Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrical double layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Design of Terahertz Bio-Absorber Using Plum Flower Curves

A double peaks bio-absorber, which includes two metal layers and one dielectric layer, is proposed. The surface metal layer of the bio-absorber is a square array that consists of a plum shape metal cell that can produce double resonance absorption. By studying the surface current and electric field z component, the double peak is shown to originate from the two distinct resonance modes of the plum flower curves induced by the incident electromagnetic wave. Due to the symmetrical structure, the proposed bio-absorber is not sensitive to the polarization direction of incident waves and can maintain high absorption rates in a wide, range of angles.

42 ENGINEERING↗

Activating Layered Double Hydroxide with Multivacancies by Memory Effect for Energy-Efficient Hydrogen Production at Neutral pH

Sustainable water-splitting hydrogen production has long been considered one of the most promising energy conversion technologies, but enormous challenges remain: for instance, water electrolysis suffers from high overpotential and over energy consumption under neutral pH conditions. Furthermore, taking advantage of the memory effect of layered double hydroxide (LDH), we report an energy-efficient neutral water electrolyzer material based on LDH with multiple vacancy defects. Benefiting from the improved electrical conductivity, larger electrochemical surface area (ECSA), and faster charge transfer, the NiFe LDH with O, Ni, and Fe vacancies exhibits a low overpotential of 87 mV at 10 mA/cm 2 for hydrogen evolution reaction (HER) in a pH 7 buffer electrolyte. Impressively, the as-fabricated vacancy-containing NiFe LDH (v-NiFe LDH) splits water with a current density of 10 mA/cm 2 at ~1.60 V in a two-electrode device, outperforming most other water-splitting catalysts in neutral media. Such an electrolyzer setup could be powered by a commercial 2.0 V solar cell, producing hydrogen at a current density as high as 100 mA/cm 2 .

25 ENERGY STORAGE↗

Multiphysics Co-Optimization Design and Analysis of Double-Side Cooled Silicon Carbide-Based Power Module: Preprint

With the rapid growth of Electric Vehicles (EVs) and Hybrid Electric Vehicles (HEVs), much more rigorous design targets have been set for automotive power electronics, including high power density, high reliability, and low cost. Novel power module and inverter technologies based on wide bandgap (WEG) semiconductors have been developed to meet these design targets, while providing optimal power semiconductor operating temperature and promising thermomechanical performance. Compared with conventional cooling techniques which are normally applied only on one side of power module, double-side cooling approach is now believed to be the solution to enable high power density and low thermal resistance of WEG semiconductor-based power electronics. In this work, we develop a three-phase power module that is double-sided cooled using dielectric fluid jet impingement. In each phase, four silicon carbide (SiC) power semiconductors are bonded to copper busbars without electrical insulation layers. A finite element analysis (FEA) model is created for thermal and thermomechanical analysis. Based on FEA modeling results, we select particular dimensions for a parametric study to optimize thermal and mechanical performance. Using a multi-objective genetic algorithm (MOGA)-based optimization method, we have minimized the maximum junction temperature and thermal stresses within the power module. The multiphysics co-optimization approach has enabled an efficient design process of power modules with greatly reduced computational cost, as compared to conventional processes that rely on exhaustive numerical simulations and iterations.

ADVANCED PROPULSION SYSTEMS↗

Formation and properties of the buried isolating silicon-dioxide layer in double-layer “porous silicon-on-insulator” structures

The oxidation of mesoporous silicon in a double-layer “macroporous silicon–mesoporous silicon” structure is studied. The morphology and dielectric properties of the buried insulating layer are investigated using electron microscopy, ellipsometry, and electrical measurements. Specific defects (so-called spikes) are revealed between the oxidized macropore walls in macroporous silicon and the oxidation crossing fronts in mesoporous silicon. It is found that, at an initial porosity of mesoporous silicon of 60%, three-stage thermal oxidation leads to the formation of buried silicon-dioxide layers with an electric-field breakdown strength of E{sub br} ~ 10{sup 4}–10{sup 5} V/cm. Multilayered “porous silicon-on-insulator” structures are shown to be promising for integrated chemical micro- and nanosensors.

36 MATERIALS SCIENCE↗

Performance Evaluation of Lower-Energy Energy Storage Alternatives for Full-Hybrid Vehicles; NREL (National Renewable Energy Laboratory)

Automakers have been mass producing hybrid electric vehicles (HEVs) for well over a decade, and the technology has proven to be very effective at reducing per-vehicle fuel use. However, the incremental cost of HEVs such as the Toyota Prius or Ford Fusion Hybrid remains several thousand dollars higher than the cost of comparable conventional vehicles, which has limited HEV market penetration. The b b b b battery energy storage device is typically the component with the greatest contribution toward this cost increment, so significant cost reductions/performance improvements to the energy storage system (ESS) can correspondingly improve the vehicle-level cost/benefit relationship. Such an improvement would in turn lead to larger HEV market penetration and greater aggregate fuel savings. The United States Advanced Battery Consortium (USABC) and the U.S. Department of Energy (DOE) Energy Storage Program managers asked the National Renewable Energy Laboratory (NREL) to collaborate with a USABC Workgroup and analyze the trade-offs between vehicle fuel economy and reducing the decade-old minimum energy requirement for power-assist HEVs. NREL’s analysis showed that significant fuel savings could still be delivered from an ESS with much lower energy storage than the previous targets, which prompted USABC to issue a new set of lower-energy ESS (LEESS) targets that could be satisfied by a variety of technologies. With support from DOE, NREL has developed an HEV test platform for in-vehicle performance and fuel economy validation testing of the hybrid system using such LEESS devices. This presentation describes development of the vehicle test platform, and laboratory as well as in-vehicle evaluation results with alternate energy storage configurations as compared to the production battery system. The alternate energy storage technologies considered include lithium-ion capacitors -- i.e., asymmetric electrochemical energy storage devices possessing one electrode with battery-type characteristics (lithiated graphite) and one with ultracapacitor-type characteristics (carbon) -- and electrochemical double-layer capacitors.

33 ADVANCED PROPULSION SYSTEMS↗

Ion Transport in Charged Membranes: Linking Electric-Field-Driven Mechanisms to Pore Size via Perturbation Analysis

Ion-exchange membranes are a critical component in electrochemical systems. Nevertheless, the understanding and modeling of ion transport within these porous structures have been limited by particular complexity reductions, either ignoring the dimensionality of their porous network architecture or imposing geometric assumptions (i.e., overlapping double layers). Before addressing this morphology-transport gap, a framework that relates the driving forces of transport to the geometry of a single pore is required. In this work, our modeling domain consists of a two-dimensional single pore with charged walls, connecting two identical electrolyte reservoirs. Using the Poisson-Nernst-Planck equations and regular perturbation theory, we decouple the electric fields and analyze the driving forces of ion transport, specifically electromigration and induced electroosmosis within the pore. These processes are described as analytical functions of the interaction aspect ratio, ?, defined as the ratio of the pore radius to the Debye length. Using this parameter, our study (i) describes the interplay between electromigrative and electroosmotic mechanisms that set ionic conductivity, (ii) identifies a dimensionless group of intrinsic electrolyte properties that indicates the predominant driving force, and (iii) provides a qualitative, confinement-dependent perspective on selectivity in ion-conducting membranes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Laboratory simulation of ionospheric double-layers

A mechanism for double-layer formation in partially- or fully-ionized plasmas is described, founded on beam-plasma interaction: RF growth along the beam excites a rectified, ponderomotive electric field, which in turn causes charge separation. Laboratory studies of the mechanism are described.

Crawford, F. W.↗

Analysis of carrier transport and carrier trapping in organic diodes with polyimide-6,13-Bis(triisopropylsilylethynyl)pentacene double-layer by charge modulation spectroscopy and optical second harmonic generation measurement

We studied the carrier transport and carrier trapping in indium tin oxide/polyimide (PI)/6,13-Bis(triisopropylsilylethynyl)pentacene (TIPS-pentacene)/Au diodes by using charge modulation spectroscopy (CMS) and time-resolved electric field induced optical second harmonic generation (TR-EFISHG) measurements. TR-EFISHG directly probes the spatial carrier behaviors in the diodes, and CMS is useful in explaining the carrier motion with respect to energy. The results clearly indicate that the injected carriers move across TIPS-pentacene thorough the molecular energy states of TIPS-pentacene and accumulate at the PI/TIPS-pentacene interface. However, some carriers are trapped in the PI layers. These findings take into account the capacitance-voltage and current-voltage characteristics of the diodes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Double injection, resonant-tunneling recombination, and current-voltage characteristics in double-graphene-layer structures

We evaluate the effect of the recombination associated with interlayer transitions in ungated and gated double-graphene-layer (GL) structures on the injection of electrons and holes. Using the proposed model, we derive analytical expressions for the spatial distributions of the electron and hole Fermi energies and the energy gap between the Dirac points in GLs as well as their dependences on the bias and gate voltages. The current-voltage characteristics are calculated as well. The model is based on hydrodynamic equations for the electron and hole transports in GLs under the self-consistent electric field. It is shown that in undoped double-GL structures with weak scattering of electrons and holes on disorder, the Fermi energies and the energy gap are virtually constant across the main portions of GLs, although their values strongly depend on the voltages and recombination parameters. In contrast, the electron and hole scattering on disorder lead to substantial nonuniformities. The resonant inter-GL tunneling enables N-shaped current-voltage characteristics provided that GLs are sufficiently short. The width of the current maxima is much larger than the broadening of the tunneling resonance. In the double-GL structures with relatively long GLs, the N-shaped characteristics transform into the Z-shaped characteristics. The obtained results are in line with the experimental observations [Britnell et al., Nat. Commun. 4, 1794–1799 (2013)] and might be useful for design and optimization of different devices based on double-GL structures, including field-effect transistors and terahertz lasers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A simple class of singular, two species Vlasov equilibria sustaining nonmonotonic potential distributions

We present new elementary, exact weak singular solutions of the steady state, two species, electrostatic, one dimensional Vlasov-Poisson equations. The distribution of the hot, finite mass, mobile ions is assumed to be log singular at the position of the electric potential's minimum. We show that the electron energy distributions on opposite sides of this minimum are not equal. This leads to a jump discontinuity of the electron distribution across its separatrix. A simple relation exists between the difference of these two electron distributions and that of the ions. The velocity Fourier transform of the electron singular distribution is smooth and appears as a simple Neumann series. Elementary, finite amplitude profiles of the electric potential result from Poisson equation, which are smoothly, but nonmonotonically and asymmetrically distributed in space. Two such profiles are given explicitly as appropriate for a nonmonotonic double layer and for a plasma bounded by a surface. The distributions of both electrons and ions supporting such potential meet smooth and kinetically stable boundary conditions at one plasma boundary. For sufficiently small potential to electron temperature ratios, the nonthermal, discontinuous electron distribution resulting at the other plasma boundary is also stable against Landau damped perturbations of the electron distribution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The electrical and structural properties of In{sub y}Ga{sub 1-y}As/In{sub x}Al{sub 1-x}As/InP quantum wells with different InAs content

In{sub x}Al{sub 1-x}As/In{sub y}Ga{sub 1-y}As/In{sub x}Al{sub 1-x}As/InP HEMT structures has been investigated with a change in the InAs molar fraction both in the quantum well and the buffer layer. The electrical parameters of the samples are measured at different temperatures. The structural parameters of the layers and the characteristics of the interfaces between them are determined by double-crystal X-ray diffraction. An increase in the Hall mobility and electron concentration, as well as in the structural quality of the samples, is observed alongside an increase in the InAs molar fraction in the quantum well. It is established that high electron mobility is retained at small (to 5%) mismatches between the buffer layer and substrate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low frequency solitons and double layers in a magnetized plasma with two temperature electrons

Finite amplitude non-linear ion-acoustic solitary waves and double layers are studied in a magnetized plasma with cold ions fluid and two distinct groups of Boltzmann electrons, using the Sagdeev pseudo-potential technique. The conditions under which the solitary waves and double layers can exist are found both analytically and numerically. We have shown the existence of negative potential solitary waves and double layers for subsonic Mach numbers, whereas in the unmagnetized plasma they can only in the supersonic Mach number regime. For the plasma parameters in the auroral region, the electric field amplitude of the solitary structures comes out to be 49 mV/m which is in agreement of the Viking observations in this region.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The production of ion conics by oblique double layers

Magnetized test ions are subjected to acceleration through a numerically simulated oblique double layer in order to determine whether they emerge with velocity vectors aligned with or oblique to the ambient magnetic field. A criterion for oblique alignment, depending on the double-layer parameters and on the external magnetization, is obtained. When it is applied to observed and theoretical auroral double layers, this criterion predicts that accelerated heavy ions will be substantially less magnetic field aligned than will accelerated hydrogen ions, thus suggesting auroral double layers as a source of high-energy ion conics. Test particle simulations are also used to investigate the perpendicular heating of ions at low altitudes by the electric fields associated with moving auroral arcs. The rapid motion of small-scale structures in the arcs is suggested as a source of low-energy conical ion distributions, and the slow drifts of the entire arc forms are inferred to heat ionospheric ions.

Borovsky, J. E.↗

Wave-particle interactions on the FAST satellite

NASA's Fast Auroral Snapshot, or 'FAST' satellite, scheduled for launch in 1993, will investigate the plasma physics of the low altitude auroral zone from a 3500-km apogee polar orbit. FAST will give attention to wave, double-layer, and soliton production processes due to electrons and ions, as well as to wave-wave interactions, and the acceleration of electrons and ions by waves and electric fields. FAST will employ an intelligent data-handling system capacle of data acquisition at rates of up to 1 Mb/sec, in addition to a 1-Gbit solid-state memory. The data need be gathered for only a few minutes during passes through the auroral zone, since the most interesting auroral phenomena occur in such narrow regions as auroral arcs, electrostatic shocks, and superthermal electron bursts.

Temerin, M. A.↗

Solar cell comprising an oxide-nanoparticle buffer layer and method of fabrication

A buffer layer for protecting an organic layer during high-energy deposition of an electrically conductive layer is disclosed. Buffer layers in accordance with the present invention are particularly well suited for use in perovskite-based single-junction solar cells and double-junction solar cell structures that include at least one perovskite-based absorbing layer. In some embodiments, the buffer layer comprises a layer of oxide-based nanoparticles that is formed using solution-state processing, in which a solution comprising the nanoparticles and a volatile solvent is spin coated onto a structure that includes the organic layer. The solvent is subsequently removed in a low-temperature process that does not degrade the organic layer.

Bush, Kevin Alexander↗

Smectic C Self‐Assembly in Mesogen‐Free Liquid Crystalline Chiral Polyethers with Sulfonylated Methyl‐Branched Side Chains

Abstract To realize advanced electrical applications for ferroelectric liquid crystalline polymers, high spontaneous polarization ( P s ) is highly desired. However, current ferroelectric liquid crystalline polymers usually exhibit a low P s . In this work, mesogen‐free, chiral polyethers containing sulfonylated methyl‐branched alkyl side chains with a (CH 2 ) 3 O spacer between the sulfonyl and the branched alkyl groups are designed and synthesized. In contrast to the linear n ‐alkyl side chains, the methyl‐branched alkyl side chains induce chain tilting in the smectic layers. When double chirality exists in both the main chain and the side chains, a crystalline structure is observed after mechanical stretching. Intriguingly, when single chirality exists in either the backbone or the side chains, a liquid crystalline smectic C phase is obtained. The electric displacement–electric field study, however, does not show typical ferroelectric switching, although the dielectric constants are relatively high for these liquid crystalline polymers. This is likely because the dipole–dipole interactions among neighboring sulfonyl groups along the main chain are so strong that the ferroelectric switching is hindered in the samples. For the future work, it is desired to weaken the dipole–dipole interaction to achieve ferroelectricity in these mesogen‐free liquid crystalline polymers.

36 MATERIALS SCIENCE↗

One-dimensional models of quasi-neutral parallel electric fields

Parallel electric fields can exist in the magnetic mirror geometry of auroral field lines if they conform to the quasineutral equilibrium solutions. Results on quasi-neutral equilibria and on double layer discontinuities were reviewed and the effects on such equilibria due to non-unique solutions, potential barriers and field aligned current flows using as inputs monoenergetic isotropic distribution functions were examined.

Stern, D. P.↗

In-situ crystallization of GeTe\GaSb phase change memory stacked films

Single and double layer phase change memory structures based on GeTe and GaSb thin films were deposited by pulsed laser deposition (PLD). Their crystallization behavior was studied using in-situ synchrotron techniques. Electrical resistance vs. temperature investigations, using the four points probe method, showed transition temperatures of 138 °C and 198 °C for GeTe and GaSb single films, respectively. It was found that after GeTe crystallization in the stacked films, Ga atoms from the GaSb layer diffused in the vacancies of the GeTe crystalline structure. Therefore, the crystallization temperature of the Sb-rich GaSb layer is decreased by more than 30 °C. Furthermore, at 210 °C, the antimony excess from GaSb films crystallizes as a secondary phase. At higher annealing temperatures, the crystalline Sb phase increased on the expense of GaSb crystalline phase which was reduced. Extended X-ray absorption fine structure (EXAFS) measurements at the Ga and Ge K-edges revealed changes in their local atomic environments as a function of the annealing temperature. Simulations unveil a tetrahedral configuration in the amorphous state and octahedral configuration in the crystalline state for Ge atoms, while Ga is four-fold coordinated in both as-deposited and annealed samples.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗