Search NASA⌕ Search

SEARCH · Search NASA

Results for “model base engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

Dynamic Ground Effect for a Cranked Arrow Wing Airplane

Flight-determined ground effect characteristics for an F-16XL airplane are presented and correlated with wind tunnel predictions and similar flight results from other aircraft. Maneuvers were conducted at a variety of flightpath angles. Conventional ground effect flight test methods were used, with the exception that space positioning data were obtained using the differential global positioning system (DGPS). Accuracy of the DGPS was similar to that of optical tracking methods, but it was operationally more attractive. The dynamic flight determined lift and drag coefficient increments were measurably lower than steady-state wind-tunnel predictions. This relationship is consistent with the results of other aircraft for which similar data are available. Trends in the flight measured lift increments caused by ground effect as a function of flightpath angle were evident but weakly correlated. An engineering model of dynamic ground effect was developed based on linear aerodynamic theory and super-positioning of flows. This model was applied to the F-16XL data set and to previously published data for an F-15 airplane. In both cases, the model provided an engineering estimate of the ratio between the steady-state and dynamic data sets.

Curry, Robert E.↗
NASA NTRS2011

The Challenge of Configuring Model-Based Space Mission Planners

Mission planning is central to space mission operations, and has benefited from advances in model-based planning software. Constraints arise from many sources, including simulators and engineering specification documents, and ensuring that constraints are correctly represented in the planner is a challenge. As mission constraints evolve, planning domain modelers need help with modeling constraints efficiently using the available source data, catching errors quickly, and correcting the model. This paper describes the current state of the practice in designing model-based mission planning tools, the challenges facing model developers, and a proposed Interactive Model Development Environment (IMDE) to configure mission planning systems. We describe current and future technology developments that can be integrated into an IMDE.

model-based systems↗
DOE OSTI2024

ExaDigiT/RAPS

ExaDigiT is a framework for developing comprehensive digital twins of liquid-cooled supercomputers, which has three main modules: (1) a python-based Resource Allocator and Power Simulator (RAPS), (2) a Modelica-based Thermo-Fluidic cooling model, and (3) a C++-based augmented reality model built on Unreal Engine 5. RAPS either simulates workloads or replays historical workloads from system telemetry, and is able to predict dynamic energy consumption, as well as interact with the cooling model to predict cooling system behavior. Such a tool can be used together with reinforcement learning algorithms to provide an end-to-end optimization tool for data centers.

Brewer, Wesley [Oak Ridge National Laboratory (ORN↗
NASA NTRS1986

Development of the 15 meter diameter hoop column antenna

The building of a deployable 15-meter engineering model of the 100 meter antenna based on the point-design of an earlier task of this contract, complete with an RF-capable surface is described. The 15 meter diameter was selected so that the model could be tested in existing manufacturing, near-field RF, thermal vacuum, and structural dynamics facilities. The antenna was designed with four offset paraboloidal reflector surfaces with a focal length of 366.85 in and a primary surface accuracy goal of .069 in rms. Surface adjustment capability was provided by manually resetting the length of 96 surface control cords which emanated from the lower column extremity. A detailed description of the 15-meter Hoop/Column Antenna, major subassemblies, and a history of its fabrication, assembly, deployment testing, and verification measurements are given. The deviation for one aperture surface (except the outboard extremity) was measured after adjustments in follow-on tests at the Martin Marietta Near-field Facility to be .061 in; thus the primary surface goal was achieved.

Source record↗
NASA NTRS1994

A new stochastic systems approach to structural integrity

This paper develops improved stochastic models for the description of a large variety of fatigue crack growth phenomena that occur in components of considerable importance to the functionality and reliability of complex engineering structures. In essence, the models are based on the McGill-Markov and Closure-Lognormal stochastic processes. Not only do these models have the capability of predicting the statistical dispersion of crack growth rates, they also, by incorporating the concept of crack closure, have the capability of transferring stochastic crack growth properties measured under ideal laboratory conditions to situations of industrial significance, such as those occurring under adverse loading and/or environmental conditions. The primary data required in order to be in a position to estimate the pertinent parameters of these stochastic models are obtained from a statistically significant number of replicate tests. In this paper, both the theory and the experimental technique are illustrated using a Ti-6Al-4V alloy. Finally, important structural integrity, reliability, availability and maintainability concepts are developed and illustrated.

Provan, James W.↗
NASA NTRS1995

Performance seeking control (PSC) for the F-15 highly integrated digital electronic control (HIDEC) aircraft

The performance seeking control algorithm optimizes total propulsion system performance. This adaptive, model-based optimization algorithm has been successfully flight demonstrated on two engines with differing levels of degradation. Models of the engine, nozzle, and inlet produce reliable, accurate estimates of engine performance. But, because of an observability problem, component levels of degradation cannot be accurately determined. Depending on engine-specific operating characteristics PSC achieves various levels performance improvement. For example, engines with more deterioration typically operate at higher turbine temperatures than less deteriorated engines. Thus when the PSC maximum thrust mode is applied, for example, there will be less temperature margin available to be traded for increasing thrust.

Orme, John S.↗
NASA NTRSDate not supplied

Design, Formalization, and Verification of Decision Making for Intelligent Systems

The development of autonomous systems requires a rigorous process that can guarantee a system’s reliability in critical applications. At its core, an autonomous system bases its behavior on a well-defined decision making system. In this paper, we present a methodological basis for the design, formalization and formal verification of Decision Making systems for autonomous agents. The approach is generally applicable to operational objectives that can be functionally decomposed and subsequently represented as Hierarchical Finite State Machines. As a case study, we present the application of this method to implement a Decision Making model in Simulink. Furthermore, we present how we use NASA’s FRET tool to write requirements in structured natural language and generate formal specifications that can be automatically digested by NASA’s CoCoSim tool. Finally, we present how, by leveraging CoCoSim, we perform formal verification against the Simulink model and present analysis results.

Model-based development↗
NASA NTRSDate not supplied

Design, Formalization, and Verification of Decision Making for Intelligent Systems

The development of autonomous systems requires a rigorous process that can guarantee a system’s reliability in critical applications. At its core, an autonomous system bases its behavior on a well-defined decision making system. In this paper, we present a methodological basis for the design, formalization and formal verification of Decision Making systems for autonomous agents. The approach is generally applicable to operational objectives that can be functionally decomposed and subsequently represented as Hierarchical Finite State Machines. As a case study, we present the application of this method to implement a Decision Making model in Simulink. Furthermore, we present how we use NASA’s FRET tool to write requirements in structured natural language and generate formal specifications that can be automatically digested by NASA’s CoCoSim tool. Finally, we present how, by leveraging CoCoSim, we perform formal verification against the Simulink model and present analysis results.

Model-based development↗
NASA NTRS2024

Uranus Global Reference Atmospheric Model (Uranus-GRAM) 2024: User Guide

Engineers and mission planners designing vehicles that pass through Uranus’ atmosphere require an atmospheric model that calculates the mean values and variations of atmospheric properties. The Uranus Global Reference Atmospheric Model(Uranus-GRAM)is an engineering- oriented model that provides this information based on data from Voyager observations. Uranus- GRAM is designed to offer mission planners the flexibility to select input parameters such as time, latitude, and longitude. Uranus-GRAM outputs atmospheric constituent data and mean values for atmospheric density, temperature, pressure, and zonal wind along a user defined path. Uranus-GRAM also provides dispersions of density and zonal wind. Uranus-GRAM is one option in the GRAM Suite that shares a common software core with the other planetary GRAMs while maintaining Uranus specific models. Additionally, documentation, including this User Guide, a Programmer’s Manual, and trajectory code interfaces has been made available with the software release. This Technical Memorandum summarizes the atmospheric data model in Uranus-GRAM and provides a guide for the user to obtain, set up, and run the code in various configurations. Section 2 describes the input atmospheric data files and how they are used in Uranus-GRAM. Section 3 explains the process to obtain the Uranus-GRAM code, the data files, and how to set up and run the program. Appendices A through E provide additional details regarding the Uranus-GRAM input and output files. Appendix F provides a history of Uranus-GRAM revisions.

atmospheric models↗
NASA NTRS1994

Model-based software process improvement

The activities of a field test site for the Software Engineering Institute's software process definition project are discussed. Products tested included the improvement model itself, descriptive modeling techniques, the CMM level 2 framework document, and the use of process definition guidelines and templates. The software process improvement model represents a five stage cyclic approach for organizational process improvement. The cycles consist of the initiating, diagnosing, establishing, acting, and leveraging phases.

Zettervall, Brenda T.↗
NASA NTRS2012

Intelligent Systems Approach for Automated Identification of Individual Control Behavior of a Human Operator

Results have been obtained using conventional techniques to model the generic human operator?s control behavior, however little research has been done to identify an individual based on control behavior. The hypothesis investigated is that different operators exhibit different control behavior when performing a given control task. Two enhancements to existing human operator models, which allow personalization of the modeled control behavior, are presented. One enhancement accounts for the testing control signals, which are introduced by an operator for more accurate control of the system and/or to adjust the control strategy. This uses the Artificial Neural Network which can be fine-tuned to model the testing control. Another enhancement takes the form of an equiripple filter which conditions the control system power spectrum. A novel automated parameter identification technique was developed to facilitate the identification process of the parameters of the selected models. This utilizes a Genetic Algorithm based optimization engine called the Bit-Climbing Algorithm. Enhancements were validated using experimental data obtained from three different sources: the Manual Control Laboratory software experiments, Unmanned Aerial Vehicle simulation, and NASA Langley Research Center Visual Motion Simulator studies. This manuscript also addresses applying human operator models to evaluate the effectiveness of motion feedback when simulating actual pilot control behavior in a flight simulator.

Zaychik, Kirill B.↗
NASA NTRSDate not supplied

Scoping of an Air Supply Configuration for AFC on a Commercial Transport Airplane High Lift System

A scoping study is being conducted on the air supply fora microjet-based active flow control (AFC) system on a twin-turbofan commercial transport airplane. Microjets provide circulation control using small surface-normal pneumatic jets located near the trailing edge of a lifting surface such as a wing or flap. When located on the pressure side of the lifting surface they increase the lift, and when located on the suction side they decrease lift. In this study, microjets are considered for installation in the flaps of the high-lift version of the Common ResearchModel (CRM-HL). Two different architectures to supply the air for the microjets are considered: (1) bleed air from the airplane’s auxiliary power unit (APU) plus ram air, and (2) engine fan bleed air plus ram air. A model based on the 1D compressible flow equations is applied to analyze the air supply system architectures and predict the microjet flow rate with the resulting airplane performance changes based on Reynolds-averaged Navier-Stokes modeling of microjets on the CRM-HL. The results of this scoping study are encouraging in that pressurized air from the APU or the engine fan can be used to entrain ram air and thereby increase the AFC mass flow rate to achieve effective lift control and airplane performance enhancement during takeoff and landing.

AATT↗
NASA NTRS2009

Spreadsheets in Team X: Preserving Order in an Inherently Chaotic Environment

JPL is NASA's prime center for deep space missions. In response to the need to reduce the cost and time to complete early concept studies and proposals JPL created the first concurrent engineering team in the aerospace industry: Team X. Started in 1995, Team X has carried out over 800 studies, dramatically reducing the time and cost involved, and has been the model for other concurrent engineering teams both within NASA and throughout the larger aerospace community. Since its inception, the software backbone of this highly successful design team - engaged in examining some of NASA's cutting edge concepts - has been the unassuming spreadsheet. Over the years the Team X spreadsheet-based tools have evolved from simple standalone engineering models into a networked spreadsheet intensive system with real time parameter updating. Recent new capabilities include stochastic cost estimation and a graphical drag and drop block diagram that automatically populates the related spreadsheet parameters of cost, mass and power. This paper describes how the spreadsheet functions within Team X: its history, architecture, current capabilities, enabling strengths and persistent weaknesses. In addition, the verification methods and institutional oversight that have evolved as the Team X products became increasingly critical to Laboratory success are also discussed.

concurrent engineering↗
DOE OSTI2024

Optimizing Batch Crystallization with Model-based Design of Experiments

Adaptive and self-optimizing intelligent systems such as digital twins are increasingly important in science and engineering. Digital twins utilize mathematical models to provide added precision to decision-making. However, physics-informed models are challenging to build, calibrate, and validate with existing data science methods. Model-based design of experiments (MBDoE) is a popular framework for optimizing data collection to maximize parameter precision in mathematical models and digital twins. In this work, we apply MBDoE, facilitated by the open-source package Pyomo.DoE, to train and validate mathematical models for batch crystallization. We quantitatively examined the estimability of the model parameters for experiments with different cooling rates. This analysis provides a quantitative explanation for the heuristic of using multiple experiments at different cooling rates.

Lynch, Hailey↗
DOE OSTI2025

Multiscale Modeling of the Mechanical Response of Silicon Carbide Composite Within the Accelerated Fuel Qualification Framework

The accelerated fuel qualification (AFQ) framework has been used for the initial development of multiscale modeling of silicon carbide (SiC) fiber reinforced composite (SiC-SiC). The AFQ framework provides a methodology to leverage physics-informed multiscale modeling along with a reduced set of empirical test data to reduce the time and cost of licensing and qualification of new nuclear fuel systems while maintaining the overall nuclear power plant safety case. SiC-SiC is being proposed for in-core applications, most notably fuel cladding, for current and next-generation nuclear reactors because of its high temperature stability, irradiation tolerance, and ability to withstand many accident conditions. As these composites exhibit multiscale architectures and complex microstructure-based fracture mechanics, it is an appealing use case for the AFQ methodology. While the end goal of this work is a single multiscale model that can be used for predictive in-core performance, current focus is on the individual various length scale models. Four individual models have been initially developed from microscale to engineering system level to capture key physics-based effects across different length scales. These models include a microscale homogenized tow model, a mesoscale fast Fourier transform–based weave model that integrates the homogenized tow model, a mesoscale finite element–based weave model, and a system-level BISON fuel performance model. Results of these models have undergone an initial comparison with separate-effects test data showing a good match to experimental results. By using the AFQ framework during model development, several near-term benefits have been secured including a reduction in development time for the SiC-SiC cladding, more targeted irradiation testing, and a better understanding of uncertainty.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1990

An improved approach for flight readiness assessment

An improved methodology for quantitatively evaluating failure risk for a spaceflight system in order to assess flight readiness is presented. This methodology is of particular value when information relevant to failure prediction, including test experience and knowledge of parameters used in engineering analyses of failure phenomena, is limited. In this approach, engineering analysis models that characterize specific failure modes based on the physics and mechanics of the failure phenomena are used in a prescribed probabilistic structure to generate a failure probability distribution that is modified by test and flight experience in a Bayesian statistical procedure. The probabilistic structure and statistical methodology are generally applicable to any failure mode for which quantitative engineering analysis can be employed to characterize the failure phenomenon and are particularly well suited for use under the constraints on information availability that are typical of such spaceflight systems as the Space Shuttle and planetary spacecraft.

Moore, N. R.↗
NASA NTRS1987

A report on NASA software engineering and Ada training requirements

NASA's software engineering and Ada skill base are assessed and information that may result in new models for software engineering, Ada training plans, and curricula are provided. A quantitative assessment which reflects the requirements for software engineering and Ada training across NASA is provided. A recommended implementation plan including a suggested curriculum with associated duration per course and suggested means of delivery is also provided. The distinction between education and training is made. Although it was directed to focus on NASA's need for the latter, the key relationships to software engineering education are also identified. A rationale and strategy for implementing a life cycle education and training program are detailed in support of improved software engineering practices and the transition to Ada.

Legrand, Sue↗