Search NASA⌕ Search

SEARCH · Search NASA

Results for “phosphates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

New ytterbium-phosphate glass for diode-pumped lasers

A new ytterbium laser glass based on an alumoborophosphate composition is developed. It is shown that the chemical and thermal stabilities of this glass are record-high for phosphate glasses and that its spectral and luminescent characteristics compare well with popular laser glasses. A mould of laser-quality glass doped with ytterbium with a concentration of 5x10{sup 20} cm{sup -3} is synthesised. Active laser elements 5x5x2 mm in size are prepared from this glass for longitudinal diode pumping. These elements were used to fabricate a laser, whose output power in the cw regime reached 783 mW and maximum slope efficiency was 28.9%. Pulses with a duration of {approx}150 fs and a peak power of about 5 kW are obtained in the passive mode-locking regime. (active media)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Formation of pyrophosphates across grain boundaries induces the formation of mismatched but oriented interfaces in silver phosphate polypods

The interfaces and their misfit defects determine the materials properties for a wide range of applications, such as electronic devices, photocatalysis, and mechanical engineering, etc. However, current understanding of atomic interfacial structures is limited. Here we discover a special interfacial structure, mismatched but oriented interface via two distinct facets. Transmission and scanning electron microscopy results suggest that, in Ag 3 PO 4 polypods structures, interfaces of {1 0 0} and {1 1 0}, ({1 0 0}/(1 1 0}), {1 0 0}/{1 1 1}, {1 1 0}/{1 1 1}, and {1 0 0}/{1 0 0}, etc., have a certain orientation relationship, corresponding to the energy minima and coincident site lattice of interfacial atoms as demonstrated by molecular dynamics simulations. Density functional theory demonstrates that the formation of pyrophosphate and/or phosphates rotation to bond across the interface compensate the lattice mismatch at the interfaces, as well as deformations of Ag-O bonds. Furthermore, our work opens up a new avenue for a much wider range of interfacial structures, allow for a higher diversity of structures, and shine light on tailoring crystal structures, morphologies, and the resulting properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Mineralogic Transformation of Ferrihydrite Induced by Heterogeneous Reaction with Bioreduced Anthraquinone Disulfonate (AQDS) and the Role of Phosphate

Anthraquinone-2-6-disulfonate (AQDS) enhances electron donor utilization and mineral product crystallization in studies of Fe(III) oxide reductive mineralization by metal reducing bacteria (MRB) through heterogeneous redox reaction. In spite of the strong effect of AQDS in these systems, little information exits on its direct role in reductive mineralization. To provide such insights, bioreduced AQDS (AH2DS; dihydro-anthraquinone) was reacted with a 2-line, Si-substituted ferrihydrite under anoxic conditions at neutral pH in PIPES buffer. Phosphate (P) and bicarbonate (C); common adsorptive oxyanions and media/buffer components known to effect ferrihydrite mineralization; and Fe(II)aq (as a catalytic mineralization agent) were used in comparative experiments. Heterogeneous AH2DS oxidation coupled with Fe(III) reduction occurred within 0.13-1 day, with mineralogic transformation occurring thereafter. The product suite included lepidocrocite, goethite, and/or magnetite, with proportions varing with reductant:oxidant ratio (r:o) and the presence of P or C. Lepidocrocite was the primary product at low r:o in the absence of P or C, with evidence for multiple formation pathways. P inhibited reductive recrystallization, while C promoted goethite formation. Stoichiometric magnetite was the sole product at higher r:o in the absence and presence of P. Lepidocrocite was the primary mineralization product in the Fe(II)aq system, with magnetite observed at near equal amounts when Fe(II) was high [Fe(II)/Fe(III)]=0.5 and P was absent. P had a greater effect on reductive mineralization in the Fe(II)aq system, while AQDS was more effective than Fe(II)aq in promoting magnetite formation. The direct AH2DS-driven reductive reaction pathway produced mineral products that were different from AH2DS-ferrihydite-MRB systems, particularly in presence of P.

58 GEOSCIENCES↗

Rubidium uranyl phosphates and arsenates with polymeric tetrahedral anions: Syntheses and structures of Rb{sub 4}[(UO{sub 2}){sub 6}(P{sub 2}O{sub 7}){sub 4}(H{sub 2}O)], Rb{sub 2}[(UO{sub 2}){sub 3}(P{sub 2}O{sub 7})(P{sub 4}O{sub 12})] and Rb[(UO{sub 2}){sub 2}(As{sub 3}O{sub 10})]

The three new framework Rb uranyl phosphates and arsenates with anionic parts based on different type of polymeric anions have been prepared by high-temperature solid-state reactions: Rb{sub 4}[(UO{sub 2}){sub 6}(P{sub 2}O{sub 7}){sub 4}(H{sub 2}O)] (1), Rb{sub 2}[(UO{sub 2}){sub 3}(P{sub 2}O{sub 7})(P{sub 4}O{sub 12})] (2), Rb[(UO{sub 2}){sub 2}(As{sub 3}O{sub 10})] (3). The crystal structures of the synthesized compounds have been solved by direct methods: 1-monoclinic P2{sub 1}/c, a=9.672(1) A, b=12.951(1) A, c=32.231(3) A, beta=90.116(4){sup o}, V=4037.3(6) A{sup 3}, Z=4, R{sub 1}=0.0926 for 6351 unique reflections with |F{sub 0}|>=4sigma{sub F}; 2-monoclinic, P2{sub 1}/c, a=6.791(1) A, b=16.155(3) A, c=19.856(4) A, beta=97.48(5){sup o}, V=2159.8(7) A{sup 3}, Z=4, R{sub 1}=0.0286 for 3617 unique reflections with |F{sub 0}|>=4sigma{sub F}; 3-orthorhombic, Pbcn, a=10.558(1) A, b=11.037(1) A, c=11.464(1) A, V=1335.9(2) A{sup 3}, Z=4, R{sub 1}=0.0489 for 1384 unique reflections with |F{sub 0}|>=4sigma{sub F}. The structures of title are compounds based on 3D negatively charged frameworks with chemical compositions [(UO{sub 2}){sub 6}(P{sub 2}O{sub 7}){sub 4}(H{sub 2}O)]{sup 4-} in 1, [(UO{sub 2}){sub 3}(P{sub 2}O{sub 7})(P{sub 4}O{sub 12})]{sup 2-} in 2 and [(UO{sub 2}){sub 2}(As{sub 3}O{sub 10})]{sup -} in 3. These negative charges are compensated by rubidium cations which are in the channels of 1 and closed cages in structures of 2 and 3. The channels in 1 are directed along the a direction and have minimum dimensions approx5 Ax6 A. This is the first example of porosity generation through solid state synthesis in uranyl compounds. For the first time in uranium chemistry polymeric anionic groups P{sub 4}O{sub 12} and As{sub 3}O{sub 10} were observed in structure of 2 and 3. - Graphical abstract: The polyhedral (a) and topological (b) representation of the Rb{sub 4}[(UO{sub 2}){sub 6}(P{sub 2}O{sub 7}){sub 4}(H{sub 2}O)] crystal structure.

36 MATERIALS SCIENCE↗

Cation substitution in β-tricalcium phosphate investigated using multi-nuclear, solid-state NMR

The substitution of aluminium, gallium and sodium cations into β-tricalcium phosphate (β-TCP; Ca{sub 3}(PO{sub 4}){sub 2}) has been investigated, and the Ca sites involved successfully determined, using a combination of 1D {sup 31}P, {sup 27}Al, {sup 71}Ga, {sup 23}Na and {sup 43}Ca (natural abundance) NMR and 2D {sup 27}Al({sup 31}P), {sup 71}Ga({sup 31}P) and {sup 23}Na({sup 31}P) rotary-resonance-recoupled heteronuclear multiple-quantum correlation (R{sup 3}-HMQC) NMR. Over the compositional range studied, substitution of Ca{sup 2+} by Al{sup 3+} or Ga{sup 3+} was observed only on the Ca(5) site, whilst substitution by Na{sup +} was confined to the Ca(4) site. Some AlPO{sub 4} or GaPO{sub 4} second phase was observed at the highest doping levels in the Al{sup 3+} and Ga{sup 3+} substituted samples. - Graphical abstract: 2D contour plots with skyline projections showing recoupling of {sup 27}Al, {sup 71}Ga and {sup 23}Na to different {sup 31}P sites. - Highlights: • β-Ca{sub 3}(PO{sub 4}){sub 2} has been prepared pure and also with Al{sup 3+}, Ga{sup 3+} and Na{sup +} substituents. • Multi-nuclear 1D NMR and heteronuclear X({sup 31}P) recoupling have been used. • Models for substitution correctly predict site preference and occupancy. • Progressive changes in {sup 31}P spectra have been explained. • Al{sup 3+} and Ga{sup 3+} substitute onto the Ca(5) site, and Na{sup +} onto the Ca(4) site.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of titanium nanoparticles on self-cleaning and structural features of zinc-magnesium-phosphate glass

Graphical abstract: Water contact angle for sample S2, S3, S4 and S5. The water contact angle increased with increased the titanium NPs content (mol%). - Highlights: • ZnO–MgO–P{sub 2}O{sub 5} embedded TiO{sub 2} NPs prepared by conventional melt-quenching method. • The amorphous nature is confirmed by X-ray diffraction spectroscopy. • The structural characteristics of glasses is investigated using FTIR and Raman. • Wettability of the glasses surface by water contact angle. - Abstract: The loss of glass transparency on surface pollutants contamination unless inhibited not only causes vision obscurity but also responsible for major aesthetic damages of cultural heritage. It is due to the sticking of fine dirt particles on wetting layers, a complex process with several possible ramifications still to be clarified. We report the influence of titanium dioxide or titania (TiO{sub 2}) nanoparticles (NPs) on the structural and self-cleaning properties of zinc–magnesium–phosphate glasses. Following melt-quenching method glass samples of optimized composition (42 − x)P{sub 2}O{sub 5}–8MgO–50ZnO–xTiO{sub 2} with x = 0, 1, 2, 3 and 4 mol% are prepared. XRD patterns verified their amorphous nature and TEM images revealed the nucleation of TiO{sub 2} NPs of average diameter ≈4.05 ± 0.01 nm. Fourier transform infrared (FTIR) spectra displayed four absorption band centred at 1618–3438 cm{sup −1}, 902– 931 cm{sup −1}, 757–762 cm{sup −1} and 531–560 cm{sup −1}. Raman spectra exhibited four peaks each accompanied by a blue-shift. Water contact angle is found to increase with the increase of titanium NPs concentration into the amorphous matrix. This knowledge can be used to set up strategies and selective treatments to preventing glass transparency loss via the modification of self-cleaning attributes.

36 MATERIALS SCIENCE↗

Remarkable enhancement in crystalline perfection, second harmonic generation efficiency, optical transparency, and laser damage threshold in potassium dihydrogen phosphate crystals by L-threonine doping

Effect of L-threonine (LT) doping on crystalline perfection, second harmonic generation (SHG) efficiency, optical transparency, and laser damage threshold (LDT) in potassium dihydrogen phosphate (KDP) crystals grown by slow evaporation solution technique (SEST) has been investigated. The influence of doping on growth rate and morphology of the grown crystals has also been studied. Powder x-ray diffraction data confirms the crystal structure of KDP and shows a systematic variation in intensity of diffraction peaks in correlation with morphology due to varying LT concentration. No extra phase formation was observed which is further confirmed by Fourier transform Raman (FT-Raman) studies. High-resolution x-ray diffraction curves indicate that crystalline perfection has been improved to a great extent at low concentrations with a maximum perfection at 1 mol % doping. At higher concentrations (5 to 10 mol %), it is slightly reduced due to excess incorporation of dopants at the interstitial sites of the crystalline matrix. LDT has been increased considerably with increase in doping concentration, whereas SHG efficiency was found to be maximum at 1 mol % in correlation with crystalline. The optical transparency for doped crystals has been increased as compared to that of pure KDP with a maximum value at 1 mol % doping.

36 MATERIALS SCIENCE↗

Comment on “A model for phosphate glass topology considering the modifying ion sub-network” [J. Chem. Phys. 140, 154501 (2014)]

In a recent paper, Hermansen, Mauro, and Yue [J. Chem. Phys. 140, 154501 (2014)] applied the temperature-dependent constraint theory to model both the glass transition temperature, T{sub g}, and fragility, m, of a series of binary alkali phosphate glasses of the form (R{sub 2}O){sub x}(P{sub 2}O{sub 5}){sub 1−x}, where R represents an alkali species. Key to their success seems to be the retention of linear constraints between the alkali ion (R{sup +}) and the non-bridging oxygens near T{sub g}, which allows the model to mimic a supposed minimum for both T{sub g}(x) and m(x) located near x = 0.2. However, the authors have overlooked several recent studies that clearly show there is no minimum in m(x). We argue that the retention of the alkali ion constraints at these temperatures is unjustified and question whether the model calculations can be revised to meet the actual experimental data. We also discuss alternative interpretations for the fragility based on two-state thermodynamics that can accurately account for its compositional dependence.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of silver nanoparticles on the spectroscopic properties of Sm{sup 3+} doped boro-phosphate glasses

The Sm{sup 3+} doped novel boro-phosphate glasses containing silver nanoparticles (NPs) (SmBPxA) have been prepared following the melt quenching technique and their structural and spectroscopic behavior were studied through HR-TEM, optical absorption and photoluminescence spectral measurements. The TEM analysis validates the existence of Ag NPs with an average diameter of ~8 nm. The Surface plasmon resonance (SPR) band of silver NPs was found at around 600 nm from the absorption spectrum of the Sm{sup 3+} ions free glass sample. The optical band gap energy (E{sub opt}) corresponding to the direct and indirect allowed transitions and the Urbach energy (ΔE) values were determined from the absorption spectral measurements. The luminescence intensity is found to get enhance when the Ag NPs were embedded along with the Sm{sup 3+} ions in the prepared glasses due to the local electric field effect around the rare earth (RE) ion site produced by the SPR of Ag NPs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

New high-strength neodymium phosphate laser glass

A high-strength neodymium laser glass (SNLG) based on an alumoborophosphate composition is developed and synthesised; its physicochemical, spectral, luminescent, and lasing characteristics are studied. It is found that the chemical stability and thermal resistance of the new glass are considerably higher than the corresponding characteristics of known neodymium-doped phosphate laser glasses. Investigations of lasing upon longitudinal diode pumping showed that, due to the higher thermal resistance, the new glass allows one to obtain output powers twice as high as those of industrial GLS22 glass. (active media)

36 MATERIALS SCIENCE↗

Effect of nanosecond UV laser irradiation on luminescence and absorption in silver- and copper-containing phosphate glasses

Experimental evidence is presented that nanosecond UV laser irradiation of silver- and copper-containing barium phosphate glasses leads to luminescence quenching in the visible range. Subsequent heat treatment induces an absorption in the range 350 – 500 nm. These effects are due to the ionisation and fragmentation of subnanometre molecular clusters by laser radiation and subsequent (heat treatment-induced) formation of nanoparticles possessing plasmon resonance. Our numerical modelling results demonstrate the feasibility of producing stable Ag{sub n}Cu{sub m} hybrid molecular clusters in glass. Local modification of the optical properties of glass by laser light can be used for optical information recording. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ceramics Based on Powder Mixtures Containing Calcium Hydrogen Phosphates and Sodium Salts (Na{sub 2}CO{sub 3}, Na{sub 4}P{sub 2}O{sub 7}, and NaPO{sub 3})

Ceramic materials in the Na{sub 2}O–CaO–P{sub 2}O{sub 5} system have been produced using powder mixtures containing calcium hydrogen phosphates (monetite/brushite: CaHPO{sub 4}/CaHPO{sub 4} ∙ 2H{sub 2}O) and sodium salts (Na{sub 2}CO{sub 3} ∙ H{sub 2}O, Na{sub 4}P{sub 2}O{sub 7} ∙ 10H,O, and NaPO{sub 3}). These salts were used as precursors to the following high-temperature phases: Сa{sub 2}P{sub 2}O{sub 7}, Na{sub 2}O, Na{sub 4}P{sub 2}O{sub 7}, and NaPO{sub 3}. The amount of the salts in the powder mixtures was such that the oxide composition of the ceramics corresponded to 10 mol % sodium oxide for each mixture in the Na{sub 2}O–CaO–P{sub 2}O{sub 5} system. The powder mixtures were prepared using mechanical activation in acetone, which was accompanied by monetite rehydration to brushite. X-ray diffraction characterization showed that, after firing, the phase composition of the ceramics produced from the powder mixtures thus prepared lay in the Сa{sub 2}P{sub 2}O{sub 7}–NaCaPO{sub 4}–Na{sub 2}СaP{sub 2}O{sub 7}–Са(РО{sub 3}){sub 2} phase field. The resultant ceramic materials contain biocompatible and bioresorbable phases and can be recommended for bone implant fabrication.

36 MATERIALS SCIENCE↗

The Effect of Glass Chemistry on Caesium Volatility in Iron Phosphate Glass Systems - 19344

The UK currently has a stockpile of 99,000 m{sup 3} of intermediate level waste (ILW), with this figure expected to rise to 191,000 m{sup 3} by 2125. Current immobilisation options include cementation and thermal treatment, with cementation being the preferred candidate due to the simplicity of processing. However, thermal processing such as vitrification could offer significant volume reductions, up to 75 % for some waste-streams. In comparison, cementation is generally associated with a volume increase, with a typical waste package seeing a volume increase of 200 - 400 %. For vitrification to be accepted as the preferred treatment option of ILW in the UK, the issue of volatility during the vitrification process must be addressed. Volatile components of ILW such as Cs-137 and Sr-90 account for almost 50 % of the current total radioactivity produced by the UK's ILW stockpile. Therefore, the efficient retention of these elements into the glass immobilisation medium must be considered. Various approaches can be employed when trying to increase volatile retention, however this project has focussed on the influence of glass chemistry on volatility. A series of iron phosphate glasses containing 5 mol % of B{sub 2}O{sub 3}, MnO and ZnO have been produced, where additives have been substituted in place of Fe{sub 2}O{sub 3} in a standard 40Fe{sub 2}O{sub 3}-60P{sub 2}O{sub 5} system. All glass samples were characterised using Raman spectroscopy, SEM-EDX, thermal analysis, XRD and XRF. The glasses were then doped with caesium carbonate and re-melted in the system described below. A simple off-gas system has been developed and commissioned to capture and characterise volatiles released from the glass during melting. The off-gas system has been refined several times, with the most recent design comprising of a sealed stainless steel system, connected to two gas washing bottles containing 150 ml of 50 % nitric acid. Nitrogen gas is passed through the system for the duration of the experiment at a flow rate of ∼ 0.9 L/min to ensure efficient carryover of the volatiles released from the glass melt into the solutions in the gas washing bottles. The total retention of the volatiles can be measuring by analysing the contents of the gas washing bottles using ICP-MS and XRF of the final glass product. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Scalable, two–stage, autoinduction of recombinant protein expression in E. coli utilizing phosphate depletion

We report the scalable production of recombinant proteins in Escherichia coli, reliant on tightly controlled autoinduction, triggered by phosphate depletion in the stationary phase. The method, reliant on engineered strains and plasmids, enables improved protein expression across scales. Expression levels using this approach have reached as high as 55% of the total cellular protein. The initial use of the method in instrumented fed–batch fermentations enables cell densities of ~30 gCDW/L and protein titers up to 8.1 ± 0.7 g/L (~270 mg/gCDW). The process has also been adapted to an optimized autoinduction media, enabling routine batch production at culture volumes of 20 μl (384–well plates), 100 μl (96–well plates), 20 ml, and 100 ml. In batch cultures, cell densities routinely reach ~5–7 gCDW/L, offering protein titers above 2 g/L. Here, the methodology has been validated with a set of diverse heterologous proteins and is of general use for the facile optimization of routine protein expression from high throughput screens to fed–batch fermentation.

59 BASIC BIOLOGICAL SCIENCES↗

Characterization of Ce SUP 3+-tributyl phosphate coordination complexes produced by fused droplet electrospray ionization with a target capillary

Coordination complexes containing Ce(III) and tri-n-butyl phosphate (TBP) in the 1+, 2+ and 3+ charge states were generated using desorption electrospray ionization (DESI) mass spectrometry, in which the analyte solutions were supplied via a target capillary orthogonally situated with respect to the electrospray. Comparison with direct electrospray (ESI) showed that the same coordination complexes were produced in each experiment, and could be described by the general formula [Ce(NO3)m=0-2(TBP)n](3-m)+. This result indicates that DESI has utility for measuring metal speciation for metal ligand solutions where the gas-phase complexes generated by ESI have been correlated with solution speciation. Such an application would be useful for analyses where it is desirable to limit the total amount of metal being handled, or that have solvent systems that are not readily amenable to ESI. Both the direct ESI and DESI mass spectra showed similar trends with respect to the TBP:Ce ratio, viz. high values tend to favor formation of a larger fraction of the 1+ species, and the 2+ and 3+ species become relatively more important as the ratio is decreased. Within individual charge state ion envelopes, lower TBP:Ce ratios produce coordination complexes with fewer ligands, a trend also seen using both approaches. These trends again point toward strong similarity between the direct ESI and DESI analyses of the metal-ligand solutions. The DESI experiments were less sensitive for measuring the coordination complexes compared to the direct ESI experiments, by a factor of 10 - 100 depending on whether minimum detectable concentration or absolute ion abundances were considered. Nevertheless, mid-picomolar quantities of coordination complexes were measured using the target capillary, indicating that sensitivity would be sufficient for measuring species in many industrial separations processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unexpected structural/motional mode of water intercalated into an α-crystalline zirconium phosphate deduced by 31 P and 2 H solid-state MAS NMR spectra

Here, in developing the approach to understanding dynamics of intercalates in layered materials, crystalline-layered zirconium phosphate Zr (HPO 4 ) 2 ·0.35D2O has been prepared and characterized by the 1 H, 31 P, and 2 H solid-state MAS NMR spectra, including 31 P and 2 H T 1 measurements. At temperatures >253 K, the intercalated water shows two spectrally-distinguished deuterons unprecedentedly with different DQCC's and 2 H T 1 times, one of which is hydrogen bonded. The collected data allowed to identify an unexpected bonding/dynamic mode of water molecules, which experience fast rotation around the hydrogen bond, formed with a zirconium-coordinated oxygen. The low-temperature 2 H MAS NMR experiments have demonstrated the presence of additional hydrogen bond P—(H)O˙˙˙ DO, population of which grows on cooling to 195 K corresponding to the doubly hydrogen-bonded immobile water molecule.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗