SEARCH · Search NASA

Results for “flexibility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

All sources NASA NTRS DOE OSTI

NASA NTRS1989

RCTS: A flexible environment for sensor integration and control of robot systems; the distributed processing approach

Most robot systems lack a suitable hardware and software environment for the efficient research of new control and sensing schemes. Typically, engineers and researchers need to be experts in control, sensing, programming, communication and robotics in order to implement, integrate and test new ideas in a robot system. In order to reduce this time, the Robot Controller Test Station (RCTS) has been developed. It uses a modular hardware and software architecture allowing easy physical and functional reconfiguration of a robot. This is accomplished by emphasizing four major design goals: flexibility, portability, ease of use, and ease of modification. An enhanced distributed processing version of RCTS is described. It features an expanded and more flexible communication system design. Distributed processing results in the availability of more local computing power and retains the low cost of microprocessors. A large number of possible communication, control and sensing schemes can therefore be easily introduced and tested, using the same basic software structure.

Allard, R.↗

NASA NTRS1989

A variational approach to dynamics of flexible multibody systems

This paper presents a variational formulation of constrained dynamics of flexible multibody systems, using a vector-variational calculus approach. Body reference frames are used to define global position and orientation of individual bodies in the system, located and oriented by position of its origin and Euler parameters, respectively. Small strain linear elastic deformation of individual components, relative to their body references frames, is defined by linear combinations of deformation modes that are induced by constraint reaction forces and normal modes of vibration. A library of kinematic couplings between flexible and/or rigid bodies is defined and analyzed. Variational equations of motion for multibody systems are obtained and reduced to mixed differential-algebraic equations of motion. A space structure that must deform during deployment is analyzed, to illustrate use of the methods developed.

Wu, Shih-Chin↗

NASA NTRS1990

Reduced order component models for flexible multibody dynamics simulations

Many flexible multibody dynamics simulation codes require some form of component description that properly characterizes the dynamic behavior of the system. A model reduction procedure for producing low order component models for flexible multibody simulation is described. Referred to as projection and assembly, the method is a Rayleigh-Ritz approach that uses partitions of the system modal matrix as component Ritz transformation matrices. It is shown that the projection and assembly method yields a reduced system model that preserves a specified set of the full order system modes. Unlike classical component mode synthesis methods, the exactness of the method described is obtained at the expense of having to compute the full order system modes. The paper provides a comprehensive description of the method, a proof of exactness, and numerical results demonstrating the method's effectiveness.

Tsuha, Walter S.↗

NASA NTRS1989

Optimal orbit transfer suitable for large flexible structures

The problem of continuous low-thrust planar orbit transfer of large flexible structures is formulated as an optimal control problem with terminal state constraints. The dynamics of the spacecraft motion are treated as a point-mass central force field problem; the thrust-acceleration magnitude is treated as an additional state variable; and the rate of change of thrust-acceleration is treated as a control variable. To ensure smooth transfer, essential for flexible structures, an additional quadratic term is appended to the time cost functional. This term penalizes any abrupt change in acceleration. Numerical results are presented for the special case of a planar transfer.

Chatterjee, Alok K.↗

NASA NTRS1989

Flexible backbone aromatic polyimide adhesives

Continuing research at Langley Research Center on the synthesis and development of new inexpensive flexible aromatic polyimides as adhesives has resulted in a material identified as LARC-F-SO2 with similarities to polyimidesulfone, PISO2, and other flexible backbone polyimides recently reported by Progar and St. Clair. Also prepared and evaluated was an endcapped version of PISO2. These two polymers were compared with LARC-TPI and LARC-STPI, polyimides research in our laboratory and reported in the literature. The adhesive evaluation, primarily based on lap shear strength (LSS) tests at RT, 177 C and 204 C, involved preparing adhesive tapes, conducting bonding studies and exposing lap shear specimens to 204 C air for up to 1000 hrs and to a 72-hour water boil. The type of adhesive failure as well as the Tg was determined for the fractured specimens. The results indicate that LARC-TPI provides the highest LSSs. LARC-F-SO2, LARC-TPI and LARC-STPI all retain their strengths after thermal exposure for 1000 hrs and PISO2 retains greater than 80 percent of its control strengths. After a 72-hr water boil exposure, most of the four adhesive systems showed reduced strengths for all test temperatures although still retaining a high percentage of their original strength (greater than 60 percent) except for one case. The predominant failure type was cohesive with no significant change in the Tgs.

Progar, Donald J.↗

NASA NTRS1990

Experiments in identification and control of flexible-link manipulators

A report is presented on an ongoing effort for end-point position control of flexible-link manipulators under realistic conditions in laboratory setups consisting of one- and two-link manipulators. The authors treat modeling, identification, and control of flexible-link manipulators that are required to carry payloads, possibly unknown and varying, while undergoing disturbance effects from the environments and the workspace. The various identification and control techniques being investigated are summarized, with emphasis on the ability of the controller to adjust to changes in dynamics, payload, and working environment. It is found that time-domain methods offer identified model structures that are readily available for control design, whereas frequency-domain methods, particularly the time-varying transfer function estimation approach developed for this application, are more desirable when rapid controller tuning is required.

Yurkovich, Stephen↗

NASA NTRS1990

Navier-Stokes computations on swept-tapered wings, including flexibility

A procedure to couple the Navier-Stokes solutions with modal structural equations of motion is presented for computing aeroelastic responses of flexible fighter wings. The Navier-Stokes flow equations are solved by a finite-difference scheme with dynamic grids. The coupled aeroelastic equations of motion are solved using the linear-acceleration method. The configuration-adaptive dynamic grids are time-accurately generated using the aeroelastically deformed shape of the wing. The coupled calculations are compared with experiments when available. Effects of flexibility and pitch rate are demonstrated for flows with vortices. Turbulent flow computations are also compared with laminar flow computations.

Guruswamy, Guru P.↗

NASA NTRS1990

Boundary flexibility method of component mode synthesis using static Ritz vectors

A method of dynamic substructuring is presented which provides for the incorporation of a set of static Ritz vectors, referred to as boundary flexibility vectors, as a replacement and/or supplement to conventional eigenvectors in component mode synthesis. The suggested boundary flexibility Ritz vectors are generated by an extension of Wilson's load-dependent Ritz vector algorithm for transient dynamic analysis. The extended algorithm is not load-dependent, is applicable to both fixed-and free-interface components, and results in a general component mode synthesis model appropriate for any type of dynamic analysis.

Abdallah, A. A.↗

NASA NTRS1989

Adaptive precompensators for flexible-link manipulator control

The application of input precompensators to flexible manipulators is considered. Frequency domain compensators color the input around the flexible mode locations, resulting in a bandstop or notch filter in cascade with the system. Time domain compensators apply a sequence of impulses at prespecified times related to the modal frequencies. The resulting control corresponds to a feedforward term that convolves in real-time the desired reference input with a sequence of impulses and produces a vibration-free output. An adaptive precompensator can be implemented by combining a frequency domain identification scheme which is used to estimate online the modal frequencies and subsequently update the bandstop interval or the spacing between the impulses. The combined adaptive input preshaping scheme provides the most rapid slew that results in a vibration-free output. Experimental results are presented to verify the results.

Tzes, Anthony P.↗

NASA NTRS1989

Limitations of vibration suppression in flexible space structures

The uncertainties inherent in the dynamics of flexible spacecraft make robustness questions very important when designing vibration suppression systems for these vehicles. This often leads to the use of sensors and actuators which are collocated on the structure, so as to avoid the potentially destabilizing problem of unknown modal phase differences between noncollocated sensors and actuators. The closed-loop performance attainable is, of course, reduced if only collocated pairs are considered. The object of the present study is to investigate whether the special properties of the transmission zeros of such structures can be used to quantify these performance limitations. The approach is based on recent results concerning the transmission zeros of flexible structures.

Williams, T. W. C.↗

NASA NTRS1989

Active vibration control for flexible rotor by optimal direct-output feedback control

Experimental research tests were performed to actively control the rotor vibrations of a flexible rotor mounted on flexible bearing supports. The active control method used in the tests is called optimal direct-output feedback control. This method uses four electrodynamic actuators to apply control forces directly to the bearing housings in order to achieve effective vibration control of the rotor. The force actuators are controlled by an analog controller that accepts rotor displacement as input. The controller is programmed with experimentally determined feedback coefficients; the output is a control signal to the force actuators. The tests showed that this active control method reduced the rotor resonance peaks due to unbalance from approximately 250 microns down to approximately 25 microns (essentially runout level). The tests were conducted over a speed range from 0 to 10,000 rpm; the rotor system had nine critical speeds within this speed range. The method was effective in significantly reducing the rotor vibration for all of the vibration modes and critical speeds.

Nonami, K.↗

NASA NTRS1990

Rapid in-plane maneuvering of the flexible orbiting SCOLE

The rapid two-dimensional slewing and vibrational control of the unsymmetrical flexible SCOLE (Spacecraft Control Laboratory Experiment) with multi-bounded controls has been considered. Pontryagin's Maximum Principle has been applied to the nonlinear equations of the system to derive the necessary conditions for the optimal control. The resulting two-point boundary-value problem is then solved by using the quasilinearization technique, and the near-minimum time is obtained by sequentially shortening the slewing time until the controls are near the bang-bang type. The trade-off between the minimum time and the minimum flexible amplitude requirements has been discussed. The numerical results show that the responses of the nonlinear system are significantly different from those of the linearized system for rapid slewing.

Bainum, Peter M.↗

NASA NTRS1990

Selection of component modes for the simulation of flexible multibody spacecraft

This paper describes a procedure for the selection of component modes employed in discretization of component deformation in a flexible multibody spacecraft. The emphasis is placed on the selection of modes which adequately represent the interaction of the various on-board control systems with the vehicle structural flexibility. The method combines the component mode synthesis approaches of Craig-Bampton (1968), MacNeal (1971) and Rubin (1975), and Benfield-Hruda (1971) with the modal balancing method of Moore (1981) and Gregory (1984). The procedure, which is applicable to both articulating and nonarticulating systems, was used to develop a low-order model of the three-body articulating Galileo spacecraft.

Spanos, John T.↗

NASA NTRS1990

Sensitivity of the transmission zeros of flexible space structures

The new pole/zero cancellation technique developed for the problem of sensitivity and robustness in vibration isolation systems for flexible spacecraft requires an analysis of the sensitivity of transmission zeros. This paper analyzes the sensitivity of the transmission zeros of flexible structures with compatible sensors and actuators, in terms of partial derivatives and condition numbers. It is shown that, in both measures, the sensitivities of the zeros of such a system are closely related to those of its poles. It is also shown that the closed-loop poles produced by applying the pole/zero cancellation to the structure have sensitivities approaching those of the zeros, so that these are given by the sensitivities of the open-loop poles. Examples are presented that illustrate these points.

Williams, Trevor↗

NASA NTRS1990

Launch flexibility using NLP guidance and remote wind sensing

This paper examines the use of lidar wind measurements in the implementation of a guidance strategy for a nonlinear programming (NLP) launch guidance algorithm. The NLP algorithm uses B-spline command function representation for flexibility in the design of the guidance steering commands. Using this algorithm, the guidance system solves a two-point boundary value problem at each guidance update. The specification of different boundary value problems at each guidance update provides flexibility that can be used in the design of the guidance strategy. The algorithm can use lidar wind measurements for on pad guidance retargeting and for load limiting guidance steering commands. Examples presented in the paper use simulated wind updates to correct wind induced final orbit errors and to adjust the guidance steering commands to limit the product of the dynamic pressure and angle-of-attack for launch vehicle load alleviation.

Cramer, Evin J.↗

NASA NTRS1990

Active control synthesis for flexible space structures excited by persistent disturbances

Both classical and state-space synthesis methods for active control of flexible space structures in the presence of persistent disturbances are presented. The methods exploit the so-called internal model principle for asymptotic disturbance rejection. A generic example of flexible space structures is used to illustrate the simplicity of the proposed design methodologies. The concept of a disturbance rejection filter dipole is introduced from a classical control viewpoint. It is shown that the proposed design methods will invariably make use of non-minimum-phase compensation for a class of noncolocated control problems. The need for tradeoffs between performance and parameter robustness is discussed.

Wie, Bong↗

NASA NTRS1990

Active rejection of persistent disturbances in flexible space structures

A dynamic compensator for active rejection of persistent disturbances in flexible space structures is designed on the principle of the H(infinity)-optimization of the sensitivity transfer function matrix. A general state space solution is formulated to the multiinput multioutput H(infinity)-optimal control problem, allowing the use of the H(infinity)-optimal synthesis algorithm for the state-space models of space structures that result from model order reduction. Disturbances encountered in flexible space structures, such as shuttle docking, are investigated using the high-mode and the reduced-order models of a cantilevered two-bay truss, demonstrating the applicability of the H(infinity)-optimal approach.

Hwang, Cheng-Neng↗

NASA NTRS1990

Optimization of actuator and sensor placement for on-orbit identification in large flexible spacecraft

There has been considerable research on choosing actuator and sensor locations in large flexible spacecraft in order to optimize the controllability and observability of the system, or to maximize some objective function of control system performance. Future large flexible spacecraft may require on-orbit identification of the structure to tune the control system, because such tests cannot be performed in a one-g environment before launch. This indicates that the choice of actuator and sensor locations must serve a dual purpose, for control and for identification. This paper develops concepts for a degree of identifiability and studies placement of actuators and sensors on a free-free beam to optimize such objective functions. The results in this simple situation suggest that in free-free spacecraft structures in orbit, placement for control and placement for identification may often be consistent objectives rather than conflicting objectives.

Bergmann, Martin↗