Search NASA⌕ Search

SEARCH · Search NASA

Results for “conditional shift”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Formation of the structure of gold nanoclusters during crystallization

The structure formation in gold nanoparticles 1.6-5.0 nm in diameter is studied by molecular dynamics simulation using a tight-binding potential. The simulation shows that the initial fcc phase in small Au clusters transforms into other structural modifications as temperature changes. As the cluster size increases, the transition temperature shifts toward the melting temperature of the cluster. The effect of various crystallization conditions on the formation of the internal structure of gold nanoclusters is studied in terms of microcanonical and canonical ensembles. The stability boundaries of various crystalline isomers are analyzed. The obtained dependences are compared with the corresponding data obtained for copper and nickel nanoparticles. The structure formation during crystallization is found to be characterized by a clear effect of the particle size on the stability of a certain isomer modification. Nickel and copper clusters are shown to exhibit common features in the formation of their structural properties, whereas gold clusters demonstrate much more complex behavior.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quasifree scattering of electrons on light nuclei and some properties of nuclear interaction

The status of experimental and theoretical studies of the position of the quasifree cross-section maximum in the A (e, e ′) reaction is discussed. The dependence of the shift of the maximum relative to the elastic eN -scattering on the kinematic conditions of measurements is considered. The possibilities of using the data for the selection of realistic models of nucleon-nucleon interaction and dynamic short-range correlations in nuclei, as well as for determining the parameters of the nucleon-nucleus potential and the nucleon effective mass, are analyzed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

1.5-1.6 {mu}m photoluminescence of silicon layers with a high density of lattice defects

This study is concerned with photoluminescence of nanostructured silicon layers that emit radiation in the wavelength range 1.5-1.6 {mu}m due to optical transitions to deep levels of recombination centers produced by crystal lattice defects. It is shown that the dependence of the photoluminescence intensity on the excitation power density is adequately described by the model of deep levels of one type. A shift of the photoluminescence peak to shorter wavelengths with increasing excitation power density is observed. The shift is indicative of changes in the occupancy of deep levels in the conditions of transfer of charge carriers between recombination centers.

36 MATERIALS SCIENCE↗

Causal Interactions between Southern Ocean Polynyas and High-Latitude Atmosphere–Ocean Variability

Abstract Weddell Sea open-ocean polynyas have been observed to occasionally release heat from the deep ocean to the atmosphere, indicating that their sporadic appearances may be an important feature of high-latitude atmosphere–ocean variability. Yet, observations of the phenomenon are sparse and many standard-resolution models represent these features poorly, if at all. We use a fully coupled, synoptic-scale preindustrial control simulation of the Energy Exascale Earth System Model (E3SMv0-HR) to effectively simulate open-ocean polynyas and investigate their role in the climate system. Our approach employs statistical tests of Granger causality to diagnose local and remote drivers of, and responses to, polynya heat loss on interannual to decadal time scales. First, we find that polynya heat loss Granger causes a persistent increase in surface air temperature over the Weddell Sea, strengthening the local cyclonic wind circulation. Along with responding to polynyas, atmospheric conditions also facilitate their development. When the Southern Ocean experiences a rapid poleward shift in the circumpolar westerlies following a prolonged negative phase of the southern annular mode (SAM), Weddell Sea salinity increases, promoting density destratification and convection in the water column. Finally, we find that the reduction of surface heat fluxes during periods of full ice cover is not fully compensated by ocean heat transport into the high latitudes. This imbalance leads to a buildup of ocean heat content that supplies polynya heat loss. These results disentangle the complex, coupled climate processes that both enable the polynya’s existence and respond to it, providing insights to improve the representation of these highly episodic sea ice features in climate models.

Kaufman, Zachary S.↗

Understanding of catalytic transformation of shale gas and development of catalysts with high activity and selectivity through experimental exploration and theoretical simulation

Catalysis on transition metal oxides is equivalently important in contrast to that on metal catalysts in chemical and energy transformations. Understanding of catalytic reactions on early transition metal oxide catalysts is fundamentally intriguing and of great practical interest in efficient production of chemical and fuel feedstocks. Fundamental understanding of catalysis on transition metal oxide-based catalysts has been lagged behind catalysis on metals due to the complexity of chemistry and structure of surface and bulk of oxide catalysts and their structural flexibility in reactive environment at high temperatures. The funded DOE project explored surface chemistry of a few reducible oxides including CeO 2 - based, Co 3 O 4 -based, and CoO-based which are significant for heterogeneous catalysis. Through in-situ studies using ambient pressure X-ray photoelectron spectroscopy and high pressure scanning tunneling microscopy, we revealed phase transformation, the accompanying changes of surface chemistry and structure, and uncovered their correlations with catalytic activity and selectivity in catalytic reactions including reduction of NO with CO, water-gas shift, and chemical transformations of methane to methanol and acetic acid under mild conditions. Driven by the following two facts, we propose to pursue fundamental understanding of oxidative dehydrogenation of ethane and oxidative coupling of methane on oxide catalysts through both in-situ studies of catalyst surfaces during catalysis and computational studies in the renewal proposal. One driving force is the significance of oxidative dehydrogenation of ethane and oxidative coupling of methane for utilization of earth-abundant, relatively inexpensive energy resource and the urgent needs of efficient chemical processes to generate ethylene from shale gas. The other is that exploration of surface chemistry of oxide catalysts during catalysis has remained challenging though it is critical in deeply understanding catalysis on oxide catalysts and developing oxide-based catalysts toward high selectivity and activity. Therefore, the overall objective of the renewal proposal is to mechanistically understand the oxidative dehydrogenation of ethane and oxidative coupling of methane at a molecular level through building correlations between surface chemistry of catalysts during catalysis and the corresponding catalytic performances, and thus design catalysts with high selectivity and activity for production of ethylene with the guidance achieved from these fundamental studies. Experiments were designed to explore the influences of electronic states of cations supported on substrate oxides, cations of surface of the substrate oxides, and surface lattice oxygen atoms of the substrate oxides on their catalytic selectivity and activity. Surface chemistry, including oxidation state of the surface monomers and cations of substrate oxides and density of oxygen vacancies during catalysis, will be tracked with AP-XPS during catalysis. A correlation between surface chemistry of these catalysts at different temperatures and their corresponding catalytic selectivity for production of ethylene and activity will be built. Computational studies will calculate adsorption energies of reactant molecules and their dissociated species and intermediates on the catalyst surface, search transition states, and simulate reaction pathway close to experimental studies. By integrating the computational studies into these correlations to be built from experimental studies, fundamental understanding of the catalytic mechanisms of oxidative dehydrogenation of ethane and oxidative coupling of methane at a molecular level will be achieved. With these insights, new catalysts with high selectivity and activity will be developed.

36 MATERIALS SCIENCE↗

Undulator Hall Air Temperature Fault Scenarios

Recent experience indicates that the LCLS undulator segments must not, at any time following tuning, be allowed to change temperature by more than about {+-}2.5 C or the magnetic center will irreversibly shift outside of acceptable tolerances. This vulnerability raises a concern that under fault conditions the ambient temperature in the Undulator Hall might go outside of the safe range and potentially could require removal and retuning of all the segments. In this note we estimate changes that can be expected in the Undulator Hall air temperature for three fault scenarios: (1) System-wide power failure; (2) Heating Ventilation and Air Conditioning (HVAC) system shutdown; and (3) HVAC system temperature regulation fault. We find that for either a system-wide power failure or an HVAC system shutdown (with the technical equipment left on), the short-term temperature changes of the air would be modest due to the ability of the walls and floor to act as a heat ballast. No action would be needed to protect the undulator system in the event of a system-wide power failure. Some action to adjust the heat balance, in the case of the HVAC power failure with the equipment left on, might be desirable but is not required. On the other hand, a temperature regulation failure of the HVAC system can quickly cause large excursions in air temperature and prompt action would be required to avoid damage to the undulator system.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Novel Geochemistry Determined from High P-T Simulation Experiments of HFTS 2

A standard method in unconventional oil and gas production is the process of hydraulic fracturing followed by a shut-in period, during which the fracture fluid remains pressurized in the reservoir for up to three weeks before production begins. Despite this widely used process, very little is known about what occurs in the reservoir during this shut-in process. In order to properly delineate potential reservoir reactions that may occur during shut-in that would lead to corrosion and scaling events, experiments were conducted in high pressure, high temperature reactors to simulate conditions of the Wolfcamp Formation in the Delaware Basin. Experimental design allowed the assessment of the effect of proppant, microbiology, and time on the mineralogy and fluid chemistry in the reservoir. Results suggest the biggest impact on fluid chemistry and shale mineralogy during shut-in is time. Analyses demonstrate dissolution of the shale material, with maximum dissolved ions occurring after 7 days of the shut-in period. After 21 days, results suggest precipitation occurs. The Delaware Basin is demonstrated to be high in sulfate content, which further increases in the fluid due to dissolution reactions during shut-in. The pressure vessel experiments suggest there was no significant contribution to reactions from microbiology during the shut-in period. However, early production samples demonstrate a significant selection of the microorganism Caminicella, a genus of which has previously been correlated to corrosion and sulfide production. Results suggest shut-in conditions may provide high sulfate concentrations that could later be utilized by a shifted microbial community to drive potential well infrastructure failure. This is the first study to incorporate microbiology, mineralogy, and fluid chemistry to investigate the fundamental geochemical reactions that occur during shut-in and early phase production of the Delaware Basin. Results from this study can complement observations from the Hydraulic Fracture Test Site 2 observations.

Gulliver, Djuna↗

Machine Learning in Power System Operations: Training Data

Reliability and stability of the electric grid today has depended upon operations of the grid which include the protective relay. Today, the electricity sector faces new challenges with the shift of generation resource characteristics away from the traditional “big iron” generation to inverter-based resources (IBR) which shift the physics and assumption used in grid operation and protection. These changing conditions represent new challenges for protective relays (identification of faults) and increased challenges for protection engineers (correct settings and configuration, reduction of mis-operations), both issues recognized in research and industry. Finding new approaches to reduce mis-operations in relaying and new approaches to fault identification is critical to grid operations. Using today’s modern technology of embedded systems, edge computing, machine learning (ML), and communications we can help address challenges and augment and improve on existing power system operations methodologies.

24 POWER TRANSMISSION AND DISTRIBUTION↗

CTF Parallel Performance Improvements

CTF is a modernized version of COBRA-TF (Coolant Boiling in Rod Arrays-Two Fluid), which is a thermal hydraulic (T/H) sub-channel code based on a two-phase, two-fluid model that formulates the conservation equations of mass, energy, and momentum for three fields of vapor, continuous liquid, and entrained liquid droplets. Under the Consortium for Advanced Simulation of Light Water Reactors (CASL) program sponsored by the U.S. Department of Energy, CTF is being further developed and improved for modeling and simulation of light water reactors. The code improvements for predicting T/H responses of pressurized water reactor (PWR) cores are focused on its applications to specific challenge problems deemed significant to the industry, such as departure from nucleate boiling (DNB) and crud-induced power shift. The code is also being used for T/H feedback in normal operating condition depletions in PWR and boiling water reactor designs in the reactor core simulator, Virtual Environment for Reactor Applications Core Simulator (VERA-CS), being developed by CASL. CTF modifications under the CASL program include software optimization, new closure models, and parallelization for modeling full reactor core T/H responses. The purpose of this work was to improve the parallel performance of CTF. CTF was originally parallelized via a domain-decomposition strategy using the Message Passing Interface (MPI), in which the basis of a solution domain was a physical assembly in the model. In other words, a user who wanted to perform a parallel solution with CTF had to provide the code one processor per assembly in the model (e.g., 56 cores for a 56 assembly quarter-core model, or 193 cores for a 193 assembly full-core model). This design was rigid, demanding a very specific number of processors for a model; furthermore, when CTF was run in VERA-CS-which typically uses thousands of processors- many processors sat idle during the CTF solve because CTF was unable to use any more processors than there are physical assemblies. This was not necessarily a problem if the CTF execution speed was very fast, but the average time spent in a CTF solve for prototypical PWR operating conditions was significant (i.e., over 20 % of the simulation wall time was being spent in CTF for a standard core depletion simulation). Larger, more computationally intensive simulations performed in support of the CASL DNB challenge problem demonstrated a need for improvements in this original parallelization approach. The specific goal of this work was to allow CTF to use more processors than there are physical assemblies in the model, which would not only speed up CTF and improve the overall efficiency of VERA-CS but also give users more-flexible options for executing their simulations. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Temporal dynamics of CO 2 and CH 4 loss potentials in response to rapid hydrological shifts in tidal freshwater wetland soils

Earth System Models predict climate extremes that will impact regional and global hydrology. Aquatic-terrestrial transition zones like wetlands are subjected to the immediate consequence of climate change with shifts in the magnitude and dynamics of hydrologic flow. Such fluctuating hydrology can alter the nature and rate of biogeochemical transformations and significantly impact the carbon balance of the ecosystem. We tested the impacts of fluctuating hydrology and, specifically, the role of antecedent moisture conditions in determining the dominant carbon loss mechanisms in soils sampled from a tidal freshwater wetland system in the lower Columbia River, WA, USA. Our objective was to understand shifts in biogeochemical processes in response to changing soil moisture, based on soil respiration and methane production rates, and to elucidate such responses based on the observed electron acceptor and metabolite profiles under laboratory conditions. Metabolomics and biogeochemical process rates provided evidence that soil redox was the principal factor driving metabolic function. Fluctuating redox conditions altered terminal electron acceptor and donor availability and recovery strengths of their concentrations in soil such that a disproportionate release of carbon dioxide stemmed from alternative anaerobic degradation processes like sulfate and iron reduction compared to carbon loss due to methano genesis. Our results show that extended and short-term saturation created conditions conducive to increasing metabolite availability for anaerobic decomposition processes, with a significant lag in methanogenesis. In contrast,extended drying caused a cellular-level stress response and rapid recycling of alternate electron acceptors.

anaerobic respiration, tidal wetlands, methane pro↗

Activity-based cell sorting reveals responses of uncultured archaea and bacteria to substrate amendment

Metagenomic studies have revolutionized our understanding of the metabolic potential of uncultured microorganisms in various ecosystems. However, many of these genomic predictions have yet to be experimentally tested, and the functional expression of genomic potential often remains unaddressed. In order to obtain a more thorough understanding of cell physiology, novel techniques capable of testing microbial metabolism under close to in situ conditions must be developed. Here, we provide a benchmark study to demonstrate that bioorthogonal non-canonical amino acid tagging (BONCAT) in combination with fluorescence-activated cell sorting (FACS) and 16S rRNA gene sequencing can be used to identify anabolically active members of a microbial community incubated in the presence of various growth substrates or under changing physicochemical conditions. We applied this approach to a hot spring sediment microbiome from Yellowstone National Park (Wyoming, USA) and identified several microbes that changed their activity levels in response to substrate addition, including uncultured members of the phyla Thaumarchaeota, Acidobacteria, and Fervidibacteria. Because shifts in activity in response to substrate amendment or headspace changes are indicative of microbial preferences for particular growth conditions, results from this and future BONCAT-FACS studies could inform the development of cultivation media to specifically enrich uncultured microbes. Most importantly, BONCAT-FACS is capable of providing information on the physiology of uncultured organisms at as close to in situ conditions as experimentally possible.

59 BASIC BIOLOGICAL SCIENCES↗

Active galactic nuclei emission line diagnostics and the mass-metallicity relation up to redshift z ∼ 2: The impact of selection effects and evolution

Emission line diagnostic diagrams probing the ionization sources in galaxies, such as the Baldwin-Phillips-Terlevich (BPT) diagram, have been used extensively to distinguish active galactic nuclei (AGN) from purely star-forming galaxies. However, they remain poorly understood at higher redshifts. We shed light on this issue with an empirical approach based on a z ∼ 0 reference sample built from ∼300,000 Sloan Digital Sky Survey galaxies, from which we mimic selection effects due to typical emission line detection limits at higher redshift. We combine this low-redshift reference sample with a simple prescription for luminosity evolution of the global galaxy population to predict the loci of high-redshift galaxies on the BPT and Mass-Excitation (MEx) diagnostic diagrams. The predicted bivariate distributions agree remarkably well with direct observations of galaxies out to z ∼ 1.5, including the observed stellar mass-metallicity (MZ) relation evolution. As a result, we infer that high-redshift star-forming galaxies are consistent with having normal interstellar medium (ISM) properties out to z ∼ 1.5, after accounting for selection effects and line luminosity evolution. Namely, their optical line ratios and gas-phase metallicities are comparable to that of low-redshift galaxies with equivalent emission-line luminosities. In contrast, AGN narrow-line regions may show a shift toward lower metallicities at higher redshift. While a physical evolution of the ISM conditions is not ruled out for purely star-forming galaxies and may be more important starting at z ≳ 2, we find that reliably quantifying this evolution is hindered by selections effects. The recipes provided here may serve as a basis for future studies toward this goal. Code to predict the loci of galaxies on the BPT and MEx diagnostic diagrams and the MZ relation as a function of emission line luminosity limits is made publicly available.

79 ASTRONOMY AND ASTROPHYSICS↗

Comparison of MPC Formulations for Building Control under Commercial Time-of-Use Tariffs

© 2019 IEEE. Most medium and large commercial buildings in the U.S. are subject to complex electricity tariffs that combine both Time-of-Use (TOU) energy and demand charges. This study analyses the performances of different economic Model Predictive Control (MPC) formulations, from the standpoints of monthly bill reduction, load shifting, and peak demand reduction. Simulations are performed on many simplified commercial building models, with multiple TOU demand charges, and under various summer conditions. Results show that compared to energy-only MPC, the traditional method for dealing with demand charges significantly reduces peak demand and owner bill, however, highlight a lack of load shifting capability. A proposed incremental approach is presented, which better balances the bill components in the objective function. In the case study presented, this method can improve monthly bill savings and increase load shifting during demand response events, while keeping a similarly low peak demand, compared to traditional MPC methods taking into account demand charges.

Cutsem, Olivier Van↗

An Analytical Time–Domain Expression for the Net Ripple Produced by Parallel Interleaved Converters

We apply modular arithmetic and Fourier series to analyze the superposition of N interleaved triangular waveforms with identical amplitudes and duty-ratios. Here, interleaving refers to the condition when a collection of periodic waveforms with identical periods are each uniformly phase-shifted across one period. The main result is a time-domain expression which provides an exact representation of the summed and interleaved triangular waveforms, where the peak amplitude and parameters of the time-periodic component are all specified in closed-form. Analysis is general and can be used to study various applications in multi-converter systems. This model is unique not only in that it reveals a simple and intuitive expression for the net ripple, but its derivation via modular arithmetic and Fourier series is distinct from prior approaches. The analytical framework is experimentally validated with a system of three parallel converters under time-varying operating conditions.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Measuring Local Electric Fields and Local Charge Densities at Electrode Surfaces Using Graphene-Enhanced Raman Spectroscopy (GERS)-Based Stark-Shifts

Here, we report spectroscopic measurements of the local electric fields and local charge densities at electrode surfaces using graphene-enhanced Raman spectroscopy (GERS) based on the Stark-shifts of surface-bound molecules and the G band frequency shift in graphene. Here, monolayer graphene is used as the working electrode in a three-terminal potentiostat while Raman spectra are collected in situ under applied electrochemical potentials using a water immersion lens. First, a thin layer (1 Å) of copper(II) phthalocyanine (CuPc) molecules are deposited on monolayer graphene by thermal evaporation. GERS spectra are then taken in an aqueous solution as a function of the applied electrochemical potential. The shifts in vibrational frequencies of the graphene G band and CuPc are obtained simultaneously and correlated. The upshifts in the G band Raman mode are used to determine the free carrier density in the graphene sheet under these applied potentials. Of the three dominant peaks in the Raman spectra of CuPc (i.e., 1531, 1450, and 1340 cm –1 ), only the 1531 cm –1 peak exhibits Stark-shifts and can, thus, be used to report the local electric field strength at the electrode surface under electrochemical working conditions. Between applied electrochemical potentials from -0.8 V to 0.8 V vs NHE, the free carrier density in the graphene electrode spans a range from -4 × 10 12 cm –2 to 2 × 10 12 cm –2 . Corresponding Stark-shifts in the CuPc peak around 1531 cm –1 are observed up to 1.0 cm –1 over a range of electric field strengths between -3.78 × 10 6 and 1.85 × 10 6 V/cm. Slightly larger Stark-shifts are observed in a 1 M KCl solution, compared to those observed in DI water, as expected based on the higher ion concentration of the electrolyte. Based on our data, we determine the Stark shift tuning rate to be 0.178 cm –1 / (10 6 V/cm), which is relatively small due to the planar nature of the CuPc molecule, which largely lies perpendicular to the electric field at this electrode surface. Computational simulations using density functional theory (DFT) predict similar Stark shifts and provide a detailed atomistic picture of the electric field-induced perturbations to the surface-bound CuPc molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chirped elliptically polarised cnoidal waves and polarisation 'chaos' in an isotropic medium with spatial dispersion of cubic nonlinearity

It is found that chirped elliptically polarised cnoidal waves can propagate and aperiodic regimes, resembling polarisation chaos, can emerge in an isotropic medium with local and nonlocal components of cubic nonlinearity and second-order frequency dispersion. In the particular case of the formation of the waveguides of the same profile for two circularly polarised components of the light field relevant analytical solutions are derived and the frequencies of chirped components are shown to vary in concord with periodic changes of their intensities. In this case, the nature of the changes in the polarisation state during the light wave propagation depends on the values of nonlinear phase shifts of circularly polarised components of the field during the period and is sensitive to changes in the initial conditions. (nonlinear optical phenomena)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Viable wormhole solutions and Noether symmetry in f(R,T) gravity

This paper investigates wormhole solutions of spherically symmetric spacetime via Noether symmetry approach in ƒ(R,T) gravity. For this purpose, we choose ƒ(R,T) models appreciating indirect curvature–matter coupling and examine symmetry generators with associated conserved quantities. We determine possible existence of realistic traversable wormhole solutions for both dust as well as non-dust distributions and also study stable behavior of these solutions. For both models, we use constant as well as variable forms of red-shift function. To analyze physical existence of wormhole solutions, we study the behavior of null/weak energy conditions with respect to ordinary as well as effective energy–momentum tensors. It is concluded that there exist physically viable traversable as well as stable wormhole solutions in most of the cases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Context dependent fungal and bacterial soil community shifts in response to recent wildfires in the Southern Appalachian Mountains

Decades of fire suppression coupled with changing climatic conditions have increased the frequency and intensity of wildfires. Here, the Southern Appalachia region of the United States is predicted to be particularly susceptible to climatic changes, with predicted increases in fire severity and occurrence. Following the record breaking fire season in 2016 in Southern Appalachia, we examined wildfire impacts on soil chemistry and below ground communities (fungi and bacteria – Illumina MiSeq) within two substrates (duff and soil) at two adjacent locations with similar plant communities (Great Smoky Mountains National Park – ‘Chimney Top 2’ Fire (GRSM) and Nantahala National Forest – ‘Cliffside’ Fire (NNF)) from replicate plots representing a range of fire severities (unburned, low severity, moderate severity, severe). Differing fire severities changed community composition, and fire severity played a stronger role in structuring bacterial communities than in structuring fungal communities. Further, fire impacts on soil communities and functional guilds responses were location- and substrate-specific with NNF responding more strongly to fire than GRSM. Additionally, using a novel analysis tool (Axis Weighted Ordination Distance – AWOrD), domain and location specific responses to wildfire severity are demonstrated. Taken together, our results suggest context-dependency in microbial responses to fire that must be accounted for to generate ecosystem-wide recovery predictions.

54 ENVIRONMENTAL SCIENCES↗