Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface morphologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Surface grain refinement of casting A380 aluminum alloy by ultrasonic-assisted surface mechanical grinding treatment

A novel surface processing technique, ultrasonic-assisted surface mechnical grinding treatment (U-SMGT), was proposed and applied to modify the surface micriostructure of the casting aluminum alloy (A380). Comprehensive post-process chracterization techniques including 3D profilometry, optical microscope, scanning electric microscopy (SEM), and electron backscatter diffraction (EBSD) were carried out to investigate the surface morphology and microstructure of the processed region (PR). It was found that a surface layer of grain refinement with a thickness of about 50 µm was formed. In the as-received base material (BM), large clusters of dendritic eutectic phase with a size of approximately 20 µm were isolated by α-Al matrix. Nano-indentation tests showed that hardness of the eutectic and α-Al in the as-received BM was 2.15 GPa and 1.2 GPa respectively. After U-SMGT, the large dendritic eutectic phase was broken down into much fine particles with an average size of 0.57 µm. These fine particles were uniformly distributed into the α-Al matrix. Nano-indentation measurement exhibited a hardness of 2.27 GPa within the processed region. The overall high hardness in the processed region is a result of the pinning effect of uniformly distributed fine dendrites and grain refinement of Al-matrix.

36 MATERIALS SCIENCE↗

Study of tungsten filament aging in hot-wire chemical vapor deposition with silacyclobutane as a source gas and the H{sub 2} etching effect

The tungsten filament aging when using silacyclobutane (SCB) as a source gas in a hot-wire chemical vapor deposition reactor was systematically studied by the characterization of surface morphology using scanning electron microscopy and the chemical composition analysis of the filament surfaces using Auger electron spectroscopy. It is shown that filament aging involves the formation of silicides and under more severe conditions, a pure silicon deposit. At low pressures of SCB samples, e.g., 0.06 and 0.03 Torr, only Si{sub 3}W{sub 5} alloy was formed. Silicon-rich silicide, Si{sub 2}W, was found when using a higher pressure of SCB at 0.12 Torr. At the high SCB pressure of 0.12 Torr and low temperatures, pure silicon was deposited on the W filament surface. It is also demonstrated that H{sub 2} can etch the aged filament at high temperatures above 1900 deg. C. The etching products detected by the 10.5 eV vacuum ultraviolet laser single photon ionization/time-of-flight mass spectrometer include SiH{sub 4}, SiCH{sub x} (x=2-5), and SiC{sub 2}H{sub y} (y=4-7)

36 MATERIALS SCIENCE↗

Luminal surface fabrication for cardiovascular prostheses

Methodology used for the production of highly ordered surfaces on polytetrafluoroethylene (PTFE) Teflon, for use of this material as a surface layer in small-diameter vascular prostheses, is described. Directed argon-ion beam sputter etching is used to produce highly ordered specific surface morphologies, and photolithographic techniques are used for pattern definition. The methodology also includes surface polishing of the samples, sputter deposition of the intermediary layer of gold to enhance photoresist adhesion and improve pattern resolution, and rotating of the sample to minimize the effects of ion-beam nonuniformity and asymmetry. Use of these techniques resulted in the formation of regular arrays of sharply defined hexagonal pillars with smooth vertical walls and large relief.

Deininger, William D.↗

Internal Characteristics of Phobos and Deimos from Spectral Properties and Density: Relationship to Landforms and Comparison with Asteroids

Compositional interpretations of new spectral measurements of Phobos and Deimos from Mars Express/OMEGA and MRO/CRISM and density measurements from encounters by multiple spacecraft support refined estimates of the moons' porosity and internal structure. Phobos' estimated macroporosity of 12-20% is consistent with a fractured but coherent interior; Deimos' estimated macroporosity of 23-44% is more consistent with a loosely consolidated interior. These internal differences are reflected in differences in surface morphology: Phobos exhibits a globally coherent pattern of grooves, whereas Deimos has a surface dominated instead by fragmental debris. Comparison with other asteroids .110 km in diameter shows that this correspondence between landforms and inferred internal structure is part of a pervasive pattern: asteroids interpreted to have coherent interiors exhibit pervasive, organized ridge or groove systems, whereas loosely consolidated asteroids have landforms dominated by fragmental debris and/or retain craters >1.3 body radii in diameter suggesting a porous, compressible interior.

Murchie, S. L.↗

Electrical Field Effects in Phthalocyanine Film Growth by Vapor Deposition

Phthalocyanine, an organic material, is a very good candidate for non-linear optical application, such as high-speed switching and optical storage devices. Phthalocyanine films have been synthesized by vapor deposition on quartz substrates. Some substrates were coated with a very thin gold film for introducing electrical field. These films have been characterized by surface morphology, material structure, chemical and thermal stability, non-linear optical parameters, and electrical behaviors. The films have excellent chemical and optical stability. However, the surface of these films grown without electrical field shows flower-like morphology. When films are deposited under an electrical field ( an aligned structure is revealed on the surface. A comparison of the optical and electrical properties and the growth mechanism for these films grown with and without an electrical field will be discussed.

Banks, Curtis E.↗

Thermal Annealing Effect on Structure and Properties of Tungsten Surface Irradiated with High Fluence and Low Energy Alpha-Particles

The paper presents research into the surface morphology, helium cluster formation and mechanical properties of high-purity tungsten after the high fluence and low-energy helium ion implantation and subsequent annealing. Investigations are based on scanning electron and atomic force microscopy observations and thermal desorption measurements. Because of the local stresses appearing within the energy loss straggling of helium ions, atoms migrate at distances significantly increasing the ion projective range, and create mobile coalescence of helium atoms and immobile helium-vacancy clusters. The latter form helium bubbles in the energy loss straggling which cause the surface blistering. Local stresses induced by helium coalescence and helium-vacancy clusters beyond the energy loss straggling result in the material strengthening or hardness increase. Subsequent 600°С annealing provides the size growth of blisters on the metal surface irradiated with helium ions and high helium desorption due to the migration of mobile coalescence of helium atoms. With the increasing annealing temperature from 600 to 1000°С, the layer corresponding to the projective range of helium ions fully fractures due to the interstitial helium atoms releasing from immobile helium-vacancy clusters. After 1000°С annealing, the tungsten hardness returns to its initial value.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Etch Characteristics of GaN using Inductively Coupled Cl{sub 2} Plasma Etching

In this study, the plasma characteristics and GaN etch properties of inductively coupled Cl{sub 2}/Ar plasmas were investigated. It has shown that the results of a study of inductively coupled plasma (ICP) etching of gallium nitride by using Cl{sub 2}/Ar is possible to meet the requirement (anisotropy, high etch rate and high selectivity), simultaneously. We have investigated the etching rate dependency on the percentage of Argon in the gas mixture, the total pressure and DC voltage. We found that using a gas mixture with 20 sccm of Ar, the optimum etch rate of GaN was achieved. The etch rate were found to increase with voltage, attaining a maximum rate 2500 A/min at -557 V. The addition of an inert gas, Ar is found to barely affect the etch rate. Surface morphology of the etched samples was verified by scanning electron microscopy and atomic force microscopy. It was found that the etched surface was anisotropic and the smoothness of the etched surface is comparable to that of polished wafer.

36 MATERIALS SCIENCE↗

On the evolution of film roughness during magnetron sputtering deposition

The effect of long-range screening on the surface morphology of thin films grown with pulsed-dc (p-dc) magnetron sputtering is studied. The surface evolution is described by a stochastic diffusion equation that includes the nonlocal shadowing effects in three spatial dimensions. The diffusional relaxation and the angular distribution of the incident particle flux strongly influence the transition to the shadowing growth regime. In the magnetron sputtering deposition the shadowing effect is essential because of the configuration of the magnetron system (finite size of sputtered targets, rotating sample holder, etc.). A realistic angular distribution of depositing particles is constructed by taking into account the cylindrical magnetron geometry. Simulation results are compared with the experimental data of surface roughness evolution during 100 and 350 kHz p-dc deposition, respectively.

36 MATERIALS SCIENCE↗

Chemical bonding, optical constants, and electrical resistivity of sputter-deposited gallium oxide thin films

Gallium oxide (Ga{sub 2}O{sub 3}) thin films were made by sputter deposition employing a Ga{sub 2}O{sub 3} ceramic target for sputtering. The depositions were made over a wide range of substrate temperatures (T{sub s}), from 25 to 600 °C. The effect of T{sub s} on the chemical bonding, surface morphological characteristics, optical constants, and electrical properties of the grown films was evaluated using X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), spectroscopic ellipsometry (SE), and four-point probe measurements. XPS analyses indicate the binding energies (BE) of the Ga 2p doublet, i.e., the Ga 2p{sub 3/2} and Ga 2p{sub 1/2} peaks, are located at 1118.0 and 1145.0 eV, respectively, characterizing gallium in its highest chemical oxidation state (Ga{sup 3+}) in the grown films. The core level XPS spectra of O 1s indicate that the peak is centered at a BE ∼ 531 eV, which is also characteristic of Ga-O bonds in the Ga{sub 2}O{sub 3} phase. The granular morphology of the nanocrystalline Ga{sub 2}O{sub 3} films was evident from AFM measurements, which also indicate that the surface roughness of the films increases from 0.5 nm to 3.0 nm with increasing T{sub s}. The SE analyses indicate that the index of refraction (n) of Ga{sub 2}O{sub 3} films increases with increasing T{sub s} due to improved structural quality and packing density of the films. The n(λ) of all the Ga{sub 2}O{sub 3} films follows the Cauchy's dispersion relation. The room temperature electrical resistivity was high (∼200 Ω-cm) for amorphous Ga{sub 2}O{sub 3} films grown at T{sub s} = RT-300 °C and decreased to ∼1 Ω-cm for nanocrystalline Ga{sub 2}O{sub 3} films grown at T{sub s} ≥ 500–600 °C. A correlation between growth conditions, microstructure, optical constants, and electrical properties of Ga{sub 2}O{sub 3} films is derived.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-resolution simulation of free-surface flow and tracer retention over streambeds with ripples

This study presents a novel high-resolution simulation of free-surface flow and tracer retention over a streambed with ripples based on varying ripple morphologies, surface hydraulics and the transport of a tracer pulse from surface water to surface dead zone. For the simulations, the computational fluid dynamics (CFD) model OpenFOAM was used to solve the three-dimensional Navier-Stokes equations in combination with an implemented transport equation. Pressure gradients at the streambed were used to account for hyporheic exchange, assuming water flow from high pressure zones to low pressure zones. Flow velocities, ripple sizes and spacing showed to significantly affect these pressure gradients, but also the transport of a passive tracer at the streambed, which was not investigated so far. Due to the velocity field, large parts of the tracer mass were transported alongside the main stream above the ripples. Tracer mass reaching the space between the ripples was temporarily retained due to low velocities and recirculations. It was shown that the retention is depending on the ripple size and space between the ripples as well as on the flow velocity. Decreasing ripple sizes and higher flow velocities lead to a smaller tracer retention. Furthermore we showed that the ripple length to height ratio controls the generation of recirculation zones which affect the residence time of the tracer significantly. Ripple spacing leads to temporarily higher tracer concentration at the streambed, but smaller tracer retention. We conclude that the impact of the streambed morphology on the hydraulics in combination with tracer retention should be addressed for a comprehensive understanding of compound movement, exchange and transformation within the hyporheic zone.

54 ENVIRONMENTAL SCIENCES↗

Observation of nanoparticle coalescence during core-shell metallic nanowire growth in colloids via nanoscale imaging

The surface morphology and shape of crystalline nanowires significantly influence their functional properties, including phonon transport, electrocatalytic performance, to name but a few. However, the kinetic pathways driving these morphological changes remain underexplored due to challenges in real-space and real-time imaging at single-particle and atomic resolutions. This study investigates the dynamics of shell (Au, Pd, Pt, Fe, Cu, Ni) deposition on AuAg alloy seed nanowires during core-shell formation. By using chiral/non-chiral seed nanowires, advanced imaging techniques, including liquid-phase transmission electron microscopy (LPTEM), cryogenic TEM, and three-dimensional electron tomography, a three-step deposition process is revealed: heterogeneous nucleation, nanoparticle attachment, and coalescence. It is found that colloidal Ostwald ripening, metal reactivity, and deposition amount modulate nanoparticle size and surface roughness, shaping final morphologies. Noble metal nanoparticles (Au, Ag, Pd, Pt) coalesce with seed nanowire along the 〈111〉 direction, distinct from that of other metals. These findings are consistent across different metals, including Ru, Cu, Fe, and Ni, highlighting the hypothesis of these processes in nanowire formation. These findings enhance traditional crystallographic theories and provide a framework for designing nanowire morphology. Additionally, our imaging techniques may be applied to investigate phenomena like electrodeposition, dendrite growth in batteries, and membrane deformation.

Yang, Dahai↗

Influence of Ga/N ratio on morphology, vacancies, and electrical transport in GaN grown by molecular beam epitaxy at high temperature

The effect of Ga/N flux ratio on surface morphology, incorporation of point defects and electrical transport properties of GaN films grown by plasma-assisted molecular beam epitaxy in a recently developed high-temperature growth regime was investigated. The homoepitaxial (0001) GaN films grown at {approx}780-790 deg. C showed smoothest morphologies near the cross-over between N-rich and Ga-rich growth (0.75<Ga/N<1.1) contrasting previous observations for low-temperature growth. The higher-quality growth near Ga/N{approx}1 resulted from lower thermal decomposition rates and was corroborated by slightly lower Ga vacancy concentrations [V{sub Ga}], lower unintentional oxygen incorporation, and improved electron mobilities. The consistently low [V{sub Ga}], i.e., {approx}10{sup 16} cm{sup -3} for all films attribute further to the significant benefits of the high-temperature growth regime.

36 MATERIALS SCIENCE↗

Growth optimization and optical properties of AlGaNAs alloys

The effect of Al on the surface morphology of chemical beam epitaxy grown AlGaNAs alloys is studied. Pits attributed to N clustering appearing on the dilute nitride surface become smaller, denser, and more uniformly distributed in the presence of Al. This reveals that the introduction of Al results in more homogenous N atoms spatial distribution. A growth temperature study reveals the formation of 3D structures at high temperature due to phase separation. The density of these structures decreases, while their diameter and height increase when the temperature is raised from 380 °C to 565 °C. At growth temperatures in the 380–420 °C range, the phase separation is suppressed and the growth mode is 2D. At 420 °C, the N incorporation is also maximized, making it the optimum temperature. The absorption coefficient and the bandgap of AlGaNAs alloys are extracted from transmittance measurement. A good agreement is obtained between the experimentally measured bandgap and the theoretical values calculated using the band anticrossing model. A bandgap as low as 1.22 eV was reached using Al and N concentrations of ∼15% and ∼3.4%, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Surface and interface of epitaxial CdTe film on CdS buffered van der Waals mica substrate

We report single crystal CdTe films are desirable for optoelectronic device applications. An important strategy of creating films with high crystallinity is through epitaxial growth on a proper single crystal substrate. We report the metalorganic chemical vapor deposition of epitaxial CdTe films on the CdS/mica substrate. The epitaxial CdS film was grown on a mica surface by thermal evaporation. Due to the weak van der Waals forces, epitaxy is achieved despite the very large interface lattice mismatch between CdS and mica (~21–55%). The surface morphology of mica, CdS and CdTe were quantified by atomic force microscopy. The near surface structures, orientations and texture of CdTe and CdS films were characterized by the unique reflection high-energy electron diffraction surface pole figure technique. The interfaces of CdTe and CdS films and mica were characterized by X-ray pole figure technique and transmission electron microscopy. The out-of-plane and in-plane epitaxy of the heteroepitaxial films stack are determined to be CdTe(111)//CdS(0001)//mica(001) and [$\overline{1}2\overline{1}$] CdTe //[$\overline{1}100$] CdS //[010] mica , respectively. The measured photoluminescence (PL), time resolved PL, photoresponse, and Hall mobility of the CdTe/CdS/mica indicate quality films. Finally, the use of van der Waals surface to grow epitaxial CdTe/CdS films offers an alternative strategy towards infrared imaging and solar cell applications.

36 MATERIALS SCIENCE↗

Ambient pressure X-ray photoelectron spectroscopy study of room-temperature oxygen adsorption on Cu(1 0 0) and Cu(1 1 1)

We investigated the room-temperature chemisorption of oxygen on Cu(1 0 0) and Cu(1 1 1) using ambient-pressure X-ray photoelectron spectroscopy (APXPS). A shoulder-to-shoulder comparison between the oxygen-gas titration on the two surfaces reveals that Cu(1 0 0) is the more active for oxygen dissociative chemisorption when the surfaces are clean. The (2 $\sqrt{2}$ × $\sqrt{2}$)R45o missing-row reconstruction appears in Cu(1 0 0)’s LEED image after about 10 4 Langmuir of oxygen exposure, whereas on Cu(1 1 1), no long-range ordering was observed throughout the whole experiment. An oxide layer consisting of cuprous and cupric oxide shows up on Cu(1 1 1) at an oxygen exposure that is significantly lower than for Cu(1 0 0). This observation suggests that the presence of (2 $\sqrt{2}$ × $\sqrt{2}$)R45o missing-row reconstruction layer slows down Cu(1 0 0) oxidation. Literature has widely reported that surface morphology influences the copper oxidation process. This study provides an XPS demonstration that copper surface oxide formation in O 2 at room temperature depends on the surface crystallographic orientation.

36 MATERIALS SCIENCE↗

Growth and characterization of thin oriented Co{sub 3}O{sub 4} (111) films obtained by decomposition of layered cobaltates Na{sub x}CoO{sub 2}

The formation and structural characterization of highly (111)-oriented Co{sub 3}O{sub 4} films prepared by a novel procedure from weakly (001)-oriented Na{sub x}CoO{sub 2} is reported. The Na{sub x}CoO{sub 2} films were deposited on both single crystal and amorphous substrates by chemical solution deposition (CSD) method and crystallized at 700 °C. Subsequently they were transformed into (111)-oriented Co{sub 3}O{sub 4} phase during post-growth annealing at 900 °C. The degree of preferred orientation in Co{sub 3}O{sub 4}, which was determined by phi-scan and pole figure measurements, depends on the content of Na in the starting Na{sub x}CoO{sub 2} phase. Surface morphology of the films was investigated using electron microscopy and atomic force microscopy. - Graphical abstract: Structure of growth twins and possible O{sup 2−} stacking sequences in (111)-oriented Co{sub 3}O{sub 4} thin films on α-Al{sub 2}O{sub 3}(001) prepared by chemical solution deposition through the transformation of (001)-oriented Na{sub x}CoO{sub 2} thin film. - Highlights: • Single phase Co{sub 3}O{sub 4} thin films was prepared by means of chemical solution deposition. • Conditions for γ-Na{sub x}CoO{sub 2} to Co{sub 3}O{sub 4} transformation were optimized. • Growth twinning of Co{sub 3}O{sub 4} films due to two possible O{sup 2−} stacking sequences. • Growth with (pseudo)epitaxial relation Co{sub 3}O{sub 4} (111)[−121]//α-Al{sub 2}O{sub 3} (001)[10−10].

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Protein Adhesion on Semi-Fluorinated Polystyrene Surfaces in Static and Dynamic Measurements

Reducing protein adhesion is a critical strategy in fouling-resistant material innovation, with broad applications spanning biomedical and healthcare devices, biosensors, industrial and environmental systems, and other important technological domains. Here, in this study, we elucidated protein adhesion behavior on polystyrene-based thin films by neutron reflectometry (NR) and quartz crystal microbalance with dissipation (QCM-D), using both lysozyme and bovine serum albumin (BSA) as model proteins. To this end, semifluorinated polystyrene thin films with gradient wettability and surface energy were fabricated through dry processing using plasma oxidation and gas-phase deposition. Although it is believed that a fully fluorinated alkyl chain offers extremely low surface energy, thus rejecting foulants, and has been used in many fouling-resistant surface designs, enhanced protein–surface interactions were observed consistently in NR and QCM-D results, due to the combined effects of surface morphology and chemistry. On the contrary, depositing shorter fluorinated silane onto a hydrophilic PS surface contributed to a more homogeneous nanoscale fluorine coating, resulting in less initial protein adsorption and improved surface recovery. Comparative analysis of proteins with different sizes on the nanopatterned semifluorinated surface revealed the influence of molecular characteristics on surface interactions. Lysozyme, being smaller and more compact, showed faster adsorption kinetics and higher surface coverage but largely reversible binding, whereas BSA, with its larger and more flexible structure, formed broader and more stable interfacial layers. This study fills the gap in understanding protein adhesion within the range of hydrophobicity (water contact angle ∼90°), as current strategies often associate with extreme hydrophilic and superhydrophobic surfaces due to hydration or low-surface-energy rejection mechanisms, respectively. It also provides in-depth insights into current combinatorial fouling-resistant surface design.

Yuan, Yue [Oak Ridge National Laboratory (ORNL), O↗

Scalable Surface Micro-Texturing of LLZO Solid Electrolytes for Battery Applications

A challenge for lithium lanthanum zirconate (LLZO)-based solid-state batteries is to increase the critical current density (CCD) to enable high current cycling. A promising strategy is to modify the LLZO surface morphology to provide a larger contact area with the Li metal. Here, a surface-textured thin LLZO electrolyte was prepared through an easily scalable process. The texturing process is a simple pressing of green LLZO tapes between micro-textured substrates. A variety of textures can be produced, depending on the type of substrate, and texturing can be on either one side or both sides. For this work, after pressing and sintering, several micro-patterns are formed on thin LLZO (~118 μm thick). The properties of the various samples were characterized to investigate the impact of surface texturing, and the most promising ones were selected for electrochemical testing in symmetrical lithium cells and full cells. Li symmetric cells using a coarse ridge-textured LLZO exhibit ~2.5 times increased CCD compared to planar non-textured LLZO, and a solid-state full cell shows stable cycling and improved rate performance. Finally, we believe this process offers a favorable trade-off of processing complexity vs structural optimization to maximize CCD.

25 ENERGY STORAGE↗