Search NASA⌕ Search

SEARCH · Search NASA

Results for “conditional shift”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Broadband cross polarization for ultra-wideline magic-angle spinning NMR

Over the past decade, there has been a sustained interest in using frequency-swept (FS) pulses for the efficient acquisition of wideline and ultra-wideline (UW) NMR powder patterns. Such experiments are typically conducted under static conditions, employing both direct- and indirect-excitation methods (i.e., WCPMG and BRAIN-CP/WCPMG, respectively). Recently, Koppe et al. demonstrated that the WCPMG pulse sequence can be used to efficiently acquire wideline and UW NMR spectra with spinning sideband (SSB) manifolds under magic-angle spinning (MAS) conditions, capitalizing on the increased signal-to-noise ratios (SNR) afforded by MAS. To date, there have been only a few instances of broadband cross-polarization (CP) experiments using FS pulses under MAS conditions and no applications to systems exhibiting wideline and/or ultra-wideline powder patterns, despite the clear advantages these experiments could offer. Herein, we demonstrate that FS pulses selectively applied to a single sideband of the S spin can be used for efficient 1 H-S polarization transfer to S = 1/2 nuclides with large anisotropic chemical shift interactions at slow to moderate MAS rates. The Hartmann–Hahn matching conditions in BRAIN-CP/WCPMG-MAS experiments bear similarity to those of standard CP sequences, yet operate over UW frequency ranges and only require low-amplitude RF pulses on the S channel. Crucial to the success of the BRAIN-CP/WCPMG-MAS experiment is careful calibration of the RF amplitude, transmitter offset, and effective frequency sweep of the FS pulse applied to the S spins at a given MAS rate. Thus, by means of numerical simulations and experimental testing, we provide recommendations for the parameterization and setup of BRAIN-CP/WCPMG-MAS experiments for their most efficient use. Results showcasing the capability of the BRAIN-CP/WCPMG-MAS pulse sequence are presented, including applications to 119 Sn, 195 Pt, and 103 Rh NMR.

Kimball, James J. [Florida State University, Talla↗

Thermal Dynamics and Lithium Plating Detection in High‐Power Li‐Ion Batteries for eVTOL Applications

The rapid electrification of aerial transportation is driving the need for high‐performance Li‐ion batteries that can operate reliably under stringent thermal and safety constraints. The unique mission profile of electric Vertical Take‐off and Landing (eVTOL) aircraft necessitates a focused investigation into the thermal behavior and safety characteristics of these batteries. Here, in this study, operando isothermal microcalorimetry is employed to examine the thermal evolution of Li‐ion batteries under cycling conditions representative of eVTOL operations. These findings reveal that high‐power discharge events—such as those during take‐off and landing—shift the thermal response toward exothermic behavior, in contrast to the typically endothermic response expected under near‐equilibrium cycling conditions. Additionally, the results suggest that advanced electrolyte formulations may help suppress excess heat generation, thereby improving battery safety. Notably, the calorimetric results exhibit a distinct thermal signature associated with lithium plating, offering a potential diagnostic for detecting Li plating during eVTOL operation. Overall, this study demonstrates the utility of isothermal microcalorimetry as a valuable tool for assessing thermal risks in Li‐ion batteries for eVTOL applications, and highlights the importance of targeted design strategies to mitigate safety hazards during high‐power demand scenarios.

Li plating↗

Biogeochemical Cycling of Redox-Sensitive Elements in Permafrost-Affected Ecosystems

Northern high latitudes are experiencing rapid changes in climate that drive permafrost thaw and shifts in hydrology and soil saturation. These factors regulate redox conditions across permafrost-affected landscapes, potentially altering carbon storage in soils and exacerbating climate change through accelerated decomposition of soil organic matter. Redox conditions impact soil carbon storage directly by influencing rates and pathways of organic matter decomposition, and indirectly by moderating the bioavailability of organic molecules and nutrients. Indeed, the ability of increased plant growth to offset C losses in permafrost regions will be regulated by nutrient availability (e.g., N, P) that varies across redox gradients. The purpose of this review is to examine how redox conditions shape biogeochemical cycling of ecologically important elements (P, N, S, Fe) in permafrost-affected ecosystems. Although carbon cycling in these regions continues to be widely studied, relatively little information is available on the elements that regulate C cycling. We discuss the complex feedbacks between climate change, hydrology, and landscape change that control redox conditions, then examine how these factors regulate biogeochemical cycles. We identify key gaps in our understanding of how changing climate may alter biogeochemical cycles and carbon storage in northern high-latitude ecosystems.

Herndon, Elizabeth↗

A hybrid building thermal modeling approach for predicting temperatures in typical, detached, two-story houses

Within the residential building sector, the air-conditioning (AC) load is the main target for peak load shifting and reduction since it is the largest contributor to peak demand. By leveraging its power flexibility, residential AC is a good candidate to provide building demand response and peak load shifting. For realization of accurate and reliable control of AC loads, a building thermal model, which characterizes the properties of a building’s envelope and its thermal mass, is an essential component for accurate indoor temperature or cooling/heating demand prediction. Building thermal models include two types: “Forward” and “Data-Driven”. Due to time-saving and cost-effective characteristics, different data-driven models have been developed in a number of research studies. However, few developed models can predict temperatures in respective zones of a multiple-zone building with an open air path between zones e.g., an open stairwell connecting two floors of a home. In this research, a novel hybrid modeling approach is proposed to predict the average indoor air temperatures of both the upstairs and downstairs. This “hybrid” solution integrates both gray-box, i.e. RC model and black-box models. A developed RC model is used to predict the building mean temperature, and black-box model, in which the supervised machine learning algorithms are leveraged, is used to predict the temperature difference between the downstairs and upstairs. Compared with the measured data from a real house, the results obtained have acceptable/satisfactory accuracy. The method proposed in this study integrates the advantages of black-box and gray-box modeling. As a result, it can be used as a reliable alternative to predict the average temperatures in respective floors of typical detached two-story houses.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

The Remarkable 2024 North Atlantic Mid‐Season Hurricane Lull

Abstract The 2024 North Atlantic (hereafter Atlantic) hurricane season started quickly, with the earliest Category 5 on record (Beryl) and three hurricanes forming through 14 August. Following Ernesto's dissipation on 20 August, the Atlantic hurricane season became extremely quiet during the climatological peak of hurricane season, with only one Category 2 hurricane (Francine) and one tropical storm through 23 September. Several environmental factors likely contributed to this unexpected, prolonged lull. During mid‐to‐late August, subseasonal conditions were broadly favorable for Atlantic hurricanes, but a northward shift in African easterly wave emergence latitude yielded fewer tropical cyclone seed disturbances that also traversed unfavorably cool ocean water. During early‐to‐mid September, subseasonal variability driven by the Madden‐Julian oscillation was less conducive to hurricane activity, with several bouts of increased vertical wind shear across the central Atlantic. Throughout most of the lull, the tropical Atlantic was anomalously dry and subsident, suppressing hurricane formation chances. Plain Language Summary The 2024 North Atlantic (hereafter Atlantic) hurricane season was anticipated to be extremely active, with seasonal forecasts calling for a potentially historic season. Following a busy start including the earliest Category 5 Atlantic hurricane on record (Beryl), the season became very quiet between 20 August–23 September, with only one Category 2 hurricane (Francine) and one tropical storm forming. Following the lull, the Atlantic became extremely busy again, with seven hurricanes forming from 25 September through the end of the season–the most on record for this period. This paper focuses on the surprising lull and attributes it to several different factors, including a late‐August northward shift in African easterly wave tracks (organized thunderstorm complexes spanning thousands of kilometers that often serve as Atlantic hurricane seeds). This northward shift brought these systems out over colder water and into a drier airmass, suppressing their hurricane formation chances. During the first 3 weeks of September, a large‐scale tropical phenomenon known as the Madden‐Julian oscillation, resulted in increased sinking motion, drier mid‐levels and increased vertical wind shear–all of which typically reduce Atlantic hurricane activity. Overall, the lull demonstrates how seed disturbances and other environmental factors can strongly modulate aggregate seasonal tropical cyclone activity. Key Points Following an active start, the 2024 Atlantic hurricane was quiet during the climatological peak with only 1 tropical storm and 1 hurricane The lull was not anticipated by seasonal forecasting agencies, which called for an extremely active 2024 Atlantic hurricane season Factors reducing storm count included a northward shift in African easterly waves, broad‐scale subsidence, and reduced mid‐level moisture

Klotzbach, P J↗

Ecological divergence of syntopic marine bacterial species is shaped by gene content and expression

Identifying mechanisms by which bacterial species evolve and maintain genomic diversity is particularly challenging for the uncultured lineages that dominate the surface ocean. A longitudinal analysis of bacterial genes, genomes, and transcripts during a coastal phytoplankton bloom revealed two co-occurring, highly related Rhodobacteraceae species from the deeply branching and uncultured NAC11-7 lineage. These have identical 16S rRNA gene amplicon sequences, yet their genome contents assembled from metagenomes and single cells indicate species-level divergence. Moreover, shifts in relative dominance of the species during dynamic bloom conditions over 7 weeks confirmed the syntopic species’ divergent responses to the same microenvironment at the same time. Genes unique to each species and genes shared but divergent in per-cell inventories of mRNAs accounted for 5% of the species’ pangenome content. These analyses uncover physiological and ecological features that differentiate the species, including capacities for organic carbon utilization, attributes of the cell surface, metal requirements, and vitamin biosynthesis. Such insights into the coexistence of highly related and ecologically similar bacterial species in their shared natural habitat are rare.

59 BASIC BIOLOGICAL SCIENCES↗

Evolution of silicate coordination in architected amorphous and crystalline magnesium silicates during carbon mineralization

Advancing durable solutions for carbon storage and removal at the gigaton scale to produce solid carbonates via carbon mineralization requires harnessing earth abundant magnesium silicate resources. Calibrated insights linking the structural and morphological features of earth abundant amorphous and crystalline magnesium silicate phases to their reactivity are essential for scalable deployment but remain underdeveloped. To resolve the influence of silica coordination and mass transfer on carbon mineralization behavior, magnesium silicates bearing amorphous and crystalline phases (AC Mg-silicate) are synthesized. The structural and morphological transitions starting from colloidal precursors to their final synthesized form on heating are delineated using operando ultra small/small/wide angle X-ray scattering (USAXS/SAXS/WAXS) measurements. The evolution of the silicate phases on carbon mineralization of AC Mg-silicate is contrasted with that of highly crystalline Mg-silicate (HC Mg-silicate) when reacted at 200 °C and a CO 2 partial pressure of 20 atm in water and 1 M NaHCO 3 solution in stirred and unstirred environments. These experimental conditions are analogous to those of the water–gas-shift reaction for sustainable recovery of H 2 with inherent carbon mineralization. Enhancement in the extent of carbon mineralization by 13.3–19.5% noted in the presence of NaHCO 3 compared to water in AC and HC Mg-silicate with and without stirring, is attributed to the buffering effect which aids simultaneous silicate dissolution and carbon mineralization. Enhanced extents of carbon mineralization in the presence of NaHCO 3 correspond to the formation of MgSiO 3 and SiO 2 phases from the starting Mg 2 SiO 4 precursors in AC and HC Mg-silicate. Unlocking these silicate transformations during carbon mineralization by harnessing architected Mg-silicate precursors reveals the feasibility of integrating these chemical pathways with sustainable H 2 conversion pathways with inherent carbon mineralization.

Gao, Xun [Cornell Univ., Ithaca, NY (United States↗

Photoluminescence studies of type-II CdSe/CdTe superlattices

CdSe/CdTe type-II superlattices grown on GaSb substrates by molecular beam epitaxy are studied using time-resolved and steady-state photoluminescence (PL) spectroscopy at 10 K. The relatively long carrier lifetime of 188 ns observed in time-resolved PL measurements shows good material quality. The steady-state PL peak position exhibits a blue shift with increasing excess carrier concentration. Self-consistent solutions of the Schroedinger and Poisson equations show that this effect can be explained by band bending as a result of the spatial separation of electrons and holes, which is critical confirmation of a strong type-II band edge alignment between CdSe and CdTe.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Work function variation of MoS{sub 2} atomic layers grown with chemical vapor deposition: The effects of thickness and the adsorption of water/oxygen molecules

The electrical properties of two-dimensional atomic sheets exhibit remarkable dependences on layer thickness and surface chemistry. Here, we investigated the variation of the work function properties of MoS{sub 2} films prepared with chemical vapor deposition (CVD) on SiO{sub 2} substrates with the number of film layers. Wafer-scale CVD MoS{sub 2} films with 2, 4, and 12 layers were fabricated on SiO{sub 2}, and their properties were evaluated by using Raman and photoluminescence spectroscopies. In accordance with our X-ray photoelectron spectroscopy results, our Kelvin probe force microscopy investigation found that the surface potential of the MoS{sub 2} films increases by ∼0.15 eV when the number of layers is increased from 2 to 12. Photoemission spectroscopy (PES) with in-situ annealing under ultra high vacuum conditions was used to directly demonstrate that this work function shift is associated with the screening effects of oxygen or water molecules adsorbed on the film surface. After annealing, it was found with PES that the surface potential decreases by ∼0.2 eV upon the removal of the adsorbed layers, which confirms that adsorbed species have a role in the variation in the work function.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Femtosecond dynamics of cavity modes in ZnSe films on a metal

The ultrafast evolution of cavity modes in a ZnSe film on a metal (Cr, Cu, or Ni) is studied by femtosecond pump/supercontinuum-probe spectroscopy on a time scale of several tens of femtoseconds. Femtosecond excitation of a microcavity in a ZnSe film on a metal substrate leads to a change in the parameters of cavity (Fabry – Perot) modes. The cavity-mode frequency shifts are due to the photoinduced changes in the boundary conditions and the optical thickness of microcavity. (paper)

36 MATERIALS SCIENCE↗

The observational position of simple non-minimally coupled inflationary scenarios

We consider two classes of non-minimally coupled inflation models; those with a quadratic coupling of the inflaton to gravity, and the 'Universal Attractor' models where the coupling is connected to the potential. We make a detailed analysis of the attractor structure in the latter case, identifying a shift of the attractor from the Starobinsky point and determining conditions for approach to the attractor. We then assess the viability of the models under different interpretations of the BICEP2 experiment's detection of B-mode polarisation, finding strong constraints on the non-minimal coupling in the case where the B-modes have mostly primordial origin.

79 ASTRONOMY AND ASTROPHYSICS↗

Direct Numerical Simulation of Transitional and Turbulent Flows Over Multi-Scale Surface Roughness—Part II: The Effect of Roughness on the Performance of a High-Pressure Turbine Blade

Abstract Turbine blades generally present surface roughness introduced in the manufacturing process or caused by in-service degradation, which can have a significant impact on aero-thermal performance. A better understanding of the fundamental physical mechanisms arising from the interaction between the roughness and the turbine flow at engine-relevant conditions can provide insights for the design of blades with improved efficiency and longer operational life. To this end, a high-fidelity numerical framework combining a well-validated solver for direct numerical simulation and a second-order accurate immersed boundary method is employed to predict roughness-induced aero-thermal effects on an LS89 high-pressure turbine (HPT) blade at engine-relevant conditions. Different amplitudes and distributions of surface roughness are investigated and a reference smooth-blade simulation under the same flow conditions is conducted for comparison. Roughness of increasing amplitude progressively shifts the blade suction side boundary layer transition upstream, producing larger values of the turbulent kinetic energy and higher total wake losses. The on-surface data-capturing capabilities of the numerical framework provide direct measurements of the heat flux and the skin friction coefficient, hence offering quantitative information between the surface topology and engineering-relevant performance parameters. This work may provide a benchmark for future numerical studies of turbomachinery flows with roughness.

Engineering↗

Collaborative Proposal: Improving Decadal Prediction of Arctic Climate Variability and Change Using a Regional Arctic System Model (RASM)

RASM is a multi-disciplinary project, which brings together researchers from six state universities, one military postgraduate school, and one DoE laboratory to address the core modeling objectives of the arctic research community articulated in the Arctic System Modeling report by Roberts et al. (2010b). This report advocates the construction of a regional downscaling tool to generate probabilistic decadal projections of Greenland ice sheet retreat, evolution of arctic sea ice cover, changes in land surface vegetation, and regional processes leading to arctic amplification. Unified coupled models such as RASM are ideal for this purpose because they simulate fine-scale physics, essential for the realistic representation of intra-annual variability, in addition to processes fundamental to long term climatic shifts (Hurrell et al. 2009). By using RASM with boundary conditions from a global model, we can generate many-member ensembles essential for understanding uncertainty in regional climate projections (Hawkins and Sutton 2009). This probabilistic approach is computationally prohibitive for high-resolution global models in the foreseeable future, and also for regional models interactively nested within global simulations. Yet it is fundamental for quantifying uncertainty in decadal forecasts to make them useful for decision makers (Doherty et al. 2009). For this reason, we have targeted development of ensemble generation techniques as a core project task (Task 4.5). Environmental impact assessment specialists need high-fidelity regional ensemble projections to improve the accuracy of their work (Challinor et al. 2009; Moss et al. 2010). This is especially true of the Arctic, where economic, social and national interests are rapidly reshaping the high north in step with regional climate change. During the next decade, considerable oil and gas discoveries are expected across many parts of the marine and terrestrial Arctic (Gautier et al. 2009), the economics of the Northern Sea Route will steadily improve (Arctic Council 2009), and sovereign claims over the Arctic Ocean will increasingly be subject to international negotiations (Proelss 2009). Issues such as these have led to an expanding demand for Arctic climate projections to aid national and commercial decisions. However, detailed information from existing models is lacking. RASM will enhance the existing Arctic system modeling capabilities and align them with the scientific and societal needs outlined above. The science involved in the development of RASM will be integrated with teaching and training at a few different levels. RASM PIs will supervise at least six postdoctoral and doctoral students with additional involvement of undergraduate research assistants. RASM postdoctoral fellows and graduate trainees will benefit from being a part of a large, collaborative, and multi-disciplinary research projects employing state-of-the-art modeling and computational tools. They will also have the opportunity to contribute to the UTEP-led education and outreach effort developed specifically for RASM. The UTEP team will use RASM as a platform for education and outreach. First, we will develop products for public dissemination, such as curriculum units, lesson plans and other materials (simulations, movies, and images) for use by students and teachers in high school and university classrooms. Second, we will facilitate bringing RASM PIs, postdocs, and graduate students into the classroom, through electronic mentorship and by contributing content via online lectures and presentations. Third, by the use of problem-based learning (PBL) approaches, we will provide real-world scenarios and problems enabling students to do research and develop position papers or presentations on topics related to RASM. (Problem-based learning is a student-centered, inquiry-based approach in which students work in teams to solve challenging, open-ended problems.) Fourth, we will develop teacher-training materials that will be developed into workshops (face-to-face or online) to help teachers understand how to use the materials we supply. Overall, we will provide a broad, and long-term RASM program for education and outreach. RASM education and outreach activities will target underrepresented populations - in particular, Hispanic students and teachers. For example, the UTEP student body is more than 70 percent Hispanic and 55 percent female, and the majority of students are the first in their families to attend college. Students from underrepresented groups will be given the chance to expand their understanding of the different scientific knowledge and processes associated with RASM. We will develop an eye-catching RASM website to include information about the project, model results and educational materials, and lists of RASM publications and presentations.

54 ENVIRONMENTAL SCIENCES↗

Considering Soil Biota and Symbioses in Forest Management and Ecosystem Restoration

At the 16th Biennial Conference of Science & Management on the Colorado Plateau & Southwest Region on 12–15 September 2022, the authors hosted a symposium on the topic of “Considering host-microbial interactions in ecosystem restoration”. The goal of this symposium was to showcase studies that demonstrate how soil biota and symbioses can be used to promote forest restoration. Two key principles emerging from the symposium and research on this topic include the following: (1) diverse, native mixes of appropriate soil biota can meaningfully shift forests and plantings towards more successful and ecologically appropriate conditions; (2) context is important to consider in determining the appropriateness of plant and microbial pairings, including the similarity of source material and work sites across a variety of factors. To summarize the literature and discussion on this topic, we offer a graphical depiction of several of the factors to consider.

54 ENVIRONMENTAL SCIENCES↗

Analysis of Fire-Induced Circulations during the FireFlux2 Experiment

Despite recent advances in both coupled fire modeling and measurement techniques to sample the fire environment, the fire–atmosphere coupling mechanisms that lead to fast propagating wildfires remain poorly understood. This knowledge gap adversely affects fire management when wildland fires propagate unexpectedly rapidly and shift direction due to the fire impacts on local wind conditions. In this work, we utilized observational data from the FireFlux2 prescribed burn and numerical simulations performed with a coupled fire–atmosphere model WRF-SFIRE to assess the small-scale impacts of fire on local micrometeorology under moderate wind conditions (10–12 m/s). The FireFlux2 prescribed burn provided a comprehensive observational dataset with in situ meteorological observations as well as IR measurements of fire progression. To directly quantify the effects of fire–atmosphere interactions, two WRF-SFIRE simulations were executed. One simulation was run in a two-way coupled mode in which the heat and moisture fluxes emitted from the fire were injected into the atmosphere, and the other simulation was performed in a one-way coupled mode for which the atmosphere was not affected by the fire. The difference between these two simulations was used to analyze and quantify the fire impacts on the atmospheric circulation at different sections of the fire front. The fire-released heat fluxes resulted in vertical velocities as high as 10.8 m/s at the highest measurement level (20 m above ground level) gradually diminishing with height and dropping to 7.9 m/s at 5.77 m. The fire-induced horizontal winds indicated the strongest fire-induced flow at the lowest measurement levels (as high as 3.3 m/s) gradually decreasing to less than 1 m/s at 20 m above ground level. The analysis of the simulated flow indicates significant differences between the fire-induced circulation at the fire head and on the flanks. The fire-induced circulation was much stronger near the fire head than at the flanks, where the fire did not produce particularly strong cross-fire flow and did not significantly change the lateral fire progression. However, at the head of the fire the fire-induced winds blowing across the front were the strongest and significantly accelerated fire progression. The two-way coupled simulation including the fire-induced winds produced 36.2% faster fire propagation than the one-way coupled run, and more realistically represented the fire progression.

Benik, Jeremy T.↗

SiC/SiC Composites Irradiation Behaviour in Fusion Reactor Environment Conditions

We developed a new method to quantify the He atoms in the SiC/SiC Composites Irradiation Behaviour in Fusion Reactor Environment Conditions. We focus on the cavities measurements of the energy shift of the He K-edge of the electron energy loss spectrum. The method is based on mapping the density of He atoms inside the measured bubbles. Combining with the number density and the average diameter of the cavities, we are able to distinguish and estimate the amount of He atoms in the cavities and in the matrix, respectively. We found that small bubbles contain much higher density of He atoms than the larger ones. At irradiation temperature above 1000oC, all the He atoms are trapped inside the bubbles. On the contrary, it is not the case at the lower irradiation temperature.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Evaluating the Community Land Model in a pine stand with shading manipulations and 13 CO 2 labeling

Carbon partitioning and flow through ecosystems regulates land surface atmosphere CO 2 exchange and thus is a key, albeit uncertain component of mechanistic models. The Partitioning in Trees and Soil (PiTS) experiment-model project tracked C partitioning through a young Pinus taeda stand following pulse-labeling with 13 CO 2 and two levels of shading. The field component of this project provided process-oriented data that was used to evaluate and improve terrestrial biosphere model simulations of rapid shifts in carbon partitioning and hydrological dynamics under varying environmental conditions. Here we tested the performance of the Community Land Model version 4 (CLM4) in capturing short-term carbon and water dynamics in relation to manipulative shading treatments, and the timing and magnitude of carbon fluxes through various compartments of the ecosystem. To constrain CLM4 to closely simulate pretreatment conditions, we calibrated select model parameters with the pretreatment observational data. Compared to CLM4 simulations with default parameters, CLM4 with calibrated model parameters was better able to simulate pretreatment vegetation carbon pools, light response curves, and other initial states and fluxes of carbon and water. Over a 3-week treatment period, the calibrated CLM4 generally reproduced the impacts of shading on average soil moisture at 15-95 cm depth, transpiration, relative change in stem carbon, and soil CO 2 efflux rate, although some discrepancies in the estimation of magnitudes and temporal evolutions existed. CLM4, however, was not able to track the progression of the 13 CO 2 label from the atmosphere through foliage, phloem, roots or surface soil CO 2 efflux, even when optimized model parameters were used. This model bias arises, in part, from the lack of a short-term non-structural carbohydrate storage pool and progressive timing of within-plant transport, thus indicating a need for future work to improve the allocation routines in CLM4. Overall, these types of detailed evaluations of CLM4, paired with intensive field manipulations, can help to identify model strengths and weaknesses, model uncertainties, and additional observations necessary for future model development.

54 ENVIRONMENTAL SCIENCES↗

Vibration testing and analysis using holography

Time average holography is useful in recording steady state vibrational mode patterns. Phase relationships under steady state conditions are measured with real time holography and special phase shifting techniques. Data from Michelson interferometer verify vibration amplitudes from holographic data.

Source record↗