Search NASA⌕ Search

SEARCH · Search NASA

Results for “inexpensive”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Jet noise modification by the 'whistler nozzle'

The farfield noise characteristics of a subsonic whistler nozzle jet are measured as a function of Mach number (0.25, 0.37, and, 0.51), emission angle, and excitation mode. It is shown that a whistler nozzle has greater total and broadband acoustic power than an excited contraction nozzle; and that the intensity of far-field noise is a function of emission angle, Mach number, and whistler excitation stage. The whistler nozzle excitation produces broadband noise amplification with constant spectral shape; the broadband noise amplification (without associated whistler tones and harmonics) increases omnidirectionally with emission angle at all Mach numbers; and the broadband amplification factor decreases as Mach number and emission angle increase. Finally the whistler nozzle is described as a very efficient but inexpensive siren with applications in not only jet excitation but also acoustics.

Hasan, M. A. Z.↗
NASA NTRS1983

Development and flight test of an X-band precision approach concept for remote-area rotorcraft operations

A novel airborne radar-based precision approach concept was developed and flight tested as a part of NASA's Rotorcraft All-Weather Operations Research Program. A demonstration, transponder-based beacon landing system (BLS), incorporating state-of-the-art X-band radar technology and digital processing techniques, was built and flight tested to demonstrate the concept feasibility. The BLS airborne hardware consists of an add-on microprocessor, installed in conjunction with the aircraft weather/mapping radar, which analyzes the radar beacon receiver returns and determines range, localizer deviation, and glide slope deviation. The ground station is an inexpensive, portable unit which can be quickly deployed at a landing site. Results from the flight test program show that the BLS concept has a significant potential for providing rotorcraft with low-cost, precision, instrument approach capability in remote areas. Previously announced in STAR as N84-10041

Clary, G. R.↗
NASA NTRS1982

Honeywell multispectral linear array (MLA) instrument design A system overview

In support of NASA's Experimental Land Observing System, a simple, reliable and relatively inexpensive multispectral linear array (MLA) instrument concept has been developed. The design satisfies requirements for multichannel radiometry and wide field imaging. A reflective off-axis anastigmat telescope is mounted in a highly strength-to-weight efficient truss structure, coupled to a solid beamsplitter assembly. Attention is given to the optical design of the MLA instrument, the telescope structure, the detector arrays, detector cooling, on-orbit calibration, signal processing electronics, the spacecraft interfaces, the modulation transfer function, the signal-to-noise ratio, radiometric accuracy, and spatial registration.

Eyring, D.↗
NASA NTRS1983

Simulation studies and the need for field reflectance studies

There is a need to calibrate satellite data obtained at large polar (i.e., off-nadir) view angles for effects caused by scanner geometry and by the atmosphere. If such effects are not corrected for, then recorded radiance data will contain systematic and random errors which will make accurate target identification and quantification difficult. Adequate calibration of digital radiance data requires both an inductive analysis of digital satellite images and a deductive analysis based upon a priori simulation studies. The inputs to a simulation model (ground reflectance, atmospheric transmission and bandscatter) and their variability are dependent upon (for example) sun-target-sensor geometry. There is a major need to make accurate ground reflectance measurements to provide calibration information on the anisotropy of ground reflectance. There is also a need to assess atmospheric transmission and backscatter from the image itself. A potential simple, inexpensive method for making ground reflectance measurements in the above context is discussed.

Duggin, M. J.↗
NASA NTRS1984

Rapid discrimination of granitic rock compositions by low-resolution near-infrared reflectance

The slopes of near-infrared spectra between approximately 1 and 2 microns from quartz-bearing plutonic rocks are strongly correlated with rock chemistry determined by X-ray spectrometry. The empirically derived predictive equations provide compositional data of adequate precision and resolution to discern patterns of regional geochemical variation in granitic batholithic rocks of southern California. As an analytical method, infrared spectrometry is rapid and inexpensive, and the method has potential in applications to direct field measurements and to data from aircraft and spacecraft scanner systems of relatively low spectral and spatial resolution, provided vegetative cover and surface alteration are not prohibitively masking.

Baird, A. K.↗
NASA NTRS1982

Stress measurement in thin films by geometrical optics

A variation of Newton's rings experiment is proposed for measuring film stress. The procedure described, the geometrical optics method, is used to measure radii of curvature for a series of film depositions with Ta, Al, and Mo films. The method has a sensitivity of 1 x 10 to the 9th dyn/sq cm, corresponding to the practical radius limit of about 50 m, and a repeatability usually within five percent. For the purposes of comparison, radii are also measured by Newton's rings method and the Talysurf method; all results are found to be in general agreement. Measurement times are also compared: the geometrical optics method requires only 1/2-1 minute. It is concluded that the geometrical optics method provides an inexpensive, fast, and a reasonably correct technique with which to measure stresses in film.

Rossnagel, S. M.↗
NASA NTRS1984

Simple collimator for use with diamond-anvil cells in a synchrotron beam

A simple double-slit system is described which allows a synchrotron beam to be collimated onto a small sample (approximately 150-micron diameter) in a diamond-anvil cell using remote control. The apparatus can be constructed easily and inexpensively, and allows the shutter positions to be monitored accurately using readily available electronic equipment. A desirable feature of the collimator is the relatively small time needed for adjustment.

Spain, I. L.↗
NASA NTRS1977

An Inventory of Ohio's Land Use/Land Cover as Seen by Landsat

LANDSAT 2 (Land Satellite) was launched at Vandenburg, AFB, California on January 22, 1975. The satellite orbits the earth at an altitude of about 920 km (570 miles) and scans the earth's surface in a continuous track 185 km (115 miles) wide. LANDSAT 2 passes over the same spot every 18 days transmitting scanned data to receiving stations scattered around the globe. LANDSAT's continuously-scanning sensors provide useful information about the earth, one of the most important categories being land use. The statistics contained in the appendices of this report represent acreage and percentage of seven types of land cover in Ohio as seen by LANDSAT. The inventory represents a trial effort at determining the Sate's land cover by a method which is inexpensive, reliable, accurate and rapid. Given a successful method, the inventory and periodic updates could provide information to land use decision-makers and, over a period of time, would reveal patterns of land use change. Technical aspects of the project (process, methodology, and verification) are discussed in Schaal (1977) and Schmidt (1976).

Schaal, Gary M.↗
NASA NTRS1985

Solar-Assisted Oxidation of Toxic Cyanide

In solar-assisted oxidation technique, oxygen-bearing air bubbled through cyanide solution in which platinized powdered TiO2 is suspended. Light from either artifical source or natural Sunlight irradiates. Experiments demonstrated this technique effective in reducing concentration of cyanide to levels well below those achieved by other methods. Results suggest effective and inexpensive method for oxidizing cyanide in industrial wastewaters.

Byvik, C. E.↗
NASA NTRS1985

Spray Application of Rapidly Solidified Metals

Fast and economical process now available. New process applies rapidly solidified (RS) metal coatings to substrates. RS metals made directly from molten material. Have amorphous or microcrystalline structures and yield coatings having superior wear and corrosion resistance. Mixture of RS metal powder and peening particles sprayed from nozzle against surface coated. Powder and peening particles strike surface simultaneously, and impact bonds powder to surface as uniform coating. New process, which employs shot peening, is safe, fast, and inexpensive.

Chu, H. P.↗
NASA NTRS1985

Communications Headgear With Protective Features

Uncomplicated, inexpensive intercom protects head, face, and hearing. Adaptation of highly suitable stock helmet and face shield unit to stock intercom headset provided ideal unit, allowing wearer total use of hands and body while protecting head, face, and hearing. Unit allows wearer to work effectively, efficiently, and safely while communicating from remote areas that require special precautions. Total cost of fabricating unit, using stock parts and including labor, less than $100.

Ward, S. W.↗
NASA NTRS1985

End Restraints for Impact-Energy-Absorbing Tube Specimens

Inexpensive device developed that eliminates tipping problem without affecting crushing process. Device consists of soft sponge-rubber insert approximately 0.5 inches (1.3 centimeters) thick, cut to same diameter as internal diameter of tube specimen. Metal washer, slightly smaller than internal diameter of tube, placed on top of rubber insert. Screw passed through washer and rubber insert and threaded into base of test machine. As screw tightened against washer, rubber insert compressed and expands radially. Radial expansion applies pressure against internal wall of tube specimen, which provides sufficient support to tube to prevent tipping.

Farley, G. L.↗
NASA NTRS1986

Experimental Parallel-Processing Computer

Master processor supervises slave processors, each with its own memory. Computer with parallel processing serves as inexpensive tool for experimentation with parallel mathematical algorithms. Speed enhancement obtained depends on both nature of problem and structure of algorithm used. In parallel-processing architecture, "bank select" and control signals determine which one, if any, of N slave processor memories accessible to master processor at any given moment. When so selected, slave memory operates as part of master computer memory. When not selected, slave memory operates independently of main memory. Slave processors communicate with each other via input/output bus.

Mcgregor, J. W.↗
NASA NTRS1986

Controllers for Flow-Field Survey Apparatus

Control systems of flow-field survey apparatuses of 22-inch (56centimeter) Hypersonic Helium Facility (two-dimensional) and 20-inch (51centimeter) Mach 6 Tunnel (three-dimensional) at Langley Research Center equipped with single-chip microcomputer and single-board microcomputer, respectively, to drive probes at selected speeds and perform other functions automatically. Various modes of operation programed as need arises. Both of these control systems fabricated relatively inexpensively from commercially available stock components.

Ashby George C., JR.↗
NASA NTRS1986

Purifying Water by Imbibition

Concept for purifying water uses absorbent material to remove organic substances. Entire bulk of material employed, not just surface. Proposed purification process uses inexpensive equipment and low energy. Material is methyl acrylate polymer. Material cheap and regenerated by rinsing with methanol or by allowing absorbed compounds to evaporate from it.

Lawton, E. A.↗
NASA NTRS1986

Replaceable Transfer Tube for High-Pressure Cavities

Set of fittings allows fluid injected into inner chamber, passing through two cavities containing fluids at different high pressures. Injection tube readily replaced, and fittings provide tight seal between cavities after replacement. Tube and fittings made from off-the-shelf parts, and familiar to workers and relatively inexpensive.

Sorensen, D.↗
NASA NTRS1986

Supporting Structures for Flat Solar-Cell Arrays

Strong supporting structures for flat solar photovoltaic arrays built with such commonly available materials as wood and galvanized steel sheet. Structures resist expected static loads from snow and ice as well as dynamic loads from winds and even Earthquake vibrations. Supporting structure uses inexpensive materials. Parts prefabricated to minimize assembly work in field.

Wilson, A. H.↗
NASA NTRS1986

Generating Independent Preionizing Pulses for Lasers

Simple pulse-coupling winding on saturable reactor core lets core act as pulse transformer, passing preionizing pulse from winding to tapered transmission line, then to laser. Laser prepared for independent firing pulse, which follows preionizing pulse. Winding is simple, light in weight, low in bulk and power consumption, and inexpensive.

Pacala, T. J.↗