Search NASA⌕ Search

SEARCH · Search NASA

Results for “observable behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Magnetic properties of magnetoactive spin clusters

A simple model is proposed for describing magnetic properties of magnetoactive nanoclusters, which permits exact analytic solution. Exact expressions are obtained for thermodynamic characteristics of the model, which hold in the entire range of temperatures, magnetic fields, and interaction parameters. It is found that in the case of easy-axis anisotropy, the field dependence of magnetization of a nanocluster consisting of N particles with a spin of 1/2 has [N/2] fractional plateaus ([ Horizontal-Ellipsis ] is the integer part) corresponding to polarized phases with ruptures singlet pairs. A nonmonotonic behavior observed for the magnetic susceptibility of an easy-plane cluster is typical of gap magnets. The spin gap between the ground state and excited states is proportional to the anisotropy parameter.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-frequency absorption of the dynamic mixed state in the surface superconductivity region

We analyze the absorption of a high-frequency electromagnetic field in the type II superconductor Pb{sub 0.8}In{sub 0.2} in magnetic fields H{sub c2} < H < H{sub c3}. The absorption component proportional to the rate of variation of the external magnetic field is detected. We assume that this absorption component is associated with the dynamic mixed state of the superconducting shell containing 2D magnetic flux vortices (Kulik vortices). The motion of these vortices under the action of the critical current ensures the required difference between the external and internal magnetic inductions of the superconducting shell upon a change in the external magnetic field. This model correctly describes the observed behavior of absorption of rf electromagnetic radiation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Searching for the QCD critical point in AA collisions at CERN SPS

We investigate the transverse momentum correlations of pairs of opposite charged pions near their production threshold. Through intermittency analysis, we search for power-law dependence on observation scale, as dictated by critical QCD. We analyze the data on the most central collisions in four A systems (A = p, C, Si, Pb) at maximum SPS energy. We find a significant effect for the SiSi system approaching in size the critical QCD predictions as measured by the intermittency index {phi}{sub 2}. Absence of this effect in the ({pi}{sup -}, {pi}{sup -}) sector of the SiSi system gives further support that the observed behavior in the isoscalar mode is of critical origin.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Wannier-Stark states in a superlattice of InAs/GaAs quantum dots

Electron and hole emission from states of a ten-layer system of tunneling-coupled vertically correlated InAs/GaAs quantum dots (QDs) is studied experimentally by capacitance-voltage measurements and deep-level transient spectroscopy. The thickness of GaAs interlayers separating sheets of InAs QDs was {approx}3 nm, as determined from transmission electron microscope images. It is found that the periodic multimo-dal DLTS spectrum of this structure exhibits a pronounced linear shift as the reverse-bias voltage U{sub r} applied to the structure is varied. The observed behavior is a manifestation of the Wannier-Stark effect in the InAs/GaAs superlattice, where the presence of an external electric field leads to the suppression of coupling between the wave functions of electron states forming the miniband and to the appearance of a series of discrete levels called Wannier-Stark ladder states.

36 MATERIALS SCIENCE↗

Magnetic State of Quasiordered Fe–Al Alloys Doped with Ga and B: Magnetic Phase Separation and Spin Order

Results of structural, magnetic, and Mössbauer studies of quasi ordered alloys Fe{sub 65}Al{sub 35−} {sub x}M{sub x} (M{sub x} = Ga, B; x = 0, 5 at %) are presented. The magnetic state of examined structurally–single-phase alloys at low temperatures is interpreted from the viewpoint of magnetic phase separation. An explanation is proposed for the observed behavior of magnetic characteristics of Fe{sub 65}Al{sub 35} and Fe{sub 65}Al{sub 30}Ga{sub 5} in the framework of the model of two magnetic phases, a ferromagnetic-type one and a spin density wave. The boron-doped alloy Fe{sub 65}Al{sub 30}B{sub 5} is shown to demonstrate behavior that is typical of materials with the ferromagnetic type of ordering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A study in three-dimensional chaotic dynamics: Granular flow and transport in a bi-axial spherical tumbler

We study three-dimensional (3D) chaotic dynamics through an analysis of transport in a granular flow in a half-full spherical tumbler rotated sequentially about two orthogonal axes (a bi-axial “blinking” tumbler). The flow is essentially quasi-two-dimensional in any vertical slice of the sphere during rotation about a single axis, and we provide an explicit exact solution to the model in this case. Hence, the cross-sectional flow can be represented by a twist map, allowing us to express the 3D flow as a linked twist map (LTM). We prove that if the rates of rotation about each axis are equal, then (in the absence of stochasticity) particle trajectories are restricted to two-dimensional (2D) surfaces consisting of a portion of a hemispherical shell closed by a “cap''; if the rotation rates are unequal, then particles can leave the surface they start on and traverse a volume of the tumbler. The period-one structures of the governing LTM are examined in detail: analytical expressions are provided for the location of period-one curves, their extent into the bulk of the granular material, and their dependence on the protocol parameters (rates and durations of rotations). Exploiting the restriction of trajectories to 2D surfaces in the case of equal rotation rates about the axes, a method is proposed for identifying and constructing 3D Kolmogorov--Arnold--Moser (KAM) tubes around the normally elliptic period-one curves. The invariant manifold structure arising from the normally hyperbolic period-one curves is also examined. When the motion is restricted to 2D surfaces, the structure of manifolds of the hyperbolic points in the bulk differs from that corresponding to hyperbolic points in the flowing layer. Each is reminiscent of a template provided by a non-integrable perturbation to a Hamiltonian system, though the governing LTM is not. This highlights the novel 3D chaotic behaviors observed in this model dynamical system.

42 ENGINEERING↗

Helium impurity transport on grain boundaries: Enhanced or inhibited?

We present atomistic simulations that show that the transport of helium is inhibited on grain boundaries (interfaces between crystal grains) in tungsten. This finding is contrary to self-diffusion and diffusion of substitutional impurities in metals, for which transport is generally faster along grain boundaries, but it is similar to the behavior observed for hydrogen in past studies on low-angle grain boundaries, for which transport also occurs via interstitial diffusion. In the case of helium transport in tungsten, transport is biased toward grain boundaries, but once a helium atom or group of atoms finds its way to the grain boundary, diffusion is impeded rather than enhanced. The reduced rate of transport on grain boundaries produces a higher concentration of helium near the grain boundaries. Here, the effect arises from the relative insolubility of helium in most materials combined with the size mismatch between helium and tungsten, which results in an interstitial diffusion mechanism rather than diffusion that relies on the presence of self-vacancies. In light of this, it is important to note that grain boundaries will not facilitate transport of helium in tungsten and other metals, but in fact that helium is immobilized on grain boundaries.

36 MATERIALS SCIENCE↗

Idiosyncratically tuned switching behavior of riboswitch aptamer domains revealed by comparative small-angle X-ray scattering analysis

Riboswitches are structured mRNA elements that regulate gene expression upon binding specific cellular metabolites. It is thought that the highly conserved metabolite-binding domains of riboswitches undergo conformational change upon binding their cognate ligands. To investigate the generality of such a mechanism, we employed small-angle X-ray scattering (SAXS). We probed the nature of the global metabolite-induced response of the metabolite-binding domains of four different riboswitches that bind, respectively, thiamine pyrophosphate (TPP), flavin mononucleotide (FMN), lysine, and S-adenosyl methionine (SAM). We find that each RNA is unique in its global structural response to metabolite. Whereas some RNAs exhibit distinct free and bound conformations, others are globally insensitive to the presence of metabolite. Thus, a global conformational change of the metabolite-binding domain is not a requirement for riboswitch function. It is possible that the range of behaviors observed by SAXS, rather than being a biophysical idiosyncrasy, reflects adaptation of riboswitches to the regulatory requirements of their individual genomic context.

59 BASIC BIOLOGICAL SCIENCES↗

Utah FORGE 5-2419: Temperature Testing of Proppants for EGS and Stimulation of Electromagnetic Fracture Mapping Using Electrically-Conducive Proppants - 2024 Annual Workshop Presentation

This is a presentation on the Temperature Testing of Proppants for EGS and Stimulation of Electromagnetic Fracture Mapping Using Electrically-Conducive Proppants by Stevens Institute of Technology, presented by Cheng Chen. This video slide presentation discusses well controlled laboratory experiments testing the high-temperature performance of electrically-conductive and non-electrically-conductive proppants in maintaining fractures hydraulic and electrical conductivities to understand and quantify the thermal-hydrologic-mechanical-chemical mechanisms that regulate the observed behaviors. This will be tested using proppant/fracture imaging via borehole electromagnetic measurements. This presentation was featured in the Utah FORGE R&D Annual Workshop on August 15, 2024.

15 GEOTHERMAL ENERGY↗

Biaxial texturing of inorganic photovoltaic thin films using low energy ion beam irradiation during growth

We describe our efforts to control the grain boundary alignment in polycrystalline thin films of silicon by using a biaxially textured template layer of CaF{sub 2} for photovoltaic device applications. We have chosen CaF{sub 2} as a candidate material due to its close lattice match with silicon and its suitability as an ion beam assisted deposition (mAD) material. We show that the CaF{sub 2} aligns biaxially at a thickness of {approx}10 nm and, with the addition of an epitaxial CaF{sub 2} layer, has an in-plane texture of {approx}15{sup o}. Deposition of a subsequent layer of Si aligns on the template layer with an in-plane texture of 10.8{sup o}. The additional improvement of in-plane texture is similar to the behavior observed in more fully characterized IBAD materials systems. A germanium buffer layer is used to assist in the epitaxial deposition of Si on CaF{sub 2} template layers and single crystal substrates. These experiments confirm that an mAD template can be used to biaxially orient polycrystalline Si.

36 MATERIALS SCIENCE↗

The insufficiency of the charge transfer model for resonant $\text{XES}$ in $\text{UF}$ 4

Recently, it was suggested that the single-electron charge transfer model (ligand 2p to Uranium 5f transition) could be used to explain the U M 4,5 Resonant X-ray Emission Spectroscopy (XES) of uranium dioxide (UO 2 ) and uranium tetrafluoride (UF 4 ). Here in this report, it is shown that this model produces results inconsistent with a joint consideration of both of the bandgaps of UO 2 and UF 4 and is thus insufficient to explain the observed behavior. An alternative Raman-based model is proposed.

36 MATERIALS SCIENCE↗

A Pilot-Scale Evaluation of Natural Gas-Based Foam at Elevated Pressure and Temperature Conditions

Abstract Nitrogen (N2) and Carbon Dioxide (CO2) foams have been used as hydraulic fracturing fluids for several decades to reduce water usage and minimize damage in water-sensitive reservoirs. These foam treatments require gases to be liquefied and transported to site. An alternative approach would be to use natural gas (NG) that is readily available from nearby wells, pipelines, and processing facilities as the internal, gaseous phase to create a NG-based foam. Hydraulic fracturing with NG foam is a relatively inexpensive option, makes use of an abundant and often wasted resource, and may even provide production benefits in certain reservoirs. As part of an ongoing development project sponsored by the Department of Energy (DOE), the surface process to create NG foam is being developed and the properties of NG foam are being explored. This paper presents recent results from a rigorous pilot-scale demonstration of NG foam over a range of operating scenarios relevant to surface and bottomhole conditions with a variety of base-fluid mixtures. The Pilot-scale Foam Test Facility (PFTF) used in these investigations is first described. The PFTF is capable of generating foamed fluids at pressures up to 7,500 psig and at temperatures in excess of 300°F. Then, results from several investigations aimed at proving NG foam at conditions relevant to the field are presented. NG foam was characterized using rheology measurements and flow visualization techniques. Experiments were performed to investigate the texture and stability of NG foam generated by two different mixing methods: one using a custom designed tee to match mixing velocities in the field where the gas phase is jetted into the aqueous stream, and another to ensure comprehensive mixing for laboratory analysis. Parametric studies were conducted to explore the effects of flow rate, foam quality, and temperature on the stability of NG foam. Moreover, different fluid preparations were used to investigate the effect of base fluid and additive concentrations on the stability of NG foams. Additional laboratory studies that investigated foam stability with produced water and multicomponent NG mixtures are also reported. The NG foams explored in these investigations exhibited typical, shear-thinning behavior observed in rheological studies of N2- and CO2-based foams. The measured viscosity and observed stability indicate that NG foams are well suited for fracturing applications. Like other foams, NG foam exhibits sensitivity to operating temperature characterized by a decrease in apparent viscosity as temperature increases. Rapid foam breakdown was observed at significantly elevated temperatures exceeding 290°F. In addition to fluid characterization, these investigations also yielded several key lessons that should be applied to future field demonstrations of NG foam.

Beck, Griffin↗

Ductile failure X-prize.

Fracture or tearing of ductile metals is a pervasive engineering concern, yet accurate prediction of the critical conditions of fracture remains elusive. Sandia National Laboratories has been developing and implementing several new modeling methodologies to address problems in fracture, including both new physical models and new numerical schemes. The present study provides a double-blind quantitative assessment of several computational capabilities including tearing parameters embedded in a conventional finite element code, localization elements, extended finite elements (XFEM), and peridynamics. For this assessment, each of four teams reported blind predictions for three challenge problems spanning crack initiation and crack propagation. After predictions had been reported, the predictions were compared to experimentally observed behavior. The metal alloys for these three problems were aluminum alloy 2024-T3 and precipitation hardened stainless steel PH13-8Mo H950. The predictive accuracies of the various methods are demonstrated, and the potential sources of error are discussed.

36 MATERIALS SCIENCE↗

CTH Simulation of PBX-9501 Taylor Tests

During March-May 2011, multiple Taylor impact tests were conducted at LANL, examining the behavior of PBXN-9 and PBX-9501 under rapid loading. Subsequently, a computational hydrodynamics code (CTH) model was developed to mimic the deformation behavior observed in these impact tests with PBX-9501 would likely initiate upon impact. Also examined was whether an inert slug behind the explosive would lead to initiation at lower, more easily attainable velocities. The simplified model used here showed a minimum velocity for ignition of 530 m/s which was unchanged by the addition of a plastic slug behind the sample. The use of a lead slug did lower the minimum velocity to 460 m/s. These values are likely more qualitative at this point because multiple simplifications are currently used in the materials properties and test geometry. The results do show that this approach is capable of determining ignition due to Taylor impact.

36 MATERIALS SCIENCE↗

Studies of anisotropy of iron based superconductors

To study the electronic anisotropy in iron based superconductors, the temperature dependent London penetration depth, Δλ (T), have been measured in several compounds, along with the angular dependent upper critical field, H c2 (T). Study was undertaken on single crystals of Ba(Fe 1-x Co x ) 2 As 2 with x=0.108 and x=0.127, in the overdoped range of the doping phase diagram, characterized by notable modulation of the superconducting gap. Heavy ion irradiation with matching field doses of 6 T and 6.5 T respectively, were used to create columnar defects and to study their effect on the temperature Δλ (T). The variation of the low-temperature penetration depth in both pristine and irradiated samples was fitted with a power-law function Δλ (T) = AT n . Irradiation increases the magnitude of the pre-factor A and decreases the exponent n, similar to the effect on the optimally doped samples. This finding supports the universal s ± scenario for the whole doping range. Knowing that the s ± gap symmetry exists across the superconducting dome for the electron doped systems, we next looked at λ (T), in optimally - doped, SrFe 2 (As 1-x P x ) 2 , x =0.35. Both, as-grown (T c ~ 25 K) and annealed (T c ~ 35 K) single crystals of SrFe 2 (As 1-x P x ) 2 were measured. Annealing decreases the absolute value of the London penetration depth from λ(0) = 300 ± 10 nm in as-grown samples to λ (0) = 275±10 nm. At low temperatures, λ (T) ~ T indicates a superconducting gap with line nodes. Analysis of the full-temperature range superfluid density is consistent with the line nodes, but differs from the simple single-gap d-wave. The observed behavior is very similar to that of BaFe 2 (As 1-x P x ) 2 , showing that isovalently substituted pnictides are inherently different from the charge-doped materials. In-plane resistivity measurements as a function of temperature, magnetic field, and its orientation with respect to the crystallographic ab-plane were used to study the upper critical field, H c2 , of two overdoped compositions of Ba(Fe 1-x Ni x ) 2 As 2 , x=0.054 and x=0.072. Measurements were performed using precise alignment (with accuracy less than 0.1°) of the magnetic field with respect to the Fe-As plane. The dependence of the H c2 on angle θ between the field and the ab- plane was measured in isothermal conditions in a broad temperature range. We found that the shape of the H c2 vs. θ curve clearly deviates from the Ginzburg-Landau theory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

2014 WSEAT X-Prize

The 2014 WSEAT X-Prize is modeled as a double blind study to challenge the computational and material mechanics communities methodologies to develop better capabilities in modeling and experimentation to predict the failure in ductile metals. The challenge is presented as a distinct, yet relatively, simple geometry with all reported modeling predictions blind to each of the modeling teams. The experimental testing is validated by two independent test labs to confirm the experimentally observed behavior and results are unbiased and repeatable. The WSEAT X-Prize was issued to both external participants and internal participants as the Sandia Fracture Challenge 2 (SFC2) on May 30, 2014. A Challenge Supplemental Information Packet was sent to participants on August 13, 2014 to Prior years SFCs focused on the ability to predict failures under a quasi-static loading condition that focused on either a shear or tensile-dominated failure mode. This year’s challenge focuses on a geometry with a shear and/or tensile-dominated failure mode influenced by a moderate strain-rate ductile fracture in a metallic alloy.

36 MATERIALS SCIENCE↗

Nitric-glycolic flowsheet evaluation with the slurry-fed melt rate furnace

The Savannah River National Laboratory (SRNL) was tasked to support validation of the Defense Waste Processing Facility (DWPF) melter offgas flammability model for the nitric-glycolic (NG) flowsheet. The work supports Deliverable 4 of the DWPF & Saltstone Facility Engineering Technical Task Request (TTR)1 and is supplemental to the Cold Cap Evaluation Furnace (CEF) testing conducted in 2014.2 The Slurry-fed Melt Rate Furnace (SMRF) was selected for the supplemental testing as it requires significantly less resources than the CEF and could provide a tool for more rapid analysis of melter feeds in the future. The SMRF platform has been used previously to evaluate melt rate behavior of DWPF glasses, but was modified to accommodate analysis of the offgas stream. Additionally, the Melt Rate Furnace (MRF) and Quartz Melt Rate Furnace (QMRF) were utilized for evaluations. MRF data was used exclusively for melt behavior observations and REDuction/OXidation (REDOX) prediction comparisons and will be briefly discussed in conjunction with its support of the SMRF testing. The QMRF was operated similarly to the SMRF for the same TTR task, but will be discussed in a separate future report. The overall objectives of the SMRF testing were to; 1) Evaluate the efficacy of the SMRF as a platform for steady state melter testing with continuous feeding and offgas analysis; and 2) Generate supplemental melter offgas flammability data to support the melter offgas flammability modelling effort for DWPF implementation of the NG flowsheet.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Analysis of Cavern and Well Stability at the Bryan Mound SPR Site Using the M–D Salt Creep Model

This report presents computational analyses that simulate the structural response of caverns at the Strategic Petroleum Reserve Bryan Mound site. The cavern field comprises 20 caverns. Five caverns (1, 2, 4, and 5; 3 was later plugged and abandoned) were acquired from industry and have unusual shapes and a history dating back to 1946. The other 16 caverns (101-116) were leached according to SPR standards in the mid-1980s and have tall cylindrical shapes. The history of the caverns and their shapes are simulated in a 3-D geomechanics model of the site that predicts deformations, strains, and stresses. Historical wellhead pressures are used to calculate cavern pressures up through July 2016. Because of the extent of heterogeneous creep behavior observed throughout the Bryan Mound site, a set of cavern-specific creep coefficients was developed to produce better matches with measured cavern closure and surface subsidence. For this new implementation of the model, there are two significant advances: the use of the multimechanism deformation (M-D) salt creep model to evaluate both steady-state and transient salt creep; and the creation of finite element mesh geometries for the caverns that nearly exactly match the geometries obtained through sonar measurements. The results of the finite element model are interpreted to provide information on the current and future status of subsidence, well integrity, cavern stability, and drawdown availability.

58 GEOSCIENCES↗