Search NASA⌕ Search

SEARCH · Search NASA

Results for “depth profiles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Performance and reliability improvement of HfSiON gate dielectrics using chlorine plasma treatment

The effects of chlorine plasma treatment on HfSiON gate dielectrics were investigated with respect to device performance and reliability characteristics. The chlorine plasma treatment was performed on atomic layer deposited HfSiON films to remove the residual carbon content. The optimal chlorine plasma treatment is shown to lower gate leakage current density without increasing equivalent oxide thickness of the gate stack. Secondary ion mass spectroscopy depth profiling showed that the carbon residue in HfSiON was reduced by the chlorine plasma treatment. It is demonstrated that an optimized chlorine plasma treatment improves the transistor I{sub on}-I{sub off} characteristics and reduces negative-bias temperature instability.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Producing metastable nanophase with sharp interface by means of focused ion beam irradiation

Amorphous carbon/nickel double layers were irradiated by 30 keV Ga{sup +} ions via focused ion beam. The effect of irradiation on the concentration distribution of all constituents was studied by Auger electron spectroscopy depth profiling and cross sectional transmission electron microscopy, while the morphology change of the sample was determined by atomic force microscopy. The Ga{sup +} ion irradiation results in the formation of metastable Ni{sub 3}C layer with a uniform thickness. The C/Ni{sub 3}C and Ni{sub 3}C/Ni interfaces were found to be sharp up to a fluence of 200 Ga{sup +} ions/nm{sup 2}.

36 MATERIALS SCIENCE↗

Evaluation of GaN substrates grown in supercritical basic ammonia

GaN crystals grown by the basic ammonothermal method were investigated for their use as substrates for device regrowth. X-ray diffraction analysis indicated that the substrates contained multiple grains while secondary ion mass spectroscopy (SIMS) revealed a high concentration of hydrogen, oxygen, and sodium. Despite these drawbacks, the emission from the light emitting diode structures grown by metal organic chemical vapor deposition on both the c-plane and m-plane epitaxial wafers was demonstrated. The SIMS depth profiles showed that the diffusion of the alkali metal from the substrate into the epitaxial film was small, especially in the m-direction.

36 MATERIALS SCIENCE↗

Precision Measurements of the 278 keV {sup 14}N(p,{gamma}) and the 151 keV {sup 18}O(p,{alpha}) Resonance Parameters

In thin film technology, analytical methods for monitoring the deposition of oxide and nitride coatings and the effects of corrosive, laser and ion-beam treatments have attracted considerable attention. For depth-profiling the concentrations of light isotopes, resonant nuclear reaction analysis is an excellent non-destructive ion-beam analytical tool. We report here on precision measurements of the 278 keV {sup 14}N(p,{gamma}) and the 151 keV {sup 18}O(p,{alpha}) resonances using the high-resolution proton beam of the Goettingen IONAS accelerator. The deduced resonance energies E{sub R} and total widths {gamma}(in the laboratory system) are E{sub R} = 277.60(27) keV and {gamma} = 1115(33) eV for the {sup 14}N(p,{gamma}) resonance, and E{sub R} = 150.97(26) keV and {gamma} = 178(35) eV for the {sup 18}O(p,{alpha}) resonance. These values are significantly more precise than the ones quoted in the literature.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Gold-implanted shallow conducting layers in polymethylmethacrylate

PMMA (polymethylmethacrylate) was ion implanted with gold at very low energy and over a range of different doses using a filtered cathodic arc metal plasma system. A nanometer scale conducting layer was formed, fully buried below the polymer surface at low implantation dose, and evolving to include a gold surface layer as the dose was increased. Depth profiles of the implanted material were calculated using the Dynamic TRIM computer simulation program. The electrical conductivity of the gold-implanted PMMA was measured in situ as a function of dose. Samples formed at a number of different doses were subsequently characterized by Rutherford backscattering spectrometry, and test patterns were formed on the polymer by electron beam lithography. Lithographic patterns were imaged by atomic force microscopy and demonstrated that the contrast properties of the lithography were well maintained in the surface-modified PMMA.

36 MATERIALS SCIENCE↗

Quantitative characterization of solid state phases by secondary neutral mass spectrometry

The quantitative determination of chemical solid phases by secondary neutral mass spectrometry (SNMS) based on the quantitative character of this technique is described and demonstrated for several thin film structures. The intermetallic phases in a Ni-Zn coating on Fe are shown to be achieved directly from the concentration ratios determined by SNMS. When correlating the local elemental concentration tupels with the corresponding phase fractions by a matrix equation, the determination of chemical solid phase depth profiles becomes possible. This is exemplified by the detection of temperature induced chemical phases in Ni and Ti/Si films on SiC substrates.

36 MATERIALS SCIENCE↗

Accelerator-Based Laboratory Activities at USNA

The Naval Academy Tandem Accelerator Laboratory is dedicated to providing educational experiences for undergraduates. Students gain experience in accelerator operations, detector and data acquisition systems, nuclear structure and reaction mechanisms, and materials analysis techniques. Suggestions for managing the laboratory sessions are given. Examples introducing Coulomb excitation, resonance reactions, and depth profiling are described.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Influence of sputter rate and crystal orientation on the distribution of carbon in polycrystalline copper surfaces treated by plasma immersion ion implantation

The sputter rate influences the resulting thickness of the carbon containing layer within a surface that was treated by plasma immersion ion implantation. Choosing a polycrystalline substrate with rather large crystals and a material with an inherent high sputter rate, inhomogeneous distributions of carbon over the substrate area due to different thicknesses of the incorporated carbon can be detected. A correlation of three factors namely the carbon x-ray intensity in electron probe microanalysis, the thickness of the carbon layer, and the sputter rate in depth profiling measurements via secondary ion mass spectrometry can be shown. Essential for these factors is the crystal orientation that is visualized by mapping via electron backscatter diffraction. The differences in carbon content due to the orientation are most likely one of the reasons that the adhesion of diamond-like carbon films on copper does not improve with an interlayer of implanted carbon.

36 MATERIALS SCIENCE↗

The effect of oxygen during irradiation of silicon with low energy Cs{sup +} ions

The effect of oxygen flooding during ultralow energy SIMS depth profiling of silicon with Cs{sup +} primary ions is presented. New experimental data show the effective sputtering yield of silicon in the presence of oxygen, as well as the energy distribution of the secondary Si{sup -} ions. It is found that the component sputtering yield of Si is very sensitive to minute amounts of oxygen in the proximity of the sputtered surface. At these very low flooding pressures (in the 10{sup -9}-10{sup -8} mbar range), one cannot account for a full oxidation in the time frame of a typical measurement; it is concluded that in this particular case, which is technologically very relevant, small traces of oxygen will change the desorption characteristics of cesium as well as silicon. It shows that oxygen that is adsorbed to the silicon surface provides an attachment site for impinging cesium ions and thereby increases the retention capacity of cesium tremendously. Also, oxygen changes the secondary ion yield and can even promote the desorption of Si from the analysis surface.

36 MATERIALS SCIENCE↗

Diffusion of Mn in GaAs studied by quantitative time-of-flight secondary ion mass spectrometry

Diffusion coefficients and the activation energy for Mn diffusion in ion-implanted and layered epitaxial structures of Ga{sub 1-x}Mn{sub x}As/GaAs are reported from quantitative time-of-flight secondary ion mass spectrometry. Samples are annealed between the growth temperature (as low as 200 deg. C) and approximately 400 deg. C. This temperature range is reported to improve the Curie temperature, which is important for the spintronic applications of these materials. Quantitative diffusion information is obtained by calibrating the Mn concentration to ion-implanted standards and the depth scale to profilometry measurements. Depth profiles obtained for ion-implanted Mn in GaAs at a dose of 1.35x10{sup 15} atoms/cm{sup 2} show increased Mn concentration within the top 5 nm of the sample but otherwise reveal no significant differences in the implantation shape after annealing up to 350 deg. C. For a higher implantation dose of 8.10x10{sup 15} Mn atoms/cm{sup 2}, diffusion is initiated after annealing at 300 deg. C with more significant diffusion at higher temperatures. The analysis of annealed epitaxial films of even higher concentration (Ga{sub 0.89}Mn{sub 0.11}As) exhibits diffusion at all temperatures measured (200-400 deg. C) and an activation energy of 0.67+-0.09 eV is calculated by fitting the profiles to an error function.

36 MATERIALS SCIENCE↗

Compositional and Structural Study of Gd Implanted ZnO Films

We report a compositional and structural study of ZnO films implanted with 30 keV Gd ions. The depth profile of the implanted ions, measured by Rutherford backscattering spectrometry, matches predictions of DYNAMIC-TRIM calculations. However, after annealing at temperatures above 550 deg. C the Gd ions are observed to migrate towards the bulk, and at the same time atomic force microscope images of the film surfaces show significant roughening. Raman spectroscopy shows that the annealed films have a reduced number of crystalline defects. The overall results are useful for developing an implantation-annealing regime to produce well characterized samples to investigate magnetism in the ZnO:Gd system.

36 MATERIALS SCIENCE↗

Influence of annealing atmosphere on the magnetic properties of SiO{sub 2}/Fe/SiO{sub 2} sandwiched nanocomposite films

The magnetic properties of SiO{sub 2}/Fe/SiO{sub 2} nanocomposite films are studied by magnetic force microscopy and vibrating sample magnetometer. The films were fabricated by alternately depositing SiO{sub 2}, Fe, and SiO{sub 2} on Si substrates with magnetron sputtering followed by thermal annealing. It is found that the annealing atmosphere significantly influences the sample structure, composition, and magnetic properties. The samples annealed in forming gas show much better magnetic properties than those annealed in vacuum and in N{sub 2}. The saturation magnetization can reach 200 emu/g, fairly close to the value of bulk Fe, and the coercivity can reach 400 Oe, much higher than 10 Oe of the bulk Fe. X-ray photoelectron spectroscopic depth profile measurement was carried out to study the mechanism of the strong influence of annealing atmosphere. For the samples annealed in forming gas, Fe nanoparticles are mildly oxidized, forming thin shells of Fe{sub 2}O{sub 3} surrounding them, which is beneficial for maintaining the ferromagnetic behavior and enhancing the coercivity of nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Crater effects on H and D emission from laser induced low-pressure helium plasma

An experimental study has been performed on the effects of crater depth on the hydrogen and deuterium emission intensities measured from laser plasmas generated in low-pressure helium ambient gas from zircaloy-4 samples doped with different H and D impurity concentrations as well as a standard brass sample for comparison. The results show that aside from emission of the host atom, the emission intensities of other ablated atoms of significantly smaller masses as well as that of the He atom generally exhibit relatively rapid initial decline with increasing crater depth. This trend was found to have its origin in the decreasing laser power density arriving at the crater bottom and thereby weakened the shock wave generated in the crater. As the crater deepened, the declining trend of the intensity appeared to level off as a result of compensation of the decreasing laser power density by the enhanced plasma confinement at increasing crater depth. Meanwhile, the result also reveals the significant contribution of the He-assisted excitation process to the doped hydrogen and deuterium emission intensities, leading to similar crater-depth dependent variation patterns in contrast to that associated with the surface water, with growing dominance of this common feature at the later stage of the plasma expansion. Therefore, a carefully chosen set of gate delay and gate width which are properly adapted to the crater-depth dependent behavior of the emission intensity may produce the desired intrinsic emission data for quantitative depth profiling of H impurity trapped inside the zircaloy wall.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Surface effect on domain wall width in ferroelectrics

We study the effect of the depolarization field on a domain wall structure near the surface of a ferroelectric. Since in real situation bound and screening charges form an electric double layer, the breaking of this layer by the domain wall induces stray depolarization field, which in turn changes the domain wall structure. Power law decay of the stray field results in the power law of polarization saturation near the surface, as compared to exponential saturation in the bulk. Obtained results predict that the surface broadening of ferroelectric domain walls appeared near Curie temperature as well as describe domain wall depth profile in weak ferroelectrics. We qualitatively describe extra-broad domain walls near LiNbO3 and LiTaO3 surfaces observed experimentally at room temperature, which probably originate at high temperatures but did not fully relax their width with temperature decrease allowing for lattice pinning and defect centers. Thus results have broad implication for fundamental issues such as maximal information storage density in ferroelectric data storage, domain wall pinning mechanisms at surfaces and interfaces, and nucleation dynamics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mg segregation in Mg-rich Mg-Ni switchable mirror studied by Rutherford backscattering, elastic recoil detection analysis, and nuclear reaction analysis

Pd/Mg{sub 3.3}Ni films were prepared by dc sputtering deposition on three different substrates of glass, diamondlike carbon/Si, and Si. Hydrogenation and dehydrogenation cycles were performed on these samples simultaneously. The optical switching property due to the hydrogenation and dehydrogenation was monitored by the transmission of laser light via the glass substrate. The switching ability was totally lost after 120 cycles. We made comparative study of the composition change between the new (as-deposited) and old (after 120 switching cycles) samples by Rutherford backscattering (RBS), elastic recoil detection analysis (ERDA), and nuclear reaction analysis (NRA). From the RBS results we found out the segregation of a Mg layer between the Pd cap layer and the rest of the Mg-Ni layer. At the Pd/Mg interface in the old sample, thin MgO layer formed probably during the dehydrogenation process with O{sub 2}. ERDA showed that there is much hydrogen in the old sample. NRA displayed the depth profiles of hydrogen distribution in the old sample. It is revealed that much hydrogen is accumulated at the interface between the Pd cap layer and the segregated Mg layer. It can be concluded that the formations of oxide and hydride of the segregated Mg layer are the main reasons for the degradation of the Mg{sub 3.3}Ni switchable mirror.

36 MATERIALS SCIENCE↗

EXPERIMENTAL-BASED DISCUSSION FOR THE SEPARATION OF RESIDUAL STRESSES AND COLD WORK IN SHOT PEENED IN718 USING HIGH FREQUENCY EDDY CURRENT SPECTROSCOPY

Typical aero engine alloys, such as IN718, can be surface-treated by shot peening to induce near-surface compressive strains. To calculate the remaining operation time for those critical aero engine components, a quantitative nondestructive determination of near-surface strain gradients has to be developed. We have demonstrated in the past, that it is possible to obtain a characteristic depth profile (surface and sub-surface) of the electrical conductivity of shot peened specimen by using high-frequency eddy current techniques. The measured conductivity profile is resulting from residual stresses, cold work, surface roughness, and the microstructure of the material. The objective is to measure residual stresses (separately from other material properties) in such components after a defined life time. It can be assumed, that surface roughness and microstructure remain unchanged in IN718 materials over their lifetime, but cold work and residual stresses can change independently. Consequently, there is a need to clearly separate the information from both material properties of received eddy current conductivity signals in order to obtain specific information related to residual stresses. This paper presents results acquired from different experiments, conducted to separate both effects by using the eddy current technique on shot peened IN718 materials. We present different physical approaches and illustrate the experiments to solve them. In addition, we will demonstrate that there is a need to use additional techniques, for example ultrasonic time-of-flight measurements, to separate the effects of residual stresses from compound (mixed) signals obtained on cold work samples.

36 MATERIALS SCIENCE↗

Improved interfacial state density in Al{sub 2}O{sub 3}/GaAs interfaces using metal-organic chemical vapor deposition

In situ deposition of Al{sub 2}O{sub 3} on GaAs was performed by chemical-vapor-deposition (CVD) with trimethyaluminum and isopropanol as precursors. A gallium-rich region in the Al{sub 2}O{sub 3} thin film above the interface was spontaneously formed via the in situ CVD process. Ga-enrichment of the interface was observed using secondary ion mass spectrometry (SIMS) depth profile measurement. X-ray photoelectron spectroscopy (XPS) results show that the gallium-rich region consists of Al{sub 2}O{sub 3} and Ga{sub 2}O{sub 3}, but no As{sub 2}O{sub 3} was observed. The Ga{sub 2}O{sub 3}-Al{sub 2}O{sub 3} layer above the oxide/GaAs interface reduces the frequency dispersion as measured with capacitance-voltage (C-V) characteristics and lowers the interfacial state density as compared to atomic-layer-deposition *(ALD) deposited films which do not display this gallium enrichment above the interface.

36 MATERIALS SCIENCE↗

In situ growth of superconducting NdFeAs(O,F) thin films by molecular beam epitaxy

Superconducting NdFeAs(O,F) thin films were grown on GaAs substrates by molecular beam epitaxy. Films grown with a sufficiently long growth time exhibited a clear superconducting transition with an onset temperature up to 48 K and zero resistance temperature up to 42 K without the need of an ex situ annealing process. Electron probe microanalysis and Hall coefficient measurements indicated that the superconducting films are doped with fluorine, and depth-profile analysis by Auger electron spectroscopy revealed the formation of a NdOF layer near the surface, which is probably connected with the fluorine doping.

36 MATERIALS SCIENCE↗