Search NASA⌕ Search

SEARCH · Search NASA

Results for “outgassing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Relative motions of fragments of the split comets. III - A test of splitting and comets with suspected multiple nuclei

A quantitative test of splitting for comets with suspected multiple nuclei has been formulated using a model which assumes the motions of cometary fragments to be due primarily to outgassing. The model expresses the relative motion of the cometary fragments in terms of the time of splitting and the differential force, which are determined by measurements of the position angle and the separation distance between fragments. The test is applied to 18 comets suspected of having multiple nuclei, of which the comets Sawerthal 1888 I, Campbell 1914 IV, Whipple-Fedtke-Tevzadze 1943 I, Honda 1955 V, Wild 1968 III and Tago-Sato-Kosaka 1969 IX were found to be clear cases of split comets and Davidson 1889 IV and Periodic Giacobini 1896 V were judged to be likely candidates. At least three of the secondary nuclei confirmed can be classified as short-lived companions, while only two appear to be persistent.

Sekanina, Z.↗

Laser /39/Ar-/40/Ar dating of two clasts from consortium breccia 73215

A laser Ar-39-Ar-40 study of the components of an ANT-suite anorthositic gabbro and a black aphanite from a consortium breccia is reported. A wide range of K-Ar ages is found for the plagioclase in the anorthositic gabbro; at the centers of the largest grains is material showing the greatest age (older than 4.11 billion years) while the youngest material (3.81-3.88 billion years) is found near the grain margins. Partial outgassing of the clasts upon incorporation into the breccia could account for the age patterns. The black aphanite clast appears to be cogenetic with the aphanite that forms the breccia matrix. The time of crystallization of a lunar granite has also been measured by the laser technique.

Eichhorn, G.↗

Collimation of high-speed flow with thermal spread losses

The operation of the neutral beam collimator designed for the mass spectrometer inlet system of the Space Shuttle Induced Environment Contamination Monitor system is discussed. The collimator will allow selective views of a 10 deg half-angle conical volume of space so that backscattered molecules from within this volume can be measured and related to the column densities of outgassing species. Gas molecules which enter the collimator but do not have a view from the entrance orifice to the exit are directed to a gas getter and eliminated. The loss of properly directed molecules in the collimator due to their thermal distribution is calculated for the case of a directed flow, which would occur when the collimator is pointed in the direction of motion of the spacecraft. Inlet to outlet flux ratios are also computed as a function of angle of attack.

Taeusch, D. R.↗

Effects of hydraulic fluid CVCM on silver-Teflon

Changes in the solar absorptance of silver-Teflon (Ag/FEP) surfaces were measured after contamination by the outgassing products of hydraulic fluid and irradiation by solar simulators. Although radiator surfaces are selected for stability to the solar ultraviolet and particulate environment, contaminant deposition and their interaction with solar exposure can degrade their performance. The test procedure to deposit the hydraulic fluid collected volatile condensible material (CVCM), irradiate, and determine solar absorptance changes by reflectance measurements using a spectrophotometer and a solar simulator is described. The tests showed that for the estimated deposition rates on the Ag/FEP, the hydraulic fluid CVCM fraction remaining under normal conditions (above -40 C) would not degrade its performance. The residual CVCM can be easily removed from Ag/FEP by wiping with a solvent saturated flannel. The changes in solar absorptance with the CVCM film thickness and the radiation exposure duration are reported, concluding that vacuum ultraviolet radiation did not prevent easy removal of CVCM.

Muscari, J. A.↗

Identification of gaseous SO2 and new upper limits for other gases on Io

The identification of gaseous sulfur dioxide on Io by Voyager 1 is reported, and preliminary upper limits for other atmospheric gases are presented. Averaged spectra taken by the Voyager IRIS experiment in the range of 1,000 to 1,200/cm are interpreted as containing three fundamental sulfur dioxide bands, with intensities most nearly corresponding to an atmospheric model with a sulfur dioxide abundance of 0.2 cm atm. Upper limits for COS, CS2, SO3, H2S, CO2, O3, N2O, H2O, CH4, NH3 and HC1, not detected in the spectra, were calculated on the basis of the radiative transfer equation for temperatures of 130 and 250 K; a depletion of hydrogen, carbon and nitrogen is noted. It is suggested that a SO2 outgassing from a cooling sulfur extrusion is the major source of the observed atmospheric SO2.

Pearl, J.↗

A test program for solar collectors

Rigorous environmental and performance tests qualify solar collector for use in residential solar-energy systems. Testing over 7 month period examined pressurized effects, wind and snow loading, hail damage, solar and thermal degradation, effects of pollutants, efficiency, and outgassing. Test procedures and results are summarized in tables, graphs, and text.

Source record↗

All-inorganic spark-chamber frame

Outgassing is reduced by using ceramic and glass materials exclusively. Frames are assembled from four beams with rabbeted ends. Only ceramic or glass adhesives are used, and printed circuit is applied by screen printing directly on beams. Inorganic frames provide stable spark-chamber operation without gas refill, useful in terrestrial gamma-ray studies, in high-energy physics research, and other applications.

Heslin, T. M.↗

Transducer for extreme temperatures and pressures

Transducer with limits of 500 C and 10 kilobars responds to mechanical vibrations up to 20 kHz. Vibration pickup performs well in nuclear reactors, turbines, and other extreme environments. Low pressure problems of outgassing and "virtual" leakage experienced with conventional transducers potted in epoxy are eliminated with use of glass and metal supports. Interior opens to atmosphere, preventing buildup of pressure-induced stresses. Spring holds transducer against housing, reducing strain distortion.

Nadler, H.↗

Assessment of shuttle payloads gaseous environment contamination and its control

A prediction is given of the in-orbit gaseous environment and the contamination it could produce on cryogenic and room temperature surfaces of payloads in the shuttle bay. The time varying environment was obtained by the superposition of the calculated shuttle environment for a discrete time and payload induced environments measured in large space chambers. Representative contaminant surface accretions were calculated for flights 1 week and 1 month long for payloads having the largest source of outgassing and an orbit of 200 km. A number of calculations were based on the magnitude of the sources, the molecular natures, the decay rate with time, the sticking coefficients, the view factors, and the temperatures of the surfaces being contaminated. Significant results are reported.

Scialdone, J. J.↗

Notes on the origin of the Trojan asteroids

The dynamic plausibility of various ideas on the origin of the Trojans is briefly discussed. We take the point of view that the present, tightly bound population has secularly evolved through some mechanism from less to more tightly bound orbit configurations. The mechanisms considered are changes in the Jovian mass or semimajor axis during planetary formation, collisional interactions with external, asteroidal material, and cometary outgassing.

Yoder, C. F.↗

Scanning Auger Microprobe and atomic absorption studies of lunar volcanic volatiles

Results on lunar volatile transport processes have been obtained by studying green and brown glass droplets, orange and black core tube samples and the surface sample 74241 with the Scanning Auger Microprobe (SAM) and by Flameless Atomic Absorption Analysis (FLAA). SAM analyses show that the most dominant volatiles in the top few atomic layers of droplets are Zn and S, confirming that the surface Zn and S are good indicators of pyroclastic origin, and they are not entirely present as ZnS. In addition, FLAA thermal release profiles show that almost all the Zn and Cd are on grain surfaces, indicating that Zn and Cd were completely outgassed from lava fountain products during the volcanic eruption, were recondensed during or after the eruptions, and are thus present as surface coating.

Cirlin, E. H.↗

Brief note for consideration of active seismic exploration on Mars

Considerable controversy has arisen regarding the existence of water and water ice below the surface of Mars. Results of laboratory internal friction measurements on strongly outgassed rocks, recently made as part of an effort to interpret the high seismic Q values observed in the lunar crust, show that moisture absorbed in pores and cracks causes the low Q values. Unfortunately, the Viking seismology investigation found a surprisingly inactive planet. This note makes the case for active seismic exploration in order to ascertain the existence of liquid water in the crust from Q determinations.

Tittmann, B. R.↗

Qualification of black electrically conductive paint

A paint having low electrical resistance has been developed. Using a low outgassing polyurethane resin, specific amounts of conductive carbon particles were added to produce paint compositions having a range of electrical resistance. Methods of testing for electrical resistance are discussed. The adhesion of these paints has been tested successfully over the temperature range from liquid nitrogen temperature up to 80 C (176 F).

Park, J. J.↗

Kinetic inhibition of CO and N2 reduction in the solar nebula

It is shown that the conversion of CO to methane and of N2 to ammonia in the primitive solar nebula was probably so slow relative to radial mixing rates or nebula evolutionary rates that only small amounts of NH3 and CH4 could have been present. Thus most of the nitrogen was present as N2 and most of the carbon as CO and CO2 throughout the nebula. The consequences of this kinetic effect upon the composition of cometary ices and of the Jovian planets, the melting and outgassing behavior of ice rich planetary satellites, and the abundance of carbon in the terrestrial planets are briefly discussed.

Lewis, J. S.↗

Thermal stability and aging of some new anaerobic adhesives for structural binding

Polyurethane-modified high impact anaerobic adhesives have been chosen for a bonding application where impact cushion is critical. These adhesives meet all the requirements for high rate production and automatic assembly techniques. With aluminum adherends, one selected adhesive cured at room temperature with the recommended activator retained sixty percent of its original impact strength after twenty-six week aging at 100 C. The impact strength aging, the thermogravimetric analysis results, the outgassing data, and other observations made in this work indicate that the adhesives cured by simple heating give a more durable bond than that cured with an activator at room temperature.

Lee, S. Y.↗

F region above Kauai - Measurement, model, modification

Results of the Lagopedo II experiment conducted from Kauai, Hawaii to investigate the ionospheric modification that occurs when rocket combustion products are introduced into the O(+)-rich F region are presented. The experiment involved the detonation of a chemical explosion in the F2 peak accompanied by rocket-borne measurements of ion composition and electron content in the vicinity of the explosion. The experimental data is found to be in good agreement with the predictions of a model of the nighttime ion densities in the midlatitude laminar ionosphere, with the exception of N2(+) densities before the explosion. H2O(+) and H3O(+) currents produced by considerable H2O outgassing from the rocket are used to determine a H3O(+)/H2O(+) dissociative recombination rate averaging 1.6 to 1.08, depending on model assumptions. At the time of the explosion, an ionic void 1 km in radius is observed, the boundary of which is characterized by a steep gradient in ionic densities. Evidence of variations in the concentrations of ambient ion species, new reactant species and ionic depletion by sweeping is also obtained.

Johnson, C. Y.↗

IUS solid rocket motor contamination prediction methods

A series of computer codes were developed to predict solid rocket motor produced contamination to spacecraft sensitive surfaces. Subscale and flight test data have confirmed some of the analytical results. Application of the analysis tools to a typical spacecraft has provided early identification of potential spacecraft contamination problems and provided insight into their solution; e.g., flight plan modifications, plume or outgassing shields and/or contamination covers.

Mullen, C. R.↗