Search NASA⌕ Search

SEARCH · Search NASA

Results for “graph model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Electrostatic waves stimulated by coherent VLF signals propagating in and near the inner radiation belt

The excitation of electrostatic waves by whistler-mode VLF signals propagating along magnetic-field lines in and near the earth's inner radiation belt is examined on the basis of ISEE-1 observations obtained during July-December 1983. The data are presented in extensive graphs and characterized in detail. The effect is seen in about 60 percent of the ISEE-1 orbits penetrating the belt and for signals originating in both hemispheres, with an electrostatic-wave effective bandwidth roughly proportional to the local magnetic-field strength. These results are interpreted in terms of a theoretical model in which scattering of the VLF waves off magnetic-field-aligned plasma density irregularities is followed by particle pitch-angle scattering and precipitation in the radiation belt; the latter effect could then produce new irregularities via a feedback mechanism.

Bell, T. F.↗
NASA NTRS1989

Mechanics of unsymmetric laminates

Theoretical models describing the mechanical behavior of fiber-reinforced composite laminates are developed analytically and demonstrated. The curing of composite structures and the out-of-plane shapes of unsymmetric laminates are discussed and illustrated with photographs; the derivation of the governing equations is outlined; numerical results for typical laminates are presented in graphs; and particular attention is given to stability considerations and the effects of material properties, laminate thickness, aspect ratio, and stacking sequence.

Hyer, M. W.↗
NASA NTRS1991

Enhanced ATAMM for increased throughput performance of multicomputer data flow architectures

The Algorithm To Architecture Mapping Model (ATAMM) is a Petri-net-based model which provides a strategy for periodic execution of a class of real-time algorithms on multicomputer dataflow architectures. The problem domain of particular interest is the execution of large-grained, decision-free algorithms on homogeneous processing elements. Design techniques are discussed and performance measurements are defined. A multiple-graph execution strategy is shown to increase throughput performance. It is shown that the same increase in performance is attainable with minor modifications to the existing ATAMM.

Jones, R. L.↗
NASA NTRS2009

Graphical User Interface for Simulink Integrated Performance Analysis Model

The J-2X Engine (built by Pratt & Whitney Rocketdyne,) in the Upper Stage of the Ares I Crew Launch Vehicle, will only start within a certain range of temperature and pressure for Liquid Hydrogen and Liquid Oxygen propellants. The purpose of the Simulink Integrated Performance Analysis Model is to verify that in all reasonable conditions the temperature and pressure of the propellants are within the required J-2X engine start boxes. In order to run the simulation, test variables must be entered at all reasonable values of parameters such as heat leak and mass flow rate. To make this testing process as efficient as possible in order to save the maximum amount of time and money, and to show that the J-2X engine will start when it is required to do so, a graphical user interface (GUI) was created to allow the input of values to be used as parameters in the Simulink Model, without opening or altering the contents of the model. The GUI must allow for test data to come from Microsoft Excel files, allow those values to be edited before testing, place those values into the Simulink Model, and get the output from the Simulink Model. The GUI was built using MATLAB, and will run the Simulink simulation when the Simulate option is activated. After running the simulation, the GUI will construct a new Microsoft Excel file, as well as a MATLAB matrix file, using the output values for each test of the simulation so that they may graphed and compared to other values.

Durham, R. Caitlyn↗
NASA NTRS1984

On the generation and evolution of internal gravity waves

The tidal generation and evolution of internal gravity waves is investigated experimentally and theoretically using a two-dimensional two-layer model. Time-dependent flow is created by moving a profile of maximum submerged depth 7.7 cm through a total stroke of 29 cm in water above a freon-kerosene mixture in an 8.6-m-long 30-cm-deep 20-cm-wide transparent channel, and the deformation of the fluid interface is recorded photographically. A theoretical model of the interface as a set of discrete vortices is constructed numerically; the rigid structures are represented by a source distribution; governing equations in Lagrangian form are obtained; and two integrodifferential equations relating baroclinic vorticity generation and source-density generation are derived. The experimental and computed results are shown in photographs and graphs, respectively, and found to be in good agreement at small Froude numbers. The reasons for small discrepancies in the position of the maximum interface displacement at large Froude numbers are examined.

Lansing, F. S.↗
NASA NTRS1986

Universal amplitude ratios and the interfacial tension near consolute points of binary liquid mixtures

The interfacial tension of the binary liquid mixtures triethylamine/heavy water, triethylamine/water, and cyclohexane/methanol near their consolute temperatures is determined experimentally by measuring the densities of the phases and the capillary lengths. The results are presented in tables and graphs and compared with published data obtained by other methods and with theoretical predictions. The findings are shown to be in good agreement with previous experiments, confirming the discrepancy between temperature-independent universal amplitude ratios calculated from such data and those predicted by renormalization-group calculations or Monte Carlo simulations of Ising models.

Moldover, M. R.↗
NASA NTRS1988

Unmagnetized diffusion for azimuthally symmetric wave and particle distributions

The quasi-linear diffusion of particles from resonant interactions with a spectrum of electrostatic waves is investigated theoretically, extending results obtained for no magnetic field and for strong magnetic fields to cases where the ambient magnetic field which organizes azimuthally symmetric wave and particle distributions does not have to be taken into consideration in evaluating the local interaction. The derivation of the governing equations is explained, and numerical results are presented in extensive graphs and characterized in detail. Slow-mode ion-acoustic waves are shown to be unstable under the plasma conditions studied, and the dependence of resonant-ion diffusion rates with pitch angle, speed, and the distribution of wave energy in wavenumber space is explored. The implications of the present findings for theoretical models of the earth bow shock and plasma-sheet boundary layer are indicated.

Dusenbery, P. B.↗
NASA NTRS1989

Charged particle radiation exposure of geocentric satellites

The near-earth radiation environment is characterized, summarizing published data on trapped and transient charged particles and their potential effects on hardware systems and the crews of manned missions. Topics examined include the role of the magnetosphere, the five radiation domains, cyclic and sporadic variations in the radiation environment, the potential effect of a high-altitude nuclear explosion, NASA empirical models for predicting trapped proton and electron fluxes, and the South Atlantic anomaly and the estimation of flux-free periods. Consideration is given to solar cosmic rays and heavy ions, Galactic cosmic rays, geomagnetic shielding, secondary radiation, the design of shielding systems, variables affecting dose evaluations, and ionizing-radiation doses. Extensive diagrams, graphs, and tables of numerical data are provided.

Stassinopoulos, E. G.↗
NASA NTRS1991

The three-point correlation function for Abell clusters - Observations and simulations

Results are reported of a 3D study tracing the three-point correlation function of Abell clusters and of a comparison of this with the biased cold dark matter (CDM) simulations of Park (1990). For the observations, the maximum likelihood fits are Z11 = 0.85 and Q111 = 0.1, in excellent agreement with the result of the 2D study of Toth et al. (1989). For Park's simulation, maximum likelihood fits of Q11 = 0.9 and Q111 = 0.0 are found, which is in excellent agreement with the observational result. It is concluded that the standard biased CDM gravitational instability model reproduces the observed form of the three-point correlation functions for Abell clusters remarkably well. The number of triples as a function of the sides of triangles for Abell clusters, and the number of triples as a function of the sides of triangles for clusters in Park's simulation are illustrated on graphs.

Gott, J. R., III↗
NASA NTRS2011

NASA Tech Briefs, December 2011

Topics covered include: 1) SNE Industrial Fieldbus Interface; 2) Composite Thermal Switch; 3) XMOS XC-2 Development Board for Mechanical Control and Data Collection; 4) Receiver Gain Modulation Circuit; 5) NEXUS Scalable and Distributed Next-Generation Avionics Bus for Space Missions; 6) Digital Interface Board to Control Phase and Amplitude of Four Channels; 7) CoNNeCT Baseband Processor Module; 8) Cryogenic 160-GHz MMIC Heterodyne Receiver Module; 9) Ka-Band, Multi-Gigabit-Per-Second Transceiver; 10) All-Solid-State 2.45-to-2.78-THz Source; 11) Onboard Interferometric SAR Processor for the Ka-Band Radar Interferometer (KaRIn); 12) Space Environments Testbed; 13) High-Performance 3D Articulated Robot Display; 14) Athena; 15) In Situ Surface Characterization; 16) Ndarts; 17) Cryo-Etched Black Silicon for Use as Optical Black; 18) Advanced CO2 Removal and Reduction System; 19) Correcting Thermal Deformations in an Active Composite Reflector; 20) Umbilical Deployment Device; 21) Space Mirror Alignment System; 22) Thermionic Power Cell To Harness Heat Energies for Geothermal Applications; 23) Graph Theory Roots of Spatial Operators for Kinematics and Dynamics; 24) Spacesuit Soft Upper Torso Sizing Systems; 25) Radiation Protection Using Single-Wall Carbon Nanotube Derivatives; 26) PMA-PhyloChip DNA Microarray to Elucidate Viable Microbial Community Structure; 27) Lidar Luminance Quantizer; 28) Distributed Capacitive Sensor for Sample Mass Measurement; 29) Base Flow Model Validation; 30) Minimum Landing Error Powered-Descent Guidance for Planetary Missions; 31) Framework for Integrating Science Data Processing Algorithms Into Process Control Systems; 32) Time Synchronization and Distribution Mechanisms for Space Networks; 33) Local Estimators for Spacecraft Formation Flying; 34) Software-Defined Radio for Space-to-Space Communications; 35) Reflective Occultation Mask for Evaluation of Occulter Designs for Planet Finding; and 36) Molecular Adsorber Coating

Source record↗
NASA NTRS1978

Analysis of simulated measurements of earth emitted radiation using geometric shape factors, and some results from analysis of ESSA 7 and Nimbus 6 data

In the reported study, simulated measurements of earth radiation with wide field-of-view (WFOV) radiometers are reduced to earth fluxes through geometric shape factors. Estimates of emitted flux for global and zonal scales and for regions smaller than the detector field-of-view are compared to fluxes derived directly from a model. Geometric shape factors are used to estimate global, zonal, and regional averages of earth-emitted flux from measurements with WFOV detectors on the ESSA 7 satellite and the Nimbus 6 satellite. Zonal and global averages of emitted flux for each of the 3-month periods of ESSA 7 data are shown in a graph. Another graph shows zonal and global averages of emitted flux for August 1975 obtained with the aid of Nimbus 6. The data are compared to values reported by Green and Smith (1977) who used a spherical harmonic solution.

Weaver, W. L.↗
NASA NTRS1984

Ultraviolet photometry from the Orbiting Astronomical Observatory. XXXIX - The structure of the eclipsing Wolf-Rayet binary V444 Cygni as derived from light curves between 2460 A and 3. 5 microns

The WN5 component of V444 Cyg is characterized on the basis of light curves constructed using 1971 OAO observations at 425, 332, 298, and 246 nm and the broadband data at 2.2 and 3.5 microns of Hartmann (1978). Data and calculation results are presented in tables and graphs and discussed. Parameters estimated include core radius 2.9 solar radii, surface temperature 90,000 K, surface electron density 9 x 10 to the 12th/cu cm, surface outflow velocity 400 km/s, and terminal velocity (at about 10 solar radii) 2500 km/s, suggesting that the flow is He. These results are found to agree with the model of Wolf-Rayet atmospheres proposed by Beals (1929, 1944).

Cherepashchuk, A. M.↗
NASA NTRS1987

The factor of scale in remote sensing

A method that measures the spatial structure of images as a function of spatial resolution is presented for selecting the appropriate scale for remote sensing. Graphs are obtained by imaging the scene at fine resolution and then collapsing the image to successively coarser resolutions while calculating the local variance. For the spatial resolution of SPOT and TM imagery, local image variance is relatively high for forested and urban/suburban environments, indicating that information-extraction techniques using texture, context, and mixture modeling are appropriate for these sensor systems. For agricultural environments where local variance is low, more traditional classifiers are appropriate.

Woodcock, Curtis E.↗
NASA NTRS1987

Chromospheres and transition regions

The properties of stellar chromospheres are examined, summarizing the results of observations obtained with the IUE satellite since its launch in 1978. Numerous sample spectra, graphs, and diagrams are presented and analyzed in detail. Consideration is given to 120-320-nm spectroscopy of main-sequence stars, giants, and supergiants; the global properties of main-sequence and post-main-sequence chromospheres; dynamic phenomena and structures (systematic flows, atmospheric inhomogeneities, and intrinsic variability); and structural and energy-balance modeling. A number of outstanding problems are listed, and the potential value of data from the Hubble Space Telescope and the Lyman FUV Spectroscopic Explorer in solving them is indicated.

Jordan, Carole↗
NASA NTRS2000

Thermal Aspects of Lithium Ion Cells

This viewgraph presentation outlines the development of a thermal model of Li-ion cells in terms of heat generation, thermal mass, and thermal resistance. Intended for incorporation into battery model. The approach was to estimate heat generation: with semi-theoretical model, and then to check accuracy with efficiency measurements. Another objective was to compute thermal mass from component weights and specific heats, and to compute the thermal resistance from component dimensions and conductivities. Two lithium batteries are compared, the Cylindrical lithium battery, and the prismatic lithium cell. It reviews methodology for estimating the heat generation rate. Graphs of the Open-circuit curves of the cells and the heat evolution during discharge are given.

Frank, H.↗
NASA NTRS2012

HURON (HUman and Robotic Optimization Network) Multi-Agent Temporal Activity Planner/Scheduler

HURON solves the problem of how to optimize a plan and schedule for assigning multiple agents to a temporal sequence of actions (e.g., science tasks). Developed as a generic planning and scheduling tool, HURON has been used to optimize space mission surface operations. The tool has also been used to analyze lunar architectures for a variety of surface operational scenarios in order to maximize return on investment and productivity. These scenarios include numerous science activities performed by a diverse set of agents: humans, teleoperated rovers, and autonomous rovers. Once given a set of agents, activities, resources, resource constraints, temporal constraints, and de pendencies, HURON computes an optimal schedule that meets a specified goal (e.g., maximum productivity or minimum time), subject to the constraints. HURON performs planning and scheduling optimization as a graph search in state-space with forward progression. Each node in the graph contains a state instance. Starting with the initial node, a graph is automatically constructed with new successive nodes of each new state to explore. The optimization uses a set of pre-conditions and post-conditions to create the children states. The Python language was adopted to not only enable more agile development, but to also allow the domain experts to easily define their optimization models. A graphical user interface was also developed to facilitate real-time search information feedback and interaction by the operator in the search optimization process. The HURON package has many potential uses in the fields of Operations Research and Management Science where this technology applies to many commercial domains requiring optimization to reduce costs. For example, optimizing a fleet of transportation truck routes, aircraft flight scheduling, and other route-planning scenarios involving multiple agent task optimization would all benefit by using HURON.

Hua, Hook↗
NASA NTRS1991

Simulator for enhanced ATAMM multiprocessing

A simulator is introduced which follows the rules of the enhanced Algorithm to Architecture Mapping Model (ATAMM) multiprocessing strategy. ATAMM is a method for embedding an algorithm into a multiprocessing system in addition to providing system performance prediction capabilities. A discussion of the inner workings of the Architecture Design and Assessment System (ADAS) hosted simulator is introduced to illustrate how the simulator follows the ATAMM rule set. A sample 5-node algorithm graph is given as an example to illustrate: (1) entering of a graph into the simulator and how to run the graph using a graph entry tool; (2) how to analyze the data; and (3) a comparison of the simulation results with the predicted results from ATAMM.

Andrews, Asa M.↗
NASA NTRS2012

Jupiter Environment Tool

The Jupiter Environment Tool (JET) is a custom UI plug-in for STK that provides an interface to Jupiter environment models for visualization and analysis. Users can visualize the different magnetic field models of Jupiter through various rendering methods, which are fully integrated within STK s 3D Window. This allows users to take snapshots and make animations of their scenarios with magnetic field visualizations. Analytical data can be accessed in the form of custom vectors. Given these custom vectors, users have access to magnetic field data in custom reports, graphs, access constraints, coverage analysis, and anywhere else vectors are used within STK.

Sturm, Erick J.↗