for purposes of comparison. Two filter elements from Pall were tested: 1) porous stainless steel (PSS) sintered metal powder; 2) sintered ceramic powder. An extremely sophisticated bio-oil condensation and collection system was designed and fabricated at NREL and interfaced to the filter unit.

09 BIOMASS FUELS↗

Effects of lanthanum dopants on the Curie–Weiss and the local order behaviors for Pb{sub 1−x}La{sub x}(Fe{sub 2/3}W{sub 1/3}){sub 0.7}Ti{sub 0.3}O{sub 3} relaxor ferroelectrics

Graphical abstract: The local order as a function of temperature by using (a) the spin-glass model and (b) the modified-Landau theory for Pb{sub 1−x}La{sub x}(Fe{sub 2/3}W{sub 1/3}){sub 0.7}Ti{sub 0.3}O{sub 3} ceramics with different amounts of lanthanum dopants. Display Omitted Highlights: ► The effects of La are investigated for Pb{sub 1−x}La{sub x}(Fe{sub 2/3}W{sub 1/3}){sub 0.7}Ti{sub 0.3}O{sub 3} ceramics. ► La can change their dielectric properties and ordering state. ► The spin glassy behaviors and the freezing process are also affected by La. ► The response mechanisms of La are proposed for the local polarization behavior. -- Abstract: The effects of lanthanum dopants are investigated on the dielectric responses for Pb{sub 1−x}La{sub x}(Fe{sub 2/3}W{sub 1/3}){sub 0.7}Ti{sub 0.3}O{sub 3} ceramics. According to the experimental data and fitting results, it is concluded that the dielectric characteristics are changed from a long-range-ordered (LRO) ferroelectric state to a short-range-ordered (SRO) relaxor by increasing the amounts of lanthanum dopants. Furthermore, the spin glassy behaviors and the freezing process of local polarizations are not only affected by the ordering degree of B-site cations but also affected by the defect polar pairs. Their response mechanisms are proposed that the growth of the 1:1 ordered domain Pb{sub 1−x}La{sub x}(Fe{sub 1/2}W{sub 1/2})O{sub 3} is impeded since its charge imbalance is enhanced by increasing the amounts of lanthanum dopants, and the defect polar pairs of lead, tungsten and oxygen vacancy are induced by the pyrochlore phase, PbWO{sub 4} or Pb{sub 0.99}La{sub 0.01}WO{sub 4}, when the amount of lanthanum dopants exceed 5 mol.%.

36 MATERIALS SCIENCE↗

Al 2 O 3 /TiO 2 coated separators: Roll-to-roll processing and implications for improved battery safety and performance

Heat generation is one of the major concerns with lithium-ion batteries (LIB) while charging them at higher currents, which could inadvertently impact the rate performance and reduce the safety of the cell. Polymer separator is one of the least thermal conductive components of a LIB. In addition, commercial separators for LIB are made from polyolefin membranes that tend to shrink and curl at higher temperatures due to their lower melting temperature (~130 °C). Developing separators with improved thermal stability and higher electrolyte uptake is essential for enhancing the safety as well as the performance of the LIB. In this work, a thin layer of ceramic coatings (Al 2 O 3 and TiO 2 ) is applied on propylene (PP) membrane to improve the thermal stability and electrolyte affinity without compromising the rate performance. A slurry with 100% Al 2 O 3 coated on the polypropylene separator exhibited the best improvement in thermal stability ( shrinkage of 0.6% vs 6.0% for uncoated membrane) and excellent rate performance with 92% capacity retention at 2C. The Al 2 O 3 coated separator demonstrated excellent electrolyte wettability compared to the uncoated membrane. The cross-plane thermal conductivity of the ceramic coated separators is analyzed to understand their heat transfer behavior. The thermal conductivity of the separator is improved by ~3.2 times with the Al 2 O 3 coating.

25 ENERGY STORAGE↗

Quantitative In Situ Studies of Dynamic Fracture in Brittle Solids Using Dynamic X-ray Phase Contrast Imaging

Here, we demonstrate the use of X-ray phase contrast imaging with sub-microsecond temporal resolution to obtain quantitative visualization of dynamic fracture processes in brittle solids. We examine an amorphous solid (fused silica), a ceramic single crystal (single-crystal quartz), and a polycrystalline ceramic (boron carbide), in the form of single-edge notched specimens loaded using a three-point apparatus at nominal strain rates up to ~800 s -1 . We observe that the crack tip speed for boron carbide is relatively independent of mode I stress intensity factor rate ($\dot{K}$ I ) for these rates of loading, while that of fused silica and single-crystal quartz increases with $\dot{K}$ I . Further, for the amorphous and single crystal cases, we observe the development of a crack tip instability in the form of crack branching as the crack tip speed approaches 45% of the Rayleigh wave speed. This suggests that strain-rate-dependent mechanisms contribute to crack branching. Such mechanisms may, in turn, affect the macroscopic fracture properties of these materials.

36 MATERIALS SCIENCE↗

Ceramics from self-sustained reactions: Recent advances

Specific applications of self-sustained reactions to fabricate advanced ceramics, along with details such as synthesis conditions, mechanism of microstructure formation, and material properties, are overviewed. The latest achievements in the field include analysis of three such synthetic routes: reactive spark plasma sintering, combustion synthesis with mechanical stimulation, and solution combustion synthesis. Examples of fabrication of high-temperature nanostructured ceramics and composites, as well as non-equilibrium ceramic phases are also discussed.

36 MATERIALS SCIENCE↗

Laser Induced Breakdown Spectroscopy analysis of europium and samarium in aluminum oxide

The use of Laser Induced Breakdown Spectroscopy as a technique for analysis of europium and samarium concentrations in ceramic aluminum oxide samples was investigated for application to studying lanthanide separation processes. Metal oxide powders of europium and/or samarium were mixed with aluminum oxide at varying concentrations and pressed into pellets. A comparison of different approaches to building a univariate simple linear regression analysis curve is presented. A linear behavior was seen over the total lanthanide concentration range from 0.086 to 12.358 weight percent (wt%). In conclusion, the calculated limits of detection for the univariate calibration curves were determined to range from 0.001 to 0.108 wt% and 0.001 and 0.183 wt% for europium and samarium, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental and Theoretical Thermokinetic Analysis of the Na 3 VO 4 –CO 2 Reaction System under Different Physicochemical Conditions

Sodium vanadate (Na 3 VO 4 ) was synthesized, structural and microstructurally characterized as well as tested as possible carbon dioxide (CO 2 ) captor through thermodynamic calculations in addition to thermogravimetric dynamic and isothermal analyses. Ceramic structural characterization evidenced the formation of the Na 3 VO 4 crystal phase, while microstructural features evidenced dense agglomerates with a poor specific surface area, although synthesis temperature (600 °C) was not as high as that for other sodium ceramics. Na 3 VO 4 was investigated for the CO 2 capture process through dynamic and isothermal experiments, in the presence or absence of oxygen. All these experiments showed that Na 3 VO 4 possesses interesting CO 2 capture properties in a specific temperature range (520 and 600 °C). Isothermal products characterization allowed to elucidate the reaction pathway, implying the Na 4 V 2 O 7 formation, as possible reactive intermediate. In fact, reaction path evolution was supported with theoretical thermodynamic data. Moreover, the kinetic analysis, performed using the Avrami-Erofeev mathematical model and subsequent thermodynamic data obtention, probed the positive influence of the temperature, in both CO 2 superficial and bulk chemical sorption processes, while oxygen addition did not enhance the superficial process. Additionally, as it would be expected, kinetics were enhanced as a function of the CO 2 concentration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of BiSrCa(Y)CuO superconductor from the sol-gel method and the effect of Y substitution

Superconducting Bi{sub 2}Sr{sub 2}Ca{sub 1-x}Y{sub x}Cu{sub 2}O{sub 8} ceramics samples have been prepared by Sol-Gel methods using citrate process. The influences of the conditions of preparation of oxide powder compound on structural and superconducting properties have been investigated by X ray diffraction (XRD), Scanning Electron Microscopy (SEM) equipped with EDS. The critical transition temperatures Tc have been determined by resistivity versus temperature measurements. Cell parameters samples were calculated from XRD patterns. The polyacryl amide gel makes the citrate process easier, more rapid and affords the possibility of synthesis of high quality oxide powders.

36 MATERIALS SCIENCE↗

Magnetic and dielectric properties of Aurivillius phase Bi{sub 6}Fe{sub 2}Ti{sub 3−2x}Nb{sub x}Co{sub x}O{sub 18} (0 ≤ x ≤ 0.4)

We investigate the structural, magnetic, and dielectric properties of Bi{sub 6}Fe{sub 2}Ti{sub 3−2x}Nb{sub x}Co{sub x}O{sub 18} (0 ≤ x ≤ 0.4). The room-temperature ferromagnetism is observed in the Nb and Co co-doped samples compared with the paramagnetic behavior in Bi{sub 6}Fe{sub 2}Ti{sub 3}O{sub 18}. The ferromagnetism in Bi{sub 6}Fe{sub 2}Ti{sub 3−2x}Nb{sub x}Co{sub x}O{sub 18} can be understood in terms of spin canting of the antiferromagnetic coupling of the Fe-based and Co-based sublattices via Dzyaloshinsky-Moriya interaction. Moreover, doping Co at Ti sites can significantly enhance the ferromagnetic Curie temperature compared with the substitution of Co for Fe in the Aurivillius compounds. The dielectric loss of Bi{sub 6}Fe{sub 2}Ti{sub 3−2x}Nb{sub x}Co{sub x}O{sub 18} (0.1 ≤ x ≤ 0.4) exhibits a relaxation process. The rather large activation energy in the 0.1 ≤ x ≤ 0.3 samples implies that the relaxation process is not due to the thermal motion of oxygen vacancies inside ceramics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Metal–ceramic composite structures for fabrication of high power density plasmonic devices

The recent decade brought many advances to plasmonics, but high power density plasmonic antennas designed to behave as heaters or operate in high temperature environments are still facing material stability challenges preventing their ultimate use. Gold has been the optimal choice among plasmonic materials but experiences morphology changes at temperature that result in device efficiency reduction and failure. Bulk titanium nitride has been explored as a solution but has deal-breaking tradeoffs in device quality factor. In this paper, we explore via proof-of-concept the use of a metal–ceramic composite structure to determine whether a bulk Au nanorod can provide strong plasmonic resonances while coated with an ultrathin conformal layer of titanium nitride or silica to provide morphological stability and sufficient plasmonic activity without excessive resonance quality degradation. We show SEM-level morphological stability for temperatures up to 500 °C with coatings below 4 nm. Computer modeling suggests the ultrathin titanium nitride has detrimental effects on the strong plasmonic resonances of a Au nanorod. Here, we then looked into other possible coatings for solutions to stabilize high power density plasmonic antennas including plasmonic oxides, metal adhesion layers, and silica, the latter appearing to be the best option while lowering the overall peak electric field intensity, the silica increases the electric field intensity at its boundary.

36 MATERIALS SCIENCE↗

The Impact of Sintering Atmosphere and Temperature on the Phase Evolution of High Surface Area LSCF Prepared by In Situ Carbon Templating

The thermochemical stability of lanthanum strontium cobalt ferrite (LSCF) processed between 1000 °C–1200 °C via the in situ carbon templating method was studied. This method generates high surface area ceramics at traditional solid oxide fuel cell (SOFC) sintering temperatures by generating a carbon template in situ and subsequently removing the template by oxidation at 700 °C. Argon processed samples produced an amorphous carbon template, whereas nitrogen tended to form graphitic carbon. Prior to the oxidation step, nitrogen samples comprised larger La 2 O 3 crystallites (22–40 nm) compared to argon (9–17 nm). Upon oxidation, argon samples resulted in a pure LSCF phase with surface areas in the 21–29 m 2 ·g −1 range, whereas nitrogen samples contained significant impurities. This demonstrates that the size of La 2 O 3 crystallites formed during inert processing limited the ability to produce a pure LSCF phase. Symmetrical cells comprising nano-LSCF electrodes generated by the templating method were compared to cells sintered directly in air. Impedance results suggest that nano-LSCF cells and cells processed in air were dominated by interfacial charge transfer resistance and gas diffusion, respectively. The results map out conditions for preparing and integrating high surface area, nanostructured LSCF into SOFC electrodes at traditional sintering temperatures. Strategies for improving the interfacial resistance of nano-LSCF electrodes are discussed.

Muhoza, Sixbert P. (ORCID:0000000299864241)↗

Biocompatibility of a novel heat-treated and ceramic-coated magnesium alloy (Mg–1.2Zn–0.5Ca–0.5Mn) for resorbable skeletal fixation devices

Our recent exploration into the use of biodegradable metals and surface treatments resulting in sufficient strength for skeletal reconstruction applications has led to the need to test these devices’ cytotoxicity. More specifically, our group has developed a resorbable magnesium alloy, Mg–1.2Zn–0.5Ca–0.5Mn, that can be strengthened by heat treatment and coated with a ceramic layer offering time-certain resorption of a medical device. This in vitro study shows that these treatments do not result in cytotoxicity. Both heat-treated (HT) and HT + ceramic-coated (sol–gel) coupons demonstrated more than 70% viability. Thus, these processing steps are likely to be useful in producing biocompatible, resorbable implants that incorporate our Mg–1.2Zn–0.5Ca–0.5Mn alloy.

36 MATERIALS SCIENCE↗

Direct LiT Electrolysis in a Metallic Fusion Blanket

A process that simplifies the extraction of tritium from molten lithium-based breeding blankets was developed. The process is based on the direct electrolysis of lithium tritide using a ceramic Li ion conductor that replaces the molten salt extraction step. Extraction of tritium in the form of lithium tritide in the blankets/targets of fusion/fission reactors is critical in order to maintain low concentrations. This is needed to decrease the potential tritium permeation to the surroundings and large releases from unforeseen accident scenarios. Extraction is complicated due to required low tritium concentration limits and because of the high affinity of tritium for the blanket. This work identified, developed and tested the use of ceramic lithium ion conductors capable of recovering hydrogen and deuterium through an electrolysis step at high temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sorbent-based Oxygen Production for Energy Systems

Project DE-FE0024075 deals with the development of a high-temperature sorbent-based oxygen production technology. Sorbent-based oxygen production process utilizes oxygen-storage properties of Perovskites to (1) adsorb oxygen from air in a solid sorbent, and (2) release the adsorbed oxygen into a sweep gas such as CO2 and/or steam for gasification systems or recycled flue gas for oxy-combustion systems. Pure oxygen can be produced by the use of vacuum instead of a sweep gas to affect the pressure swing. By developing more efficient and stable, higher sorption capacity, newer class of materials operating at lower temperatures this process represents a major advancement in air separation technology. Newly developed perovskite ceramic sorbent materials with order-disorder transition have a higher O 2 adsorption capacity, 200 ºC lower operating temperatures, and up to two orders of magnitude faster desorption rates than those used in earlier development efforts. The performance advancements afforded by the new materials lead to substantial savings in capital investment and operational costs. Cost of producing oxygen using sorbents could be as much as 60% lower than a cryogenic air separation unit.

01 COAL, LIGNITE, AND PEAT↗

Sorbent-based Oxygen Production for Energy Systems

Project DE-FE0024075 deals with the development of a moderate-temperature sorbent-based oxygen production technology. Sorbent-based oxygen production process utilizes oxygen-storage properties of Perovskites to (1) adsorb oxygen from air in a solid sorbent, and (2) release the adsorbed oxygen into a sweep gas such as CO 2 and/or steam for gasification systems or recycled flue gas for oxy-combustion systems. Pure oxygen can be produced by the use of vacuum instead of a sweep gas to affect the pressure swing. By developing more efficient and stable, higher sorption capacity, newer class of materials operating at moderate temperatures this process represents a major advancement in air separation technology. Newly developed perovskite ceramic sorbent materials with order-disorder transition have a higher O 2 adsorption capacity, potentially 200 °C lower operating temperatures, and up to two orders of magnitude faster desorption rates than those used in earlier development efforts. The performance advancements afforded by the new materials lead to substantial savings in capital investment and operational costs. Cost of producing oxygen using sorbents could be as much as 26% lower than VPSA and about 13% lower than a large cryogenic air separation unit. Cost advantage against large cryogenic separation is limited because sorbent-based separation numbers up sorbent modules for achieving the larger capacity.

01 COAL, LIGNITE, AND PEAT↗

Sorbent-based Oxygen Production for Energy Systems

Project DE-FE0024075 deals with the development of a moderate-temperature sorbent-based oxygen production technology. Sorbent-based oxygen production process utilizes oxygen-storage properties of Perovskites to (1) adsorb oxygen from air in a solid sorbent, and (2) release the adsorbed oxygen into a sweep gas such as CO 2 and/or steam for gasification systems or recycled flue gas for oxy-combustion systems. Pure oxygen can be produced by the use of vacuum instead of a sweep gas to affect the pressure swing. By developing more efficient and stable, higher sorption capacity, newer class of materials operating at moderate temperatures this process represents a major advancement in air separation technology. Newly developed perovskite ceramic sorbent materials with order-disorder transition have a higher O 2 adsorption capacity, potentially 200 ºC lower operating temperatures, and up to two orders of magnitude faster desorption rates than those used in earlier development efforts. The performance advancements afforded by the new materials lead to substantial savings in capital investment and operational costs. Cost of producing oxygen using sorbents could be as much as 26% lower than VPSA and about 13% lower than a large cryogenic air separation unit. Cost advantage against large cryogenic separation is limited because sorbent-based separation numbers up sorbent modules for achieving the larger capacity.

01 COAL, LIGNITE, AND PEAT↗

Core-Shell Nanoparticles for Flexible Electrophoretic Displays

The process of electrophoretic deposition (EPD) has many applications in the field of ceramics materials and coatings.It allows for control of the thickness and morphology through variations in the concentration of the suspension, applied potential, and deposition time. In EPD, a solution containing charged particles are attracted and coated onto an electrically conductive substrateof opposing charge to the coated particles by applying an electric field (Besra 3).The electrophoretic mobility of the nanoparticle solutionmust be considered when designing an EPD device as well. The packing of the charged particles on the charged substrate can lead to some interesting optical effects.

36 MATERIALS SCIENCE↗

High-Performance Coal-Based Commercial Facade Panels and Architectural Components (Phase I Final Report)

Semplastics has developed, tested, and documented the viability for commercialization of a new class of composite architectural panel materials that use coal as the primary constituent. This project produced sample panels using these novel materials that comprise 55% coal by mass (71% carbon by mass) and are comparable in dimensions to commercially available materials, while displaying superior mechanical strength, significant weight savings, and better insulating ability at a competitive cost. Phase I moved this coal-based composite materials technology from a Technology Readiness Level (TRL) of 3 to TRL 5. Semplastics’ new coal-based composite materials display an array of high-performance characteristics, including light weight, mechanical durability, temperature stability, and water resistance. These new materials require less energy to produce than comparable commercial products and could be manufactured on existing conventional plastic resin processing equipment in commercial quantities. The coal particles are completely encapsulated in ceramic from a polymer-derived ceramic (PDC) precursor, then bonded together by another inorganic resin. The material can be molded and cured to produce fireproof components such as ceiling panels, facades, and extruded underlayment, blocking, and backer boards, as well as other architectural design components such as moldings. The project included the production of sample panels for proof of concept, testing of the panels to show their improved characteristics, and development of a scale-up strategy to demonstrate the viability of the coal-based panels as a commercial alternative to existing building materials.

36 MATERIALS SCIENCE↗