Search NASA⌕ Search

SEARCH · Search NASA

Results for “research capability development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Semi-span model testing in the national transonic facility

The present work was motivated by an ongoing research program at NASA Langley Research Center to develop a semi-span testing capability for the National Transonic Facility (NTF). This test technique is being investigated as a means to design and optimize high-lift devices at flight Reynolds numbers in a ground test facility. Even though the freestream Mach numbers of interest are around .20, the flow around a transport wing with high lift devices deployed may contain regions of compressible flow. Thus to properly model the flow physics, a compressible flow solver may be required. However, the application of a compressible flow solver at low Mach numbers can be problematic. The objective of this phase of the project is to directly compare the performance of two widely used three-dimensional compressible Navier-Stokes solvers at low Mach numbers to both experimental data and to results obtained from an incompressible Navier-Stokes solver. The geometries of interest are two isolated wings with different leading edge sweep angles. The compressible Navier-Stokes solvers chosen, TLNS3D-MB and CFL3D, which were developed at NASA Langley Research Center (LaRC), represent the current state-of-the-art in compressible 3-D Navier-Stokes solvers. The incompressible Navier-Stokes solver, INS3D-UP, developed recently at NASA Ames Research Center (ARC), represents the current state-of-the-art in incompressible Navier-Stokes solvers.

Chokani, Ndaona↗

ECH Technology Development

Electron Cyclotron Heating (ECH) is needed for plasma heating, current drive, plasma stability control, and other applications in fusion energy sciences research. The program of fusion energy sciences supported by U. S. DOE, Office of Science, Fusion Energy Sciences relies on the development of ECH technology to meet the needs of several plasma devices working at the frontier of fusion energy sciences research. The largest operating ECH system in the world is at DIII-D, consisting of six 1 MW, 110 GHz gyrotrons capable of ten second pulsed operation, plus two newer gyrotrons. The ECH Technology Development research program investigated the options for upgrading the DIII-D 110 GHz ECH system. Options included extending present-day 1 MW technology to 1.3 – 1.5 MW power levels or developing an entirely new approach to achieve up to 2 MW of power per gyrotron. The research consisted of theoretical research and designs conducted by Communication and Power Industries of Palo Alto, CA working with MIT. Results of the study would be validated in a later phase by research on short pulse length gyrotrons at MIT and long pulse / cw gyrotrons in industry. This research follows a highly successful program of development that has led to the highly reliable, six megawatt ECH system at the DIII-D tokamak. Eventually, gyrotrons at the 1.5 megawatt to multi-megawatt power level will be needed for heating and current drive in large scale plasmas including ITER and DEMO.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mobile Computing for Aerospace Applications

The use of commercial computer technology in specific aerospace mission applications can reduce the cost and project cycle time required for the development of special-purpose computer systems. Additionally, the pace of technological innovation in the commercial market has made new computer capabilities available for demonstrations and flight tests. Three areas of research and development being explored by the Portable Computer Technology Project at NASA Ames Research Center are the application of commercial client/server network computing solutions to crew support and payload operations, the analysis of requirements for portable computing devices, and testing of wireless data communication links as extensions to the wired network. This paper will present computer architectural solutions to portable workstation design including the use of standard interfaces, advanced flat-panel displays and network configurations incorporating both wired and wireless transmission media. It will describe the design tradeoffs used in selecting high-performance processors and memories, interfaces for communication and peripheral control, and high resolution displays. The packaging issues for safe and reliable operation aboard spacecraft and aircraft are presented. The current status of wireless data links for portable computers is discussed from a system design perspective. An end-to-end data flow model for payload science operations from the experiment flight rack to the principal investigator is analyzed using capabilities provided by the new generation of computer products. A future flight experiment on-board the Russian MIR space station will be described in detail including system configuration and function, the characteristics of the spacecraft operating environment, the flight qualification measures needed for safety review, and the specifications of the computing devices to be used in the experiment. The software architecture chosen shall be presented. An analysis of the performance characteristics of wireless data links in the spacecraft environment will be discussed. Network performance and operation will be modeled and preliminary test results presented. A crew support application will be demonstrated in conjunction with the network metrics experiment.

Alena, Richard↗

Facilitating Heliophysics Research by the Virtual Wave Observatory (VWO) Context Data Search Capability

Wave phenomena, ranging from freely propagating electromagnetic radiation (e.g., solar radio bursts, AKR) to plasma wave modes trapped in various plasma regimes (e.g., whistlers, Langmuir and ULF waves) and atmospheric gravity waves, are ubiquitous in the heliosphere. Because waves can propagate, wave data obtained at a given observing location may pertain to wave oscillations generated locally or from afar. While wave data analysis requires knowledge of wave characteristics specific to different wave modes, the search for appropriate data for heliophysics wave studies also requires knowledge of wave phenomena. In addition to deciding whether the interested wave activity is electrostatic (i.e., locally trapped) or electromagnetic (with propagation over distances), considerations must be given to the dependence of the wave activity on observer's location or viewing geometry, propagating frequency range and whether the wave data were acquired by passive or active observations. Occurances of natural wave emissions i the magnetosphere (e.g, auroral kilometric radiation) are often dependent also on the state (e.e., context) of the magnetosphere that varies with the changing solar wind, IMF and geomagnetic conditions. Fung and Shao [2008] showed recently that magnetospheric state can be specified by a set of suitably time-shifted solar wind, IMF and the multi-scale geomagnetic response parameters. These parameters form a magnetospheric state vector that provides the basis for searching magnetospheric wave data by their context conditions. Using the IMAGE Radio Plasma Imager (RPI) data and the NASA Magnetospheric State Query System (MSOS) [Fung, 2004], this presentation demonstrates the VWO context data search capability under development and solicits feedback from the Heliophysics research community for improvements.

Fung, Shing F.↗

Computational Methods Development at Ames

This viewgraph presentation outlines the development at Ames Research Center of advanced computational methods to provide appropriate fidelity computational analysis/design capabilities. Current thrusts of the Ames research include: 1) methods to enhance/accelerate viscous flow simulation procedures, and the development of hybrid/polyhedral-grid procedures for viscous flow; 2) the development of real time transonic flow simulation procedures for a production wind tunnel, and intelligent data management technology; and 3) the validation of methods and the flow physics study gives historical precedents to above research, and speculates on its future course.

Kwak, Dochan↗

Northern Rockies Ecological Conservation: Leveraging Earth Observations to Monitor and Predict Populations of Federally Threatened Whitebark Pine (Pinus albicaulis) across the Intermountain West

Whitebark pine (WBP; Pinus albicaulis) is an ecologically important species in North America. As a federally listed threatened species, an understanding of WBP habitat, distribution, and health is important for the natural resource managers of the National Park Service, United States Forest Service, Bureau of Land Management, Fish and Wildlife Service, and non-profit organizations such as the Whitebark Pine Ecosystem Foundation. Previous attempts to develop models of WBP habitat suitability and distribution lack confidence in their validity and integrity for these organizations. The updated models of habitat suitability and distribution developed by this study would provide managers with a capability to be employed in the conservation and future research direction for WBP. Thus, we developed a habitat suitability model of WBP at a high spatial resolution (Landsat 9 Operational Land Image-2, National Land Cover Database, NASA Shuttle Radar Topography Mission; 30m pixels) using a generalized logistic regression with an area under the curve value of 0.754. We extracted spectral reflectance signatures from overlapped ground sample points and Sentinel-2 Multispectral Instrument. The spectral signature analysis indicates WBP is separable from other tree species. We also utilized a visual validation approach and random forest (RF) modeling to separate WBP from limber pine. Through visual validation the RF classifier successfully identified 8out of 10 WBP trees gathered through ground truth points. Additionally, we achieved an overall accuracy of 91%in our confusion matrix for the distribution model using a dependent validation approach. The derived products from this study allow project partners to assess current suitable habitat and apparent health status in areas of identified WBP occurrence, providing data to aid future research regarding WBP health.

Sentinel-2↗

Code Development Supporting a Non-Thermal Source of High Fluence Warm X-Ray

A six-month research effort has advanced the hybrid kinetic-fluid modeling capability required for developing non-thermal warm x-ray sources on Z. The three particle treatments of quasi-neutral, multi-fluid, and kinetic are demonstrated in 1D simulations of an Ar gas puff. The simulations determine required resolutions for the advanced implicit solution techniques and debug hybrid particle treatments with equation-of-state and radiation transport. The kinetic treatment is used in preliminary analysis of the non-Maxwellian nature of a gas target. It is also demonstrates the sensitivity of the cyclotron and collision frequencies in determining the transition from thermal to non-thermal particle populations. Finally, a 2D Ar gas puff simulation of a Z shot demonstrates the readiness to proceed with realistic target configurations. The results put us on a very firm footing to proceed to a full LDRD which includes continued development transition criteria and x-ray yield calculation.

36 MATERIALS SCIENCE↗

Meanline Analysis of Turbines with Choked Flow in the Object-Oriented Turbomachinery Analysis Code

The prediction of turbomachinery performance characteristics is an important part of the conceptual aircraft engine design process. During this phase, the designer must examine the effects of a large number of turbomachinery design parameters to determine their impact on overall engine performance and weight. The lack of detailed design information available in this phase necessitates the use of simpler meanline and streamline methods to determine the turbomachinery geometry characteristics and provide performance estimates prior to more detailed CFD (Computational Fluid Dynamics) analyses. While a number of analysis codes have been developed for this purpose, most are written in outdated software languages and may be difficult or impossible to apply to new, unconventional designs. The Object-Oriented Turbomachinery Analysis Code (OTAC) is currently being developed at NASA Glenn Research Center to provide a flexible meanline and streamline analysis capability in a modern object-oriented language. During the development and validation of OTAC, a limitation was identified in the code's ability to analyze and converge turbines as the flow approached choking. This paper describes a series of changes which can be made to typical OTAC turbine meanline models to enable the assessment of choked flow up to limit load conditions. Results produced with this revised model setup are provided in the form of turbine performance maps and are compared to published maps.

Choked Flow↗

Synthetic Biologic Membrane

The International Space Station (ISS) is a test bed for the technologies that will be used to travel to Mars and beyond. The lessons learned from operating the ISS provide valuable direction to future research and technology development programs. One of the most critical and complicated subsystems on ISS is the life support system. The life support system keeps the crew alive by recycling both air and water. The ISS water recycling system has been operating since 2009 and one of the main lessons learned is that reliability is a key technology performance metric. In the long run reliability is a key cost driver and is a critical factor in insuring crew safety. For long duration missions such as the exploration of Mars, where resupply of spare parts from Earth is difficult if not impossible, reliability is even more important. This presentation will cover research into improving the reliability of ISS systems. It will discuss research into the development of a biomimetic membrane materials that provides self-regeneration capabilities for water recycling systems. It will also cover research into past failures of the ISS water recycling system caused by astronaut bone loss and the build-up of trace contaminates in the cabin.

Biology↗

Advanced Power Electronics and Electric Machines

The advanced power electronics and electric machines (APEEM) research group at the National Renewable Energy Laboratory (NREL) has developed world-class experimental and modeling capabilities for designing and evaluating efficient and reliable power electronics and electric machines thermal management systems. They also design, fabricate and characterize advanced power electronics packaging, and are developing state-of-health monitoring techniques. These researchers deliver safe, reliable, high performing, power-dense components that allow seamless integration between renewable energy sources, electric transportation, and the grid, helping to make widespread electric vehicle (EV) adoption and greenhouse gas emissions reduction more feasible. This document outlines the group's major capabilities in the areas of power electronics; module development and characterization; thermal modeling and management; thermomechanical reliability analysis of devices, modules, inverters/converters, and electric machines; physics-of-failure-based reliability analysis; and microelectronics. It also overviews the group's state-of-the-art equipment for fluid-based thermal management; thermal measurement & characterization; thermomechanical reliability analysis; micro- and power electronics measurement & characterization; and prototype fabrication, as well as the group's world-class modeling and simulation capabilities.

advanced gate drivers↗

The Value of Diversity in the Renewable Energy Industry and Research Community

Part of creating a successful solar industry is developing a capable workforce. It has been repeatedly shown that organizations and companies are more productive when they have diverse and inclusive cultures. The solar industry in the U.S. performs well in some aspects (non-white workforce, positive work environment) but drastically under-performs in many others. We discuss these metrics and how this impacts the renewable energy industry and the solar research community. We highlight some initial actions which are necessary to begin to remediate these deficiencies, such as demographic tracking, recruiting strategies, and mentoring. We also present the historical and ongoing efforts to improve the diversity and inclusion of the Photovoltaic Specialists Conference, particularly through the work of this year’s Diversity and Inclusion (D&I) oversight committee. This year’s D&I committee is implementing diversity tracking, a women’s lunch, a diversity lunch, childcare resources, pronouns on badges, gender-neutral restrooms, addressing accessibility issues, and publishing a diversity statement and code of conduct to the PVSC website.

diversity↗

The Value of Diversity in the Renewable Energy Industry and Research Community

Part of creating a successful solar industry is developing a capable workforce. It has been repeatedly shown that organizations and companies are more productive when they have diverse and inclusive cultures. The solar industry in the U.S. performs well in some aspects (non-white workforce, positive work environment) but drastically under-performs in many others. We discuss these metrics and how this impacts the renewable energy industry and the solar research community. We highlight some initial actions which are necessary to begin to remediate these deficiencies, such as demographic tracking, recruiting strategies, and mentoring. We also present the historical and ongoing efforts to improve the diversity and inclusion of the Photovoltaic Specialists Conference, particularly through the work of this year’s Diversity and Inclusion (D&I) oversight committee. This year’s D&I committee is implementing diversity tracking, a women’s lunch, a diversity lunch, childcare resources, pronouns on badges, gender-neutral restrooms, addressing accessibility issues, and publishing a diversity statement and code of conduct to the PVSC website.

workforce↗

The Value of Diversity in the Renewable Energy Industry and Research Community

Part of creating a successful solar industry is developing a capable workforce. It has been repeatedly shown that organizations and companies are more productive when they have diverse and inclusive cultures. The solar industry in the U.S. performs well in some aspects (non-white workforce, positive work environment) but drastically under-performs in many others. We discuss these metrics and how this impacts the renewable energy industry and the solar research community. We highlight some initial actions which are necessary to begin to remediate these deficiencies, such as demographic tracking, recruiting strategies, and mentoring. We also present the historical and ongoing efforts to improve the diversity and inclusion of the Photovoltaic Specialists Conference, particularly through the work of this year’s Diversity and Inclusion (D&I) oversight committee. This year’s D&I committee is implementing diversity tracking, a women’s lunch, a diversity lunch, childcare resources, pronouns on badges, gender-neutral restrooms, addressing accessibility issues, and publishing a diversity statement and code of conduct to the PVSC website.

Emily Warren↗

UAM Airspace Research Roadmap - Rev. 1.2

The UAM Airspace research roadmap is being developed as a new System Engineering methodology leveraging Model Based System Engineering (MBSE) capabilities to help organize, integrate, and communicate NASA's UAM airspace research, with the goal of evolving UAM airspace to UML-4. It provides a basis for prioritizing and coordinating research efforts, and for integrating results that build towards NASA’s research goals. Version 1.2 is a development version of the roadmap, shared publicly to serve as a focal point for discussion and feedback leading to a future baselined version (v2.0). This version supersedes earlier publications, and will be superseded itself by later versions.

UAM↗

A hydrogen-oxygen rocket engine coolant passage design program (RECOP) for fluid-cooled thrust chambers and nozzles

The design of coolant passages in regeneratively cooled thrust chambers is critical to the operation and safety of a rocket engine system. Designing a coolant passage is a complex thermal and hydraulic problem requiring an accurate understanding of the heat transfer between the combustion gas and the coolant. Every major rocket engine company has invested in the development of thrust chamber computer design and analysis tools; two examples are Rocketdyne's REGEN code and Aerojet's ELES program. In an effort to augment current design capabilities for government and industry, the NASA Lewis Research Center is developing a computer model to design coolant passages for advanced regeneratively cooled thrust chambers. The RECOP code incorporates state-of-the-art correlations, numerical techniques and design methods, certainly minimum requirements for generating optimum designs of future space chemical engines. A preliminary version of the RECOP model was recently completed and code validation work is in progress. This paper introduces major features of RECOP and compares the analysis to design points for the first test case engine; the Pratt & Whitney RL10A-3-3A thrust chamber.

Tomsik, Thomas M.↗

Quench Module Insert Capabilities and Development Test Results

The Quench Module Insert is a directional solidification furnace that will operate in the Materials Science Research Rack (MSRR) on the International Space Station. It will provide high thermal gradient and quench capabilities for processing metals and alloys in microgravity. Numerical analyses and breadboard testing conducted to date show that the QMI can produce an axial temperature gradient approaching 150 C per centimeter in a 1 centimeter diameter aluminum sample with a maximum molten sample temperature of 1100 C. Breadboard testing and analysis have also shown that the quench capabilities of the furnace are sufficient to rapidly solidify at least a 5mm axial portion of a 1 centimeter diameter molten aluminum sample in significantly less than the required 2 seconds and prevent significant backmelt. This paper presents the furnace requirements and capabilities and a status of the associated development testing and analyses.

Carswell, William E.↗

High Efficiency Concentrating Photovoltaic Power System (Cooperative Research and Development Final Report, CRADA Number CRD-07-229)

Using NREL's characterization capabilities, NREL will conduct electrical, optical, and materials characterization on semiconductor samples for concentrator solar cells, grown by both NREL and Boeing-Spectrolab. NREL will also apply its solar cell fabrication expertise to develop advanced, potentially low-cost concentrator solar cell fabrication processes, e.g. improved etching, metallization, coating deposition, isolation, and other processes. NREL will extend its experience with transparent conductive coatings (TCC) to develop terrestrial concentrator cell contacts using these materials. As required, NREL will carry out metalorganic vapor phase epitaxy (MOVPE) growth development of inverted metamorphic multi-junction solar cells and compare with Boeing-Spectrolab's MOVPE growth processes.

14 SOLAR ENERGY↗

Component Development for Alkaline URFCS

Performance, cost, and durability of the catalyst materials are the key factors that govern the commercialization of H 2 -based energy devices such as unitized regenerative fuel cells (URFCs). URFCs offer the advantage of high energy density vs. existing battery systems. In addition, with the use of an alkaline URFC system, lower system costs can be achieved through the use of platinum group metalfree (PGM-free) materials. This project seeks to address the major obstacles faced in URFC systems and establish a URFC technical capability through the strategic partnership between USC and SRNL. The research focuses on the development of low-PGM and PGM-free based bifunctional oxygen catalysts and electrodes, as well as the development of a URFC testing capability at SRNL.

36 MATERIALS SCIENCE↗