Search NASA⌕ Search

SEARCH · Search NASA

Results for “cleaning methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Analysis of Benefits Associated With Projects and Technologies Supported by the Clean Transportation Program

The California Energy Commission's Clean Transportation Program (CTP) supports a wide range of alternative, low-carbon fuel and vehicle projects. This report improves upon the 2014 Alternative and Renewable Fuel and Vehicle Technology Program (ARFVTP) Benefits Report(the former name of the Clean Transportation Program), which focused on two components of benefit calculation: expected benefits and market transformation benefits. The "expected benefits" are defined as benefits that accrue because of the direct displacement of petroleum-based fuels or vehicle technologies. The "market transformation benefits" accrue because of CTP funding shifting the underlying market dynamics and accelerating the adoption of alternative fuel vehicles. This report documents the updated methods used in the benefits analysis in 2014 and applies them for this 2021 Clean Transportation Program Benefits Report. The project team used data collected from CTP projects funded from 2009 to the third quarter of 2021 to estimate the benefits between 2021 and 2030. CTP projects valued at $\$898.3 million$ were assessed (out of $\$1.04 billion$ funded) to estimate expected benefits of 249 million gallons per year petroleum reduction and 2.79 million metric tons per year of carbon dioxide equivalent greenhouse gas (GHG) reduction in 2030. Market transformation benefits are additive to the expected benefits and were estimated with high and low ranges for the 315 relevant projects evaluated. The market transformation benefits' GHG reductions are estimated as 2.2 million to 6.2 million metric tons of carbon dioxide equivalent per year and the petroleum reductions as 145.3 million to 671.5 million gasoline gallon equivalents per year in 2030. Combining both benefit types, the CTP projects can make significant progress toward meeting California's long-term GHG and petroleum fuel use reduction goals.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Improved Solid-State Reaction Method for Scaled-Up Synthesis of Ceramic Proton-Conducting Electrolyte Materials

Protonic ceramic electrochemical cells (PCECs) represent promising technologies in the production of clean electricity, decarbonized hydrogen, chemicals, and fuels at intermediate temperatures. One of the challenges in commercializing PCECs is to produce the electrolyte materials on a large scale. The conventional solid-state reaction (SSR) method suffers from tedious synthesis procedures and low phase purity of the products due to the formation of unwanted secondary phases. Herein, we report an improved SSR (i-SSR) method for kilogram-scale production of high phase-purity electrolyte material BaZr 0.4 Ce 0.4 Y 0.1 Yb 0.1 O 3–δ (BZCYYb4411). In this method, the ball-milled precursor powders are pelletized prior to calcination, which effectively reduces the length of the diffusion paths between the components during perovskite phase formation. In this study, the synthesis procedure and calcination temperature are carefully optimized for efficient and repeatable production based on the powder crystallization behavior. A combined technoeconomic analysis and life cycle assessment modeling suggest that the i-SSR method could reduce the total production cost and greenhouse gas emissions by up to 19% and 39%, respectively, compared to the conventional SSR method. The high quality of the synthesized electrolyte material is corroborated by the excellent electrical conductivity and electrochemical performance of the fabricated PCEC cells.

36 MATERIALS SCIENCE↗

Center for Efficiency in Sustainable Energy Systems

The main goal of the Center for Efficiency in Sustainable Energy Systems is to produce a methodology that evaluates a variety of energy systems. Task I. Improved Energy Efficiency for Industrial Processes: This task, completed in partnership with area manufacturers, analyzes the operation of complex manufacturing facilities to provide flexibilities that allow them to improve active-mode power efficiency, lower standby-mode power consumption, and use low cost energy resources to control energy costs in meeting their economic incentives; (2) Identify devices for the efficient transformation of instantaneous or continuous power to different devices and sections of industrial plants; and (3) use these manufacturing sites to demonstrate and validate general principles of power management. Task II. Analysis of a solid oxide fuel cell operating on landfill gas: This task consists of: (1) analysis of a typical landfill gas; (2) establishment of a comprehensive design of the fuel cell system (including the SOFC stack and BOP), including durability analysis; (3) development of suitable reforming methods and catalysts that are tailored to the specific SOFC system concept; and (4) SOFC stack fabrication with testing to demonstrate the salient operational characteristics of the stack, including an analysis of the overall energy conversion efficiency of the system. Task III. Demonstration of an urban wind turbine system: This task consists of (1) design and construction of two side-by-side wind turbine systems on the YSU campus, integrated through power control systems with grid power; (2) preliminary testing of aerodynamic control effectors (provided by a small business partner) to demonstrate improved power control, and evaluation of the system performance, including economic estimates of viability in an urban environment; and (3) computational analysis of the wind turbine system as an enabling activity for development of smart rotor blades that contain integrated sensor/actuator/controller modules to enhance energy capture and reduce aerodynamic loading and noise by way of virtual aerodynamic shaping. Accomplishments: Task I. Improved Energy Efficiency for Industrial Processes: We organized an energy management training session held on February 22, 2011, which was advertised through a regional manufacturing association to provide wide-ranging notification. Over two dozen companies were represented a the seminar, ranging from heavy manufacturing businesses with $5,000,000 per year energy expenses, to small, light manufacturing facilities. Task 2. Landfill Fuel Cell Power Generation Solid Oxide Fuel Cells (SOFCs) were constructed and evaluated as a means of obtaining electrical energy from landfill gas. Analysis of landfill gas. Attempts at collecting gas samples at the landfill and evaluating them on campus were still unsuccessful. Even a Teflon® sample bag would lose its H2S content. Evaluation of Gas Clean-up We consider this a confirmation of the CO2 effect on the solubility of H2S in water making much less sulfide available for the photocatalyst. It also means that another method should be employed to clean up landfill gas. Nonetheless, composition of impurities in landfill gas was reduced sufficiently to allow successful operation of the test fuel cell. Comparison to a PEM fuel cell system. If a PEMFC were to be operated with landfill gas as the fuel, the gas would have to be treated for sulfur removal, and then processed in a reformer large enough to drive the equilibrium far toward the products, so that negligible CO would flow into the fuel cell. Analysis of a fuel cell running on landfill gas. Using a Gow-Mac gas chromatograph with a thermal conductivity detector, unambiguous determination of CO can be made, at least as a primary constituent Task 3: Task 3 Plasma Controlled Turbine Blades Wind Turbine Selection. After carefully reviewing the various model available in the market the team selected the ARE 110 (2.5kW). The ARE 110 provides a very long life with little maintenance due to their relatively low rotational speeds (low RPM). The turbines large swept area (10.2ms2/110sq.ft), high-efficiency blades, purpose built alternator, and optimized power electronics ensure maximum energy capture from a wide range of wind speeds. Two wind turbines were installed side-by-side at the Melnick Hall site to compare their performance. Evaluate and Optimize Aerodynamically Enhanced Turbine Blades Due to delays in the installation of the wind turbines, no actual data was obtained within the contract period. At this time, the turbines are installed and operational at YSU with standard blades. We are in contact with Orbital Research and in discussion as to how best the required data can be obtained.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Guidance for Integrating Energy Justice and Equity in Building Technology Deployment Programs: Tracking, Reporting, and Maximizing the Flow of Benefits from Building System Technology Deployment Activities to Disadvantaged Communities and Target Sectors

The Federal Justice40 Initiative directs at least 40% of the overall benefits of certain clean energy investments to flow to disadvantaged communities and requires that all federal programs covered by Justice40 consult stakeholders to determine the program benefits, and that the flow of benefits to disadvantaged communities is tracked and reported. Unequal distribution of benefits, in terms of access to clean energy research, design, development, and deployment, can disproportionately benefit or burden certain communities. This can result in higher rates of pollution, negative health effects, and increased energy burdens and insecurities in disadvantaged communities. Programs focused on decarbonizing the built environment can enhance health, quality of life, and economic opportunities for impacted communities. This guidance document, developed by Pacific Northwest National Laboratory and funded by the U.S. Department of Energy’s Building Technologies Office, provides best practices and approaches for incorporating energy justice and equity principles into building technology deployment activities. It provides best practices and recommendations for communicating with and involving disadvantaged communities and target building sectors in program activities, along with methods to monitor and report the distribution of benefits to these sectors. This document lays out a set of strategies, metrics, and best practices that can be implemented over time to apply energy justice and equity approaches, whether the program is just starting out or ongoing. Although this guidance was designed for Building Technologies Office technology deployment programs, the best practices, recommendations, and methods can be valuable to any program concerned with the equitable deployment of clean energy technologies. The goal of this project is to enable the equitable development, deployment, and adoption of clean energy technologies and practices.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Cleaning graphene with a titanium sacrificial layer

Graphene is a promising material for future electronic applications and chemical vapor deposition of graphene on copper is a promising method for synthesizing graphene on the wafer scale. The processing of such graphene films into electronic devices introduces a variety of contaminants which can be difficult to remove. An approach to cleaning residues from the graphene channel is presented in which a thin layer of titanium is deposited via thermal e-beam evaporation and immediately removed. This procedure does not damage the graphene as evidenced by Raman spectroscopy, greatly enhances the electrical performance of the fabricated graphene field effect transistors, and completely removes the chemical residues from the surface of the graphene channel as evidenced by x-ray photoelectron spectroscopy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Non-aqueous cleaning solvent substitution

A variety of environmental, safety, and health concerns exist over use of chlorinated and fluorinated cleaning solvents. Sandia National Laboratories, Lawrence Livermore National Laboratories, and the Kansas City Division of AlliedSignal have combined efforts to focus on finding alternative cleaning solvents and processes which are effective, environmentally safe, and compliant with local, state, and federal regulations. An alternative solvent has been identified, qualified, and implemented into production of complex electronic assemblies, where aqueous and semi-aqueous cleaning processes are not allowed. Extensive compatibility studies were performed with components, piece-parts, and materials. Electrical testing and accelerated aging were used to screen for detrimental, long-term effects. A terpene, d-limonene, was selected as the solvent of choice, and it was found to be compatible with the components and materials tested. A brief history of the overall project will be presented, along with representative cleaning efficiency results, compatibility results, and residual solvent data. The electronics industry is constantly searching for proven methods and environmentally-safe materials to use in manufacturing processes. The information in this presentation will provide another option to consider on future projects for applications requiring high levels of quality, reliability, and cleanliness from non-aqueous cleaning processes.

Meier, Gerald J.↗

Positive ion emission from oxidized aluminum during ultraviolet excimer laser irradiation

We report quadrupole mass-selected time-of-flight measurements of positive ions from oxidized aluminum metal (and for comparison, single-crystal sapphire) during pulsed excimer laser irradiation at 193 and 248 nm. This work focuses on laser fluences well below onset of rapid etching or optical breakdown. By far the most intense emissions are due to Al{sup +}. On previously unexposed material, the ion kinetic energies are initially well above the photon energy, consistent with the ejection of Al{sup +} sorbed at surface electron traps. During prolonged irradiation, the emission intensities and kinetic energies gradually fall. Emission from patches of oxide would account for previous reports of laser-induced Al{sup +} emission from metallic aluminum surfaces cleaned by ion etching if patches of thin oxide were to survive the etching treatment.

36 MATERIALS SCIENCE↗

Contact resonance atomic force microscopy imaging in air and water using photothermal excitation

Contact Resonance Force Microscopy (CR-FM) is a leading atomic force microscopy technique for measuring viscoelastic nano-mechanical properties. Conventional piezo-excited CR-FM measurements have been limited to imaging in air, since the “forest of peaks” frequency response associated with acoustic excitation methods effectively masks the true cantilever resonance. Using photothermal excitation results in clean contact, resonance spectra that closely match the ideal frequency response of the cantilever, allowing unambiguous and simple resonance frequency and quality factor measurements in air and liquids alike. This extends the capabilities of CR-FM to biologically relevant and other soft samples in liquid environments. We demonstrate CR-FM in air and water on both stiff silicon/titanium samples and softer polystyrene-polyethylene-polypropylene polymer samples with the quantitative moduli having very good agreement between expected and measured values.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

THE M31 NEAR-INFRARED PERIOD-LUMINOSITY RELATION AND ITS NON-LINEARITY FOR δ Cep VARIABLES WITH 0.5 ≤ log (P) ≤ 1.7

We present the largest M31 near-infrared (F110W (close to J band), F160W (H band)) Cepheid sample so far. The sample consists of 371 Cepheids with photometry obtained from the Hubble Space Telescope PHAT program. The sample of 319 fundamental mode Cepheids, 16 first overtone Cepheids, and 36 type II Cepheids was identified using the median absolute deviation outlier rejection method we develop here. This method does not rely on priors and allows us to obtain this clean Cepheid sample without rejecting a large fraction of Cepheids. The obtained period-luminosity relations (PLRs) have a very small dispersion, i.e., 0.155 mag in F160W, despite using random phased observations. This remarkably small dispersion allows us to determine that the PLRs are significantly better described by a broken slope at 10 days than a linear slope. The use of our sample as an anchor to determine the Hubble constant gives a 3.2% larger Hubble constant compared to the Riess et al. sample.

79 ASTRONOMY AND ASTROPHYSICS↗

Removing Atmospheric Fringes from Zwicky Transient Facility i-band Images using Principal Component Analysis

The Zwicky Transient Facility is a time-domain optical survey that has substantially increased our ability to observe and construct massive catalogs of astronomical objects by use of its 47 square degree camera that can observe in multiple filters. However the telescope’s i-band filter suffers from significant atmospheric fringes that reduce photometric precision, especially for faint sources and in multi-epoch co-additions. Here we present a method for constructing models of these atmospheric fringes using Principal Component Analysis that can be used to identify and remove these artifacts from contaminated images. In addition, we present the Uniform Background Indicator as a quantitative measurement of the reduced correlated background noise and photometric error present after removing fringes. We conclude by evaluating the effect of our method on measuring faint sources through the injection and recovery of artificial stars in both single-image epochs and co-additions. Our method for constructing atmospheric fringe models and applying those models to produce cleaned images is available for public download in the open source Python package fringez.

79 ASTRONOMY AND ASTROPHYSICS↗

A Novel Zero-Discharge Supercritical Water-Based Wave Energy Desalination System

This paper presents a sustainable and innovative wave-energy-based water desalination system combined with an emerging supercritical water process for a zero-liquid-discharge technology. There is growing demand for producing clean water. Within desalination technologies, reverse osmosis, one of the most popular methods, uses a semipermeable membrane that separates fresh water from pressurized seawater. However, this technology produces brine, which is harmful to the environment. Supercritical water desalination is employed here as a means of using the brine to extract more fresh water and eliminate this environmentally toxic output. Wave energy is integrated with reverse osmosis to provide direct seawater pressurization for the first stage in the process. This wave energy converter converts the motion of waves into pressurized water through a power takeoff unit.

reverse osmosis↗

The Use of Hydrogen as a Fuel for Engines in the Energy Cycle of Remote Production Facilities

The approach to using hydrogen as fuel, which ensures the smooth operation of autonomous power systems that use renewable energy sources (wind or solar power installations) with the stochastic mode of power generation, has been presented. The fundamental possibility of implementing the nondetonation combustion of hydrogen via the addition of ecologically clean components or a small percentage of methane has been demonstrated by methods of mathematical modeling.

09 BIOMASS FUELS↗

Heating effects on jack pine pyrogenic organic matter properties from a pyrocosm study in 2022

This dataset contains data associated with the preprint “Fire removes preexisting pyrogenic organic matter from the ecosystem through the mechanisms of both direct combustion and increasing mineralizability” (Luo et al., 2025b), which is the complementary study to the published paper “Reburning pyrogenic organic matter: a laboratory method for dosing dynamic heat fluxes from above” (Luo et al., 2025a). We designed a full-factorial experiment with different burial depths of jack pine (Pinus banksiana Lamb) pyrogenic organic matter (PyOM) (Surface, 1 cm, and 5 cm) and different heat-flux profiles (High, Low, and Control) to examine how subsequent fires affect the properties of preexisting PyOM. We measured total carbon (C), pH, dissolved organic carbon (DOC), dissolved inorganic carbon (DIC), and mineralized C (as CO₂-C, from a 12-week incubation).We found that high heat flux and/or surface placement resulted in substantial direct C losses through combustion. Intermediate heat exposure produced both combustion losses and increases in DOC and mineralizability, which may have complex long-term implications: an increased dissolved fraction of PyOM may promote downward transport into mineral soils and potentially contribute to deeper, longer-term C storage, but it may also make PyOM more susceptible to microbial decomposition. Under the lowest heat flux and deepest burial, most PyOM was retained, and changes in DOC and C mineralization were minimal. Finally, PyOM pH, an important chemical property, decreased under low-temperature heating but increased under higher temperatures.We uploaded pH data for all samples (“pH_of_all_samples.csv”); pH and temperature-related data (peak temperature and degree hours) for samples in High and Low heat-flux treatments (“pH_vs_peakT_and_degree_hours_only_for_heated_samples.csv”); total C data (“CN_pct_C_stock_C_loss_in_samples.csv”); DOC and DIC data (“doc_dic.csv”); and mineralized C (CO₂-C) data (“CO2-C_all_original.csv”). Additional details can be found in the Methods & Sampling section.All datasets uploaded to ESS-DIVE are clearly labeled, cleaned, and include both raw and derived data, ready for reuse in other analyses. All analysis code and raw datasets are also available on GitHub: https://github.com/MengmengLuo/Fire-removes-preexisting-pyrogenic-organic-matter-from-the-ecosystem.

54 ENVIRONMENTAL SCIENCES↗

Multivarable nyquist array method with application to turbofan engine control

Extensions to the multivariable Nyquist array (MNA) method are used to design a feedback control system for the quiet clean shorthaul experimental engine. The results of this design are compared with those obtained from the deployment of an alternate control system design on a full scale nonlinear, real time digital simulation. The results clearly demonstrate the utility of the MNA synthesis procedures for highly nonlinear sophisticated design applications.

Leininger, G. G.↗

An experimental study of the aerodynamics of a NACA 0012 airfoil with a simulated glaze ice accretion

An experimental study was conducted in the Ohio State University subsonic wind tunnel to measure the detailed aerodynamic characteristics of an airfoil with a simulated glaze ice accretion. A NACA 0012 model with interchangeable leading edges and pressure taps every one percent chord was used. Surface pressure and wake data were taken on the airfoil clean, with forced transition and with a simulated glaze ice shape. Lift and drag penalties due to the ice shape were found and the surface pressure clearly showed that large separation bubbles were present. Both total pressure and split-film probes were used to measure velocity profiles, both for the clean model and for the model with a simulated ice accretion. A large region of flow separation was seen in the velocity profiles and was correlated to the pressure measurements. Clean airfoil data were found to compare well to existing airfoil analysis methods.

Bragg, M. B.↗

Design of a device to remove lunar dust from space suits for the proposed lunar base

The National Aeronautics and Space Administration plans to begin construction of a lunar base soon after the turn of the century. During the Apollo missions, lunar dust proved to be a problem because the dust adhered to all exposed material surfaces. Since lunar dust will be a problem during the establishment and operation of this base, the need exists for a device to remove the dust from space suits before the astronauts enter clean environments. The physical properties of lunar dust were characterized and energy methods for removing the dust were identified. Eight alternate designs were developed to remove the dust. The final design uses a brush and gas jet to remove the dust. The brush bristles are made from Kevlar fibers and the gas jet uses pressurized carbon dioxide from a portable tank. A throttling valve allows variable gas flow. Also, the tank is insulated with Kapton and electrically heated to prevent condensation of the carbon dioxide when the tank is exposed to the cold (- 240 F) lunar night.

Harrington, David↗

ETP-0492, Measured Residual Stresses in CYL S/N 53 Fretted Area

This test report presents the results of a residual stress survey of the inner clevis leg of lightweight cylinder SIN 053 as described by ETP-0492. The intent of this testing was to evaluate the residual stresses that occur in and around the inner clevis leg at the capture feature contact zone during a normal flight cycle. Lightweight case cylinder segment IU50717, S/N L053 from Flight STS-27 exhibited fretting around the contact zone of the inner clevis leg and the capture feature of the field joint. Post flight inspection revealed several large fitting pits on the inside of the inner clevis leg. This cylinder was assigned for both residual stress and metallurgical evaluation. This report is concerned only with the residual so= evaluations. The effects of glass bead cleaning and fi=ing were evaluated using the x-ray diffraction method.

Webster, Ronald L.↗

Cellulose Acetate Replica Cleaning Study of Genesis Non-Flight Sample 3CZ00327

The Genesis mission collected solar wind and brought it back to Earth in order to provide precise knowledge of solar isotopic and elemental compositions. The ions in the solar wind were stopped in the collectors at depths on the order of 10 to a few hundred nanometers. This shallow implantation layer is critical for scientific analysis of the composition of the solar wind and must be preserved throughout sample handling, cleaning, processing, distribution, preparation and analysis. We are working interactively with the community of scientists analyzing Genesis samples, using our unique laboratory facilities -- and, where needed, our unique cleaning techniques -- to significantly enhance the science return from the Genesis mission. This work is motivated by the need to understand the submicron contamination on the collectors in the Genesis payload as recovered from the crash site in the Utah desert, and -- perhaps more importantly -- how to remove it. That is, we are evaluating the effectiveness of the wet-chemical "cleaning" steps used by various investigators, to enable them to design improved methods of stripping terrestrial contamination from surfaces while still leaving the solar-wind signal intact.

Kuhlman, K. R.↗