Rocket motor spin data
Flight tests of solid propellant rockets in dynamic spin or roll environments
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Flight tests of solid propellant rockets in dynamic spin or roll environments
A composite high-pressure phase diagram for silicon has been predicted for up to 4 TPa. Here, this diagram has been built using a combination of evolutionary algorithm-based structure searches, electronic density functional theory, lattice dynamics of perfect crystals, and anharmonic corrections for the solid state in conjunction with molecular dynamics for evaluating the melt curve. The anharmonic corrections to free energy, arising from both finite-temperature three-phonon interactions and temperature dependence of the lattice axial ratios, play a critical role in properly identifying the solid–solid transition boundaries of the orthorhombic structures. A double hexagonal close-packed structure has been found to be thermodynamically and dynamically stable, sandwiched between the experimentally observed base-centered orthorhombic and hexagonal close-packed structures. In addition, beyond 2.8 TPa, there exists a sequence of face-centered cubic-to-body-centered cubic-to-simple cubic transitions that are accompanied by the localization of electrons in the interstitial spaces between the ions. Supplementing the structural calculations, second- and third-order interatomic force constants were evaluated to compute the phonon vibration modes and linewidths, respectively. This allowed an elaborate analysis of the Raman and infrared spectra for all of the structures of silicon identified so far.
We report the first direct experimental evidence of the dynamic behavior of the solid-electrolyte-interphase (SEI) on copper electrodes upon electrochemical cycling. Synchrotron-based soft X-ray absorption spectroscopy (sXAS) and time-of-flight secondary ion mass spectrometry (TOF-SIMS) consistently show that both the chemical composition and the thickness of the SEI change with electrochemical potential throughout the slow formation process. In particular, sXAS results show that the nascent carbonate species in SEI show redox reversibility and decompose during the delithiation (oxidation) process, which leads to a significant shrinking of the SEI thickness as confirmed by TOF-SIMS. Meanwhile, the carbonates also matures and become more and more inactive at every lithiation (reduction) process. These experimental observations reveal unambiguously that SEI formation is much more complicated than a simple and monotonous deposition of electrolyte decomposition product; instead, it could be an oscillating process with a breathing growth.
Dynamic structural analysis and handling methods evaluation for 260 in. diameter solid rocket motor of Saturn S-4B stage - Vol. 2
Solid-state lithium diffusion dynamics are critical for the rate capability and longevity of Li-ion batteries. Conventionally, nanoscale lithium diffusion within individual battery particles has been simplified as being primarily driven by concentration gradients, despite the associated processes inducing local lattice expansion, contraction, and strain fields. Using operando scanning transmission soft X-ray microscopy with high spatial resolution and chemical sensitivity to track nanoscale intraparticle lithium transport, and post-cycling Bragg coherent diffraction X-ray imaging to directly reveal three-dimensional intraparticle strain fields, we uncover strain-associated lithium transport dynamics within single-crystalline LiNi 1/3 Mn 1/3 Co 1/3 O 2 (scNMC) particles during cycling. Contrary to the expected thermodynamic solid-solution behavior of scNMC, our observations reveal near-uniform but fluctuating regions of lithium-dense and lithium-dilute areas during cycling. These fluctuations suggest that nanoscale lithium diffusion can proceed counter to concentration gradients. Additionally, we demonstrate that an increased presence of lithium-dilute regions near the surface enhances lithium surface insertion kinetics, emphasizing the importance of controlling surface lithium distribution to improve rate performance. Our study provides insights into nanoscale solid-state ion transport, with potential applications in batteries, solid-state fuel cells, and memristors.
Low lithium-ion migration barriers have recently been associated with low average vibrational frequencies or phonon band centers, further helping identify descriptors for superionic conduction. To further explore this correlation, here we present the computational screening of ~14,000 Li-containing compounds in the Materials Project database using a descriptor based on lattice dynamics reported recently to identify new promising Li-ion conductors. An efficient computational approach was optimized to compute the average vibrational frequency or phonon band center of ~1,200 compounds obtained after pre-screening based on structural stability, band gap, and their composition. Combining a low computed Li phonon band center with large computed electrochemical stability window and structural stability, 18 compounds were predicted to be promising Li-ion conductors, one of which, Li 3 ErCl 6 , has been synthesized and exhibits a reasonably high room-temperature conductivity of 0.05–0.3 mS/cm, which shows the promise of Li-ion conductor discovery based on lattice dynamics.
In spite of their growing importance for optoelectronic devices, the fundamental properties and photophysics of molecularly doped organic solids remain poorly understood. Such doping typically leads to a small fraction of free conductive charges, with most electronic carriers remaining Coulombically bound to the ionized dopant. Recently, we have reported photocurrent for devices containing vacuum-deposited TAPC (1,1-bis(4-bis(4- methylphenyl)aminophenyl)cyclohexane) doped with MoO 3 , showing that photoexcitation of charged TAPC molecules increases the concentration of free holes that contribute to conduction. Here, we elucidate the excited-state dynamics of such doped TAPC films to unravel the key mechanisms responsible for this effect. We demonstrate that excitation of different electronic transitions in charged and neutral TAPC molecules allows bound holes to overcome the Coulombic attraction to their MoO 3 counterions, resulting in an enhanced yield of long-lived free carriers. This is caused by ultrafast back-and-forth shuffling of charges and excitation energy between adjacent cations and neutral molecules, competing with relatively slow nonradiative decay from higher excited states of TAPC •+ . The light-induced generation of conductive carriers requires the coexistence of cationic and neutral TAPC, a favorable energy level alignment, and intermolecular interactions in the solid state.
This project partially supported GeoSoilEnviroCARS (GSECARS), a national user facility for frontier research in the earth sciences using synchrotron radiation at the Advanced Photon Source (APS), Argonne National Laboratory, and the foremost synchrotron-based facility dedicated to serving the needs of the geoscience community. The DOE-supported research advanced our knowledge of the composition, structure and properties of earth materials. Frontier experiments were conducted in research areas including mineral-water interface reactions, biogeochemical cycling, flow dynamics of fluids and solids, and projects relevant to applied programs. Examples of these experimental topics include oxygen diffusion in energy-relevant materials, interface structural studies of materials undergoing electrochemical reactions, biogeochemical reactions in aquifers and deep storage reservoirs, reactions in zero-valent iron reactive barriers, and uranium.
Indium phosphide quantum dots (InP QD) are a promising alternative to traditional QD materials that contain toxic heavy elements such as lead and cadmium. However, InP QD obtained from colloidal synthesis are often plagued by poor photoluminescence quantum yields (PL-QYs). In order to improve the PL-QY of InP QD, a number of post-synthetic treatments have been devised. Recently, it has been shown that InP post-synthetically treated with Lewis acid metal divalent cations (M-InP) exhibit enhanced PL-QY; however, the molecular structure and mechanism behind the improved PL-QY are not fully understood. Here, to determine the surface structure of M-InP QD, dynamic nuclear polarization surface-enhanced nuclear magnetic resonance spectroscopy (DNP SENS) experiments were employed on a series of InP magic size clusters treated with Cd ions, InP QD, cadmium phosphide (Cd 3 P 2 ) QD, and Cd-treated InP QD (Cd–InP QD). With the use of DNP SENS, we were able to obtain the 1D 31 P and 113 Cd NMR spectra, 113 Cd{ 31 P} rotational-echo double-resonance (REDOR) NMR spectra, and 31 P{ 113 Cd} dipolar heteronuclear multiple quantum correlation (D-HMQC) sequence. Changes in the phosphide 31 P chemical shifts after Cd treatment provide indirect evidence that some Cd alloys into the sub-surface regions of the particle. DNP-enhanced 113 Cd solid-state NMR spectra suggest that most Cd ions are coordinated by oxygen atoms from either carboxylate ligands or surface phosphate groups. 113 Cd{ 31 P} REDOR and 31 P{ 113 Cd} D-HMQC experiments confirm that a subset of Cd ions are located on the surface of Cd–InP QD and coordinated with phosphate groups.
Here, we present a streamlined method to covalently bond hydroxylated carbon nanotubes (CNOH) within a polyphenol matrix, all achieved through a direct, solvent-free process. Employing an extremely small concentration of CNOH (0.01% w/w) along with topologically contrasting linkers led to a maximum of 5-fold increase in modulus and a 25% enhancement in tensile strength compared to the unaltered matrix, an order of magnitude greater reinforcement (w/w) compared to state-of-the-art melt-processed nanocomposites. Through dynamic mechanical analysis, low field solid-state nuclear magnetic resonance spectroscopy, and molecular dynamics simulations, we uncovered the profound influence of linker’s conformational degrees of freedom on the segmental dynamics and therefore the material’s properties.
The phase diagram of tungsten (W) to a pressure (P) of 2500 GPa is investigated using a comprehensive ab initio approach that includes (i) the calculation of the zero temperature (T) free energies (enthalpies) of different solid structures, (ii) the quantum molecular dynamics simulation of the melting curves of different solid structures, (iii) the derivation of the analytic form for the solid-solid phase transition boundary, and (iv) the simulations of the solidification of liquid W into the final solid states on both sides of the solid-solid phase transition boundary, in order to confirm the corresponding analytic form. There are two solid structures confirmed to be present on the phase diagram of W, the ambient body-centered cubic (bcc) and the high-pressure double hexagonal close-packed (dhcp). At T = 0, the bcc-dhcp transition occurs at 1060 GPa, and the transition boundary has a positive slope dT/dP : the bcc-dhcp-liquid triple point is at (P, T) = (1675 GPa, 23680 K).
NASA's Planetary Geosciences Programs (the Planetary Geology and Geophysics and the Planetary Material and Geochemistry Programs) provide support and an organizational framework for scientific research on solid bodies of the solar system. These research and analysis programs support scientific research aimed at increasing our understanding of the physical, chemical, and dynamic nature of the solid bodies of the solar system: the Moon, the terrestrial planets, the satellites of the outer planets, the rings, the asteroids, and the comets. This research is conducted using a variety of methods: laboratory experiments, theoretical approaches, data analysis, and Earth analog techniques. Through research supported by these programs, we are expanding our understanding of the origin and evolution of the solar system. This document is intended to provide an overview of the more significant scientific findings and discoveries made this year by scientists supported by the Planetary Geosciences Program. To a large degree, these results and discoveries are the measure of success of the programs.
The ubiquity of oxygen in organic, inorganic, and biological systems has stimulated the application and development of 17 O solid-state NMR spectroscopy as a probe of molecular structure and dynamics. Unfortunately, 17 O solid-state NMR experiments are often hindered by a combination of broad NMR signals and low sensitivity. Here, it is demonstrated that fast MAS and proton detection with the D-RINEPT pulse sequence can be generally applied to enhance the sensitivity and resolution of 17 O solid-state NMR experiments. Complete 2D 17 O → 1 H D-RINEPT correlation NMR spectra were typically obtained in less than 10 h from less than 10 mg of material, with low to moderate 17 O enrichment (less than 20%). Two-dimensional 1 H– 17 O correlation solid-state NMR spectra allow overlapping oxygen sites to be resolved on the basis of proton chemical shifts or by varying the mixing time used for 1 H– 17 O magnetization transfer. In addition, J-resolved or separated local field (SLF) blocks can be incorporated into the D-RINEPT pulse sequence to allow the direct measurement of one-bond 1 H– 17 O scalar coupling constants ( 1 J OH ) or 1 H– 17 O dipolar couplings (D OH ), respectively, the latter of which can be used to infer 1 H– 17 O bond lengths. 1 J OH and D OH calculated from plane-wave density functional theory (DFT) show very good agreement with experimental values. Therefore, the 2D 1 H– 17 O correlation experiments, 1 H– 17 O scalar and dipolar couplings, and plane-wave DFT calculations provide a method to precisely determine proton positions relative to oxygen atoms. This capability opens new opportunities to probe interactions between oxygen and hydrogen in a variety of chemical systems.
Nanocrystal (NC) solids are an exciting class of materials, whose physical properties are tunable by choice of the NCs as well as the strength of the interparticle coupling. One can consider these NCs as “artificial atoms” in analogy to the formation of condensed matter from atoms. Akin to atomic doping, the doping of a semiconducting NC solid with impurity NCs can drastically alter its electronic properties. A high degree of complexity is possible in these artificial structures by adjusting the size, shape, and composition of the building blocks, which enables “designer” materials with targeted properties. Here, we present the doping of the PbSe NC solids with a series of Au x Ag 1–x alloy nanoparticles (NPs). A combination of temperature-dependent electrical conductance and Seebeck coefficient measurements and room-temperature Hall effect measurements demonstrates that the incorporation of metal NPs both modifies the charge carrier density of the NC solids and introduces energy barriers for charge transport. These studies point to charge carrier injection from the metal NPs into the PbSe NC matrix. The charge carrier density and charge transport dynamics in the doped NC solids are adjustable in a wide range by employing the Au x Ag 1–x NP with different Au:Ag ratio as dopants. Furthermore, this doping strategy could be of great interest for thermoelectric applications taking advantage of the energy filtering effect introduced by the metal NPs.
Existing methods for the derivation of equations of motion of variable mass systems are reviewed and compared, the end product being a system of general dynamical equations for variable mass systems. These equations are used to study the lateral stability problem associated with the Star 48 solid rocket engine. It is shown that the shape of the combustion chamber could have a significant effect on the lateral stability of the rocket; specifically, a short and wide combustion chamber is destabilizing, while a long and narrow chamber is stabilizing.
Simplicity in chemical composition does not always translate into simplicity in the structures and dynamics of liquids and solids. Some elementary liquid metals, such as gallium, show unusual behaviors in thermodynamic and transport properties as a result of their complex atomic structure and dynamics. Here, in this work, we study the real-space atomic correlation function of liquid gallium by neutron scattering. In the pair-distribution function, there exist two kinds of medium-range order (MRO), characterized by oscillations beyond the first nearest neighbors. On the other hand, the first neighbor shell shows only one kind of bond. The two types of MRO are strongly overlapping in space and fluctuating in time. We propose that they are the basis for anomalous behavior of liquid gallium. This view challenges the current view that liquid gallium consists of fluctuating metallic and insulating domains. These findings shed light on the interpretation of similar microscopic anomalies observed in other semimetallic liquids.
Designing superlattices of nanocrystals to mimic and extend the properties of atomic crystals has been a long-standing motivation in materials chemistry. Interstitial solid solutions, such as steel, are well-studied atomic lattices in which mobile components move among the interstices. These materials exhibit unique properties, including reversible structural changes and phase transitions. Interstitial solid solutions possess unique dynamic structures and reversible responses, which motivate the creation of their colloidal equivalents. Here, in this study, we report a fully thermo-reversible colloidal interstitial solid solution by combining liquid crystals and nanocrystals functionalized with promesogenic ligands. Mesogen molecules fill and diffuse among the interstices of a superlattice, resulting in a super-large thermal expansivity. The approach uses a modular design of interparticle interactions, allowing control of interparticle distance, microstructure and transition between crystallographic forms.
Solid sorbents made of small amine molecules and polyamines infused into mesoporous substrates are promising materials for CO 2 capture technologies. To date, their preparation is mainly based on wet infusion with focus on increasing amine content by varying the structure of the amine sorbent and designing solid substrates of various pore parameters. Less explored in the field are changes in processing to afford efficient CO 2 sorbents. In this study, branched poly(ethylenimine) (bPEI, M w = 800 Da) alone and blends with linear poly(propylenimine) (LPPI, M n = 6,700 Da) are infused into solid SBA-15 substrates by a method that varies the solution processing called sequential polymer infusion into solid substrates (SPISS). The reference 40 % bPEI-SBA-15 samples are split by two methods: split batch in dry suspension (SBD) and split batch in liquid suspension (SBL). Sequentially, alcoholic 10% of bPEI (non-blends) and 10% of LPPI (blends) solutions are introduced to afford the desired products. Under dry conditions, the resulting 50% bPEI-SBA-15 SBD & SBL sorbents display high CO 2 capacities up to 3.47 mmol CO 2 /g SiO 2 for simulated flue gas (10% CO 2 ) and 2.62 mmol CO 2 /g SiO 2 for direct air capture (DAC, 400 ppm CO 2 ). Under humid DAC conditions the CO 2 performance is further enhanced with an uptake of 4.62 mmol CO 2 /gSiO 2 and amine efficiency of 0.22 mmol CO 2 /mmol N. Subjected to extended temperature swing adsorption kinetic cycling (20 cycles), the SPISS samples display stable working capacities and retain over 70% (blends) and over 90% (non-blends) of their initial 12 h adsorption performance. LPPI is demonstrated to be an effective water sorption limiting agent using dynamic vapor sorption measurements. Solid state NMR techniques reveal important insights into the dynamics of the amine polymers confined into SBA-15 pores, as impacted by processing conditions. The results suggest that the conformation of the polymers is different depending on the processing method, displaying relatively tight (SBD) and loose (SBL) packing. Finally, the simple solution processing approaches presented here show that processing variations may guide the design of solid amine sorbents with desirable properties relevant for integration into CO 2 capture technologies.