Search NASA⌕ Search

SEARCH · Search NASA

Results for “frequency range”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

MEASUREMENTS OF RAPID DENSITY FLUCTUATIONS IN THE SOLAR WIND

The power spectrum of density fluctuations in the solar wind is inferred by tracking small timescale changes in the electron plasma frequency during periods of strong Langmuir wave activity. STEREO electric field waveform data are used to produce time profiles of plasma density from which the density power spectrum is derived. The power spectra obtained by this method extend the observed frequency range by an order of magnitude while remaining consistent with previous results near a few Hertz. Density power spectral indices are found to be organized by the angle between the local magnetic field and the solar wind direction, indicating significant anisotropy in solar wind high-frequency density turbulence.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Efficient and versatile graphene-based multilayers for EM field absorption

We thoroughly investigate the possibility to absorb most (i.e., up to more than 90%) of the incident electro-magnetic radiations in thin multilayered PMMA/graphene structures, thus proposing the technical realization of a device with an operational frequency range in the millimeter-wave domain, i.e., 30 GHz–300 GHz. Our simulations demonstrate the concrete possibility to enhance the field absorption by means of a selective removal and proper micro-pattering within the graphene material, enabling a complete and efficient control of the graphene sheet conductance. This method is applied to design and engineer a class of devices, endowed with a wideband operation capability, showing almost no fluctuations throughout the whole range of mm-wave frequencies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dynamic dipole polarizabilities of the Li atom and the Be{sup +} ion

The dynamic dipole polarizabilities for Li atoms and Be{sup +} ions in the 2 {sup 2}S and 2 {sup 2}P states are calculated using the variational method with a Hylleraas basis. The present polarizabilities represent the definitive values in the nonrelativistic limit. Corrections due to relativistic effects are also estimated. Analytic representations of the polarizabilities for frequency ranges encompassing the n=3 excitations are presented. The recommended polarizabilities for {sup 7}Li and {sup 9}Be{sup +} are 164.11{+-}0.03 a{sub 0}{sup 3} and 24.489{+-}0.004 a{sub 0}{sup 3}, respectively.

74 ATOMIC AND MOLECULAR PHYSICS↗

MHz gravitational wave constraints with decameter Michelson interferometers

A new detector, the Fermilab Holometer, consists of separate yet identical 39-meter Michelson interferometers. Strain sensitivity achieved is better than 10 –21 /√Hz between 1 to 13 MHz from a 130-h data set. This measurement exceeds the sensitivity and frequency range made from previous high frequency gravitational wave experiments by many orders of magnitude. Constraints are placed on a stochastic background at 382 Hz resolution. The 3σ upper limit on Ω GW , the gravitational wave energy density normalized to the closure density, ranges from 5.6 × 10 12 at 1 MHz to 8.4 × 10 15 at 13 MHz. Another result from the same data set is a search for nearby primordial black hole binaries (PBHB). There are no detectable monochromatic PBHBs in the mass range 0.83–3.5 × 10 21 g between the Earth and the Moon. Projections for a chirp search with the same data set increase the mass range to 0.59–2.5 × 10 25 g and distances out to Jupiter. Furthermore, this result presents a new method for placing limits on a poorly constrained mass range of primordial black holes. Additionally, solar system searches for PBHBs place limits on their contribution to the total dark matter fraction.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

THE SOLAR DECIMETRIC SPIKE BURST OF 2006 DECEMBER 6: POSSIBLE EVIDENCE FOR FIELD-ALIGNED POTENTIAL DROPS IN POST-ERUPTION LOOPS

A 1.4 GHz solar radio burst associated with a 3B/X6 eruptive flare on 2006 December 6 had the highest peak flux density ({approx}10{sup 6} sfu) of any event yet recorded at this frequency. The decimetric event characteristics during the brightest emission phase (numerous intense, short-lived, narrow-band bursts that overlapped to form a continuous spectrum) suggest electron cyclotron maser (ECM) emission. The peak 1.4 GHz emission did not occur during the flare impulsive phase but rather {approx}45 minutes later, in association with post-eruption loop activity seen in H{alpha} and by the Hinode EUV Imaging Spectrometer. During the Waves/LASCO era, three other delayed bursts with peak intensities >10{sup 5} sfu in the 1.0-1.6 GHz (L-band) frequency range have been reported that appear to have characteristics similar to the December 6 burst. In each of these three cases, high-frequency type IV bursts were reported in a range from {approx}150 to {approx}1500 MHz. Assuming a common ECM emission mechanism across this frequency range implies a broad span of source heights in the associated post-eruption loop systems. Difficulties with an ECM interpretation for these events include the generation of the lower frequency component of the type IVs and the long-standing problem of escape of the ECM emission from the loops. Magnetic-field-aligned potential drops, analogous to those observed for Earth's auroral kilometric radiation, could plausibly remove both of these objections to ECM emission.

79 ASTRONOMY AND ASTROPHYSICS↗

Narrow-band near-field nanoscopy in the spectral range from 1.3 to 8.5 THz

Nano-spectroscopy in the terahertz frequency range remains challenging despite recent technological progress in developing both THz emitter sources and near-field optical microscopy (SNOM). Here, we combine scattering-type SNOM with a free-electron laser light source, to tune into the 1.3–8.5 THz range. A significant portion of this range, namely, the frequencies above ∼3 THz, is not covered by previously reported near-field microscopy systems. However, it constitutes an indispensable regime where many elementary processes in solids including collective lattice excitations, charge, and spin transport occur. Our approach of nano-spectroscopy and nano-imaging provides a versatile analysis of nanostructures as small as 50 nm, hence beating the optical diffraction limit by λ/4600.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Latitudinal beaming of Jupiter's low frequency radio emissions

By comparing RAE-1 and IMP-6 satellite measurements of Jupiter's radio emission near 1MHz with recent Voyager-1 and 2 observations in the same frequency range, the properties of the low frequency radiation pattern over a 10 deg range of latitudes with respect to the Jovian rotation equator can be studied. These observations, which cover a wider latitudinal range than is possible from the earth, are consistent with many aspects of earlier ground-based measurements used to infer a sharp beaming pattern for the decameter wavelength emissions. Marked, systematic changes are found in the statistical occurrence probability distributions with system 3 central meridian longitude as the jovigraphic latitude of the observer changes over this range. Simultaneous observations by the two Voyager spacecraft suggest that the instantaneous beam width may be no more than a few degrees at times. The new hectometer-wave results can be interpreted in terms of a narrow, curved sheet at a fixed magnetic latitude into which the emission is beamed to escape the planet.

Alexander, J. K.↗

Dielectric Properties of Nanocrystalline Tungsten Oxide in the Temperature Range of 223–293 K

The dielectric properties of nanocrystalline tungsten oxide are studied in the temperature range of 223–293 K and in the frequency range ν = 10{sup –2}–10{sup 6} Hz. Powders of WO{sub 3} with particle sizes of 110, 150, and 200 nm are prepared by the heat treatment of ammonium paratungstate at various temperatures. It is established that the frequency dependences of the conductivity for all samples increase with an increase in frequency, while the polarization characteristics ε'(ν) and ε'(ν) decrease. It is found that the frequency dependences of the conductivity are described by a function of the form ν{sup s} with an index in the range of (0.83–0.90) ± 0.01, which is characteristic of the “hopping” mechanism of charged-particle motion (complexes) over localized states confined by potential barriers and structural defects.

36 MATERIALS SCIENCE↗

Structural, Bulk Permittivity, and Magnetic Properties of Lead-Free Electronic Material: Ba{sub 1}Bi{sub 1}Cu{sub 1}Fe{sub 1}Ni{sub 1}Ti{sub 3}O{sub 12}

In this report, Ba{sub 1}Bi{sub 1}Cu{sub 1}Fe{sub 1}Ni{sub 1}Ti{sub 3}O{sub 12} (BBCFNTO termed further) ceramics were synthesized using a conventional ceramic processing route. The formation of multiple phases has been confirmed from by the XRD pattern at room temperature. The surface micrograph indicates the uniform distribution of grains with distinct grain boundary. The co-relation between the impedance and dielectric parameters was realized by using a phase sensitive meter over a good temperature and frequency range. The temperature- and frequency-dependent dielectric properties are linked to the conduction mechanism. The dielectric constant (K) and loss (tanδ) are increased sharply at high-temperature region, which is expected to be the onset of dipolar relaxation phenomena. The contribution of grain boundary (GBs) and grain (Gs) effects can be identified using the complex impedance spectroscopy. This synthesized material is investigated to model multifunctional devices.

36 MATERIALS SCIENCE↗

Fine Structure of Magnetospheric Magnetosonic Waves: 1. Elementary Rising‐Tone Emissions Within Individual Harmonic

Abstract The present study uncovers the fine structures of magnetosonic waves by investigating the EFW waveforms measured by Van Allen Probes. We show that each harmonic of the magnetosonic wave may consist of a series of elementary rising‐tone emissions, implying a nonlinear mechanism for the wave generation. By investigating an elementary rising‐tone magnetosonic wave that spans a wide frequency range, we show that the frequency sweep rate is likely proportional to the wave frequency. We studied compound rising‐tone magnetosonic waves, and found that they typically consist of multiple harmonics in the source region, and may gradually become continuous in frequency as they propagate away from source. Both elementary and compound rising‐tone magnetosonic waves last for ∼1 min which is close to the bounce period of the ring proton distribution, but their relation is not fully understood.

Li, Jinxing↗

Observation of microwave-assisted magnetization reversal in perpendicular recording media

This letter reports microwave-assisted magnetization reversal (MAMR) in a 700-Gbit/in2 perpendicular media sample. The microwave fields were applied by placing a coplanar waveguide on the media sample and feeding it with narrow microwave pulses. The switching states of the media grains were measured by magnetic force microscopy. For microwaves with a frequency close to the ferromagnetic resonance (FMR) frequency of the media, MAMR was observed for microwave power higher than a certain threshold. For microwaves with certain high power, MAMR was observed for a broad microwave frequency range which covers the FMR frequency and is centered below the FMR frequency.

36 MATERIALS SCIENCE↗

Admittance of multiterminal quantum Hall conductors at kilohertz frequencies

We present an experimental study of the low frequency admittance of quantum Hall conductors in the [100 Hz, 1 MHz] frequency range. We show that the frequency dependence of the admittance of the sample strongly depends on the topology of the contacts connections. Our experimental results are well explained within the Christen and Büttiker approach for finite frequency transport in quantum Hall edge channels taking into account the influence of the coaxial cables capacitance. In the Hall bar geometry, we demonstrate that there exists a configuration in which the cable capacitance does not influence the admittance measurement of the sample. In this case, we measure the electrochemical capacitance of the sample and observe its dependence on the filling factor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the minimal set of plasma parameters to determine the dispersion law of electron whistler waves

The minimal sufficient set of plasma parameters is presented to describe the dispersion properties of electron whistler waves (helicons) in a wide frequency range above the ion cutoff frequency, provided that the wave frequency is significantly lower than the electron plasma frequency. When the gyrofrequency of the lightest ions is much higher than those of heavier ions, it is sufficient to know the relative content of the lightest ions, the highest ion cutoff frequency, the lower hybrid resonance frequency, and the electron gyro- and plasma frequencies. In this case, the frequency of electron whistler waves is determined by the upper root of the biquadratic equation derived, whereas the lower root corresponds to a resonant mode with its refractive index increasing when the frequency tends toward the highest ion gyrofrequency from below. The developed approach is also efficient in plasmas containing a substantial amount of negative ions and/or heavy dust particulates. The accuracy of the approximate solution of the total cold plasma dispersion relation is illustrated graphically.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Gain of Object/Slot Array On Infinite Cylinder Operating At Fundamental Cavity Modes

This report examines the coupling into a circumferential slot array on an infinite cylinder with a finite length interior cavity operating at the fundamental cavity modal frequencies. The directivity gain associated with the interior cavity field is examined, and in this frequency range (as well as lower frequencies), is found to be enhanced by the exterior short circuit current variation with angle driving the slots.

42 ENGINEERING↗

The effect of oblique angle of sound incidence, realistic edge conditions, curvature and in-plane panel stresses on the noise reduction characteristics of general aviation type panels

Experiments and a theoretical analysis were conducted to predict the noise reduction of inclined and curved panels. These predictions are compared to the experimental results with reasonable agreement between theory and experiment for panels under an oblique angle of sound incidence. Theoretical as well as experimental results indicate a big increase in noise reduction when a flat test panel is curved. Further curving the panel slightly decreases the noise reduction. Riveted flat panels are shown to give a higher noise reduction in the stiffness-controlled frequency region, while bonded panels are superior in this region when the test panel is curved. Experimentally measured noise reduction characteristics of flat aluminum panels with uniaxial in-plane stresses are presented and discussed. These test results indicate an important improvement in the noise reduction of these panels in the frequency range below the fundamental panel/cavity frequency.

Grosveld, F.↗

Radar observation of snowpacks

Radar observations of snowpacks were made at test sites in Kansas, South Dakota, and Colorado using truck mounted scatterometers covering the 1 to 18 GHz frequency range and the atmospheric window frequency of 35 GHz. Experiments were conducted as a function of snow depth, wetness, and surface roughness. The acquired data were used to model the backscattering coefficient in terms of snow and underlying soil parameters. The results indicate that the radar return (1) increase with increasing water equivalent; (2) decrease with increasing wetness; (3) is sensitive to the snow surface roughness only when the snow is wet;(4) is sensitive to the state (frozen or thawed) of the underlying soil if the snow is dry; and (5) is repetitive from one site to another and from one season to the next. Additionally, the measurements indicate the multifrequency observation or day-night observations may potentially provide the means for monitoring snow water equivalent, snow wetness, and the soil state.

Stiles, W. H.↗

Spectrophone stabilization and offset tuning of a carbon dioxide waveguide laser

A sensitive spectrophone containing CO2 gas is incorporated into a feedback loop to stabilize the frequency of a CO2 waveguide laser. First or second harmonic detection combined with a zero offset feature and the relatively high operating pressure of the laser allows continuous tuning of the stabilized frequency over a 400 MHz range. Frequency stability of better than + or - 1 MHz is achieved.

Kavaya, M. J.↗

Scattering from a microstrip patch

A solution to the problem of plane wave scattering by a rectangular microstrip patch on a grounded dielectric substrate is presented. The model does not include the microstrip feed, and thus doe not include the so-called 'antenna mode' component of the scattering. The solution begins by formulating an electric field integral equation for the surface current density on the microstrip patch. The integral equation is solved using the method of moments. Computed data for the patch radar cross section (RCS) is found to be in close agreement with measurements over a broad frequency range. The microstrip RCS versus frequency consists of a number of large peaks which are identified as impedance or pattern factor resonance peaks.

Newman, Edward H.↗