Search NASA⌕ Search

SEARCH · Search NASA

Results for “hexagonal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

CVD growth of graphene under exfoliated hexagonal boron nitride for vertical hybrid structures

Graphical abstract: We have demonstrated a novel yet simple method for fabricating graphene-based vertical hybrid structures by performing the CVD growth of graphene at an h-BN/Cu interface. Our systematic Raman measurements combined with plasma etching process indicate that a graphene film is grown under exfoliated h-BN rather than on its top surface, and that an h-BN/graphene vertical hybrid structure has been fabricated. Electrical transport measurements of this h-BN/graphene, transferred on SiO2, show the carrier mobility up to approximately 2250 cm{sup 2} V{sup −1} s{sup −1}. The developed method would enable the exploration of the possibility of novel hybrid structure integration with two-dimensional material systems. - Abstract: We have demonstrated a novel yet simple method for fabricating graphene-based vertical hybrid structures by performing the CVD growth of graphene at an h-BN/Cu interface. Our systematic Raman measurements combined with plasma etching process indicate that a graphene film is grown under exfoliated h-BN rather than on its top surface, and that an h-BN/graphene vertical hybrid structure has been fabricated. Electrical transport measurements of this h-BN/graphene, transferred on SiO{sub 2}, show the carrier mobility up to approximately 2250 cm{sup 2} V{sup −1} s{sup −1}. The developed method would enable the exploration of the possibility of novel hybrid structure integration with two-dimensional material systems.

36 MATERIALS SCIENCE↗

Hexagonal boron nitride luminescence dependent on vacuum level and surrounding gases

Highlights: • 400 nm Luminescence of hBN powder is sensitive to surrounding vacuum or oxygen gas. • Decrease of hBN powder grain size improves its oxygen sensing properties. • hBN powder is proposed as prospective material for oxygen gas sensors. - Abstract: Gas sensing properties of hBN powder bulk and nanosize were studied. It was demonstrated that for hBN powders with grain sizes of 70 nm, 1 μm and 5 μm the native defect-induced luminescence observed at 400 nm under 265 nm light excitation and room temperature is sensitive to oxygen gas reducing luminescence intensity. The highest value of luminescence intensity is reached when sample is in vacuum. Results obtained allow conclusion that the hBN powder is prospective for sensing of oxygen gas. Some material properties such as dependence of luminescence intensity on vacuum level and pumping time, ratio of luminescence intensity when sample is in vacuum and gas, its dependence on material grain size were studied.

36 MATERIALS SCIENCE↗

Two-level quenching of photoluminescence in hexagonal boron nitride micropowder

The processes of photoluminescence thermal quenching in the range RT – 800 K of h-BN micropowder in the 3.56 eV band were studied. It was found that two non-radiative channels of excitations relaxation with activation energies of 0.27 and 0.81 eV control the quenching for emission observed. It was assumed that emptying the shallow traps based on O{sub N}-centers characterized external quenching in RT – 530 K range and non-radiative mechanism of donor-acceptor recombination began to dominate at T > 530 K.

36 MATERIALS SCIENCE↗

Interface structures and twinning mechanisms of {1¯012} twins in hexagonal metals

In this paper, a controversy concerning the description of {1¯012} {1¯012} twinning, whether it is shear-shuffle or pure glide-shuffle or pure shuffle, has developed. There is disagreement about the interpretation of transmission electron microscopic observations, atomistic simulations and theories for twin growth. In this article, we highlight the atomic-level, characteristic, equilibrium and non-equilibrium boundaries and corresponding boundary defects associated with the three-dimensional ‘normal’, ‘forward’ and ‘lateral’ propagation of {1¯011} growth/annealing and deformation twins. Although deformation twin boundaries (TBs) after recovery exhibit some similarity to growth/annealing TBs because of the plastic accommodation of stress fields, there are important distinctions among them. These distinctions distinguish among the mechanisms of twin growth and resolve the controversy. In addition, a new type of disconnection, a glide disclination, is described for twinning. Synchroshear, seldom considered, is shown to be a likely mechanism for {1¯012} twinning.

36 MATERIALS SCIENCE↗

Electronic structure of two-dimensional hexagonal diselenides: Charge density waves and pseudogap behavior

We theoretically study the electronic structure (spectral functions and Fermi surfaces) of incommensurate pseudogap and charge density wave (CDW) and commensurate CDW phases of quasi-two-dimensional diselenides 2H-TaSe{sub 2} and 2H-NbSe{sub 2}. The incommensurate pseudogap regime is described within the scenario based on short-range-order CDW fluctuations, considered within the static Gaussian random field model. In contrast, e.g., to high-T{sub c} cuprates, layered dichalcogenides have several different CDW scattering vectors and an electronic spectrum with two bands at the Fermi level. For this, we present a theoretical background for the description of multiple scattering processes within a multiple-band electronic spectrum. Theoretical spectral functions and Fermi surfaces thus obtained are compared with recent ARPES experimental data, demonstrating rather good qualitative agreement.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced Microwave Absorption Properties of Doped M-Type Barium Hexagonal Ferrites in Ka-band Frequencies

The present study reports the microwave absorption characteristics of La{sup 3+}-Na{sup +} substituted barium hexaferrites with chemical composition: Ba{sub (1−2x)}La{sub x}Na{sub x}Fe{sub 10}CoTiO{sub 19} and Ba{sub (1−2x)}La{sub x}Na{sub x}Fe{sub 10}Co{sub 0.5}TiMn{sub 0.5}O{sub 19} (0.00 ≤ x ≤ 0.25) respectively in Ka-band frequencies. The electromagnetic characteristics such as complex permittivity, complex permeability, and microwave absorption properties were studied using Vector Network Analyzer in 26.5–40.0 GHz frequency band. Dielectric properties showed almost constant variation with increase in frequency. Magnetic permeability spectra observed wavy variation with frequency. Comparing the electromagnetic properties of two series, it is observed that Co–Ti–Mn series observes higher values of electromagnetic properties in comparison to Co–Ti series. For composition x = 0.15 of Ba{sub (1−2x)}La{sub x}Na{sub x}Fe{sub 10}Co{sub 0.5}TiMn{sub 0.5}O{sub 19} series, −55.33 dB reflection loss at 30 GHz frequency with −10 dB absorption bandwidth around 3.51 GHz has been observed. Thus, these materials can be employed as effective absorbers for Ka-band microwave absorbers.

36 MATERIALS SCIENCE↗

Designing a high sensitivity hexagonal nano-cavity photonic crystal resonator for the purpose of seawater salinity sensing

In this paper a sensing platform based on nano-cavity photonic crystal resonator (NC-PCR) is proposed for seawater salinity concentration detection. It has been demonstrated that the proposed NC-PCR has high sensitivity and selectivity for various concentrations of seawater salinity. The sensitivity is computed to be as high as 544 nm/RIU (nm per refractive index unit) and the quality factor (Q) is 3860. Also it has been shown that the figure of merit for the proposed structure calculated to be as high as ~ 1.234 × 10{sup 3} RIU{sup −1} which is very appropriate for sensing applications. Moreover, the minimum detection limit for the presented structure is obtained as 8.1 × 10{sup −5} RIU. The finite-difference time-domain method is employed to investigate the transmission characteristics of the device for a verity of refractive indices. It should also be mentioned that our design is comparatively easy to fabricate and certainly the advantages of our design justify its usage in sensing applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of Aluminum Addition on the Evolution of Microstructure, Crystallographic Texture and Mechanical Properties of Single Phase Hexagonal Close Packed Mg-Li Alloys

In the present investigation, an effort has been made to understand the effect of aluminum addition to α Mg-Li alloys. The corresponding composition Mg-4Li-xAl (x = 0, 2, 4 and 6 wt.%) alloys have been prepared by stir casting route under an argon environment. Extrusion was carried out at 300 °C with the extrusion ratio of 15:1. Significant grain refinement was observed after extrusion. X-ray diffraction-based investigation of the cast and extruded alloys showed the presence of intermetallic compounds such as Mg{sub 17}Al{sub 12} and AlLi in the Al-rich alloys namely, Mg-4Li-xAl (x = 4 and 6 wt.%). These precipitates were also present in the extruded plus annealed samples, indicating the stability of the precipitates at high temperature. The bulk x-ray texture measurement revealed a crystallographic texture where the c-axis of the h.c.p crystals was perpendicular to the extrusion direction (ED) for extruded sample. A texture transition was observed on annealing. The c-axis was oriented parallel to the ED. Mechanical properties of the cast, extruded and extruded plus annealed material illustrate that the addition of Al led to enhancement in hardness, yield strength and ultimate tensile strength.

36 MATERIALS SCIENCE↗

Spectroscopic signatures of edge states in hexagonal boron nitride

Here, we use Z-contrast imaging and atomically resolved electron energy-loss spectroscopy on an aberration-corrected scanning transmission electron microscope to investigate the local electronic states of boron atoms at different edge structures in monolayer and bilayer h-BN. We find that edges with bonding unsaturated sp2 boron atoms have a unique spectroscopic signature with a prominent pre-peak at ~ 190.2 eV in the B K-edge fine structure. First-principles calculations reveal that the observed pre-peak arises from excitations to the in-plane lowest-energy empty sp 2 boron dangling bonds at the B-terminated edge. This spectroscopic signature can serve as a fingerprint to explore new edge structures in h-BN.

edge structure↗

Mapping of crack tip strains and twinned zone in a hexagonal close packed zirconium alloy.

This paper describes the use of synchrotron X-ray diffraction to map crack tip strain field evolution and initiation of twinning under applied load in a fatigue pre-cracked zirconium alloy. Compact tension specimens were machined in two orientations from a textured rolled plate and loaded along the normal direction and the transverse direction to rolling. Residual strains due to fatigue and the strains introduced at applied K, of approximately 10 and 30 MPa{radical}m were measured for the two specimen orientations. Maps of the region of twinned material were determined. The experimental data is compared to finite element (FE) calculations for the crack tip strain fields and a prediction of the size of the twinned region using a multiscale model based on combining an FE approach with an elastoplastic self-consistent polycrystalline plasticity model.

36 MATERIALS SCIENCE↗