Search NASA⌕ Search

SEARCH · Search NASA

Results for “solar modules”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

NASA welding assessment program

A long duration test has been conducted for comparing various methods of attaching electrical interconnects to solar cells for near Earth orbit spacecraft. Representative solar array modules have been thermally cycled for 36,000 cycles between -80 and +80 C on this JPL and NASA Lewis Research Center sponsored work. This test simulates the environmental stress of more than 6 years on a near Earth spacecraft as it cycles in and out of the Earth's shadow. Evaluations of the integrity of these modules were made by visual and by electrical examinations before starting the cycling and then at periodic intervals during the cycling tests. Modules included examples of parallel gap and of ultrasonic welding, as well as soldering. The materials and fabrication processes are state of the art, suitable for forming large solar arrays of spacecraft quality. The modules survived his extensive cycling without detectable degradation in their ability to generate power under sunlight illumination.

Stofel, E. J.↗
NASA NTRS1983

Hermetic edge sealing of photovoltaic modules

The feasibility of using an electrostatic bonding (ESB) and ultrasonic welding process to produce hermetic edge seals on terrestrial solar cell modules was investigated. The fabrication sequence is to attach an aluminum foil "gasket' to the perimeter of a glass sheet. A cell circuit is next encapsulated inside the gasket, and its aluminum foil back cover is seam welded ultrasonically to the gasket. An ESB process for sealing aluminum to glass was developed in an ambient air atmosphere, which eliminates the requirement for a vacuum or pressure vessel. An ultrasonic seam welding process was also developed which did not degrade the quality of the ESB seal. Good quality welds with minimal deformation were produced. The effectiveness of the above described sealing techniques was tested by constructing 400 sq cm (8 x 8 s64 sq in) sample modules, and then subjecting them to nondestructive fine and gross leak tests. The gross leak tests identified several different causes of leaks which were then eliminated by modifying the assembly process.

Nowlan, M. J.↗
NASA NTRS1988

Varves and solar physics

The relationship between varves (visibly striated rocks deposited by glacial run-off) and solar radiation is discussed, proposing that the thickness of any given varve represents the mean annual sunspot number for the year in which the varve was laid down. The solar cycle may entail a deep torsional oscillator whose influence reaches the surface by wave propagation. Several observed features suggest a wave link between the source of solar activity and its surface manifestations. It is suggested that the cause of varve modulation is solar UV and X-ray radiation, which exerts solar cycle influence in the ozonosphere and ionosphere. The undulations and cycles of the Elatina varve bed formation in South Australia are related to solar phenomena. The varve mechanism is significant for the build-up of the protective shield of biogenic oxygen in the palaeoatmosphere.

Bracewell, R. N.↗
NASA NTRS1990

A status report on the analysis of the NOAA-9 SBUV/2 sweep mode solar irradiance data

Monitoring of the near ultraviolet (UV) solar irradiance is important because the solar UV radiation is the primary energy source in the upper atmosphere. The solar irradiance at wavelengths shortward of roughly 300 nm heats the stratosphere via photodissociation of ozone in the Hartley bands. Shortward of 242 nm the solar UV flux photodissociates O2, which is then available for ozone formation. Upper stratosphere ozone variations coincident with UV solar rotational modulation have been previously reported (Gille et al., 1984). Clearly, short and long term solar irradiance observations are necessary to separate solar-forced ozone variations from anthropogenic changes. The SBUV/2 instrument onboard the NOAA-9 spacecraft has made daily measurements of the solar spectral irradiance at approximately 0.15 nm intervals in the wavelength region 160-405 nm at 1 nm resolution since March 1985. These data are not needed to determine the terrestrial ozone overburden or altitude profile, and hence are not utilized in the NOAA Operational Ozone Product System (OOPS). Therefore, assisted by the ST System Corporation, NASA has developed a scientific software system to process the solar sweep mode data from the NOAA-9 instrument. This software will also be used to process the sweep mode solar irradiance data from the NOAA-11 and later SBUV/2 instruments. An overview of the software system and a brief discussion of analysis findings to date are provided. Several outstanding concerns/problems are also presented.

Cebula, R. P.↗
NASA NTRS1995

A perturbation calculation of the dynamical effects of cosmic rays and interstellar gas on the solar wind

The modulation of galactic cosmic rays and other energetic particles by the solar wind produces a gradient in their pressure, which in turn influences the wind dynamics. The basic equations describing this interaction are presented in the 'hydrodynamic' approximation. A perturbation solution of the equations is presented for the case in which both the galactic cosmic ray pressure, and the pressure of the anomalous cosmic ray component accelerated at the wind termination shock, are small compared with the wind ram pressure. Analytical expressions for the deceleration of the wind and the modification of the shock and its location are derived in this case. These effects are estimated to have a relative magnitude of several percent in the solar wind. The interstellar neutral gas which penetrates the heliosphere is ionized, predominantly by photoionization and charge exchange with the wind, and may also have a significant dynamical effect on the wind. The basic equations describing this interaction are also presented, A perturbation solution is presented under the assumption that the mass loading and momentum-loading of the wind by the interstellar pickup ions is small compared with the wind ram pressure. Analytical expressions for the deceleration of the wind, the contribution of the pickup ions to the wind pressure, and the modification of the termination shock location are derived. Again, with the exception of pickup ion pressure which is large compared with solar wind thermal pressure, the effects are estimated to be several percent in relative magnitude in the solar wind.

Lee, M. A.↗
NASA NTRS1985

Module flammability research

New materials were developed which show promise of fabricating modules that can pass the Underwriter Laboratories Class A burning brand test for fire ratable solar cell modules. It is concluded that fire resistant module design require special high temperature materials and constructions to achieve Class B and Class A ratings. Also, synergisms exist between back surface materials and module configuration.

Sugimura, R. S.↗
NASA NTRS1986

Flat-plate solar array project. Volume 7: Module encapsulation

The objective of the Encapsulation Task was to develop, demonstrate, and qualify photovoltaic (PV) module encapsulation systems that would provide 20 year (later decreased to 30 year) life expectancies in terrestrial environments, and which would be compatible with the cost and performance goals of the Flat-Plate Solar Array (FSA) Project. The scope of the Encapsulation Task included the identification, development, and evaluation of material systems and configurations required to support and protect the optically and electrically active solar cell circuit components in the PV module operating environment. Encapsulation material technologies summarized include the development of low cost ultraviolet protection techniques, stable low cost pottants, soiling resistant coatings, electrical isolation criteria, processes for optimum interface bonding, and analytical and experimental tools for evaluating the long term durability and structural adequacy of encapsulated modules. Field testing, accelerated stress testing, and design studies have demonstrated that encapsulation materials, processes, and configurations are available that meet the FSA cost and performance goals.

Cuddihy, E.↗
NASA NTRS1988

Tests Of Amorphous-Silicon Photovoltaic Modules

Progress in identification of strengths and weaknesses of amorphous-silicon technology detailed. Report describes achievements in testing reliability of solar-power modules made of amorphous-silicon photovoltaic cells. Based on investigation of modules made by U.S. manufacturers. Modules subjected to field tests, to accelerated-aging tests in laboratory, and to standard sequence of qualification tests developed for modules of crystalline-silicon cells.

Ross, Ronald G., Jr.↗
NASA NTRS1985

Gradients and anisotropies of high energy cosmic rays in the outer heliosphere

Previous studies at lower energies have shown that the cosmic ray density gradients vary in space and time, and many authors currently are suggesting that the radial gradient associated with solar cycle modulation is supported largely by narrow barriers which encircle the Sun and propagate outward with the solar wind. If so, the anisotropy is a desirable way to detect spatial gradients, because it can be associated with the local solar wind and magnetic field conditions. With this in mind, the anisotropy measurements made by the UCSD Cerenkov detectors on Pioneers 10 and 11 are studied. It is shown that the local anisotropy varies greatly, but that the long term average is consistent with the global radial gradient measured between two spacecraft over a baseline of many AU.

Fillius, W.↗
NASA NTRS1985

Gradients and anisotropies of high energy cosmic rays in the outer heliosphere

Two cosmic rays which pass through the same point going in opposite directions will, in the absence of scattering and inhomogeneities in the magnetic field, trace helices about adjacent flux tubes, whose centerlines are separated by one gyrodiameter. A directional anisotropy at the point suggests a difference in the number of cosmic rays loading the two flux tubes; that is, a density gradient over the baseline of a gyrodiameter. Previous studies at lower energies have shown that the cosmic ray density gradients vary in time and space. It is suggested that the radial gradient associated with solar cycle modulation is supported largely by narrow barriers which encircle the sun and propagate outward with the solar wind. If so, the anisotropy is a desirable way to detect spatial gradients, because it can be associated with the local solar wind and magnetic field conditions. Anisotropic measurements made by Cerenkov detectors on Pioneers 10 and 11 were studied. It was found that local anisotropy varies greatly, but that the long term average is consistent with the global radial gradient measured between two spacecraft over a baseline of many AU.

Fillius, W.↗
NASA NTRS1987

Jovian electrons at 1 AU - 1978-1984

Data on Jovian electrons sensed with a spectrometer on board the ISEE spacecraft at 1 AU are studied in terms of intensity variations over time and shape and variations of the electron spectra with time. Design and performance features of the electron spectrometer are described. The analyses cover solar cycle modulation of intensity, the synodic intensity modulation, micromodulation over a period of days, and adiabatic deceleration of electrons propagating in the expanding solar wind. Emphasis is placed on the effects of maximum solar activity on Jovian electron emission and propagation, noting a confirmed 13 mos intensity variation in the Jovian electrons.

Moses, Dan↗
NASA NTRS1992

Estimates of solar variability using the solar backscatter ultraviolet (SBUV) 2 Mg II index from the NOAA 9 satellite

The Mg II core to wing index was first developed for the Nimbus 7 solar backscatter ultraviolet (SBUV) instrument as an indicator of solar variability on both solar 27-day rotational and solar cycle time scales. This work extends the Mg II index to the NOAA 9 SBUV 2 instrument and shows that the variations in absolute value between Mg II index data sets caused by interinstrument differences do not affect the ability to track temporal variations. The NOAA 9 Mg II index accurately represents solar rotational modulation but contains more day-to-day noise than the Nimbus 7 Mg II index. Solar variability at other UV wavelengths is estimated by deriving scale factors between the Mg II index rotational variations and at those selected wavelengths. Based on the 27-day average of the NOAA 9 Mg II index and the NOAA 9 scale factors, the solar irradiance change from solar minimum in September 1986 to the beginning of the maximum of solar cycle 22 in 1989 is estimated to be 8.6 percent at 205 nm, 3.5 percent at 250 nm, and less than 1 percent beyond 300 nm.

Cebula, Richard P.↗
NASA NTRS1973

Solar flare cosmic rays at and beyond the modulation boundary.

Consideration of the characteristics of solar flare cosmic ray events observed beyond a postulated modulation boundary, should any such boundary exist. It is pointed out that observations of solar flare particles at great distances from the sun provide a sensitive and precise diagnostic for any such boundary. Such considerations are of substantial interest in view of the probable penetration of deep space probes to distances of the order of 10 AU in the near future.

Jokipii, J. R.↗
NASA NTRS1980

A review of observational evidence for short and long term ultraviolet flux variability of the Sun

Observation of the Sun in the 160 to 400 nm wavelength region reveals no significant broadband variation with solar flares, variability associated with the rotation of active regions, and a possible long term change which may be related to the 11 year sunspot cycle or longer. A continuing ultraviolet solar flux variability below 200 nm was observed from 1969 through the present from satellites, which is modulated at solar rotation rates. Recent observations from Nimbus-7 show the solar flux is varying by significant amounts also in the regions from 200 nm up to the Calcium 2 H-line at 396.8 nm. Typically the flux may vary over a solar rotation from about 10 percent at 160 nm to slightly less than 1 percent at the Ca2 K-line. Results of an evaluation of observations from rockets, satellites, and the ground measurements are discussed.

Heath, D. F.↗
NASA NTRS2013

Interannual Variations of MLS Carbon Monoxide Induced by Solar Cycle

More than eight years (2004-2012) of carbon monoxide (CO) measurements from the Aura Microwave Limb Sounder (MLS) are analyzed. The mesospheric CO, largely produced by the carbon dioxide (CO2) photolysis in the lower thermosphere, is sensitive to the solar irradiance variability. The long-term variation of observed mesospheric MLS CO concentrations at high latitudes is likely driven by the solar-cycle modulated UV forcing. Despite of different CO abundances in the southern and northern hemispheric winter, the solar-cycle dependence appears to be similar. This solar signal is further carried down to the lower altitudes by the dynamical descent in the winter polar vortex. Aura MLS CO is compared with the Solar Radiation and Climate Experiment (SORCE) total solar irradiance (TSI) and also with the spectral irradiance in the far ultraviolet (FUV) region from the SORCE Solar-Stellar Irradiance Comparison Experiment (SOLSTICE). Significant positive correlation (up to 0.6) is found between CO and FUVTSI in a large part of the upper atmosphere. The distribution of this positive correlation in the mesosphere is consistent with the expectation of CO changes induced by the solar irradiance variations.

carbon monoxide↗
NASA NTRS1977

Recent developments in photovoltaic energy by ERDA/NASA-LeRC

Application development activities were designed to stimulate the market for photovoltaics so that as costs are reduced there will be an increasing market demand to encourage the expansion of industrial solar array production capacity. Supporting these application development activities are tasks concerned with: (1) establishing standards and methodology for terrestrial solar cell calibration; (2) conducting standard and diagnostic measurements on solar cells and modules; and (3) conducting real time and accelerated testing of solar cell modules and materials of construction under outdoor sunlight conditions.

Deyo, J. N.↗