Search NASA⌕ Search

SEARCH · Search NASA

Results for “waste processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Radioisotope Analysis of Wastewater from Livermore Site Retention Tanks by Gel Laboratory Gross Alpha, Gross Beta and Tritium Sampling Method

Lawrence Livermore National Laboratory discharged approximately 4.4% of the City of Livermore’s total wastewater in 2022 (LLNL’s Annual Site Environmental Report, Chapter 5, 2022). This volume includes wastewater from Sandia National Laboratories (SNL) and some process wastewater from Site 300. Due to the high volume and constituents of the discharge, LLNL works alongside the City of Livermore under permit #1250, requiring wastewater generated to be monitored and sampled in accordance with permit limits. Process wastewater, from buildings with the highest risk to sewer, is collected by wastewater retention tanks throughout the Livermore Site and sampled prior to discharge. Domestic wastewater directly discharges to sanitary sewer. To maintain permit requirements and ensure proper wastewater discharge practices, an internal wastewater audit was conducted during the summer of 2023. Current wastewater practices, regulatory knowledge and risk management across various Livermore Site buildings were evaluated. Workspaces connected to a wastewater retention tank and sanitary sewer drains were major focus areas. Data collected from walk-throughs prompted further evaluation as many practices were reported to be done based on historical usage. A table of concerns was created to showcase reasons for auditing and proceeding action. An analysis of current and historical retention tank usage throughout LLNL Livermore Site buildings with radioisotope results over a 5-year period from 2019 to 2024, was done to assess building trends and any significant changes throughout the 5-year period. Analytes evaluated were Gross Alpha, Gross Beta and Tritium (GABT) of eleven buildings at the Livermore Site, posing the highest risk to sanitary sewer for radioisotopes.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1975

Processing of combined domestic bath and laundry waste waters for reuse as commode flushing water

An experimental investigation of processes and system configurations for reclaiming combined bath and laundry waste waters for reuse as commode flush water was conducted. A 90-min recycle flow was effective in removing particulates and in improving other physical characteristics to the extent that the filtered water was subjectively acceptable for reuse. The addition of a charcoal filter resulted in noticeable improvements in color, turbidity, and suds elimination. Heating and chlorination of the waste waters were investigated for reducing total organism counts and eliminating coliform organisms. A temperature of 335.9 K (145 F) for 30 min and chlorine concentrations of 20 mg/l in the collection tank followed by 10 mg/l in the storage tank were determined to be adequate for this purpose. Water volume relationships and energy-use rates for the waste water reuse systems are also discussed.

Hypes, W. D.↗
DOE OSTI2024

Incorporation of trace metals in Hanford waste boehmite mineral phases and dissolution rate impacts

Abstract Data from radioactive Hanford tank waste samples was analyzed to assess whether trace metals present were incorporated into the bulk boehmite matrix or were simply intermingled with the bulk material and subsequent impacts to the boehmite dissolution rate. Results suggest that chromium is primarily blended into the bulk boehmite, with a small fraction present on the surface of the solids. However, increasing the level of chromium incorporation 30‐fold decreased the dissolution rate of boehmite by only 8%, suggesting incorporation of chromium into these samples had a minimal impact on the dissolution rate. Iron was also found to be incorporated in the boehmite solids. Silicon appears to be simply intermingled and not blended into the boehmite crystals.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

SCALE depletion capabilities for molten salt reactors and other liquid-fueled systems

Nuclear reactor systems that use fuel dissolved in a liquid have the potential for enhanced safety characteristics, improved fuel-cycle outcomes, and more efficient isotope-production configurations. In these reactor systems, the fueled liquid may simultaneously undergo irradiation, physical and chemical removal processes, and fueling. The modeling and simulation of this transmutation and decay with material additions and removals is an ongoing research area. An accurate simulation tool is critical to the reactor and fuel-cycle design, reactor deployment, and source-term characterization for these advanced reactor systems. The work described herein involved implementing, testing, and applying the capability to perform reactor physics simulations within the Oak Ridge National Laboratory-developed SCALE suite for nuclear systems analyses and design, leveraging much of its pedigree in quality-assurance and reactor-analysis capabilities. The functionalities to simulate irradiation with material feeds and removals had been added in ORIGEN, and the TRITON reactor physics sequence was extended to calculate the total removed material and track external nonirradiated mixtures to estimate separate processing or waste streams. Results from these capabilities align with analytical expectations obtained from ORIGEN for simplified test cases and with expectations for a molten salt reactor application. This implementation, available with the SCALE 6.3 release, provides for a more efficient and accurate material accountability methodology, allowing for the characterization, design, and analysis of the complete isotopic material inventory of advanced liquid-fueled systems for a variety of applications.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Effect of ion interactions on the Raman spectrum of NO 3 − : Toward monitoring of low-activity nuclear waste at Hanford

Raman spectroscopy is a valuable in-situ technique for many applications. The concentrations of species in complex ionic mixtures of nuclear waste can be estimated using Raman measurements. However, it has been experimentally observed that ion interactions can cause a modification of Raman peak intensities and positions. The present work explores the nonlinear behavior associated with the nitrate anion, NO 3 − , which is present in abundance in low activity nuclear waste. We examine changes in the main Raman peak of the nitrate anion in the presence of other ions. A wide range of concentrations are covered, including those expected during direct-feed low-activity waste (DFLAW) processing at the Hanford site in the State of Washington. The experiments showed that the ions interact and associate to form ion pairs, which results in a blue shift (i.e., a shift towards higher wavenumbers) in the main Raman peak of nitrate. The results indicate that cation concentration is a better predictor of the peak shift, compared to ionic strength, both for binary and multicomponent mixtures. These findings have direct implications on the development of spectra-to-composition models for the DFLAW system, since they show deviations from the linearity assumptions used in common chemometric models.

42 ENGINEERING↗
DOE OSTI2025

Developing aqueous solubilizing agents as an alternative to solvent extraction

Here, advancing separations science is important for the entire field of chemistry. One partitioning technique that would benefit from improvement is solvent extraction. Despite its effective and widespread use, the method suffers from some problems: generation of flammable organic waste, lengthy process times, and safety concerns associated with contacting organic solvents with acidic aqueous solutions. We developed an alternative separation method inspired by solvent extraction that side-steps those issues. Toward this end, we identified that the functionality of an extractant (an agent used in solvent extraction to pull analytes from the aqueous phase into the organic phase) would change if it was modified for water solubility. In this alternative scenario, the extractant transforms into an “aqueous solubilizing agent.” We discovered that adding this aqueous solubilizing agent alongside a precipitating agent caused the contaminants to precipitate, but not the analyte. This separation concept was demonstrated within the bounds of one of the most difficult partitioning problems, separating minor actinides (Am 3+ ) from lanthanides (Ln 3+ ). We discovered that the (HSO 3 Ph) 4 BTP (aq) aqueous solubilizing agent prevented Am 3+ (aq) from precipitating with Ln 3+ (aq) when f-element precipitating agents (NaF (aq) or HF (aq) ) were added. This separation boasts impressive Am 3+ (aq) recovery yield (90 ± 2 %), near quantitative Ln 3+ (aq) removal, and high separation factors [>3000, Am 3+ (aq) vs. Nd 3+ (aq) ]. It seems likely – given the large number of candidate extractants that could be modified for aqueous solubility and the numerous combinations of existing solubilizing and precipitating agents – that this alternative approach could be used broadly in place of solvent extraction and solve other important separation problems.

(HSO3Ph)4BTP(aq)↗
DOE OSTI2019

Combining anaerobic digestion and hydrothermal liquefaction in the conversion of dairy waste into energy: A techno economic model for New York state

There is increasing global interest and policies being enacted to lower greenhouse gas emissions, especially from the agricultural sector. In the U.S. for example, states with large dairy operations may combine proven manure valorization technologies, such as anaerobic digestion and hydrothermal liquefaction. Sustainable manure treatment would increase the recovery of energy and other useful co-products, namely biogas, biocrude oil and hydro-char as well as lower the environmental impacts. In this study, the economic feasibility of implementing a centralized bioenergy system in New York State was investigated. Here, the feasibility of this transformation depends on many factors, including capital costs, discount rates, and other financing arrangements, electricity selling prices, incentives and farm sizes and locations. For a large-scale implementation in New York State accounting for nearly 50% of the state’s dairy farms, our model of a distributed, hybrid anaerobic/hydrothermal system was shown to treat 590 million liters of wet manure per day, producing 607 million kWh of electricity, 162,000 L of biocrude oil and 117,000 kg of hydro-char per day. Electricity selling price is a critical factor. Increasing the electricity selling price from wholesale ($\$0.06$ /kWh) to retail ($\$0.18$ kWh) increased the net present value from $\$395$ million to $1.5 billion (considering a 40-year project lifetime).

42 ENGINEERING↗
DOE OSTI2026

Impact of Small-Alkane Solvents on Polyolefin Hydrogenolysis over a Ruthenium Catalyst

Selective catalytic hydrogenolysis of polyolefins is a promising route to convert plastic waste into valuable liquid products, such as lubricants, waxes, and surfactants. However, the high viscosity of polymer melts imposes mass transfer limitations on this reaction. Solvents can mitigate these challenges, but their effects on reaction kinetics and product selectivity remain underexplored. Here, we systematically explore the effects of small n-alkanes and cycloalkanes on the hydrogenolysis of polyethylene and polypropylene over a Ru/TiO 2 catalyst. Using kinetic measurements and isotopic labeling, we show that n-octane at high mass fractions alters the mechanism from direct hydrogenation to solvent-mediated hydrogen transfer, reducing the rate of C–C bond cleavage. Longer alkanes further inhibit reactivity due to stronger surface binding. 1,4-Dimethylcyclohexane suppresses methane formation, favoring heavier products, while decalin likely forms surface-bound aromatics that poison the catalyst. Overall, alkane solvents modulate product selectivity and reduce the yield of methane byproduct, allowing for ∼35–40% selectivity to valuable C 20 -C 30 alkane products. This work highlights the complex impact of polymer–alkane mixtures on hydrogenolysis kinetics relevant to the design of commercial-scale plastic waste valorization processes.

Catalysts↗
DOE OSTI2026

Enzymatic Nylon Deconstruction: Enzyme Discovery, Engineering, and Opportunities

Nylons are widely used synthetic polyamides valued for their strength, versatility, and durability across diverse applications. However, their petrochemical origin and energy-intensive production underscore the need for efficient, circular solutions. Conventional recycling methods remain limited by incomplete recovery, material degradation, and costly sorting requirements. Enzymatic depolymerization offers a selective, low-energy alternative capable of processing mixed waste streams under mild conditions. While significant progress has been achieved for polyesters, enzymatic degradation of polyamides is still at an early stage. The discovery of nylon hydrolases demonstrated the potential of biological systems to evolve catalysts for synthetic polyamides, yet reported depolymerization yields remain low. These limitations reflect both the structural complexity of nylons and the need for improved enzyme discovery and engineering. In conclusion, this review highlights recent advances, key challenges, and future directions for enzymatic nylon recycling, outlining its potential role enabling mixed polymer waste to be used as a green feedstock for remanufacturing.

Amides↗
DOE OSTI2023

A Machine Learning Model for Predicting Composition of Catalytic Coprocessing Products from Molecular Beam Mass Spectra

Demand for the development of an automated and integrated refining process for biofuels has increased in recent years due to the lack of generalized process inspection tools. In bio-oil upgrading processes, all process variables are maintained based on the offline specification of intermediates and products. A lack of real-time product specifications in batch-wise monitoring can cause process failure and wasted resources. Therefore, there is a need for a fast and accurate intermediates/product specification tool that can be used for real-time specification to reduce waste and mitigate the risk of process failure. Here, to address this gap, we developed a machine learning (ML) model for predicting speciated bio-oil composition, including paraffin, iso-paraffins, olefins, naphthene, and aromatics. The model is trained using the mass spectra from upgraded products collected in the vapor phase before condensation and predicts the composition of the condensed product. Training ML models using raw mass spectra is challenging due to numerous overlapped peaks originating from different parent compounds. With this in mind, we propose a protocol that (i) transforms raw mass spectra to chemistry-inspired predefined features and (ii) trains decision tree-based models using these features. Our results show that the random forest model was robust against overfitting and had the highest accuracy compared to other models. Moreover, a stochastic ablation method determined the eight most significant features while maximizing the accuracy. Our protocol facilitates real-time compositional analysis of upgraded bio-oils and thus real-time process monitoring. Additionally, this protocol enables the rational design of efficient catalysts and the determination of optimal process conditions.

09 BIOMASS FUELS↗
DOE OSTI2022

Chapter 14: Chemical Recycling of Commodity Plastics

Global plastic production is at an all-time high and shows little signs of slowing down. Less than 10% of all plastic produced is recycled, with approximately 90% entering landfills, incinerators, and oceans. This has led to a rapid accumulation of single-use plastic waste across the planet. Mechanical recycling has been executed at the industrial level to manage plastic waste for decades. However, mechanically recycled plastic products are significantly limited by contamination and low performance. Chemical recycling technologies offer another pathway for achieving plastic circularity. This chapter highlights the current state-of-the-art chemical recycling technologies for plastic decomposition into monomers, fuels, or other petrochemical feedstocks. A brief description of recyclability of plastics and the waste sorting process is provided followed by a high-level overview of chemical recycling technologies. Products, key barriers, and limitations are also discussed as well as a brief overview of techno-economics.

chemical recycling↗
DOE OSTI2023

A customized MOF-polymer composite for rapid gold extraction from water matrices

With the fast-growing accumulation of electronic waste and rising demand for rare metals, it is compelling to develop technologies that can promotionally recover targeted metals, like gold, from waste, a process referred to as urban mining. Thus, there is increasing interest in the design of materials to achieve rapid, selective gold capture while maintaining high adsorption capacity, especially in complex aqueous-based matrices. Here, a highly porous metal-organic framework (MOF)–polymer composite, BUT-33–poly(para-phenylenediamine) (PpPD), is assessed for gold extraction from several matrices including river water, seawater, and leaching solutions from CPUs. BUT-33–PpPD exhibits a record-breaking extraction rate, with high Au3+ removal efficiency (>99%) within seconds (less than 45 s), a competitive capacity (1600 mg/g), high selectivity, long-term stability, and recycling ability. Furthermore, the high porosity and redox adsorption mechanism were shown to be underlying reasons for the material’s excellent performance. Given the accumulation of recovered metallic gold nanoparticles inside, the material was also efficiently applied as a catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

End-of-Life Plastics Management: A Review: Mechanical recycling, pyrolysis and hydrocracking methods

End-of-life plastics present a significant challenge to achieving a sustainable economy. It is crucial to develop environmentally friendly technologies to process the waste streams beyond landfilling. This review provides a detailed overview of end-of-life plastics management, covering mechanical recycling, pyrolysis and hydrocracking methods. Mechanical recycling is the predominant technique employed on a large scale in recycling end-of-life plastics, and this review discusses the technoeconomic assessment and life cycle assessment (LCA) of mechanical recycling. This review also summarises key studies concentrating on chemical recycling techniques for handling end-of-life plastics. Among these, pyrolysis and hydrocracking are discussed in depth. Recent advancements and fundamentals of these two techniques are covered, highlighting their significance in tackling the plastic waste challenge. The prospects of scaling up pyrolysis and hydrocracking technologies are interpreted in terms of technical and economic feasibility. The discussion concludes with recommendations for future research to commercialise chemical recycling of end-of-life plastics.

Chemistry↗
DOE OSTI1992

Nuclear Safety [Vol. 33, No. 1, January-March 1992]

Nuclear Safety is a review journal that covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated. Table of Contents for this issue follows. GENERAL SAFETY CONSIDERATIONS: 1 Technical Note: A New Approach to Fission Reactor Safety, Yu. V. Petrov; 5 Erratum; ACCIDENT ANALYSIS: 6 Analysis and Modeling of Fission Product Release from Various Uranium-Aluminum Plate-Type Reactor Fuels, R. P. Taleyarkhan; CONTROL AND INSTRUMENTATION: 23 Applications of a Surveillance and Diagnostics Methodology Using Neutron Noise From a Pressurized-Water Reactor, R. T. Wood, L. F. Miller, and R. B. Perez; DESIGN FEATURES: 36 Westinghouse Advanced Passive 600 Plant, B. A. McIntyre and R. K. Beck; 47 System 80+™ PWR Safety Design, C. W. Bagnal, R. A. Matzie, and R. S. Turk; ENVIRONMENTAL EFFECTS: 58 The MATS Experiments—Mesoscale Atmospheric Transport Studies at the Savannah River Site, A. H. Weber, S. Berman, R. J. Kurzeja, and R. P. Addis; 75 Book Review: Environmental Radioactivity in the European Community 1984-1985-1986, C. A. Little; WASTE AND SPENT FUEL MANAGEMENT: 76 Activities Related to Waste and Spent Fuel Management, M. D. Muhlheim and E. G. Silver; OPERATING EXPERIENCES: 87 Aging Assessment of BWR Control Rod Drive Systems, R. H. Greene; 100 Reactor Shutdown Experience, Compiled by J. W. Cletcher; 103 Selected Safety-Related Events, Compiled by G. A. Murphy; 110 Operating U.S. Power Reactors, Compiled by M. D. Muhlheim and E. G. Silver; RECENT DEVELOPMENTS: 129 General Administrative Activities, Compiled by M. D. Muhlheim and E. G. Silver; 139 Reports, Standards, and Safety Guides, D. S. Queener; 143 Proposed Rule Changes as of Sept. 30 1991; ANNOUNCEMENTS: 128 Harvard School of Public Health Announces Short Courses; 128 16th Biennial ANS Topical Meeting on Reactor Operating Experience: Present and Future Technologies—Applying Lessons Learned (Call for Papers); 147 The Authors; 150 Indexes to Nuclear Safety, Volume 32; 154 Errata.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗