Search NASA⌕ Search

SEARCH · Search NASA

Results for “input”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Amplified spontaneous emission spectrum at the output of a diode amplifier saturated by an input monochromatic wave

Expressions for the amplitudes of amplified spontaneous emission waves in a diode amplifier near the frequency ω{sub 0} of a 'strong' input monochromatic wave have been derived in terms of a random function of a stationary Gaussian process. We have found expressions for the spectral density of the amplitudes and shown that, on the red side of the spectrum with respect to frequency ω{sub 0}, spontaneous emission waves obtain additional nonlinear gain, induced by the strong wave, whereas on the blue side of the spectrum an additional loss is induced. Such behaviour of the amplitudes of amplified waves agrees with previous results. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of the input radiation pulse characteristics on the parameters of a XeF(C – A) amplifier in a THL-100 laser system

We report the results of experimental and theoretical investigations on the influence of spatial and energy parameters of input radiation with a pulse duration of 50 ps on output characteristics of a XeF(C – A) amplifier in a visible-range, multi-terawatt THL-100 laser system. Dynamics of the energy density radial distribution for laser radiation passing through the amplifier is studied. Results of numerical simulation are presented for amplification of laser beams with Gaussian and super-Gaussian radial energy density distributions. It is shown that the laser energy of 3.2 J obtained experimentally is not the limiting value. According to calculations, the output energy of the amplifier with such mirror configuration may reach 4.1 J, which in the case of a pulse compressed down to 50 fs corresponds to the radiation power of 82 TW. (paper)

42 ENGINEERING↗

Dopaminergic inputs in the dentate gyrus direct the choice of memory encoding

Rewarding experiences are often well remembered, and such memory formation is known to be dependent on dopamine modulation of the neural substrates engaged in learning and memory; however, it is unknown how and where in the brain dopamine signals bias episodic memory toward preceding rather than subsequent events. Here we found that photostimulation of channelrhodopsin-2–expressing dopaminergic fibers in the dentate gyrus induced a long-term depression of cortical inputs, diminished theta oscillations, and impaired subsequent contextual learning. Computational modeling based on this dopamine modulation indicated an asymmetric association of events occurring before and after reward in memory tasks. In subsequent behavioral experiments, preexposure to a natural reward suppressed hippocampus-dependent memory formation, with an effective time window consistent with the duration of dopamine-induced changes of dentate activity. Altogether, our results suggest a mechanism by which dopamine enables the hippocampus to encode memory with reduced interference from subsequent experience.

59 BASIC BIOLOGICAL SCIENCES↗

KEPLER INPUT CATALOG: PHOTOMETRIC CALIBRATION AND STELLAR CLASSIFICATION

We describe the photometric calibration and stellar classification methods used by the Stellar Classification Project to produce the Kepler Input Catalog (KIC). The KIC is a catalog containing photometric and physical data for sources in the Kepler mission field of view; it is used by the mission to select optimal targets. Four of the visible-light (g, r, i, z) magnitudes used in the KIC are tied to Sloan Digital Sky Survey magnitudes; the fifth (D51) is an AB magnitude calibrated to be consistent with Castelli and Kurucz (CK) model atmosphere fluxes. We derived atmospheric extinction corrections from hourly observations of secondary standard fields within the Kepler field of view. For these filters and extinction estimates, repeatability of absolute photometry for stars brighter than magnitude 15 is typically 2%. We estimated stellar parameters {l_brace}T{sub eff}, log (g), log (Z), E{sub B-V}{r_brace} using Bayesian posterior probability maximization to match observed colors to CK stellar atmosphere models. We applied Bayesian priors describing the distribution of solar-neighborhood stars in the color-magnitude diagram, in log (Z), and in height above the galactic plane. Several comparisons with samples of stars classified by other means indicate that for 4500 K {<=}T{sub eff} {<=} 6500 K, our classifications are reliable within about {+-}200 K and 0.4 dex in log (g) for dwarfs, with somewhat larger log (g) uncertainties for giants. It is difficult to assess the reliability of our log (Z) estimates, but there is reason to suspect that it is poor, particularly at extreme T{sub eff}. Comparisons between the CK models and observed colors are generally satisfactory with some exceptions, notably for stars cooler than 4500 K. Of great importance for the Kepler mission, for T{sub eff} {<=} 5400 K, comparison with asteroseismic results shows that the distinction between main-sequence stars and giants is reliable with about 98% confidence. Larger errors in log (g) occur for warmer stars, for which our filter set provides inadequate gravity diagnostics. The KIC is available through the MAST data archive.

79 ASTRONOMY AND ASTROPHYSICS↗

A REVISED EFFECTIVE TEMPERATURE SCALE FOR THE KEPLER INPUT CATALOG

We present a catalog of revised effective temperatures for stars observed in long-cadence mode in the Kepler Input Catalog (KIC). We use Sloan Digital Sky Survey (SDSS) griz filters tied to the fundamental temperature scale. Polynomials for griz color-temperature relations are presented, along with correction terms for surface gravity effects, metallicity, and statistical corrections for binary companions or blending. We compare our temperature scale to the published infrared flux method (IRFM) scale for V{sub T}JK{sub s} in both open clusters and the Kepler fields. We find good agreement overall, with some deviations between (J - K{sub s} )-based temperatures from the IRFM and both SDSS filter and other diagnostic IRFM color-temperature relationships above 6000 K. For field dwarfs, we find a mean shift toward hotter temperatures relative to the KIC, of order 215 K, in the regime where the IRFM scale is well defined (4000 K to 6500 K). This change is of comparable magnitude in both color systems and in spectroscopy for stars with T{sub eff} below 6000 K. Systematic differences between temperature estimators appear for hotter stars, and we define corrections to put the SDSS temperatures on the IRFM scale for them. When the theoretical dependence on gravity is accounted for, we find a similar temperature scale offset between the fundamental and KIC scales for giants. We demonstrate that statistical corrections to color-based temperatures from binaries are significant. Typical errors, mostly from uncertainties in extinction, are of order 100 K. Implications for other applications of the KIC are discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Data-Consistent Inversion for Stochastic Input-to-Output Maps

Data-consistent inversion is a recently developed measure-theoretic framework for solving a stochastic inverse problem involving models of physical systems. The goal is to construct a probability measure on model inputs (i.e., parameters of interest) whose associated push-forward measure matches (i.e., is consistent with) a probability measure on the observable outputs of the model (i.e., quantities of interest). Previous implementations required the map from parameters of interest to quantities of interest to be deterministic. This work generalizes this framework for maps that are stochastic, i.e., contain uncertainties and variation not explainable by variations in uncertain parameters of interest. Generalizations of previous theorems of existence, uniqueness, and stability of the data-consistent solution are provided while new theoretical results address the stability of marginals on parameters of interest. A notable aspect of the algorithmic generalization is the ability to query the solution to generate independent identically distributed samples of the parameters of interest without requiring knowledge of the so-called stochastic parameters. This work therefore extends the applicability of the data-consistent inversion framework to a much wider class of problems. This includes those based on purely experimental and field data where only a subset of conditions are either controllable or can be documented between experiments while the underlying physics, measurement errors, and any additional covariates are either uncertain or not accounted for by the researcher. Finally, numerical examples demonstrate application of this approach to systems with stochastic sources of uncertainties embedded within the modeling of a system and a numerical diagnostic is summarized that is useful for determining if a key assumption is verified among competing choices of stochastic maps.

97 MATHEMATICS AND COMPUTING↗

Kinetic simulations of X-B and O-X-B mode conversion and its deterioration at high input power

Spherical tokamak plasmas are typically overdense and thus inaccessible to externally-injected microwaves in the electron cyclotron range. The electrostatic electron Bernstein wave (EBW), however, provides a method to access the plasma core for heating and diagnostic purposes. Understanding the details of the coupling process to electromagnetic waves is thus important both for the interpretation of microwave diagnostic data and for assessing the feasibility of EBW heating and current drive. While the coupling is reasonably well–understood in the linear regime, nonlinear physics arising from high input power has not been previously quantified. To tackle this problem, we have performed one- and two-dimensional fully kinetic particle-in-cell simulations of the two possible coupling mechanisms, namely X-B and O-X-B mode conversion. We find that the ion dynamics has a profound effect on the field structure in the nonlinear regime, as high amplitude short-scale oscillations of the longitudinal electric field are excited in the region below the high-density cut-off prior to the arrival of the EBW. We identify this effect as the instability of the X wave with respect to resonant scattering into an EBW and a lower-hybrid wave. Finally, we calculate the instability rate analytically and find this basic theory to be in reasonable agreement with our simulation results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Increased radiation due to non-coronal effects on DIII-D and MAST-U with varying input power

Through SOLPS-ITER simulations of DIII-D and MAST-U, an X-divertor (XD) on DIII-D and a super X-divertor (SXD) on MAST-U were shown to have increased carbon emissivity (P Rad /n e n I ) over corresponding standard divertors (SD) at similar degrees of partial detachment. The reasons behind the increased emissivity in the DIII-D XD and SXD are analyzed using a simple 0D transport model. From the transport model, it is seen that a major cause of the increased emissivity in the XD and SXD over the SDs is a shorter impurity confinement time. An additional cause (for the SXD) is an increase in the ratio of neutral hydrogen to electron density. The input power (P in ) was varied and the XD had a higher emissivity at the higher P in , unlike the SDs which had the emissivity decrease with increasing P in . A basic geometrical reason is given to explain both the benefits of the XD over the SD as well as the increase in the XD's emissivity with P in .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Multi-machine validation of plasma initiation modelling and prospects for future devices: Predicting plasma initiation using only hardware design and control room input data

This paper reports on the generic prediction capability of full electromagnetic plasma initiation modelling with DYON, which was carried out for the first time in fusion research by the joint modelling of the International Tokamak Physics Activity—Integrating Operation Scenario group. The following devices were included in the experiment database: VEST (spherical torus, copper coils, Stainless steel wall, R/a = 0.3 m/0.2 m, V v = 3.7 m 3 ), MAST-U (spherical torus, copper coils, C wall, R/a = 0.7 m/0.5 m, V v = 55 m 3 ), EAST (conventional tokamak, superconducting coils, metallic wall, R/a = 1.85 m/0.5 m, V v = 38 m 3 ), DIII-D (conventional tokamak, copper coils, C wall, R/a = 1.67 m/0.65 m, V v = 35 m 3 ), and KSTAR (conventional tokamak, superconducting coils, C wall, R/a = 1.8 m/0.5 m, V v = 55 m 3 ). Despite the different hardware features of the devices, the required operating spaces of the loop voltage induction and prefill gas pressure for inductive plasma initiation in each device were successfully reproduced by the predictive simulations with DYON using only the individual hardware design and the control room input data for each discharge. This successful validation across multiple machines demonstrates that the full electromagnetic DYON modelling can capture the essential physics of inductive plasma initiation. The simulation settings commonly employed for all modelling and the modifications necessary to account for the discrepancies between individual devices are reported. Predictions for ITER based on the multi-machine validation indicate that a wide range of prefill gas pressures exists for the Townsend breakdown and the plasma burn-through (0.01–1.5 mPa).

DYON↗

Design and optimization of the RF input-coupler for a low-frequency, split-coaxial RFQ

The Isotope Decay-At-Rest experiment (IsoDAR) is a proposed underground experiment which is expected to be a definitive search for sterile neutrinos. In order to be decisive within 5 years, high rates of neutrinos must be produced, by impinging a 10 mA continuous wave proton beam at 60 MeV on a high power target. Due to space restrictions, a compact cyclotron was chosen as an accelerator to produce this driver beam. To overcome space charge limitations during injection, H 2 + ions are accelerated and later stripped into protons by means of a carbon foil. IsoDAR uses an especially designed low-frequency (32.8 MHz) split-coaxial Radio-Frequency Quadrupole (RFQ) to effectively bunch H 2 + ions before injecting them into this cyclotron. The RFQ will be embedded vertically in the cyclotron yoke, facilitating a very compact design. This puts stringent limits on RFQ size, type, and accessibility. Here, we present the design and optimization of the low-frequency (32.8 MHz) RF input-coupler for the IsoDAR RFQ. The design is challenging due to the necessarily small diameter of the RFQ (28 cm) and the split-coaxial type, as well as limited access to the RFQ. We have determined the optimal position and shape for the coupler, leading to a low power consumption of < 6 kW for an inter-vane voltage of 22 kV. Finally, the highest calculated fields are safely below the Kilpatrick limit for this structure.

43 PARTICLE ACCELERATORS↗

VERIFICATION OF THE KEPLER INPUT CATALOG FROM ASTEROSEISMOLOGY OF SOLAR-TYPE STARS

We calculate precise stellar radii and surface gravities from the asteroseismic analysis of over 500 solar-type pulsating stars observed by the Kepler space telescope. These physical stellar properties are compared with those given in the Kepler Input Catalog (KIC), determined from ground-based multi-color photometry. For the stars in our sample, we find general agreement but we detect an average overestimation bias of 0.23 dex in the KIC determination of log (g) for stars with log (g){sub KIC} > 4.0 dex, and a resultant underestimation bias of up to 50% in the KIC radii estimates for stars with R{sub KIC} < 2 R{sub sun}. Part of the difference may arise from selection bias in the asteroseismic sample; nevertheless, this result implies there may be fewer stars characterized in the KIC with R {approx} 1 R{sub sun} than is suggested by the physical properties in the KIC. Furthermore, if the radius estimates are taken from the KIC for these affected stars and then used to calculate the size of transiting planets, a similar underestimation bias may be applied to the planetary radii.

79 ASTRONOMY AND ASTROPHYSICS↗

Quantitative phase reconstruction from input-output intensities using a shift-invariant linear imaging system

We formulate an iteration scheme for quantitative two-dimensional phase retrieval of complex scalar wave fields from input-output intensity profiles using a coherent rotationally symmetric shift-invariant linear optical imaging system. This method is a generalization of our previous method for quantitative single-image pure phase reconstruction using an imperfect shift-invariant linear imaging system. The method is somewhat analogous to the Gerchberg-Saxton iterative phase-retrieval algorithm, but typically converges much more rapidly. We have demonstrated the efficacy of the method using simulated data in the presence of noise.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Cavity quantum electro-optics. II. Input-output relations between traveling optical and microwave fields

In a previous paper [Phys. Rev. A 81, 063837 (2010)], I proposed a quantum model of the cavity electro-optic modulator, which can coherently couple an optical cavity mode to a microwave resonator mode and enable quantum operations on the two modes, including laser cooling of the microwave resonator, electro-optic entanglement, and backaction-evading optical measurement of a microwave quadrature. In this sequel, I focus on the quantum input-output relations between traveling optical and microwave fields coupled to the cavity electro-optic modulator. With red-sideband optical pumping, the relations are shown to resemble those of a beam splitter for the traveling fields, so that in the ideal case of zero parasitic loss and critical coupling, microwave photons can be coherently up converted to ''flying'' optical photons with unit efficiency, and vice versa. With blue-sideband pumping, the modulator acts as a nondegenerate parametric amplifier, which can generate two-mode squeezing and hybrid entangled photon pairs at optical and microwave frequencies. These fundamental operations provide a potential bridge between circuit quantum electrodynamics and quantum optics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Channel-capacity gain in entanglement-assisted communication protocols based exclusively on linear optics, single-photon inputs, and coincidence photon counting

Entanglement can effectively increase communication channel capacity as evidenced by dense coding that predicts a capacity gain of 1 bit when compared to entanglement-free protocols. However, dense coding relies on Bell states and when implemented using photons the capacity gain is bounded by 0.585 bits due to one's inability to discriminate between the four optically encoded Bell states. In this research we study the following question: Are there alternative entanglement-assisted protocols that rely only on linear optics, coincidence photon counting, and separable single-photon input states and at the same time provide a greater capacity gain than 0.585 bits? In this study, we show that besides the Bell states there is a class of bipartite four-mode two-photon entangled states that facilitate an increase in channel capacity. We also discuss how the proposed scheme can be generalized to the case of two-photon N-mode entangled states for N=6,8.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Covariant density functional theory input for r-process simulations in actinides and superheavy nuclei: The ground state and fission properties

A systematic investigation of the ground-state and fission properties of even-even actinides and superheavy nuclei with Z = 90–120 from the two-proton up to two-neutron drip lines with proper assessment of systematic theoretical uncertainties has been performed for the first time in the framework of covariant density functional theory (CDFT). Furthermore, these results provide a necessary theoretical input for the r-process modeling in heavy nuclei and, in particular, for the study of fission cycling. Four state-of-the-art globally tested covariant energy density functionals (CEDFs), namely, DD-PC1, DD-ME2, NL3*, and PC-PK1, representing the major classes of the CDFT models are employed in the present paper. Ground-state deformations, binding energies, two-neutron separation energies, α-decay Q α values and half-lives, and the heights of fission barriers have been calculated for all these nuclei. Theoretical uncertainties in these physical observables and their evolution as a function of proton and neutron numbers have been quantified and their major sources have been identified. Spherical shell closures at Z = 120, N = 184, and N = 258 and the structure of the single-particle (especially, high-j) states in their vicinities as well as nuclear matter properties of employed CEDFs are two major factors contributing to theoretical uncertainties. However, different physical observables are affected in a different way by these two factors. For example, theoretical uncertainties in calculated ground-state deformations are affected mostly by the former factor, while theoretical uncertainties in fission barriers depend on both of these factors.

190 ≤ A ≤ 219↗

Towards a prediction of fission cross sections on the basis of microscopic nuclear inputs

Recently, a sound description of some of the basic nuclear ingredients required in the calculation of fission cross sections has been obtained. These concern in particular fission barriers within the Hartree-Fock-Bogoliubov (HFB) method and nuclear level densities at the fission saddle points within the combinatorial model. Both ingredients are determined coherently, the nuclear level densities being estimated on the basis of the single-particle scheme and pairing strength of the same mean field model that was used to determine the fission saddle points. The aim of the present study is to evaluate the quality of such inputs in the calculation of fission cross sections. Although the barrier height can still not be predicted with an accuracy better than about 700 keV, the use of the full HFB fission path and the corresponding WKB calculation of the probability to penetrate the fission barrier clearly provides a better way to estimate fission cross section in comparison with highly parametrized phenomenological models, when no experimental data is available. It is shown that a satisfactory estimate of the fission cross section for nonenergy applications can be achieved with a global renormalization of the barrier height and the microscopic nuclear level densities at the fission saddle points. Good agreement with experimental data can be obtained if both the fission barrier heights and level densities are independently renormalized. The resulting barrier heights required to reproduce experimental cross sections are found to be smaller by a few hundred keV with respect to previous analyses.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Solution to Faddeev equations with two-body experimental amplitudes as input and application to J{sup P}=1/2{sup +}, S=0 baryon resonances

We solve the Faddeev equations for the two meson-one baryon system {pi}{pi}N and coupled channels using the experimental two-body t matrices for the {pi}N interaction as input and unitary chiral dynamics to describe the interaction between the rest of coupled channels. In addition to the N*(1710) obtained before with the {pi}{pi}N channel, we obtain, for J{sup {pi}}=1/2{sup +} and total isospin of the three-body system I=1/2, a resonance peak whose mass is around 2080 MeV and width 54 MeV, while for I=3/2 we find a peak around 2126 with 42 MeV of width. These two resonances can be identified with the N*(2100) and the {delta}(1910), respectively. We obtain another peak in the isospin 1/2 configuration, around 1920 MeV that can be interpreted as a resonance in the Na{sub 0}(980) and Nf{sub 0}(980) systems.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗