Search NASA⌕ Search

SEARCH · Search NASA

Results for “shear testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

High Temperature VARTM of Phenylethynyl Terminated Imides (PETI) Resins

Fabrication of composite structures using vacuum assisted resin transfer molding (VARTM) is generally more affordable than conventional autoclave techniques. Recent efforts have focused on adapting VARTM for the fabrication of high temperature composites. Due to their low melt viscosity and long melt stability, certain phenylethynyl terminated imides (PETI) can be processed into composites using high temperature VARTM (HT-VARTM). However, one of the disadvantages of the current HT-VARTM resin systems has been the high porosity of the resultant composites. For aerospace applications a void fraction of less than 2% is desired. In the current study, two PETI resins, LARCTM PETI-330 and LARCTM PETI-8 have been used to fabricate test specimens using HT-VARTM. The resins were infused into carbon fiber preforms at 260 C and cured between 316 C and 371 C. Modifications to the thermal cycle used in the laminate fabrication have reduced the void content significantly (typically < 3%) for carbon fiber biaxially woven fabric. Photomicrographs of the panels were taken and void contents were determined by acid digestion. For carbon fiber uniaxial fabric, void contents of less than 2% have been obtained using both PETI-8 and PETI-330. Mechanical properties of the panels were determined at both room and elevated temperatures. These include short beam shear and flexure tests. The results of this work are presented herein.

Ghose, Sayata↗

Centaur Standard Shroud (CSS) static limit load structural tests

The structural capabilities of the jettisonable metal shroud were tested and the interaction of the shroud with the Centaur stage was evaluated. A flight-configured shroud and the assemblies of the associated Centaur stage were tested for applied axial and shear loads to flight limit values. The tests included various thermal, pressure, and load conditions to verify localized strength capabilities, to evaluate subsystem performance, and to determine the aging effect on insulation system properties. The tests series verified the strength capabilities of the shroud and of all associated flight assembles. Shroud deflections were shown to remain within allowable limits so long as load sharing members were connected between the shroud and the Centaur stage.

Eastwood, C.↗

New concepts for Reynolds stress transport equation modeling of inhomogeneous flows

The ability to model turbulence near solid walls and other types of boundaries is important in predicting complex engineering flows. Most turbulence modeling has concentrated either on flows which are nearly homogeneous or isotropic, or on turbulent boundary layers. Boundary layer models usually rely very heavily on the presence of mean shear and the production of turbulence due to that mean shear. Most other turbulence models are based on the assumption of quasi-homogeneity. However, there are many situations of engineering interest which do not involve large shear rates and which are not quasi-homogeneous or isotropic. Shear-free turbulent boundary layers are the prototypical example of such flows, with practical situations being separation and reattachment, bluff body flow, high free-stream turbulence, and free surface flows. Although these situations are not as common as the variants of the flat plate turbulent boundary layer, they tend to be critical factors in complex engineering situations. The models developed are intended to extend classical quasi-homogeneous models into regions of large inhomogeneity. These models do not rely on the presence of mean shear or production, but are still applicable when those additional effects are included. Although the focus is on shear-free boundary layers as tests for these models, results for standard shearing boundary layers are also shown.

Perot, J. Blair↗

Graphite/polyimide technology overview and Space Shuttle Orbiter applications

The materials, production processes, testing procedures, and repair techniques for composite structures on the Orbiter are reviewed. The Orbiter currently features graphite/epoxy payload bay doors, as well as graphite/polyimide elevons, vertical tail, and aft body flap, which can withstand up to 600 F temperatures. Graphite/polyimide is also being considered for areas of the baseline aluminum structure and the thermal protection system in order to achieve a 20-30% weight reduction, i.e., over 7.5 tons. An analysis of the allowable stresses on FRC imide thermal protection system tiles bonded directly to the structure has shown satisfactory performances in high temperature and cryogenic conditions, although failure modes are yet to be determined. Ultrasonic emissions have been used for defect detection in nondestructive evaluations, together with tension, notch, shear, and compression tests. Field repairs have not been perfected, and require the evolution of high temperature adhesives that are curable under vacuum pressure and heat blankets.

Morita, W. H.↗

Mixing of the Connecticut River Plume During Ambient Flood Tides: Spatial Heterogeneity and Contributions of Bottom–Generated and Interfacial Mixing

The Connecticut River plume is influenced by energetic ambient tides in the Long Island Sound receiving waters. The objectives of this modeling study are (a) characterizing the spatial heterogeneity of turbulent buoyancy fluxes, (b) partitioning turbulent buoyancy fluxes into bottom-generated and interfacial shear contributions, and (c) quantifying contributions to plume-integrated mixing within the tidal plume. The plume formed during ambient flood tides under low river discharge, spring tides, and no winds is analyzed. Turbulent buoyancy fluxes (B) and depth-integrated B through the plume (Bd) are characterized by pronounced spatial heterogeneity. Strong mixing (Bd ~ 10 –5 -10 –4 m 3 /s 3 ) occurs near the mouth, in the nearfield plume turning region, over shoals, and nearshore shallow areas. Low to moderate mixing (Bd ~ 10 –8 -10 –6 m 3 /s 3 ) occupies half the plume. Buoyancy fluxes are first partitioned based on the depth of the shear stress minimum between plume-generated and bottom-generated shear maxima. Four other tested partitioning methods are based on open channel flow and stratified shear flow parameterizations. Interfacial and bottom-generated shear contribute to different areas of intense and moderate mixing. All methods indicate a significant plume mixing role for bottom-generated mixing, but interfacial mixing is a bigger contributor. Plume-integrated total and interfacial mixing peak at max ambient flood and the timing of peak bottom-generated mixing varies among partitioning methods. Two-thirds of the mixing occurs in concentrated intense mixing areas. A parameter space with the ambient tidal Froude number and plume thickness to depth ratio as axes indicates many tidally modulated plumes are moderately to dominantly influenced by bottom-generated tidal mixing.

54 ENVIRONMENTAL SCIENCES↗

Experimental validation of a two-dimensional shear-flow model for determining acoustic impedance

Tests were conducted to validate a two-dimensional shear-flow analytical model for determining the acoustic impedance of a liner test specimen in a grazing-incidence, grazing-flow environment. The tests were limited to a test specimen chosen to exhibit minimal effects of grazing flow so that the results obtained by using the shear-flow analytical model would be expected to match those obtained from normal-incidence impedance measurements. Impedances for both downstream and upstream sound propagation were generally consistent with those from normal-incidence measurements. However, sensitivity of the grazing-incidence impedance to small measurement or systematic errors in propagation constant varied dramatically over the range of test frequencies.

Parrott, Tony L.↗

Experimental Identification and validation of a crystal plasticity model for a low carbon steel on different length scales

Micro-macro approaches are of increasing importance for metal forming simulations and, accordingly, the number of new micro-macro models is increasing as well. Thus, there is a need for adequate identification and validation methods for such models. These methods can be based on experiments on the polycrystalline scale (macro scale), but the use of experiments on the individual single-crystal grain scale (micro scale) has been suggested as well. In this presentation, experiments on both scales and, in parallel, FEM-simulations are presented, in order to compare the results of both approaches. All specimens stem from a rolled sheet of the deep-drawing steel DC04. In addition to the usual macroscopic shear and tensile tests, microscopic indenter tests have been performed. From the micro-indentation tests, which have been applied to single grains of the polycrystalline DC04 steel sheet, various types of deformation data can be measured. Within this presentation we will focus on orientation changes induced by spherical-indentation in the region below the indent, which have been measured using micron-resolution 3D x-ray microscopy and simulated using FEM. In addition, the sensitivity of the calculated orientation changes with respect to {l_brace}110{r_brace} versus {l_brace}112{r_brace} slip planes is discussed.

36 MATERIALS SCIENCE↗

Compressive strength of fiber reinforced composite materials

Results of an experimental and analytical investigation of the compressive strength of unidirectional boron-epoxy composite material are presented. Observation of fiber coordinates in a boron-epoxy composite indicates that the fibers contain initial curvature. Combined axial compression and torsion tests were conducted on boron-epoxy tubes, and it was shown that the shear modulus is a function of axial compressive stress. An analytical model which includes initial curvature in the fibers and permits an estimate of the effect of curvature on compressive strength is proposed. Two modes of failure which may result from the application of axial compressive stress are analyzed, delamination and shear instability. Based on tests and analysis, failure of boron-epoxy under axial compressive load is due to shear instability.

Davis, J. G., Jr.↗

Compressive strength of fiber-reinforced composite materials

Results of an experimental and analytical investigation of the compressive strength of unidirectional boron-epoxy composite material are presented. Observation of fiber coordinates in a boron-epoxy composite indicates that the fibers contain initial curvature. Combined axial compression and torsion tests were conducted on boron-epoxy tubes and it was shown that the shear modulus is a function of axial compressive stress. An analytical model which includes initial curvature in the fibers and permits an estimate of the effect of curvature on compressive strength is proposed. Two modes of failure which may result from the application of axial compressive stress are analyzed - delamination and shear instability. Based on tests and analysis, failure of boron-epoxy under axial compressive load is due to shear instability.

Davis, J. G., Jr.↗

Fiber/matrix debonding evaluation of SiCf/SiC composites using micropillar compression technique

Third-generation silicon carbide (SiC) composites reinforced by SiC fibers (Hi-Nicalon S [HNS] and Tyranno SA3 [SA3]) are attractive for use in next generation reactors owing to their high strength and chemical inertness at high temperatures, as well as enhanced radiation tolerance under neutron irradiation environments. To optimize composite performance, the interfacial mechanical properties of chemical vapor–infiltrated (CVI) SiC f /SiC composites are investigated in this effort by using a slant interface micropillar compression testing procedure. The micropillar test specimens, containing an inclined pyrolytic carbon (PyC) interphase, are prepared using a focused ion beam. The novel microcompression testing successfully quantifies the debond shear strength and internal friction coefficient of micropillar test samples by using the Mohr-Coulomb formulation. Furthermore, according to four types of SiCf/SiC composite microcompression test results, interfacial properties and debond mechanisms are significantly affected by the PyC layer thickness, the local bonding mechanism of the PyC interphase on the SiC fiber surface, and the surface roughness of fibers. Regardless of PyC thicknesses, SA3-reinforced CVI SiC f /SiC composites are found to have much higher debond shear strengths than HNS-reinforced SiC f /SiC CVI composites. By using this micropillar compression technique alongside analytical methods, we uncover new understandings of PyC interface properties. Additionally, the micropillar test results obtained are correlated with macroscopic mechanical properties of neutron-irradiated CVI SiCf/SiC composites.

42 ENGINEERING↗

A-priori testing of sub-grid models for chemically reacting nonpremixed turbulent shear flows

The beta-assumed-pdf approximation of (Cook & Riley 1994) is tested as a subgrid model for the LES computation of nonpremixed turbulent reacting flows, in the limit of cold infinitely fast chemistry, for two plane turbulent mixing layers with different degrees of intermittency. Excellent results are obtained for the computation of integrals properties such as product mass fraction, and the model is applied to other quantities such as powers of the temperature and the pdf of the scalar itself. Even in these cases the errors are small enough to be useful in practical applications. The analysis is extended to slightly out of equilibrium problems such as the generation of radicals, and formulated in terms of the pdf of the scalar gradients. It is shown that the conditional gradient distribution is universal in a wide range of cases whose limits are established. Within those limits, engineering approximations to the radical concentration are also possible. It is argued that the experiments in this paper are essentially in the limit of infinite Reynolds number.

Jimenez, J.↗

The shear fracture toughness, K IIc , of graphite

In this study, the critical shear stress intensity factor, K IIc , here-in referred to as the shear fracture toughness, K IIc (MPa m), of two grades of graphite are reported. The range of specimen volumes was selected to elucidate any specimen size effect, but smaller volume specimen tests were largely unsuccessful, shear failure did not occur between the notches as expected. This was probably due to the specimen geometry causing the shear fracture stress to exceed the compressive failure stress. In subsequent testing the specimen geometry was altered to reduce the compressive footprint and the notches (slits) made deeper to reduce the specimen's ligament length. Additionally, we added the collection of Acoustic Emission (AE) during testing to assist with the identification of the shear fracture load. The means of K IIc from large specimens for PCEA and NBG-18 are 2.26 MPa m with an SD of 0.37 MPa m and 2.20 MPa m with an SD of 0.53 MPa m, respectively. The value of K IIc for both graphite grades was similar, although the scatter was large. In this work we found the ratio of K IIc / K Ic ≈ 1.6. .

36 MATERIALS SCIENCE↗

Modeling and Testing Miniature Torsion Specimens for SiC Joining Development Studies for Fusion

The international fusion community has designed a miniature torsion specimen for neutron irradiation studies of joined SiC and SiC/SiC composite materials. Miniature torsion joints based on this specimen design were fabricated using displacement reactions between Si and TiC to produce Ti3SiC2 + SiC joints with CVD-SiC and tested in torsion-shear prior to and after neutron irradiation. However, many of these miniature torsion specimens fail out-of-plane within the CVD-SiC specimen body, which makes it problematic to assign a shear strength value to the joints and makes it difficult to compare unirradiated and irradiated joint strengths to determine the effects of the irradiation. Finite element elastic damage and elastic-plastic damage models of miniature torsion joints are developed that indicate shear fracture is likely to occur within the body of the joined sample and cause out-of-plane failures for miniature torsion specimens when a certain modulus and strength ratio between the joint material and the joined material exists. The model results are compared and discussed with regard to unirradiated and irradiated joint test data for a variety of joint materials. The unirradiated data includes Ti3SiC2 + SiC/CVD-SiC joints with tailored joint moduli, and includes steel/epoxy and CVD-SiC/epoxy joints. The implications for joint data based on this sample design are discussed.

Joining:Fusion:Torsion:Modeling and Simulation↗

Enhanced Interfacial Strength in Carbon Fiber Composites via Mussel‐Inspired Sizing Polymers

Composite materials possess a high strength-to-weight ratio. A key determinant of their mechanical performance is the interfacial strength between the fibers and the matrix. Sizing agents are commonly used to improve this interface by promoting better adhesion, though optimizing this interaction remains a significant challenge. Here, this study evaluates the use of poly(catechol-styrene) (PCS), a mussel-inspired sizing agent, to enhance fiber–matrix bonding in carbon fiber composites. Woven carbon fiber laminates were dip-coated with varying concentrations of PCS (0.05 and 0.1 wt%) and subsequently fabricated using vacuum-assisted resin transfer molding followed by compression molding. Interlaminar shear strength (ILSS) tests showed improvements of 4% and 8% for the 0.05% and 0.1% PCS treatments, respectively. These results indicate that PCS is effective in reinforcing interfacial adhesion, thereby improving the mechanical integrity of carbon fiber-reinforced composites.

Carbon fiber composites↗

Characterization and Engineering Properties of Dry and Ponded Class-F Fly Ash

Characterization studies conducted on Class-F fly-ash specimens gathered from different producers in the southeastern United States confirm general trends reported for fly ash worldwide. Further tests and detailed analyses explain the spread in specific gravity (interparticle porosity cenospheres), highlight the tendency to segregation and layering, and show marked ferromagnetism. Furthermore, data show that early diagenetic cementation—within days after wetting—hinders densification and produces a fabric that is prone to collapse. New procedures are particularly developed to diagnose and characterize early diagenesis, including (1) pH measurements as an indicator of diagenetic potential, (2) test protocols to assess early diagenesis using oedometer tests and shear-wave velocity, and (3) procedures to determine realizable unit weights as reference values for the analyses of contractive or dilative tendencies and instability. In the absence of early diagenetic cementation, dilative fly-ash behavior is expected in the upper ≈20 m under monotonic shear loading. Flow instability may follow the failure of the containment structure if the ponded ash is saturated and has experienced hindered densification.

36 MATERIALS SCIENCE↗

Verification of a fully implicit particle-in-cell method for the <!--${MathJax: TeX-AMS-MML_HTMLorMML}--> v &#x2225; -formalism of electromagnetic gyrokinetics in the XGC code

A fully implicit particle-in-cell method for handling the v ∥ -formalism of electromagnetic gyrokinetics has been implemented in XGC. By choosing the v ∥ -formalism, here we avoid introducing the nonphysical skin terms in Ampère's law, which are responsible for the well-known “cancellation problem” in the p ∥ -formalism. The v ∥ -formalism, however, is known to suffer from a numerical instability when explicit time integration schemes are used due to the appearance of a time derivative in the particle equations of motion from the inductive component of the electric field. Here, using the conventional δf scheme, we demonstrate that our implicitly discretized algorithm can provide numerically stable simulation results with accurate dispersive properties. We verify the algorithm using a test case for shear Alfvén wave propagation in addition to a case demonstrating the ion temperature gradient-kinetic ballooning mode (ITG-KBM) transition. The ITG-KBM transition case is compared to results obtained from other δf gyrokinetic codes/schemes, whose verification has already been archived in the literature.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dark Energy Survey Year 3 results: Cosmology from cosmic shear and robustness to modeling uncertainty

Here, this work and its companion paper, Amon et al. [Phys. Rev. D 105, 023514 (2022)], present cosmic shear measurements and cosmological constraints from over 100 million source galaxies in the Dark Energy Survey (DES) Year 3 data. We constrain the lensing amplitude parameter 𝑆 8 ≡𝜎 8 ⁢$\sqrt{Ω_{m}/0.3}$ at the 3% level in Λ⁢ CDM: 𝑆 8 =0.75⁢9$^{+0.025}_{−0.023}$ (68% CL). Our constraint is at the 2% level when using angular scale cuts that are optimized for the Λ⁢ CDM analysis: 𝑆 8 =0.77⁢2$^{+0.018}_{−0.017}$ (68% CL). With cosmic shear alone, we find no statistically significant constraint on the dark energy equation-of-state parameter at our present statistical power. We carry out our analysis blind, and compare our measurement with constraints from two other contemporary weak lensing experiments: the Kilo-Degree Survey (KiDS) and Hyper-Suprime Camera Subaru Strategic Program (HSC). We additionally quantify the agreement between our data and external constraints from the Cosmic Microwave Background (CMB). Our DES Y3 result under the assumption of Λ⁢ CDM is found to be in statistical agreement with Planck 2018, although favors a lower 𝑆 8 than the CMB-inferred value by 2.3⁢𝜎 (a 𝑝-value of 0.02). This paper explores the robustness of these cosmic shear results to modeling of intrinsic alignments, the matter power spectrum and baryonic physics. We additionally explore the statistical preference of our data for intrinsic alignment models of different complexity. The fiducial cosmic shear model is tested using synthetic data, and we report no biases greater than 0.3⁢𝜎 in the plane of 𝑆 8 ×Ω m caused by uncertainties in the theoretical models.

79 ASTRONOMY AND ASTROPHYSICS↗

Electrical and Mechanical Characterizations of Nanocomposite Insulation for HTS Systems

As HTS wire technology continues to advance, a critical need has emerged for dielectric materials that can be used in superconducting components such as terminations, fault current limiters, transformers, and motors. To address this need, CTD is developing nanocomposite insulations based on epoxy and benzoxazine chemistries. Depending on part geometry, some processing methods are more efficient than others. For this reason, CTD is investigating both fiber-reinforced and filled resin systems for use in these applications. A thorough set of electrical testing including AC breakdown, breakdown as a function of thickness, and flashover shows promising performance characteristics. In addition, mechanical testing (short beam shear and compression) indicate that these new materials to have as good or better performance than G10.

Walsh, J K↗