Search NASA⌕ Search

SEARCH · Search NASA

Results for “delta method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Interactions Between Oxygen and Nitrogen: O[Single Bond]N, O[Single Bond]N (sub 2), and O (sub 2)[Single Bond]N (sub 2)

Potential energy curves for 0-N interactions corresponding to the X (sup 2) II (sub t/2), X (sup 2) II (sub 3/2), A (sup 2) Eta (sup plus), B (sup 2) II, C (sup 2) II, D (sup 2) Eta (sup plus), E (sup 2) Eta (sup plus), and B prime (sup 2 delta) states of nitric oxide have been calculated from spectroscopic data by the Rydberg- Klein-Rees method. Curves for the (sup 4) II, (sup 2) Eta, (sup 4) Eta, (sup 6) Eta, and (sup 6) II states have been obtained from limited spectroscopic results and from relations derived from approximate quantum-mechanical calculations. Two semi-independent calculations have been made, and are in good agreement with each other. The quantum-mechanical relations also lead to approximate curves for the O[Single Bond]N, and O[Single Bond]N (sub 2) interactions over a limited range. The O (sub 2)[Single Bond]N (sub 2) interaction is consistent with one valid at larger separation distances which has been derived from high-temperature gas viscosity data.

Vanderslice, Joseph T.↗

A step closer to visualizing the electron___phonon interplay

The origin of the very high superconducting transition temperature (Tc) in ceramic copper oxide superconductors is one of the greatest mysteries in modern physics. In the superconducting state, electrons form pairs (known as Cooper pairs) and condense into the superfluid state to conduct electric current with zero resistance. For conventional superconductors, it is well established that the 2 electrons in a Cooper pair are 'bonded' by lattice vibrations (phonons), whereas in high-Tc superconductors, the 'glue' for the Cooper pairs is still under intense discussion. Although the high transition temperature and the unconventional pairing symmetry (d-wave symmetry) have led many researchers to believe that the pairing mechanism results from electron-electron interaction, increasing evidence shows that electron-phonon coupling also significantly influences the low-energy electronic structures and hence may also play an important role in high-Tc superconductivity. In a recent issue of PNAS, Carbone et al. use ultrafast electron diffraction, a recently developed experimental technique, to attack this problem from a new angle, the dynamics of the electronic relaxation process involving phonons. Their results provide fresh evidence for the strong interplay between electronic and atomic degrees of freedom in high-Tc superconductivity. In general, ultrafast spectroscopy makes use of the pump-probe method to study the dynamic process in material. In such experiments, one first shoots an ultrafast (typically 10-100 fs) 'pumping' pulse at the sample to drive its electronic system out of the equilibrium state. Then after a brief time delay ({Delta}t) of typically tens of femtoseconds to tens of picoseconds, a 'probing' pulse of either photons or electrons is sent in to probe the sample's transient state. By varying {Delta}t, one can study the process by which the system relaxes back to the equilibrium state, thus acquiring the related dynamic information. This pump-probe experiment is reminiscent of the standard method used by bell makers for hundreds of years to judge the quality of their products (hitting a bell then listening to how the sound would fade away), albeit the relevant time scale here is way beyond tens of femtoseconds. Traditionally, ultrafast spectroscopy was carried out to study gas-phase reactions, but it has also been applied to study condensed phase systems since the development of reliable solid-state ultrafast lasers approximately a decade ago. In addition, the ability to control pulse width, wavelength, and amplification of the output of Ti:Sapphire lasers has further increased the capability of this experimental method. During the past decade, many ultrafast pump-probe experiments have been carried out in various fields by using different probing methods, such as photo-resistivity, fluorescence yield, and photoemission, and they have revealed much new information complementary to the equilibrium spectroscopy methods used before. Carbone et al. used the photon-pump, electron (diffraction)-probe method. The pumping photon pulse first drives the electrons in the sample into an oscillating mode along its polarization direction. Then during the delay time, these excited electrons can transfer excess energy to the adjacent nuclei and cause crystal lattice vibration on their way back to the equilibrium state. An ultrashort electron pulse is shot at the sample at various time delays {Delta}t and the diffraction pattern is collected. Because the electron diffraction pattern is directly related to the crystal lattice structure and its motion, this technique provides a natural way to study the electron-phonon coupling problem. Furthermore, by adjusting the pump pulse's relative polarization with respect to the Cu-O bond direction, Carbone et al. were able to acquire the electron-phonon coupling strength along different directions. Focusing on the lattice dynamic along the c axis, Carbone et al. found that the c-axis phonons in the optimally-doped Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8} (Bi2212) are coupled to the electrons with different strength along different directions within the CuO{sub 2} plane. The coupling strength reaches its largest value along the 2 Cu-O bond directions and becomes the weakest along the bisector of the angle formed by the 2 Cu-O bonds. As pointed out by Carbone et al., these observations agree well with the calculated coupling strength between electrons and the buckling phonons. Furthermore, their observation of this anisotropic electron-phonon coupling also agrees with results from angle-resolved photoemission (ARPES), which measures the equilibrium-state properties of materials. In ARPES measurements, electron-phonon coupling manifests itself as a kink anomaly in the band dispersion and a corresponding sudden broadening in the spectral width.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Incommensurately modulated LT''-Ni{sub 1+{delta}}Sn (delta=0.60, 0.63): Rietveld refinement, line-broadening analysis and structural relation with LT- and LT'-Ni{sub 1+{delta}}Sn

X-ray powder diffraction data of NiAs/Ni{sub 2}In-type Ni{sub 1.60}Sn and Ni{sub 1.63}Sn alloys annealed at or below about 573 K reveal the development of an incommensurately ordered phase called LT''. In this phase Ni(2) atoms occupy partially the trigonal-bipyramidal interstices formed by five Sn within an NiAs-type arrangement Ni(1)Sn. The modulated occupational ordering of Ni(2) in the LT'' phase can be described in the superspace group Cmcm(alpha00)0 s 0, and the parameters describing this occupational modulation were refined together with atomic displacement modulations using the Rietveld method. The structure parameters revealed close structural analogies of the LT'' phase with the previously reported commensurate LT-Ni{sub 1+{delta}}Sn and incommensurate LT'-Ni{sub 1+{delta}}Sn phases (A. Leineweber, J. Solid State Chem. 177 (2004) 1197-1212), which both occur for lower Ni contents than the LT'' phase. The 1st-order satellite reflections visible in the powder-diffraction patterns exhibit, with respect to the fundamental reflections, a considerable diffraction-line broadening, caused by a small size of the particularly ordered domains. This small-domain-size broadening was successfully described by a recently developed reflection-index (hklm) dependent (anisotropic) line-broadening model (A. Leineweber, V. Petricek, J. Appl. Crystallogr. 40 (2007) 1027-1034) designed to consider the effect of fluctuations of the lattice metrics on the peak widths in powder diffraction patterns of incommensurately modulated crystal structures. The small domain sizes encountered for the LT'' phase indicate that domain coarsening is much more difficult than for the LT and LT' phases. This special feature of the LT'' phase goes along with a compared to the LT and LT' phases absent orthorhombic distortion and the low ordering temperature, which are discussed as a consequence of the ordering patterns due to the Ni(2) atoms. - Graphical abstract: Approximant structure of incommensurately modulated LT''-Ni{sub 1.60}Sn, forming below 573 K from the disordered phase. The phase has a close structural relationship to the LT and LT' phases occurring at lower Ni contents.

36 MATERIALS SCIENCE↗

Synthesis of Lanthanum Tungsten Oxynitride Perovskite Thin Films

Ternary metal-oxide material systems commonly crystallize in the perovskite crystal structure, which is utilized in numerous electronic applications. In contrast to oxides, there are no known nitride perovskites, likely due to the competition with oxidation, which makes the formation of pure nitride materials difficult and synthesis of oxynitride materials more common. While deposition of oxynitride perovskite thin films is important for many electronic applications, it is difficult to control oxygen and nitrogen stoichiometry. Lanthanum tungsten oxynitride (LaWN3-..delta..O..delta..) thin films with varying La:W ratio are synthesized by combinatorial sputtering and characterized for their chemical composition, crystal structure, and microstructure. A three-step synthesis method, which involves co-sputtering, capping layer deposition, and rapid thermal annealing, is established for producing crystalline thin films while minimizing the oxygen content. Elemental depth profiling results show that the cation-stoichiometric films contain approximately one oxygen for every five nitrogen (..delta.. = 0.5). Synchrotron-based diffraction indicates a tetragonal perovskite crystal structure. These results are discussed in terms of the perovskite tolerance factors, octahedral tilting, and bond valence. Overall, this synthesis and characterization is expected to pave the way toward future thin film property measurements of lanthanum tungsten oxynitrides and eventual synthesis of oxygen-free nitride perovskites.

14 SOLAR ENERGY↗

Multi-tracer investigation of river and groundwater interactions: a case study in Nalenggele River basin, northwest China

Environmental tracers (such as major ions, stable and radiogenic isotopes, and heat) monitored in natural waters provide valuable information for understanding the processes of river–groundwater interactions in arid areas. An integrated framework is presented for interpreting multi-tracer data (major ions, stable isotopes ({sup 2}H, {sup 18}O), the radioactive isotope {sup 222}Rn, and heat) for delineating the river–groundwater interactions in Nalenggele River basin, northwest China. Qualitative and quantitative analyses were undertaken to estimate the bidirectional water exchange associated with small-scale interactions between groundwater and surface water. Along the river stretch, groundwater and river water exchange readily. From the high mountain zone to the alluvial fan, groundwater discharge to the river is detected by tracer methods and end-member mixing models, but the river has also been identified as a losing river using discharge measurements, i.e. discharge is bidirectional. On the delta-front of the alluvial fan and in the alluvial plain, in the downstream area, the characteristics of total dissolved solids values, {sup 222}Rn concentrations and δ{sup 18}O values in the surface water, and patterns derived from a heat-tracing method, indicate that groundwater discharges into the river. With the environmental tracers, the processes of river–groundwater interaction have been identified in detail for better understanding of overall hydrogeological processes and of the impacts on water allocation policies.

58 GEOSCIENCES↗

Comparison of the sensitivities of the parameters with atmospheric neutrinos for different analysis methods

In the atmospheric neutrino experiments the primary problems are the huge uncertainties of flux, very rapid fall of flux with increase of energy, the energy dependent wide resolutions of energy and zenith angle between true neutrinos and reconstructed neutrinos. These all in together make the choice of binning of the data for chi-square analysis complicated. The large iron calorimeter has the ability to measure the energy and the direction of the muon with high resolution. From the bending of the track in the magnetic field it can also distinguish its charge. We have analyzed the atmospheric neutrino oscillation generating events by Nuance and then considering the muons produced in the charge current interactions as the reconstructed neutrinos. This practically takes into account the major problem of wide resolutions. We have binned the data in three ways: (i) in the grids of logE-logL plane, (ii) in the grids of logE-cos{theta}{sub zenith} plane, and (iii) in the bins of log(L/E). We have performed a marginalized {chi}{sup 2} study over {delta}m{sub 32}{sup 2}, {theta}{sub 13} and {theta}{sub 23} for neutrinos and antineutrinos separately for each method and finally compared the results.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

An Immersed Boundary method with divergence-free velocity interpolation and force spreading

The Immersed Boundary (IB) method is a mathematical framework for constructing robust numerical methods to study fluid–structure interaction in problems involving an elastic structure immersed in a viscous fluid. The IB formulation uses an Eulerian representation of the fluid and a Lagrangian representation of the structure. The Lagrangian and Eulerian frames are coupled by integral transforms with delta function kernels. The discretized IB equations use approximations to these transforms with regularized delta function kernels to interpolate the fluid velocity to the structure, and to spread structural forces to the fluid. It is well-known that the conventional IB method can suffer from poor volume conservation since the interpolated Lagrangian velocity field is not generally divergence-free, and so this can cause spurious volume changes. In practice, the lack of volume conservation is especially pronounced for cases where there are large pressure differences across thin structural boundaries. The aim of this paper is to greatly reduce the volume error of the IB method by introducing velocity-interpolation and force-spreading schemes with the properties that the interpolated velocity field in which the structure moves is at least $\mathscr{C}$ 1 and satisfies a continuous divergence-free condition, and that the force-spreading operator is the adjoint of the velocity-interpolation operator. We confirm through numerical experiments in two and three spatial dimensions that this new IB method is able to achieve substantial improvement in volume conservation compared to other existing IB methods, at the expense of a modest increase in the computational cost. Further, the new method provides smoother Lagrangian forces (tractions) than traditional IB methods. Finally, the method presented here is restricted to periodic computational domains. Its generalization to non-periodic domains is important future work.

97 MATHEMATICS AND COMPUTING↗

3D Sedimentological and geophysical studies of clastic reservoir analogs: Facies architecture, reservoir properties, and flow behavior within delta front facies elements of the Cretaceous Wall Creek Member, Frontier Formation, Wyoming

Significant volumes of oil and gas occur in reservoirs formed by ancient river deltas. This has implications for the spatial distribution of rock types and the variation of transport properties. A between mudstones and sandstones may form baffles that influence productivity and recovery efficiency. Diagenetic processes such as compaction, dissolution, and cementation can also alter flow properties. A better understanding of these properties and improved methods will allow improved reservoir development planning and increased recovery of oil and gas from deltaic reservoirs. Surface exposures of ancient deltaic rocks provide a high-resolution view of variability. Insights gleaned from these exposures can be used to model analogous reservoirs, for which data is sparser. The Frontier Formation in central Wyoming provides an opportunity for high-resolution models. The same rocks exposed in the Tisdale anticline are productive in nearby oil fields. Kilometers of exposure are accessible, and bedding-plane exposures allow use of high-resolution ground-penetrating radar. This study combined geologic interpretations, maps, vertical sections, core data, and ground-penetrating radar to construct geostatistical and flow models. Strata-conforming grids were use to reproduce the observed geometries. A new Bayesian method integrates outcrop, core, and radar amplitude and phase data. The proposed method propagates measurement uncertainty and yields an ensemble of plausible models for calcite concretions. These concretions affect flow significantly. Models which integrate more have different flow responses from simpler models, as demonstrated an exhaustive two-dimensional reference image and in three dimensions. This method is simple to implement within widely available geostatistics packages. Significant volumes of oil and gas occur in reservoirs that are inferred to have been formed by ancient river deltas. This geologic setting has implications for the spatial distribution of rock types (\Eg sandstones and mudstones) and the variation of transport properties (\Eg permeability and porosity) within bodies of a particular rock type. Both basin-wide processes such as sea-level change and the autocyclicity of deltaic processes commonly cause deltaic reservoirs to have large variability in rock properties; in particular, alternations between mudstones and sandstones may form baffles and trends in rock body permeability can influence productivity and recovery efficiency. In addition, diagenetic processes such as compaction, dissolution, and cementation can alter the spatial pattern of flow properties. A better understanding of these properties, and improved methods to model the properties and their effects, will allow improved reservoir development planning and increased recovery of oil and gas from deltaic reservoirs. Surface exposures of ancient deltaic rocks provide a high resolution, low uncertainty view of subsurface variability. Patterns and insights gleaned from these exposures can be used to model analogous reservoirs, for which data is much sparser. This approach is particularly attractive when reservoir formations are exposed at the surface. The Frontier Formation in central Wyoming provides an opportunity for high resolution characterization. The same rocks exposed in the vicinity of the Tisdale anticline are productive in nearby oil fields, including Salt Creek. Many kilometers of good-quality exposure are accessible, and the common bedding-plane exposures allow use of shallow-penetration, high-resolution electromagnetic methods known as ground-penetrating radar. This study combined geologic interpretations, maps, vertical sections, core data, and ground-penetrating radar to construct high-resolution geostatistical and flow models for the Wall Creek Member of the Frontier Formation. Stratal-conforming grids were use to reproduce the progradational and aggradational geometries observed in outcrop and radar data. A new, Bayesian method integrates outcrop--derived statistics, core observations of concretions, and radar amplitude and phase data. The proposed method consistently propagates measurement uncertainty through the model-building process, and yields an ensemble of plausible models for diagenetic calcite concretions. These concretions have a statistically significant on flow. Furthermore, neither geostatistical data from the outcrops nor geophysical data from radar is sufficient: models which integrate these data have significantly different flow responses. This was demonstrated both for an exhaustive two-dimensional reference image and in three dimensions, using flow simulations. This project wholly supported one PhD student and part of the education of an additional MS and PhD student. It helped to sponsor 6 refereed articles and 8 conference or similar presentations.

02 PETROLEUM↗

SU-E-T-69: Cloud-Based Monte Carlo Patient-Specific Quality Assurance (QA) Method for Volumetric Modulated Arc Therapy (VMAT)

Purpose: Patient-specific QA for VMAT is incapable of providing full 3D dosimetric information and is labor intensive in the case of severe heterogeneities or small-aperture beams. A cloud-based Monte Carlo dose reconstruction method described here can perform the evaluation in entire 3D space and rapidly reveal the source of discrepancies between measured and planned dose. Methods: This QA technique consists of two integral parts: measurement using a phantom containing array of dosimeters, and a cloud-based voxel Monte Carlo algorithm (cVMC). After a VMAT plan was approved by a physician, a dose verification plan was created and delivered to the phantom using our Varian Trilogy or TrueBeam system. Actual delivery parameters (i.e., dose fraction, gantry angle, and MLC at control points) were extracted from Dynalog or trajectory files. Based on the delivery parameters, the 3D dose distribution in the phantom containing detector were recomputed using Eclipse dose calculation algorithms (AAA and AXB) and cVMC. Comparison and Gamma analysis is then conducted to evaluate the agreement between measured, recomputed, and planned dose distributions. To test the robustness of this method, we examined several representative VMAT treatments. Results: (1) The accuracy of cVMC dose calculation was validated via comparative studies. For cases that succeeded the patient specific QAs using commercial dosimetry systems such as Delta- 4, MAPCheck, and PTW Seven29 array, agreement between cVMC-recomputed, Eclipse-planned and measured doses was obtained with >90% of the points satisfying the 3%-and-3mm gamma index criteria. (2) The cVMC method incorporating Dynalog files was effective to reveal the root causes of the dosimetric discrepancies between Eclipse-planned and measured doses and provide a basis for solutions. Conclusion: The proposed method offers a highly robust and streamlined patient specific QA tool and provides a feasible solution for the rapidly increasing use of VMAT treatments in the clinic.

60 APPLIED LIFE SCIENCES↗

Application of vortex embedding to aircraft flows

A combined Eulerian/Lagrangian 'vortex embedding' method was applied to two cases. The first case involved compressible flow over a realistic fighter aircraft (X-29 fighter) at low angle of attack, for both subsonic and transonic speeds, with shock. Good agreement was obtained for computed wing surface pressures when compared to flight test data. The second case involved incompressible flow over a delta wing with round leading edges at moderate angles of attack. Strong, concentrated vortices were shown to be shed from the leading edge. The vortex embedding method appears to be an efficient solution procedure for cases where well-defined vortex sheets are shed from surfaces.

Steinhoff, John↗

Correlation of the neutron yield anisotropy with the electrical characteristics of a plasma focus discharge

The anisotropy of the yield and energy of neutrons generated in a small-size plasma focus chamber with a total neutron yield of about 4 x 10{sup 9} DD neutrons per shot was investigated experimentally. The neutrons were recorded using scintillation detectors on a 3-m-long flight base. The measurements were performed at the angles 0{sup o} and 90{sup o} with respect to the chamber axis. The maximum neutron energy measured by the time-of-flight method at the angles 0{sup o} and 90{sup o} was found to be 2.8 and 2.5 MeV, respectively. The measured anisotropy of the neutron yield was in the range 1.15-1.88. The integral DD neutron yield of the source was measured using the activation method (by activating silver isotopes). It is found that the neutron yield and the yield anisotropy depend linearly on the discharge current jump {Delta}I at the instant of neutron generation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Point defects diagrams for pure and doped copper oxide Cu{sub 2{+-}{delta}}O in the temperature range of 873-1473 K

Point defects diagrams for the Cu{sub 2{+-}{delta}}O, both pure and doped with M{sup 2+} metal ions with all the types of defects in the cation sublattice considered are presented in this work. The calculations of the diagrams were performed by a novel method. The calculations were based on the data from the results of the studies of the deviation from stoichiometry and the electrical conductivity in the temperature range of 873-1473 K. The values of {Delta}G{sup o} of the formation of Frenkel-type defects, of copper vacancies, and of interstitial copper atoms were determined and their temperature dependence. It was shown that character of the dependence of the sum of concentrations of electronic defects ([h{sup Bullet }]+b[e Prime ]) on p{sub O{sub 2}} is fully consistent with its dependence of the electrical conductivity. Their mobility ({mu}{sub e}/{mu}{sub h}=b), vary from 1300 to 30. The dope M{sup 2+} increases the concentration of electrons and shifts the minimum of electrical conductivity toward higher oxygen pressures. - Graphical abstract: This work presents point defects diagrams for the Cu{sub 2{+-}{delta}}O, with all the types of defects in the cation sublattice considered. Highlights: Black-Right-Pointing-Pointer The point defects diagrams. Copper oxide Cu{sub 2{+-}{delta}}O, for pure and M{sup 2+} doped. Black-Right-Pointing-Pointer The values of {Delta}G{sup o} of the formation of Frenkel-type defects were determined. Black-Right-Pointing-Pointer The values of {Delta}G{sup o} of the formation QUOTE QUOTE of singly-ionized copper vacancies were determined. Black-Right-Pointing-Pointer The values of {Delta}G{sup o} of the formation of electroneutral copper vacancies were determined. Black-Right-Pointing-Pointer The values of {Delta}G{sup o} of the formation and of interstitial copper atoms were determined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Sm and Mg co-doping on the properties of ceria-based electrolyte materials for IT-SOFCs

Samples of Sm and Mg co-doped ceria electrolytes of Ce{sub 0.8}Sm{sub 0.2-x}Mg{sub x}O{sub 2-{delta}} (x = 0, 0.05, 0.10, 0.15 and 0.20) were sintered from powders obtained by solid-state reaction method. The structures and electrical properties were characterized by X-ray diffraction (XRD) and AC impedance spectroscopy (IS). The thermal expansion curves of samples were measured and the thermal expansion coefficients between 100 and 800 deg. C were calculated. Results showed that co-doping with appropriate ratio of Sm and Mg can improve the electrical performance of ceria-based electrolytes. As the substitution amount of Mg for Sm increased up to 50 mol%, the conductivity of the samples maintained almost unchanged or even slightly higher than that doped only with Sm in intermediate temperature. The results suggest that the materials cost for producing the ceria-based intermediate temperature solid oxide fuel cells (IT-SOFCs) may be significantly reduced owing to the cost difference between Mg and Sm.

36 MATERIALS SCIENCE↗

Development of mixed conducting dense nickel/Ca-doped lanthanum zirconate cermet for gas separation application

Highlights: Black-Right-Pointing-Pointer Phase pure La{sub 1.95}Ca{sub 0.05}Zr{sub 2}O{sub 7-{delta}} (LCZ) material is prepared by combustion synthesis. Black-Right-Pointing-Pointer LCZ and Ni-LCZ bulk samples are prepared with theoretical density close to 100%. Black-Right-Pointing-Pointer Bulk electrical conductivity {approx}400 S/cm is obtained for Ni-LCZ cermet at 750 Degree-Sign C. -- Abstract: La{sub 1.95}Ca{sub 0.05}Zr{sub 2}O{sub 7-{delta}} (LCZ) and Ni-LCZ cermet have been prepared by combustion synthesis and conventional solid state mixing methods respectively. Both the materials are sintered in air and controlled atmosphere (5% H{sub 2} in Ar). The density obtained for the material sintered at 1400 Degree-Sign C in controlled atmosphere is found to be more than 99.5%. This sintering temperature (1400 Degree-Sign C) is considered to be much lower compared to the conventional sintering temperature. The corresponding total conductivity for such Ni-LCZ cermet materials is {approx}400 S/cm measured at 750 Degree-Sign C having 40 vol% of Ni and 60 vol% LCZ.

36 MATERIALS SCIENCE↗

Low-energy pion-nucleon scattering and the Δ resonance in lattice QCD

We report on our investigation of low-energy pion-nucleon scattering from lattice QCD with Wilson type fermions. Our focus is on the isospin I = 3/2 channel, which couples to the Delta resonance. We discuss our calculations aiming at the extraction of the Delta resonance mass, width and effective coupling at pion mass 250 MeV, using the Lüscher finite-volume method to extract the phase shift δ J=3/2,l=1 .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Numerical computation of multishocked, three-dimensional supersonic flow fields with real gas effects.

A computational procedure is presented which is capable of determining the supersonic flow field surrounding three-dimensional wing-body configurations such as a delta-wing space shuttle. The governing equations in conservation-law form are solved by a finite difference method using a second-order noncentered algorithm between the body and the outermost shock wave, which is treated as a sharp discontinuity. Secondary shocks which form between these boundaries are captured automatically, and the intersection of these shocks with the bow shock posed no difficulty. Resulting flow fields about typical blunt nose shuttle-like configurations at angle of attack are presented. The differences between perfect and real gas effects for high Mach number flows are shown.

Kutler, P.↗

Variational description of the positive column with two-stem ionization

The ionization balance in diffusion dominated discharges which depends on both one and two step ionization processes is considered. The Spenke diffusion equation (D sq delta n + neutrino n + sq kn =0) describing such conditions is solved by the Rayleigh-Ritz variational method. Simple analytic approximations to the density profile, and the similarity relation between neutrino,k,D and the discharge dimensions, are derived for planar and cylindrical geometry, and compared with exact computations for certain limiting cases.

Crawford, F. W.↗

Dual methods and approximation concepts in structural synthesis

Approximation concepts and dual method algorithms are combined to create a method for minimum weight design of structural systems. Approximation concepts convert the basic mathematical programming statement of the structural synthesis problem into a sequence of explicit primal problems of separable form. These problems are solved by constructing explicit dual functions, which are maximized subject to nonnegativity constraints on the dual variables. It is shown that the joining together of approximation concepts and dual methods can be viewed as a generalized optimality criteria approach. The dual method is successfully extended to deal with pure discrete and mixed continuous-discrete design variable problems. The power of the method presented is illustrated with numerical results for example problems, including a metallic swept wing and a thin delta wing with fiber composite skins.

Fleury, C.↗