Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrostatic analyzer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Atmospheric storm explanation of saturnian electrostatic discharges

Saturn electrostatic discharges (SED) monitored by the Voyager 1 were investigated to determine the source of the phenomena. Consideration has been given to two sources: the atmosphere at equatorial latitudes, where the cloud-top wind velocities correspond to the Saturn 10 hr 10 min rotation period; and the rings at 1.8 Saturn radius. The data were analyzed in terms of time and frequency, revealing a time-varying frequency, few detectable discharges outside of a low threshold, and the appearances and disappearances of the SED with no correlation with frequency. The periodicity of the SED episodes indicated that the source was occulted between revolutions, which ruled out the ring source. The SED signals were only detected on the dayside, suggesting the signals propagated through the dayside ionosphere. Diurnal variations in the ion densities could prohibit the signals from escaping on the nightside, a factor supported by detection of low frequency SED only during close passage of the Voyager. Ray tracing experiments have demonstrated that storm sources have emissions observable with the storm on the limb at the observed 30-40 MHz interval.

Kaiser, M. L.↗

SO2-Binding Properties of Cationic η6,η1-NCN-Pincer Arene Ruthenium Platinum Complexes: Spectroscopic and Theoretical Studies

The SO2-binding properties of a series of η6,η1-NCN-pincer ruthenium platinum complexes have been studied by both UV-visible spectroscopy, and theoretical calculations. When an electronwithdrawing [Ru(C5R5)]+ fragment (R = H or Me) is η6-coordinated to the phenyl ring of the NCNpincer platinum fragment (cf. [2]+ and [3]+, see scheme 1), the characteristic orange coloration (pointing to η1- SO2 binding to Pt) of a solution of the parent NCN-pincer platinum complex 1 in dichloromethane upon SO2-bubbling is not observed. However, when the ruthenium center is η6- coordinated to a phenyl substituent linked in para-position to the carbon-to-platinum bond, i.e. complex [4]+, the SO2-binding property of the NCN-platinum center seems to be retained, as bubbling SO2 into a solution of the latter complex produces the characteristic orange color. We performed theoretical calculations at the MP2 level of approximation and TD-DFT studies, which enabled us to interpret the absence of color change in the case of [2]+ as an absence of coordination of SO2 to platinum. We analyze this absence or weaker SO2-coordination in dichloromethane to be a consequence of the relative electron-poorness of the platinum center in the respective η6- ruthenium coordinated NCN-pincer platinum complexes, that leads to a lower binding energy and an elongated calculated Pt-S bond distance. We also discuss the effects of electrostatic interactions in these cationic systems, which also seems to play a destabilizing role for complex [2(SO2)]+.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanistic insight into the effects of A-site doping in perovskite nanorods on interfacial Li-ion and Na-ion transport in polymer–perovskite composite electrolytes

Composite polymer electrolytes (CPEs) offer a promising pathway to safer and higher energy density electrochemical energy storage yet optimizing interfacial ion transport remains a critical challenge due to high resistances and a lack of understanding of the complex interfacial electrostatic interactions. This work investigates the mechanistic origins of the interfacial ion transport enhancement in single-ion conducting (SIC) polymer electrolytes filled with A-site disordered perovskite LaxMyTiOz (LMTO) (M = Li, Na, K) nanorods. By integrating Density Functional Theory (DFT) with broadband dielectric spectroscopy (BDS) and pulsed-field-gradient NMR (PFG-NMR), we analyze the ion transport behavior in Li-based and Na-based SIC systems containing compositionally distinct LMTO fillers (LMTO800 and LMTO900). Specifically, we introduce the site-to-site energy difference (ΔE) descriptor, which extends beyond single-site descriptors such as adsorption energy and ion binding energies. We demonstrate that ΔE together with ion binding energies provide a more comprehensive picture of the energy landscape at the polymer–ceramic interface. The combined DFT and experimental results show that A-site doping in the ceramic filler can effectively modulate ΔE and ion binding energies, creating a favorable potential energy landscape that promotes enhanced ion transport along the interface. This comprehensive study illustrates the impact of ceramic compositional tuning on interfacial ion transport and provides materials design rules towards real-world applications.

B shepard, Lauren [Pennsylvania State University]↗

Solitary structures in a spatially nonuniform degenerate plasma in the presence of quantizing magnetic field

In the present investigation, linear and nonlinear propagation of low frequency (ω≪Ω{sub ci}) electrostatic waves have been studied in a spatially inhomogeneous degenerate plasma with one dimensional electron trapping in the presence of a quantizing magnetic field and finite temperature effects. Using the drift approximation, formation of 1 and 2D drift ion solitary structures have been studied both for fully and partially degenerate plasmas. The theoretical results obtained have been analyzed numerically for the parameters typically found in white dwarfs for illustrative purpose. It is observed that the inclusion of Landau quantization significantly changes the expression of the electron number density of a dense degenerate plasma which affects the linear and nonlinear propagation of drift acoustic solitary waves in such a system. The present work may be beneficial to understand the propagation of drift solitary structures with weak transverse perturbation in a variety of physical situations, such as white dwarfs and laser-induced plasmas, where the quantum effects are expected to dominate.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasmon modes of metallic nanowires including quantum nonlocal effects

The properties of electrostatic surface and bulk plasmon modes of cylindrical metallic nanowires are investigated, using the quantum hydrodynamic theory of plasmon excitation which allows an analytical study of quantum tunneling effects through the Bohm potential term. New dispersion relations are obtained for each type of mode and their differences with previous treatments based on the standard hydrodynamic model are analyzed in detail. Numerical results show by considering the quantum effects, as the value of wave number increases, the surface modes are slightly red-shifted first and then blue-shifted while the bulk modes are blue-shifted.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DNA–DNA Interactions in Tight Supercoils Are Described by a Small Effective Charge Density

DNA-DNA interactions are important for genome compaction and transcription regulation. In studies of such complex processes, DNA is often modeled as a homogeneously charged cylinder and its electrostatic interactions are calculated within the framework of the Poisson-Boltzmann equation. Commonly, a charge adaptation factor is used to address limitations of this theoretical approach. Despite considerable theoretical and experimental efforts, a rigorous quantitative assessment of this parameter is lacking. Here, we comprehensively characterized DNA-DNA interactions in the presence of monovalent ions by analyzing the supercoiling behavior of single DNA molecules held under constant tension. Both a theoretical model and coarse-grained simulations of this process revealed a surprisingly small effective DNA charge of 40% of the nominal charge density, which was additionally supported by all-atom molecular dynamics simulations.

Physics↗

Method for calculating and observing microwave absorption by a sphere in a single mode rectangular cavity

A new theory of microwave absorption by a lossy dielectric sphere in a single mode rectangular cavity has been recently developed. The absorption was treated in the framework of an electromagnetic scattering problem. That theory is summarized here and calculated results that bear on optimizing the processing of materials are illustrated. Methods for observing power absorption and other results predicted by the scattering model are discussed. Cavity perturbation theory provides a bridge between theoretical calculations and experimental observations, and a special problem that arises when an established version of cavity perturbation theory is applied to spheres is identified, analyzed, and resolved. The direct problem of predicting shifts in frequency and Q from model calculations is discussed for a sphere in a cavity when the sphere's complex dielectric constant is known. Also, the inverse problem of determining the complex dielectric constants from measured values of those shifts is considered. The small sphere limit, where an electrostatic or quasistatic model is valid, is treated in detail, and planned work on parallel problems for larger spheres is described.

Jackson, H. W.↗

Magnetic field extraction of trap-based electron beams using a high-permeability grid

A method to form high quality electrostatically guided lepton beams is explored. Test electron beams are extracted from tailored plasmas confined in a Penning-Malmberg trap. The particles are then extracted from the confining axial magnetic field by passing them through a high magnetic permeability grid with radial tines (a so-called “magnetic spider”). An Einzel lens is used to focus and analyze the beam properties. Numerical simulations are used to model non-adiabatic effects due to the spider, and the predictions are compared with the experimental results. Improvements in beam quality are discussed relative to the use of a hole in a high permeability shield (i.e., in lieu of the spider), and areas for further improvement are described.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of surface ionic screening on the polarization reversal scenario in ferroelectric thin films: Crossover from ferroionic to antiferroionic states

Nonlinear electrostatic interaction between the surface ions of electrochemical nature and ferroelectric dipoles gives rise to the coupled ferroionic states in nanoscale ferroelectrics. Here, we investigated the role of the surface ions formation energy value on the polarization states and polarization reversal mechanisms, domain structure and corresponding phase diagrams of ferroelectric thin films. Using 3D finite elements modeling we analyze the distribution and hysteresis loops of ferroelectric polarization and ionic charge, and dynamics of the domain states. These calculations performed over large parameter space delineate the regions of single- and poly- domain ferroelectric, ferroionic, antiferroionic and non-ferroelectric states as a function of surface ions formation energy, film thickness, applied voltage and temperature. We further map the analytical theory for 1D system onto effective Landau-Ginzburg free energy and establish the correspondence between the 3D numerical and 1D analytical results. In conclusion, this approach allows performing the overview of the ferroionic system phase diagrams and exploring the specifics of switching and domain evolution phenomena.

36 MATERIALS SCIENCE↗

Ion-Flow-Induced Excitation of Electrostatic Cyclotron Mode in Magnetized Dusty Plasma

The stability of electrostatic cyclotron mode is investigated in a flowing magnetized dusty plasma in the presence of strong ion–neutral collisions. In the high magnetic field limit, when the dust magnetization becomes important, it is expected that the collective behavior of magnetized dust grains suspended in the near-sheath region substantially influences the dispersion properties of electrostatic modes. The growth/damping of the collective excitation is significantly controlled by such parameters as the ion–neutral collision frequency, Mach number, and magnetic field strength. In our case, the explicit dependence of the Mach number on the magnetic field and collision frequency has been taken into account and possible implications on the stability of the mode is analyzed. Streaming instability of cyclotron modes may be important to understand issues related to the interaction mechanism between dust grains and other associated phenomena like Coulomb crystallization, phase behavior, transport properties, etc., in the relatively strong magnetic field limit, which is currently accessible in the DPD (Kiel University) and MDPX (PSL, Auburn University) experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Three-dimensional plasma measurements within the earth's magnetosphere

Magnetospheric measurements of three-dimensional velocity distributions for positive ions and electrons in the energy range from 1 eV to 45 keV are reported which were obtained with quadrispherical Lepedeas on ISEE 1 and 2. The instrumentation is briefly described, and an extension of energy-time spectrograms to three-dimensional summaries via the use of ancillary energy-spin phase spectrograms for multiple analyzers is outlined. Macroscopic plasma parameters for two crossings of the dayside magnetopause are presented, along with a preliminary evaluation of the kinematical motions of low-energy charged particles within the terrestrial ring current. Nonmonotonic electron velocity distributions presumably related to the generation of electron cyclotron harmonic instabilities are examined. The possible signature of diffusion driven by electrostatic waves is considered, and velocity distributions of positive ions in the dawn magnetotail are investigated.

Frank, L. A.↗

Graphene-polyelectrolyte multilayer membranes with tunable structure and internal charge

One great advantage of graphene-polyelectrolyte multilayer (GPM) membranes is their tunable structure and internal charge for improved separation performance. In this study, we synthesized GO-dominant GPM membrane with internal negatively-charged domains, polyethyleneimine (PEI)-dominant GPM membrane with internal positively-charged domains and charge-balanced dense/loose GPM membranes by simply adjusting the ionic strength and pH of the GO and PEI solutions used in layer-by-layer membrane synthesis. A combined system of quartz crystal microbalance with dissipation (QCM-D) and ellipsometry was used to analyze the mass deposition, film thickness, and layer density of the GPM membranes. The performance of the GPM membranes were compared in terms of both permeability and selectivity to determine the optimal membrane structure and synthesis strategy. One effective strategy to improve the GPM membrane permeability-selectivity tradeoff is to assemble charge-balanced dense membranes under weak electrostatic interactions. This balanced membrane exhibits the highest MgCl 2 selectivity (~86%). Another effective strategy for improved cation removal is to create PEI-dominant membranes that provide internal positively-charged barrier to enhance cation selectivity without sacrificing water permeability. Finally, these findings shine lights on the development of a systematic approach to push the boundary of permeability-selectivity tradeoff for GPM membranes.

42 ENGINEERING↗

Induced polarization restricts the conformational distribution of a light-harvesting molecular triad in the ground state

The light-harvesting molecular triad consisting of carotenoid polyene (C), diaryl-porphyrin (P) and pyrrole-fullerene (C60) is a donor–acceptor molecule capable of absorbing incident light in the visible range. Its ability to convert solar energy to electrical excitation and charge separation energy suggests a great potential in real-world applications. The ensemble of its conformations under ambient conditions varies widely according to its electronic state. In previous work, we applied a non-polarizable model to study the conformational distribution of the molecular triad in the ground and charge separated states. However, due to the lack of polarization, which imparts subtle changes in the charge distribution on atoms, molecular simulations fail to produce accurate average dipole moments. We developed the first polarizable model for a molecular triad to investigate the structural and dynamic properties of a molecular triad in the ground state in an explicit organic solvent, tetrahydrofuran (THF). We performed first-principles electronic structure calculations of the individual components in the triad as well as THF and then fit the partial atomic charges to the electrostatic potential using the i-RESP methodology. We validated these force field parameters by comparing the thermodynamic and dynamic properties obtained from molecular dynamics simulations with those from experiments. We enhanced the sampling of the triad conformations with replica exchange molecular dynamics simulations. We characterized the effects of induced polarization on the structural stability of the triad by analyzing the free energy landscapes constructed with polarizable force fields. Furthermore, by using principal component analysis, we found that the molecular triad conformations adopted a small range of torsional angles with induced polarization. The triad conformation solvated in polar solvent with a polarizable force field qualitatively agrees with that obtained from nuclear magnetic resonance spectroscopy.

Starovoytov, Oleg N.↗

Linear coupling of Alfven waves and acoustic-type modes in dense quantum magnetoplasmas

A coupled dispersion relation of low frequency shear Alfven waves and electrostatic waves in a dense quantum magnetoplasma is derived by using hydrodynamic model. The dispersive contribution of electron quantum effects is discussed for dynamic as well as static ions. The dominant role of electron Fermi pressure is highlighted and its comparison with the quantum pressure arising due to quantum Bohm potential is presented. For illustrative purpose, the results are analyzed numerically. The relevance of present work with the dense astrophysical and laboratory plasmas is pointed out with possible consequences.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Evaluation of electrostatic charge effects on the data processing system and the orbiter communication and tracking receivers

An analysis of radiated interference test results obtained from frictionally charged Orbiter TPS tile was presented. The tests included the measurement of noise pick-up by Orbiter S-band, L-band, C-band, and Ku-band antennas located beneath the tiles in a manner simulating their installation on Orbiter. In addition, the radiated field characteristics resulting from the static discharge was determined. The results are analyzed as to their effect on data bus equipment and on Orbiter Communications and Tracking (C&T) receivers. It was concluded that the radiated interference should have no effect on MDM's. However the CPU, IOP and PMU enclosures require some minor modification to assure immunity from P-static interference. Orbiter antenna tests indicate that the S-band receiver should not be affected by P-static noise. The TACAN and Radar Altimeter performance appears to be adequate but with a small margin. MSBLS performance is uncertain because laboratory instrumentation cannot approach the MSBLS sensitivity.

Lawton, R. M.↗

Physical processes in the plasma mantle of Venus

The results are presented of a study, which analyzed data from 10 Pioneer Venus orbits in order to see whether similar wave particle interaction processes also exist in the corresponding region around Venus. The first conclusion is that the apparent physical processes in the mantle are indeed similar around Venus and Mars. The planetary thermal O(+) ions outside the ionopause interact with the shocked solar wind and excite electrostatic waves close to the lower hybrid frequency. These waves propagate inwards, heating first the electron and deeper down in the ionosphere the thermal ion population. The observed superthermal ions are believed to be the product of this wave particle interaction process. It is also concluded that the wave energy transferred to the thermal electrons is of the right magnitude (about 4 x 10 exp 9 eV/sq cm s) to provide the supplemental heat source necessary to reconcile observed and calculated electron temperatures in the ionosphere.

Szego, K.↗

Genesis Solar Wind – Capture, Return, Curate and Analyze: Looking Backward Reviewing Sample Collection Hardware

Genesis, as the first U.S. spacecraft to return astromaterial samples since Apollo, not only integrated the mission planning and flight teams, but also the science and sample curation teams during the mission development period. Since Genesis is a sample return mission, the Science Team was essential in certifying the collectors (sample containers for solar atoms). Burnett and the science team defined the purity of collector materials and ability to analyze solar wind composition to the precision required for planetary science. The science team’s choices included a variety of very pure materials which are described, including rationale for selection. The JPL Project Scientist networked with specialty vendors refining specifications and fabricating several of the materials. JPL engineering team designed and fabricated the collector arrays. LANL designed and built an electrostatic concentrator. JSC procured these materials with exacting specifications.

SOLAR WIND↗