Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface reconstructions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34

Small, solubilized platinum nanocrystals consist of an ordered core surrounded by mobile surface atoms

In situ structures of Platinum (Pt) nanoparticles (NPs) can be determined with graphene liquid cell transmission electron microscopy. Atomic-scale three-dimensional structural information about their physiochemical properties in solution is critical for understanding their chemical function. We here analyze eight atomic-resolution maps of small (<3 nm) colloidal Pt NPs. Their structures are composed of an ordered crystalline core surrounded by surface atoms with comparatively high mobility. 3D reconstructions calculated from cumulative doses of 8500 and 17,000 electrons/pixel, respectively, are characterized in terms of loss of atomic densities and atomic displacements. Less than 5% of the total number of atoms are lost due to dissolution or knock-on damage in five of the structures analyzed, whereas 10–16% are lost in the remaining three. Less than 5% of the atomic positions are displaced due to the increased electron irradiation in all structures. The surface dynamics will play a critical role in the diverse catalytic function of Pt NPs and must be considered in efforts to model Pt NP function computationally.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Upgrading the Performance and Stability of Lithium, Manganese-Rich Layered Oxide Cathodes with Combined-Formic Acid and Spinel Coating Treatment

We report improving sluggish rate performance and cycling stability of Li, Mn-rich cathode materials (LMR) is of great importance for practical implementation. Here, dual surface modification on LMR particles with formic acid washing and spinel coating improves the electrochemical performance. Dilute formic acid can remove the Li2CO3 surface impurities and selectively reduce Ni while significantly increasing specific surface area by ~32 %, unlocking more electrochemically active surfaces. Spinel coating enhances cycle stability by suppressing detrimental side reactions at electrode-electrolyte interfaces at high voltage. Post-annealing temperature was found to significantly affect the cathode performance. Higher temperature favors diffusion of transition metal (TM)/Li ions of the spinel coating from surface to the bulk, removing the coating by possible reconstruction into the layered structure and thus degrading the performance. The spinel coating also appears to increase Co 3+ segregation on the particle surface. Compared to the original material, the optimized sample demonstrates 47 % higher capacity retention at 3C and retains 89 % of initial capacity after 150 cycles at 0.5C. Besides, the specific energy density of 523 Wh kg -1 can be attained after 150 cycles at 0.5C. Moreover, the post-cycling analysis of modified sample verifies a better structural integrity with less particle cracking. Altogether, this study portrays an alternative strategy to overcome the shortcomings of LMR cathode materials.

25 ENERGY STORAGE↗

Oxygen and sulfur adsorption on vicinal surfaces of copper and silver: Preferred adsorption sites

We present an extensive density functional theory (DFT) study of adsorption site energetics for oxygen and sulfur adsorbed on two vicinal surfaces of Cu and Ag, with the goal of identifying the most stable adsorption site(s), identifying trends and common themes, and comparing with experimental work in the literature where possible. We also present benchmark calculations for adsorption on the flat (111) and (100) surfaces. The first vicinal surface is the (211), and results are similar for both metals. Here, we find that the step-doubling reconstruction is favored with both adsorbates and is driven by the creation of a special stable fourfold hollow (4fh) site at the reconstructed step. Zig-zag chain structures consisting of X–M–X units (X = chalcogen, M = metal) at the step edge are considered, in which the special 4fh site is partially occupied. The zig-zag configuration is energetically competitive for oxygen but not sulfur. DFT results for oxygen agree with experiment in terms of the stability of the reconstruction, but contradict the original site assignment. The second vicinal surface is the (410), where again results are similar for both metals. For oxygen, DFT predicts that step sites are filled preferentially even at lowest coverage, followed by terrace sites, consistent with the experiment. For sulfur, in contrast, DFT predicts that terrace sites fill first. Oxygen forms O–M–O rows on the top edge of the step, where it occupies incomplete 4fh sites. This resolves an experimental ambiguity in the site assignment. Finally, for both the (211) and (410) surfaces, the interaction energy that stabilizes the X–M–X chain or row correlates with the linearity of the X–M–X unit, which may explain key differences between oxygen and sulfur.

36 MATERIALS SCIENCE↗

Modeling of Non-Spherical Droplet Dynamics

A two-dimensional time-dependent computer code based on the modified Arbitrary Lagrangian Eulerian (ALE) technique, has been developed to simulate non-spherical droplet dynamics and evaporation under convective flows at real rocket combustion chamber conditions. The equations of mass, momentum, energy and species are simultaneously solved for both liquid and gas phases with an accurate dynamic interface tracking. The jump boundary conditions across the deforming droplet surface are obtained by applying the integral forms of conservation of mass, momentum, and energy. At each time step, the interface geometry and flow properties at the droplet surface are implicitly solved by satisfying the interface boundary conditions. A Lagrangian technique was developed to track the arbitrarily moving interface between the liquid droplet and the external gas. An elliptic grid generator is adopted to dynamically reconstruct grids both inside and outside the droplet surface. This code has been used to study droplet oscillation, droplet deformation/breakup, nonspherical droplet evaporation in both low and high pressure convective flows. This presentation briefly describes the numerical algorithm for modeling of the nonspherical droplet dynamics and demonstrates the representative simulation results of nonspherical droplet evaporation at low and high pressure convective flows. Potential applications of this code to rocket combustor design and performance predictions are discussed.

Deng, Zheng-Tao↗

Dynamics of the Antarctic Circumpolar Current. Evidence for Topographic Effects from Altimeter Data and Numerical Model Output

Geosat altimeter data and numerical model output are used to examine the circulation and dynamics of the Antarctic Circumpolar Current (ACC). The mean sea surface height across the ACC has been reconstructed from height variability measured by the altimeter, without assuming prior knowledge of the geoid. The results indicate locations for the Subantarctic and Polar Fronts which are consistent with in situ observations and indicate that the fronts are substantially steered by bathymetry. Detailed examination of spatial and temporal variability indicates a spatial decorrelation scale of 85 km and a temporal e-folding scale of 34 days. Empirical Orthogonal Function analysis suggests that the scales of motion are relatively short, occuring on 1000 km length-scales rather than basin or global scales. The momentum balance of the ACC has been investigated using output from the high resolution primitive equation model in combination with altimeter data. In the Semtner-Chervin quarter-degree general circulation model topographic form stress is the dominant process balancing the surface wind forcing. In stream coordinates, the dominant effect transporting momentum across the ACC is bibarmonic friction. Potential vorticity is considered on Montgomery streamlines in the model output and along surface streamlines in model and altimeter data. (AN)

Gille, Sarah T.↗

The Reliability of Hybrid Functionals for Accurate Fundamental and Optical Gap Prediction of Bulk Solids and Surfaces

Hybrid functionals have been considered insufficiently reliable for the prediction of band gaps in solids and surfaces. We revisit this issue with a new generation of optimally tuned range-separated hybrid functionals, focusing on the reconstructed Si(111)-(2×1) and Ge(111)-(2×1) surfaces. We show that certain hybrid functionals can accurately predict the surface-state and bulk fundamental and optical gaps, as well as projected band structures of these surfaces, by combining ground-state and time-dependent density functional theory.

Sagredo, Francisca↗

Event Reconstruction in the NOvA Experiment

The NOvA experiment observes oscillations in two channels (electron-neutrino appearance and muon-neutrino disappearance) using a predominantly muon-neutrino NuMI beam. The Near Detector records multiple overlapping neutrino interactions in each event and the Far Detector has a large background of cosmic rays due to being located on the surface. The oscillation analyses rely on the accurate reconstruction of neutrino interactions in order to precisely measure the neutrino energy and identify the neutrino flavor and interaction mode. Similarly, measurements of neutrino cross sections using the Near Detector require accurate identification of the particle content of each interaction. A series of pattern recognition techniques have been developed to split event records into individual spatially and temporally separated interactions, to estimate the interaction vertex, and to isolate and classify individual particles within the event. This combination of methods to achieve full event reconstruction in the NOvA detectors has discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Ambient pressure X-ray photoelectron spectroscopy study of room-temperature oxygen adsorption on Cu(1 0 0) and Cu(1 1 1)

We investigated the room-temperature chemisorption of oxygen on Cu(1 0 0) and Cu(1 1 1) using ambient-pressure X-ray photoelectron spectroscopy (APXPS). A shoulder-to-shoulder comparison between the oxygen-gas titration on the two surfaces reveals that Cu(1 0 0) is the more active for oxygen dissociative chemisorption when the surfaces are clean. The (2 $\sqrt{2}$ × $\sqrt{2}$)R45o missing-row reconstruction appears in Cu(1 0 0)’s LEED image after about 10 4 Langmuir of oxygen exposure, whereas on Cu(1 1 1), no long-range ordering was observed throughout the whole experiment. An oxide layer consisting of cuprous and cupric oxide shows up on Cu(1 1 1) at an oxygen exposure that is significantly lower than for Cu(1 0 0). This observation suggests that the presence of (2 $\sqrt{2}$ × $\sqrt{2}$)R45o missing-row reconstruction layer slows down Cu(1 0 0) oxidation. Literature has widely reported that surface morphology influences the copper oxidation process. This study provides an XPS demonstration that copper surface oxide formation in O 2 at room temperature depends on the surface crystallographic orientation.

36 MATERIALS SCIENCE↗

Geometric surprises in the Python's lunch conjecture

A bulge surface, on a time reflection-symmetric Cauchy slice of a holographic spacetime, is a non-minimal extremal surface that occurs between two locally minimal surfaces homologous to a given boundary region. According to the python’s lunch conjecture of Brown et al., the bulge’s area controls the complexity of bulk reconstruction, in the sense of the amount of post-selection that needs to be overcome for the reconstruction of the entanglement wedge beyond the outermost extremal surface. We study the geometry of bulges in a variety of classical spacetimes, and discover a number of surprising features that distinguish them from more familiar extremal surfaces such as Ryu-Takayanagi surfaces: they spontaneously break spatial isometries, both continuous and discrete; they are sensitive to the choice of boundary infrared regulator; they can self-intersect; and they probe entanglement shadows, orbifold singularities, and compact spaces such as the sphere in AdS _p× S^q p × S q . These features imply, according to the python’s lunch conjecture, novel qualitative differences between complexity and entanglement in the holographic context. We also find, surprisingly, that extended black brane interiors have a non-extensive complexity; similarly, for multi-boundary wormhole states, the complexity pleateaus after a certain number of boundaries have been included.

Physics↗

Improved Spatiotemporal Representativeness and Bias Reduction of Satellite-Based Evapotranspiration Retrievals via Use of In Situ Meteorology and Constrained Canopy Surface Resistance

Evapotranspiration (ET) is a key component of the atmospheric and terrestrial water and energy budgets. Satellite-based vegetation index approaches have used remotely-sensed vegetation and reanalysis meteorological properties with surface energy balance models to estimate global ET (MOD16 ET). We reconstructed satellite retrievals using in situ meteorology (Argonne-ET) and evaluated them using a dense network of surface turbulent heat flux measurements. Argonne-ET resolves spatial heterogeneity of ET across the U.S. Southern Great Plains that is not well characterized by MOD16; MOD16 ET exhibits spatial autocorrelation (Moran's I (MI) significantly > 0 in May – Aug.), whereas in situ and Argonne-ET exhibit characteristics of a random spatial process (MI not significantly different from 0). The skill in resolving ET temporal variability is not significantly different between MOD16 and Argonne-ET (correlation coefficient = 0.75 and 0.72, respectively). However, the root mean square errors were significantly lower for Argonne-ET (36 W m -2 ) than MOD16 (43 W m -2 ), and MOD16 exhibits substantial bias in annual ET relative to in situ measurements (-38%). This is attributed to overestimation in the dry canopy surface resistance (rs) parameterization. Using rs constrained to the range of typical measured values, Argonne-ET substantially reduces the bias in the annual ET (+1%). The improved ET estimates are critical for regional water budget analyses. The methodology presented herein also demonstrates the ability to retrieve high temporally resolved (30-min; cf. 8-day MOD16) ET that can be used for development of processed-based diagnostics of model biases, and to elucidate avenues to improve ET model parameterizations.

54 ENVIRONMENTAL SCIENCES↗

Timing and duration of hydrological transitions in Arctic polygonal ground from stable isotopes

Land surface models and Earth system models that include Arctic landscapes must capture the abrupt hydrological transitions that occur during the annual thaw and deepening of the active layer. In this work, stable water isotopes (δ 2 H and δ 18 O) are used to appraise hydrologically significant transitions during annual landscape thaw at the Barrow Environmental Observatory (Utqia&#289vik, Alaska). These hydrologically significant periods are then linked to annual shifts in the landscape energy balance, deduced from meteorological data and described by the microclimatic periods: Winter, Pre-Melt, Melt, Post-Melt, Summer, and Freeze-Up. The tight coupling of the microclimatic periods with the hydrological transitions supports the use of microclimatic periods as a means of linking polygonal surface water hydrology to meteorological datasets, which provides a mechanism for improving the representation of polygonal surface water hydrology in process-based models. Rayleigh process reconstruction of the isotopic changes revealed that 19% of winter precipitation was lost to sublimation prior to melting and that 23% of surface water was lost to evaporation during the first 10 days post-melt. This agrees with evaporation rates reported in a separate study using an eddy covariance flux tower located nearby. An additional 17% was lost to evaporation during the next 33 days. Stable water isotopes are also used to identify the dominant sources of surface water to various hydrogeomorphological features prevalent in polygonal terrain (a lake, a low centre polygon centre, troughs within the rims of low centre polygons, flat centre polygon troughs, a high centre polygon trough, and drainages). Hydrogeomorphologies that retained significant old water or acted as snow drifts are isotopically distinct during the Melt Period and therefore are easily distinguished. Finally, biogeochemical changes related to the annual thaw are also reported and coupled to the hydrological transitions, which provides insight into the sources and sinks of these ions to and from the landscape.

stable water isotopes↗

Neural Radiance Fields for Shadow Removal and Relighting of Satellite Imagery

Multi-view stereo photogrammetric techniques have been conventionally utilized to generate Global Digital Elevation Models (GDEM) of planetary and lunar surfaces. However, these methods, relying on conventional feature detectors, are often subject to inaccuracies caused by changes in lighting conditions, including diffuse reflection and harsh shading. This has limited the ability of these methods to accurately reconstruct shadowed regions in orbital imagery, such as highly shaded urban areas and the permanently shadowed regions (PSRs) located in the lunar surface, which are critical targets for NASA's Artemis program. Neural Radiance Fields (NeRFs) offer a novel solution to these limitations by breaking away from traditional photogrammetric assumptions of ridged, opaque surfaces. NeRFs are capable of reconstructing 3D objects with variably transmissive properties, such as fluids, PSRs, and reflective surfaces. In this work, we demonstrate the robustness of NeRFs in generating high-fidelity 3D models of terrain from highly shaded orbital imagery acquired from small satellites in low earth orbit (LEO). Our results showcase the ability of NeRF to overcome the limitations of traditional photogrammetric methods and provide a promising solution for reconstructing complex scenes in challenging lighting conditions.

Caleb Ashmore Adams↗

AutoTandemML: Active Learning Enhanced Tandem Neural Networks for Inverse Design Problems

Inverse design in science and engineering involves determining optimal design parameters that achieve desired performance outcomes, a process often hindered by the complexity and high dimensionality of design spaces, leading to significant computational costs. To tackle this challenge, we propose a novel hybrid approach that combines active learning with Tandem Neural Networks to enhance the efficiency and effectiveness of solving inverse design problems. Active learning allows to selectively sample the most informative data points, reducing the required dataset size without compromising accuracy. We investigate this approach using three benchmark problems: airfoil inverse design, photonic surface inverse design, and scalar boundary condition reconstruction in diffusion partial differential equations. We demonstrate that integrating active learning with Tandem Neural Networks outperforms standard approaches across the benchmark suite, achieving better accuracy with fewer training samples.

97 MATHEMATICS AND COMPUTING↗

Theoretical constraints on the effects of added cations on clumped, oxygen, and carbon isotope signatures of dissolved inorganic carbon species and minerals

Carbonate clumped isotope thermometry has emerged as a useful tool for the reconstruction of precipitation temperatures for minerals from surface and subsurface environments. Few studies have examined the impact of variable solution chemistry and mineral chemistry on clumping. Therefore, we used theoretical calculations to predict the impact of the presence of cations in a solution on the equilibrium clumped, oxygen ( 18 O/ 16 O and 17 O/ 16 O, θ and κ), and carbon isotopic ( 13 C/ 12 C) compositions of dissolved inorganic carbon species (DIC), and the impact of cation type and stoichiometry on carbonate mineral composition within the calcite-dolomite-magnesite solid solution. We examined the impact of the presence of Mg 2+ , K + , Na + , and Ca 2+ on equilibrium Δ 63 values of carbonate ion groups in DIC species and the composite DIC pool using the B3LYP/6-311++G(2d, 2p) model. We developed new cluster models for dolomite, magnesite, and high-magnesium calcite (Ca 0.83 Mg 0.17 )CO 3 and (Ca 0.67 Mg 0.33 )CO 3 ) and examined the effect of extraneous cations substituted into the crystal lattices of the carbonate minerals. We find the presence of added cations in the DIC pool increases equilibrium Δ 63 values slightly, depending upon their solution concentrations. For the cations examined, the identity of the added cation does not seem to be significant. Cumulative effects may account for small-scale differences (<0.02‰) but are unlikely to be substantial unless cation/anion association and ion pairing are important in the solution that carbonates are growing from. We also find that at a given temperature, stoichiometric dolomite and magnesite Δ 63 values are similar to calcite and less than aragonite. Surprisingly, substitution of an extraneous cation into a carbonate mineral (e.g., as observed in high-magnesium calcite) generally lowered Δ 63 by a slight amount, which suggests that high and low-magnesian calcites may have resolvable differences in equilibrium clumped isotope signatures, potentially providing an explanation for observations of different Δ 47 values in slow-growing minerals. These results imply the cationic composition of the solution may be a minor factor that should be considered for crystals that rapidly grow from solution, and that cationic substitution into carbonate mineral lattices will influence equilibrium compositions of carbonate minerals. Solution chemistry effects on mineral composition are likely to be observed at high growth rates. In contrast, equilibrium isotope compositions arising from cationic substitution in minerals, such as differences between high-Mg calcite and low-Mg calcite, or high-Mg calcite and dolomite, would likely be observed at slow growth rates.

58 GEOSCIENCES↗

Effect of Annealing on Direct Recycled NMC Cathodes

A substantial number of electric vehicle batteries are poised to reach end-of-life conditions in the next decade. Direct recycling has advantages over typical recycling processes because it preserves the chemical structure of the material. One key step of direct recycling materials like nickel manganese cobalt oxide (NMC) cathodes is relithiation, which includes replacing the depleted lithium inventory in the cathode and annealing the material to fix crystallographic degradation. This work uses multiple characterization techniques (synchrotron X-ray diffraction, Ni X-ray absorption near edge structure, scanning transmission electron microscopy) to understand the lithiation mechanism of degraded and chemically relithiated NMC 622. Despite the necessary reconstruction after relithiation being limited to the surface of the degraded NMC 622, a high annealing temperature of 720 °C is still necessary to restore the NMC 622 structure back to pristine condition after relithiation. This work also finds that treating degraded NMC 622 with an annealing step is sufficient to restore key electrochemical and structural properties, other essential features of pristine NMC 622 material such as particle porosity and morphology are largely unaffected. Understanding the effect of this annealing step has important implications on defining the degree of success of any given direct recycling strategy.

36 MATERIALS SCIENCE↗

Finding pythons in unexpected places

In this work, we argue that novel (highly nonclassical) quantum extremal surfaces (QESs) play a crucial role in reconstructing the black hole interior even for isolated, single-sided, non-evaporating black holes (i.e. with no auxiliary reservoir). Specifically, any code subspace where interior outgoing modes can be excited will have a QES in its maximally mixed state. We argue that as a result, reconstruction of interior outgoing modes is always exponentially complex. Our construction provides evidence in favor of a strong python’s lunch proposal: that nonminimal QESs are the exclusive source of exponential complexity in the holographic dictionary. We also comment on the relevance of these QESs to the geometrization of state dependence in the typicality arguments for firewalls.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Artificial Intelligence for imaging Cherenkov detectors at the EIC

Abstract Imaging Cherenkov detectors form the backbone of particle identification (PID) at the future Electron Ion Collider (EIC). Currently all the designs for the first EIC detector proposal use a dual Ring Imaging CHerenkov (dRICH) detector in the hadron endcap, a Detector for Internally Reflected Cherenkov (DIRC) light in the barrel, and a modular RICH (mRICH) in the electron endcap. These detectors involve optical processes with many photons that need to be tracked through complex surfaces at the simulation level, while for reconstruction they rely on pattern recognition of ring images. This proceeding summarizes ongoing efforts and possible applications of AI for imaging Cherenkov detectors at EIC. In particular we will provide the example of the dRICH for the AI-assisted design and of the DIRC for simulation and particle identification from complex patterns and discuss possible advantages of using AI.

Instruments & Instrumentation↗

Diffeomorphism Group Representations in Relativistic Quantum Field Theory

We explore the role played by the di eomorphism group and its unitary representations in relativistic quantum eld theory. From the quantum kinematics of particles described by representations of the di eomorphism group of a space-like surface in an inertial reference frame, we reconstruct the local relativistic neutral scalar eld in the Fock representation. An explicit expression for the free Hamiltonian is obtained in terms of the Lie algebra generators (mass and momentum densities). We suggest that this approach can be generalized to elds whose quanta are spatially extended objects.

74 ATOMIC AND MOLECULAR PHYSICS↗