Ultrafast soft x-ray emission spectroscopy of surface adsorbates using an x-ray free electron laser
Abstract Not Provided
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Abstract Not Provided
Explore the source record for details and available documents.
A simple model is developed to represent the net effect of surface roughness on the microwave emission from soils. The reflectivity of a rough soil surface is defined in a theoretical model that includes both coherent and incoherent reflectivities in terms of the statistical properties of the rough surface, i.e., the surface height standard deviation and its horizontal correlation length. It is shown that the rough surface reflectivity obtained from this theoretical model can be presented in a form that is simply the reflectivity of a smooth surface attenuated by a 'rough thickness'. It is found that the rough thickness can be parameterized as a function of the statistical slope ratio of a rough surface by a simple power-law relationship. Since the slope of a rough surface can be determined experimentally, the rough thickness can be quantitatively estimated from the parametric representation. Model calculations show that this simple model can provide reasonably accurate results of predicted brightness temperatures that agree well with field measurements within experimental uncertainty.
Abstract Investigations into the role of anthropogenic emissions in the occurrence of extreme weather often use a method that compares simulations of atmospheric climate models run under a factual scenario of historical boundary conditions observed during the period of the event against simulations run under a counterfactual scenario of what those boundary conditions might naturally have been over that same period in the absence of anthropogenic emissions. A particular requirement for this experiment design is an accurate estimation of ocean surface boundary conditions for use by the counterfactual natural simulations. Here we use output from the CMIP5 multi‐climate‐model archive to develop a robust estimate of sea surface temperatures and sea ice conditions for use in counterfactual natural simulations, intended as a benchmark estimate to facilitate comparison across climate models and across studies. This development includes tests to ensure that the final estimate is stable from year‐to‐year and stable against other perturbations to the methodology, as well as consideration of the strengths and weaknesses in comparison to other available attributable warming estimates. While this estimate is tailored specifically for the International CLIVAR C20C+ Detection and Attribution Project, it can be used by related projects as well.
Physical mechanisms of electron emission from fibre optic nanotips, namely, tunnelling, multi-photon, and thermionic emission, either prevent fast switching or require intense laser fields. Time-resolved electron emission from nano-sized sources finds applications ranging from material characterisation to fundamental studies of quantum coherence. We present a nano-sized electron source capable of fast-switching (≤1 ns) that can be driven with low-power femtosecond lasers. The physical mechanism that can explain emission at low laser power is surface plasmon enhanced above-threshold photoemission. An electron emission peak is observed and provides support for resonant plasmonic excitation. The electron source is a metal-coated optical fibre tapered into a nano-sized tip. The fibre is flexible and back illuminated facilitating ease of positioning. The source operates with a few nJ per laser pulse, making this a versatile emitter that enables nanometrology, multisource electron-lithography and scanning probe microscopy.
A method for detecting cirrus clouds in terms of brightness temperature differences between narrowbands at 8, 11, and 12 microns has been proposed by Ackerman et al. In this method, the variation of emissivity with wavelength for different surface targets was not taken into consideration. Based on state-of-the-art laboratory measurements of reflectance spectra of terrestrial materials by Salisbury and D'Aria, it is found that the brightness temperature differences between the 8- and 11-microns bands for soils, rocks, and minerals, and dry vegetation can vary between approximately -8 and +8 K due solely to surface emissivity variations. The large brightness temperature differences are sufficient to cause false detection of cirrus clouds from remote sensing data acquired over certain surface targets using the 8-11-12-microns method directly. It is suggested that the 8-11-12-microns method should be improved to include the surface emissivity effects. In addition, it is recommended that in the future the variation of surface emissivity with wavelength should be taken into account in algorithms for retrieving surface temperatures and low-level atmospheric temperature and water vapor profiles.
Incandescent sources that produce light from electrically heated filaments or films tend to feature low efficiencies and offer poor spectral and angular control. We demonstrate that a judicious nanostructuring of a SiC surface can focus thermal emission of a preselected spectral range to a well-defined height above the surface. SiC is known to support electromagnetic surface waves that afford the required thermal emission control. Here, we provide general design rules for this type of focusing element that can be extended to other material systems, such as metals supporting surface plasmon-polariton waves. These rules are verified using full-wave calculations of the spatial variation of thermal emission. Finally, the obtained results establish a foundation for developing more complex algorithms for the design of complex thermal lenses.
A new directional canopy emissivity model (CE-P) based on spectral invariants is proposed in this study. First, we prove the existence of the spectral invariant properties in the thermal infrared (TIR) band using a Monte Carlo model. Based on it, the equation of the new model is derived from the perspective of absorption. In this expression, single-scattering and multiscattering effects are separated analytically in the TIR band. We find that the overall contribution of multiple scatterings is less than 0.005 when the component emissivities are over 0.90, and the overall contribution decreases with increasing leaf or soil emissivity. Furthermore, the new model can avoid the logical difficulty encountered when using the traditional cavity effect factor to simulate the emissivity of a sparse vegetation canopy. The results of 4SAIL and Discrete Anisotropic Radiative Transfer (DART) are selected to do cross validation. The CE-P can achieve a high accuracy compared with 4SAIL and DART, with an absolute bias less than 0.002 when the leaf (soil) emissivity is equal to 0.98 (0.94). Four widely used analytical models are selected for comparison. The resulting accuracies of these models are ordered from CE-P to REN15, FR97, FR02, and VALOR96 with the most serious error up to 0.002, 0.002, 0.007, 0.013, and 0.014, respectively. Finally, three main conclusions are obtained through the sensitivity analysis: the multiscattering between vegetation and the background can be ignored when the leaf (soil) emissivity is no less than 0.94 (0.90), the second and higher order scattering within the vegetation can also be ignored when the leaf (soil) emissivity is no less than 0.94 (0.90), and the single-scattering effect within the canopy should be considered which can be calculated using three view factors.
The secondary electron emission of metals induced by slow ions is characterized in a beam chamber by means of two coaxial semi-cylindrical electrodes with different apertures. The voltages of the outer electrode (screening), inner electrode (collector), and sample holder (target) were set independently in order to measure the effective yield of potential and kinetic electron emissions during ion bombardment. Aluminum samples were exposed to quantified beams of argon ions up to 2000 eV and to oxygen atoms and molecules in order to mimic the plasma-surface interactions on metallic targets during reactive sputtering. The variation of electron emission yield was correlated to the ion energy and to the oxidation state of Al surfaces. This system provides reliable measurements of the electron yields in real time and is of great utility to explore the fundamental surface processes during target poisoning occurring in reactive magnetron sputtering applications.
Molecular contamination of bonding surfaces can drastically affect the bond strength that can be achieved and therefore the structural integrity and reliability of the bonded part. The presence of thin contaminant films on bonding surfaces can result from inadequate or incomplete cleaning methods, from oxide growth during the time between cleaning (such as grit blasting) and bonding, or from failure to properly protect cleaned surfaces from oils, greases, fingerprints, release agents, or deposition of facility airborne molecules generated by adjacent manufacturing or processing operations. Required cleanliness levels for desired bond performance can be determined by testing to correlate bond strength with contaminant type and quantity, thereby establishing the degree of contamination that can be tolerated based on the strength that is needed. Once the maximum acceptable contaminant level is defined, a method is needed to quantitatively measure the contaminant level on the bonding surface prior to bonding to verify that the surface meets the established cleanliness requirement. A photoelectron emission technique for the nondestructive inspection of various bonding surfaces, both metallic and nonmetallic, to provide quantitative data on residual contaminant levels is described. The technique can be used to scan surfaces at speeds of at least 30 ft/min using a servo system to maintain required sensor to surface spacing. The fundamental operation of the photoelectron emission sensor system is explained and the automated scanning system and computer data acquisition hardware and software are described.
We propose a new approach for energy conversion from a dc electric field to tunable terahertz emission based on hybrid semiconductors by combining two-dimensional (2D) crystalline layers and a thick conducting material with possible applications for chemical analysis, security scanning, medical (single-molecule) imaging, and telecommunications. The hybrid nano-structure may consist of a single or pair of sheets of graphene, silicene, or a 2D electron gas. When an electric current is passed through a 2D layer, we discover that two low-energy plasmon branches exhibit a characteristic loop in their dispersion before they merge into an unstable region beyond a critical wave vector q{sub c}. This finite q{sub c} gives rise to a wavenumber cutoff in the emission dispersion of the surface plasmon induced instability and emission of radiation (spiler). However, there is no instability for a single driven layer far from the conductor, and the instability of an isolated pair of 2D layers occurs without a wavenumber cutoff. The wavenumber cutoff is found to depend on the conductor electron density, layer separation, distances of layers from the conductor surface, and the driving-current strength.
Complex structures on a material surface can significantly reduce the total secondary electron emission from that surface. The reduction occurs due to the capture of low-energy, true secondary electrons emitted at one point of the structure and intersecting another. We performed Monte Carlo calculations to demonstrate that fractal surfaces can reduce net secondary electron emission produced by the surface as compared to the flat surface. Specifically, we describe one surface, a “feathered” surface, which reduces the secondary electron emission yield more effectively than other previously considered configurations. Specifically, feathers grown onto a surface suppress secondary electron emission from shallow angles of incidence more effectively than velvet. Here, we find that, for the surface simulated, secondary electron emission yield remains below 20% of its un-suppressed value, even for shallow incident angles, where the velvet-only surface gives reduction factor of only 50%.
The infrared energy emitted from a planetary surface is generated within a finite depth determined by the material's absorption skin depth. This parameter varies significantly with wavelength in the infrared but has an average value of around 50 microns for most geologic materials. In solid rock, heat transfer is efficient enough so that this 50 micron zone of the near surface from which the radiation emanates will be more or less isothermal. In particulate materials, however, heat transfer is more complicated and occurs via a combination of mechanisms, including solid conduction within grains and across grain contacts, conduction through the interstitial gas, and thermal radiation within individual particles and across the void spaces in between grains. On planets with substantial atmospheres, the gas component dominates the heat transfer and tends to mitigate near-surface thermal gradients. However, on airless bodies, the gas component is absent and heat transfer occurs via solid conductions and radiation. If the particles are small relative to the average absorption skin depth, then the top 50-100 microns or so of the surface will be cooled by radiation to space allowing the creation of significant near-surface thermal gradients. In those regions of the spectrum where the absorption coefficient is low, the emission will come from the deeper, warmer parts of the medium, whereas in regions of high absorption, the emission will emanate from shallower, cooler parts of the medium. The resulting emission spectrum will show non-compositional features as a result of the thermal structure in the material. We have modeled the heat transfer in a particulate medium in order to determine the magnitude of near-surface thermal gradients for surfaces on airless bodies and on Mars. We use the calculated thermal structure to determine the effects it has on the infrared emission spectrum of the surface.
In this paper, theoretical and numerical results of the polarimetric scattering and emission from random rough surfaces with anisotropic directional spectrum are presented for the remote sensing of ocean and soil surfaces. The polarimetric scattered field for rough dielectric surfaces is derived to the second order by the small perturbation method (SPM). It is found that the second-order scattered field is coherent in nature, and its coefficients for different polarizations present the lowest-order corrections to the Fresnel reflection coefficients of the surfaces. In addition, the cross-polarized (HV and VH) components of the coherent fields are reciprocal and not zero for surfaces with anisotropic directional spectrum when the azimuth angle of the incident direction is not aligned with the symmetry directions of surfaces. In order to verify the energy conservation condition of the theoretical results, which is important if the theory is to be applied to the passive polarimetry of rough surfaces, a Monte Carlo simulation is performed to numerically calculate the polarimetric reflectivities of one-dimensional random rough surfaces which are generated with a prescribed power-law spectrum in the spectral domain and transformed to the spatial domain by the FFT. The surfaces simulated by this approach are periodic with the period corresponding to the low-wavenumber cutoff. To calculate the scattering from periodic dielectric surfaces, the authors present a new numerical technique which applies the Floquet theorem to reduce the problem to one period and does not require the evaluation of one-dimensional periodic Green's function used in the conventional method of moment formulation. Once the scattering coefficients are obtained, the polarimetric Stokes vectors for the emission from the random surfaces are then calculated according to the Kirchhoff's law and are illustrated as functions of relative azimuth observation and row directions. The second-order SPM is also reduced to this one-dimensional case, and theoretical results for all four Stokes parameters are in excellent agreement with the numerical results obtained from the Monte Carlo simulation. Moreover, the second order coherent fields are found to be necessary for the theoretical evaluation of the third and fourth Stokes parameters. Without that, the reflectivities of random rough surfaces are significantly over-estimated, and the signs of the third and the fourth Stokes parameters are found to be incorrect, if calculated by using the first-order incoherent fields alone.
Cesium ion emission patterns from rear-fed porous refractory metals studied by thermal emission microscope
The equations which describe the emissivity of a rough ocean surface are developed. The theory includes effects of large scale and small scale wave structure and the influence of shadowing by the large ocean waves. Also included are investigations of the emission properties of foam and the influence of the thermal boundary layer on the brightness temperature characteristics of the ocean surface.
A far-infrared interferometer was converted into an emission microspectrophotometer for surface analysis. To cover the mid-infrared as well as the far-infrared the Mylar beamsplitter was made replaceable by a germanium-coated salt plate, and the Moire fringe counting system used to locate the moveable Michelson mirror was improved to read 0.5 micron of mirror displacement. Digital electronics and a dedicated minicomputer were installed for data collection and processing. The most critical element for the recording of weak emission spectra from small areas was, however, a reflecting microscope objective and phase-locked signal detection with simultaneous referencing to a blackbody source. An application of the technique to lubrication problems is shown.