Search NASA⌕ Search

SEARCH · Search NASA

Results for “interrupt”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Nonlinear theory of drift-cyclotron kinetics and the possible breakdown of gyro-kinetics

A nonlinear theory of drift-cyclotron kinetics (termed cyclo-kinetics here) is formulated to test the breakdown of the gyro-kinetic approximations. Six dimensional cyclo-kinetics can be regarded as an extension of five dimensional gyro-kinetics to include high-frequency cyclotron waves, which can interrupt the low-frequency gyro-averaging in the (sixth velocity grid) gyro-phase angle. Nonlinear cyclo-kinetics has no limit on the amplitude of the perturbations. Formally, there is no gyro-averaging when all cyclotron (gyro-phase angle) harmonics of the perturbed distribution function (delta-f) are retained. Retaining only the (low frequency) zeroth cyclotron harmonic in cyclo-kinetics recovers both linear and nonlinear gyro-kinetics. Simple recipes are given for converting continuum nonlinear delta-f gyro-kinetic transport simulation codes to cyclo-kinetics codes by retaining (at least some) higher cyclotron harmonics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Influence of adsorption kinetics on stress evolution in magnetron-sputtered SiO{sub 2} and SiN{sub x} films

An in situ multi-beam optical sensor system was used to monitor and analyze the force per unit width (F/w) and stress evolution during several stages in magnetron-sputtered SiO{sub 2} and SiN{sub x} films. Stress was observed to relieve quickly after interrupt and recover rapidly after growth resumption in both films. Stress relief was reversible in SiO{sub 2} film but partial reversible in SiN{sub x} film. Stress relief results from both physical and chemical adsorption. Stress recovery is caused by physical desorption. And chemical adsorption results in an irreversible stress relief component. No chemical adsorption occurs in SiO{sub 2} film because of the stable chemical structure. The relationship between adsorption kinetics and films' mechanical behavior is revealed.

36 MATERIALS SCIENCE↗

X-ray irradiation induced changes in electron transport in stabilized a-Se photoconductors

We have examined the effect of high-dose x-ray irradiation on electron transport in stabilized amorphous selenium (a-Se) x-ray photoconductive films (of the type used in x-ray image detectors) by measuring the electron lifetime τ{sub e} through interrupted-field time-of-flight experiments. X-ray induced effects have been examined through two types of experiments. In recovery experiments, the a-Se was preirradiated with and without an applied field (5 V/μm) during irradiation with sufficient dose (typically ∼20 Gy at 21 °C) to significantly reduce the electron lifetime by ∼50%, and then the recovery of the lifetime was monitored as a function of time at three different temperatures, 10 °C, 21 °C, and 35 °C. The lifetime recovery kinetics was exponential with a relaxation time τ{sub r} that is thermally activated with an activation energy of 1.66 eV. τ{sub r} is a few hours at 21 °C and only a few minutes at 35 °C. In experiments examining the irradiation induced effects, the a-Se film was repeatedly exposed to x-ray radiation and the changes in the drift mobility and lifetime were monitored as a function of accumulated dose D. There was no observable change in the drift mobility. At 21 °C, the concentration of x-ray induced deep traps (or capture centers), N{sub d}, increases linearly with D (N{sub d} ∼ D) whereas at 35 °C, the recovery process prevents a linear increase in N{sub d} with D, and N{sub d} saturates. In all cases, even under high dose irradiation (∼50 Gy), the lifetime was recoverable to its original equilibrium (pre-exposure) value within a few relaxation times.

36 MATERIALS SCIENCE↗

Structural characterization of ion-vapor deposited hydrogenated amorphous carbon coatings by solid state {sup 13}C nuclear magnetic resonance

In the present study, unique structural heterogeneity was observed in ion-vapor deposited a-C:H coatings by performing {sup 13}C MAS and {sup 1}H-{sup 13}C CPMAS experiments on solid state nuclear magnetic resonance devices. Two distinct types of sp{sup 2} C clusters were discovered: one of them denoted as sp{sup 2} C′ in content of 3–12 at. % was non-protonated specifically localized in hydrogen-absent regions, while the other dominant one denoted as sp{sup 2} C″ was hydrogenated or at least proximate to proton spins. On basis of the notably analogous variation of sp{sup 2} C′ content and Raman parameters as function of substrate bias voltage in the whole range of 0.5 kV–3.5 kV, a model of nano-clustering configuration was proposed that the sp{sup 2} C′ clusters were embedded between sp{sup 2} C″ clusters and amorphous sp{sup 3} C matrix as trapped interfaces or boundaries where the sp{sup 2} carbon bonds were highly distorted. Continuous increase of bias voltage would promote the nano-clustering and re-ordering of dominant sp{sup 2} C″ clusters, thus results in a marked decrease of interspace and a change of the content of sp{sup 2} C′ clusters. Further investigation on the {sup 13}C magnetization recovery showed typical stretched-exponential approximation due to the prominent presence of paramagnetic centers, and the stretched power α varied within 0.6–0.9 from distinct types of sp{sup 2} C clusters. Differently, the magnetization recovery of {sup 1}H showed better bi-exponential approximation with long and short T{sub 1}(H) fluctuated within 40–60 ms and 0.1–0.3 ms approximately in content of 80% ± 5% and 20% ± 5%, respectively, varying with various bias voltages. Meanwhile, the interrupted {sup 13}C saturation recovery with an interval of short T{sub 1}(H) showed that most of quick-relaxing protons were localized in sp{sup 2} C″ clusters. Such a short T{sub 1}(H) was only possibly resulted from a relaxation mechanism associated with electron-nuclear dipolar interaction or spinning diffusion, and its partial distribution in sp{sup 2} C″ clusters may imply more complex configurations of unpaired electrons in studied a-C:H coatings.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stability of the steady three-dimensional lid-driven flow in a cube and the supercritical flow dynamics

The stability of the steady flow in a lid-driven cube is investigated by a collocation method making use of asymptotic solutions for the singular edges of the cavity up- and downstream of the moving wall. Owing to the rapid convergence of the method high-accuracy critical data are obtained. To determine the critical point subcritical growth rates of small perturbations are extrapolated to zero. We find the bifurcation to be of Hopf-type and slightly subcritical. Above the critical point, the oscillatory flow is symmetric with respect to the symmetric midplane of the cavity and characterized by nearly streamwise vortices in the boundary layer on the wall upstream of the moving wall. The oscillation amplitude grows slowly and seems to saturate. On a long time scale, however, the constant-amplitude oscillations are unstable. The periodic oscillations are interrupted by short bursts during which the oscillation amplitude grows substantially and the spatial structure of the oscillating streamwise vortices changes. Towards the end of each burst the mirror symmetry of the oscillatory flow is lost, the flow returns to the vicinity of the unstable steady state and the growth of symmetric oscillations starts again leading to an intermittent chaotic flow.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Two dimensional electron transport in modulation-doped In{sub 0.53}Ga{sub 0.47}As/AlAs{sub 0.56}Sb{sub 0.44} ultrathin quantum wells

We have investigated the growth and electron transport in In{sub 0.53}Ga{sub 0.47}As/AlAs{sub 0.56}Sb{sub 0.44} two dimensional electron gases (2DEG) and compared their properties with In{sub 0.53}Ga{sub 0.47}As/In{sub 0.52}Al{sub 0.48}As 2DEGs. For 10 nm thick InGaAs wells, the electron mobility of InGaAs/AlAsSb 2DEGs is comparable to that of InGaAs/InAlAs 2DEGs. Upon thinning the wells to 3 nm, the 2DEG mobility is degraded quickly and stronger interface roughness scattering is observed for InGaAs/AlAsSb heterointerfaces than for InGaAs/InAlAs heterointerfaces. Changing the group-V exposure between As and Sb during growth interruptions at the InGaAs/AlAsSb interfaces did not significantly change the 2DEG mobility. With the insertion of a two monolayer InAlAs at the InGaAs/AlAsSb interfaces, the interface roughness scattering is reduced and the mobility greatly increased. The room temperature 2DEG mobility shows 66% improvement from 1.63 × 10{sup 3} cm{sup 2}/V·s to 2.71 × 10{sup 3} cm{sup 2}/V·s for a 3 nm InGaAs well.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Indirect and direct optical transitions in In{sub 0.5}Ga{sub 0.5}As/GaP quantum dots

We present a study of self-assembled In{sub 0.5}Ga{sub 0.5}As quantum dots on GaP(001) surfaces linking growth parameters with structural, optical, and electronic properties. Quantum dot densities from 5.0 × 10{sup 7} cm{sup −2} to 1.5 × 10{sup 11} cm{sup −2} are achieved. A ripening process during a growth interruption after In{sub 0.5}Ga{sub 0.5}As deposition is used to vary the quantum dot size. The main focus of this work lies on the nature of optical transitions which can be switched from low-efficient indirect to high-efficient direct ones through improved strain relief of the quantum dots by different cap layers.

36 MATERIALS SCIENCE↗

Packaging - Materials review

Nowadays, a large number of different electrochemical energy storage systems are known. In the last two decades the development was strongly driven by a continuously growing market of portable electronic devices (e.g. cellular phones, lap top computers, camcorders, cameras, tools). Current intensive efforts are under way to develop systems for automotive industry within the framework of electrically propelled mobility (e.g. hybrid electric vehicles, plug-in hybrid electric vehicles, full electric vehicles) and also for the energy storage market (e.g. electrical grid stability, renewable energies). Besides the different systems (cell chemistries), electrochemical cells and batteries were developed and are offered in many shapes, sizes and designs, in order to meet performance and design requirements of the widespread applications. Proper packaging is thereby one important technological step for designing optimum, reliable and safe batteries for operation. In this contribution, current packaging approaches of cells and batteries together with the corresponding materials are discussed. The focus is laid on rechargeable systems for industrial applications (i.e. alkaline systems, lithium-ion, lead-acid). In principle, four different cell types (shapes) can be identified - button, cylindrical, prismatic and pouch. Cell size can be either in accordance with international (e.g. International Electrotechnical Commission, IEC) or other standards or can meet application-specific dimensions. Since cell housing or container, terminals and, if necessary, safety installations as inactive (non-reactive) materials reduce energy density of the battery, the development of low-weight packages is a challenging task. In addition to that, other requirements have to be fulfilled: mechanical stability and durability, sealing (e.g. high permeation barrier against humidity for lithium-ion technology), high packing efficiency, possible installation of safety devices (current interrupt device, valve, etc.), chemical inertness, cost issues, and others. Finally, proper cell design has to be considered for effective thermal management (i.e. cooling and heating) of battery packs.

25 ENERGY STORAGE↗

Fatigue damage evaluation of austenitic stainless steel using nonlinear ultrasonic waves in low cycle regime

The interrupted low cycle fatigue test of austenitic stainless steel was conducted and the dislocation structure and fatigue damage was evaluated subsequently by using both transmission electron microscope and nonlinear ultrasonic wave techniques. A “mountain shape” correlation between the nonlinear acoustic parameter and the fatigue life fraction was achieved. This was ascribed to the generation and evolution of planar dislocation structure and nonplanar dislocation structure such as veins, walls, and cells. The “mountain shape” correlation was interpreted successfully by the combined contribution of dislocation monopole and dipole with an internal-stress dependent term of acoustic nonlinearity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Breakdown assisted by a novel electron drift injection in the J-TEXT tokamak

A novel electron drift injection (EDI) system aiming to improve breakdown behavior has been designed and constructed on the Joint Texas EXperiment Tokamak Tokamak. Electrons emitted by the system undergo the E×B drift, ∇B drift and curvature drift in sequence in order to traverse the confining magnetic field. A local electrostatic well, generated by a concave-shaped plate biased more negative than the cathode, is introduced to interrupt the emitted electrons moving along the magnetic field line (in the parallel direction) in an attempt to bring an enhancement of the injection efficiency and depth. A series of experiments have demonstrated the feasibility of this method, and a penetration distance deeper than 9.5 cm is achieved. Notable breakdown improvements, including the reduction of breakdown delay and average loop voltage, are observed for discharges assisted by EDI. The lower limit of successfully ionized pressure is expanded.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Dependence of enhanced asymmetry-induced transport on collision frequency

A single-particle code with collisional effects is used to study how asymmetry-induced radial transport in a non-neutral plasma depends on collision frequency. For asymmetries of the form ϕ{sub 1}(r) cos(kz) cos(ωt−lθ), two sources for the transport have been identified: resonant particles and axially trapped particles. The simulation shows that this latter type, which occurs near the radius where ω matches the azimuthal rotation frequency ω{sub R}, is usually dominant at low collision frequency ν but becomes negligible at higher ν. This behavior can be understood by noting that axially trapped particles have a lower trapping frequency than resonant particles. In the low ν (banana) regime, the radial oscillations have amplitude Δr ≈ v{sub r}/ω{sub T}, so axially trapped particles dominate, and the transport may even exceed the resonant particle plateau regime level. As ν increases, collisions start to interrupt the slower axially trapped particle oscillations, while the resonant particles are still in the banana regime, so the axially trapped particle contribution to the transport decreases. At the largest ν values, axially trapped particle transport is negligible and the observed diffusion coefficient matches that given by plateau regime resonant particle theory. Heuristic models based on these considerations give reasonable agreement with the observed scaling laws for the value of the collision frequency where axially trapped particle transport starts to decrease and for the enhancement of the diffusion coefficient produced by axially trapped particles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Note: Reliable low-vibration piezo-mechanical shutter

We present a mechanical shutter based on a bending piezo-actuator. The shutter features an active aperture of about 2 mm, allowing for full extinction and lossless transmission of a beam. Acoustic noise and mechanical vibrations produced are very low and the shutter is outstandingly long-lived; a test device has undergone 20 × 10{sup 6} cycles without breaking. A reflector makes the shutter capable of reliably interrupting a beam with at least 2 W of cw power at 780 nm. The shutter is well suited to create pulses as short as 16 ms, while pulse lengths down to 1 ms are possible. The rise and fall times are approximately 120 µs, with a delay of 2 ms. Jitter stays below 10 µs, while long-term drifts stay well below 500 µs.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Local structure and polarization resistance of Ce doped SrMnO{sub 3} using extended x-ray fine structure analysis

Changes to the local structure of Sr and Mn atoms in Sr{sub 1−x}Ce{sub x}MnO{sub 3} (SCM) according to increasing Ce content and the effect of the structural change on the polarization resistance of SCM were investigated. The reduction of manganese was confirmed by the absorption edge shift of the Mn K-edge toward lower energies. The noise of oscillation in extended X-ray absorption fine structure k{sup 3}χ data at Mn K-edge reveals the distortion of the local structure of Mn atoms, and the peak that indicates the bonding length of Mn-O, Sr/Ce, and -Mn decreased with the addition of Ce content in Fourier transformations of the Mn K-edge. The distortion of the local structure at Mn atoms was affected by the reduced manganese ions having larger ionic radii than Mn{sup 4+}. Meanwhile, few distortions of local atomic structures of Sr atoms occurred, and the average nearest neighboring distances of Sr-O and Sr-Mn are ∼2.13 Å and ∼2.95 Å, respectively. The average bonding lengths of the Ce-O and Ce-Mn increased because the ionic radius of substituted Ce ion with 12 coordination number is smaller than that of Sr ion, which leads the reduction of Mn ions and the distortion of local structure at the substituted A-site. Therefore, we reasoned that the distortion of the local atomic structure at Mn atoms in MnO{sub 6} and Ce atoms in A-site is one of the causes for interrupting oxygen ion transfers as a geometric factor, which results in an increase in the polarization resistance of SCM within the Ce composition range from 10 mol. % to 30 mol. %.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Design and construction of a research atomic layer deposition system for in situ infrared and electron spectroscopies

A description is given of an ultra-high vacuum surface-analysis chamber that incorporates an internal cell for performing atomic layer deposition at a pressure of up to ∼1 Torr. The apparatus permits the growth process to be interrupted in stages during which data can be obtained using infrared and x-ray photoemission spectroscopies together with other electron-based techniques. Demonstration results are given for the adsorption of H{sub 2}O on Si (100) at a pressure of ∼0.3 Torr. The system described is generally applicable in the study of any surface reaction under non-high-vacuum conditions in which there is a need for both infrared and electron spectroscopies.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Grain size engineering for ferroelectric Hf{sub 0.5}Zr{sub 0.5}O{sub 2} films by an insertion of Al{sub 2}O{sub 3} interlayer

The degradation of ferroelectric (FE) properties of atomic layer deposited Hf{sub 0.5}Zr{sub 0.5}O{sub 2} films with increasing thickness was mitigated by inserting 1 nm-thick Al{sub 2}O{sub 3} interlayer at middle position of the thickness of the FE film. The large P{sub r} of 10 μC/cm{sup 2}, which is 11 times larger than that of single layer Hf{sub 0.5}Zr{sub 0.5}O{sub 2} film with equivalent thickness, was achieved from the films as thick as 40 nm. The Al{sub 2}O{sub 3} interlayer could interrupt the continual growth of Hf{sub 0.5}Zr{sub 0.5}O{sub 2} films, and the resulting decrease of grain size prevented the formation of non-ferroelectric monoclinic phase. The Al{sub 2}O{sub 3} interlayer also largely decreased the leakage current of the Hf{sub 0.5}Zr{sub 0.5}O{sub 2} films.

36 MATERIALS SCIENCE↗

Electron transfer activation of a second water channel for proton transport in [FeFe]-hydrogenase

Hydrogenase enzymes are important because they can reversibly catalyze the production of molecular hydrogen. Proton transport mechanisms have been previously studied in residue pathways that lead to the active site of the enzyme via residues Cys299 and Ser319. The importance of this pathway and these residues has been previously exhibited through site-specific mutations, which were shown to interrupt the enzyme activity. It has been shown recently that a separate water channel (WC2) is coupled with electron transport to the active site of the [FeFe]-hydrogenase. The water-mediated proton transport mechanisms of the enzyme in different electronic states have been studied using the multistate empirical valence bond reactive molecular dynamics method, in order to understand any role WC2 may have in facilitating the residue pathway in bringing an additional proton to the enzyme active site. In a single electronic state A{sup 2−}, a water wire was formed through which protons can be transported with a low free energy barrier. The remaining electronic states were shown, however, to be highly unfavorable to proton transport in WC2. A double amino acid substitution is predicted to obstruct proton transport in electronic state A{sup 2-} by closing a cavity that could otherwise fill with water near the proximal Fe of the active site.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Three axis electronic flight motion simulator real time control system design and implementation

A three axis electronic flight motion simulator is reported in this paper including the modelling, the controller design as well as the hardware implementation. This flight motion simulator could be used for inertial navigation test and high precision inertial navigation system with good dynamic and static performances. A real time control system is designed, several control system implementation problems were solved including time unification with parallel port interrupt, high speed finding-zero method of rotary inductosyn, zero-crossing management with continuous rotary, etc. Tests were carried out to show the effectiveness of the proposed real time control system.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Optical and structural characteristics of high indium content InGaN/GaN multi-quantum wells with varying GaN cap layer thickness

The optical and structural properties of InGaN/GaN multi-quantum wells (MQWs) with different thicknesses of low temperature grown GaN cap layers are investigated. It is found that the MQW emission energy red-shifts and the peak intensity decreases with increasing GaN cap layer thickness, which may be partly caused by increased floating indium atoms accumulated at quantum well (QW) surface. They will result in the increased interface roughness, higher defect density, and even lead to a thermal degradation of QW layers. An extra growth interruption introduced before the growth of GaN cap layer can help with evaporating the floating indium atoms, and therefore is an effective method to improve the optical properties of high indium content InGaN/GaN MQWs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗