Search NASA⌕ Search

SEARCH · Search NASA

Results for “ALKYLATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Evaluation of Aliphatic Alcohols for CO 2 Capture Using the Characteristic Carbonate Frequency

Control over CO 2 capture and utilization are important scientific and technological challenges. Although a variety of amine absorbents are used for capture, releasing the captured CO 2 is often difficult and limits their recyclability. Therefore, it is crucial to control the strength of the CO 2 bond with the absorbent. Furthermore, it is desirable to use a method that can conveniently report the strength of this bond. This motivates exploring adducts of CO 2 with alcohols in the presence of a base, using vibrational spectroscopy to report on the bond strength. Although reactions of alcohols with CO 2 to form alkyl carbonates are known, a systematic study of these adducts has not been conducted. Here we show formation of alkyl carbonates by a series of alcohols spanning the pK a range 9.5 to 16.8. We show experimental and computational results for the frequency of the characteristic asymmetric stretch of the carbonate and demonstrate that it correlates inversely with the pK a of the alcohol. Based on computations of the bond lengths and previous work, we propose that this frequency also correlates inversely with the adduct strength. As a result, this work extends the scope of CO 2 capture reagents and inspires further research in tuning alcohols as reversible absorbents.

Alcohols↗

Non-Precious Metal Catalysts Prepared By Zeolitic Imidazolate Frameworks: The Ligand Influence to Morphology and Performance

A new, “one-pot” synthesis to produce highly active non-PGM electrocatalysts for PEM fuel cells was previously developed by pyrolyzing Fe doped zeolitic imidazolate framework (ZIF) materials prepared by solid-state interaction. Excellent catalytic oxygen reduction reaction (ORR) activities were found through rotating ring-disk electrode (RRDE) and single fuel cell tests. In this study, we compared the ORR activities and structural properties of two catalysts derived from ZIFs containing imidazole and methyl imidazole ligands, respectively. Our results indicate that alkyl group substitution in the imidazolate ligand has a profound effect on the final catalyst performance.

Catalyst↗

Incorporation of Membrane Proteins Into Bicontinuous Microemulsions Through Winsor‐III System‐Based Extraction

Abstract The membrane proteins (MP) α‐synuclein (ASYN) and bacteriorhodopsin (BR) were readily incorporated into bicontinuous microemulsions (BμEs) formed by two microemulsion systems: water/heptane/Aerosol‐OT (AOT)/CK‐2,13 and water/dodecane/sodium dodecyl sulfate (SDS)/1‐pentanol. (CK‐2,13 is an alkyl ethoxylate possessing two alkyl tail groups of carbon chain length 2 and 13 and an average degree of ethoxylation of 5.6.) MP were encapsulated in BμEs through preparation of Winsor‐III systems at optimal salinity, with the anionic surfactants AOT and SDS providing the driving force for extraction. Dissolution of ASYN in BμEs greatly increased the former's α‐helicity, similar to ASYN's behavior in the presence of biomembranes, while BμE‐ and vesicle‐encapsulated BR possessed similar secondary structure. Small‐angle neutron scattering (SANS) results clearly demonstrated the direct interaction of MP with the surfactants, resulting in a decrease of surface area per volume for surfactant monolayers due to decreased surfactant efficiency. The SANS signal for ASYN was isolated through the use of neutron contrast matching for the surfactants through partial deuteration of water and oil, one of the first reports of contrast matching for BμEs in the literature. The SANS results of the contrast‐matched sample reflected similar aggregation for ASYN in BμEs as was reported previously for vesicles and SDS solution. This study demonstrates the potential use of BμEs as MP host systems for conducting biochemical reactions such as the conversion of sunlight into adenosine triphosphate by BR and studying the fundamental behavior of MP, such as the role of ASYN dysfunction in Parkinson's disease, as well as for isolation and purification of MP via Winsor‐III‐based extraction.

Hayes, Douglas G.↗

X-ray Absorption Signatures of Hydrogen-bond Structure in Water-Alcohol Solutions

Despite fundamental importance, the experimental characterization of the hydrogen bond network, particularly in multicomponent protic solutions, remains a challenge. Although recent work has experimentally validated that the oxygen K-edge X-ray ab- sorption spectra is sensitive to local hydrogen bond patterns in pure water and aqueous alcohol solutions, the generality of this observation is unknown - as is the sensitivity to the electronic structure of the alcohol cosolvent. In this work, we investigate the electronic structure of water solvated alcohol model geometries using energy specic time-dependent density functional theory to calculate oxygen K-edge X-ray excitations. We nd that the geometry of dangling hydrogen bonds in pure water is the main con- tributor to the pre-edge feature seen in the X-ray absorption spectra, agreeing with previous experimental and theoretical work. We then extend this result to solvated alcohol systems and observe a similar phenomenon, yet importantly, the increase of electron donation from alkyl chains to the alcohol OH group directly correlates to the strength of the core excitation on the dangling hydrogen bond model geometry. This trend arises from a stronger transition dipole moment due to electron localization on the OH group.

Stetina, Torin↗

A Nonfullerene Acceptor with Alkylthio‐ and Dimethoxy‐Thiophene‐Groups Yielding High‐Performance Ternary Organic Solar Cells

Herein, an A–D–A‐type nonfullerene acceptor (named IDTS‐4F) with an alkyl thiophenyl side chain and dimethoxy thiophene bridging unit is reported. The use of an alkyl thiophenyl group is important, as the insertion of sulfur atoms can slightly downshift the highest occupied molecular orbital (HOMO) level of the molecule and allows IDTS‐4F to match with state‐of‐the‐art donor polymer PM6 (or PM7). Compared with conventional nonfullerene acceptors, IT‐4F, the IDTS‐4F molecule, has a smaller optical bandgap and higher lowest unoccupied molecular orbital (LUMO) level, which are beneficial to increase the V oc and J sc of the devices. Nonfullerene organic solar cell devices are fabricated using IDTS‐4F. Although the binary device based on IDTS‐4F exhibits a lower fill factor (FF, 70%), the ternary device by incorporating 0.2 of IDTS‐4F and 0.8 of IT‐4F (with PM6 as the donor polymer) can simultaneously achieve a higher V oc and J sc , while maintaining the high FF (77%) of IT‐4F based system. Morphology characterizations indicate the formation of homogeneous film morphology, the large increase in phase purity and crystallinity, and the reduction in domain size upon addition of crystalline IDTS‐4F, while the electron/hole mobilities and recombination losses of the IT‐4F system are both maintained.

Zeng, Anping↗

Deuterium incorporation into cellulose: a mini-review of biological and chemical methods

Isotopic enrichment offers structural insights that are not easily accessible with natural abundance isotopic composition. Deuterated cellulose has attracted considerable attention in the field of neutron scattering studies, providing information about the dynamics, structure of cellulose and its interactions with other plant cell wall components. The deuteration of cellulose also allows the analysis of cellulose hydrogen bonds by FTIR or NMR techniques. The chemical structure of cellulose contains both exchangeable hydroxyl and non-exchangeable alkyl hydrogens. Deuterium incorporation can be divided into two classifications: biological route which incorporates both alkyl and hydroxyl bound deuterium, and chemical route which typically replaces hydroxyl-bound exchangeable hydrogen. Additionally, the biological route involves cultivating plants or microorganisms in a deuterium-enriched medium. The chemical route typically involves an exchange reaction between hydroxyl-bound hydrogen and D 2 O, often facilitating with an alkaline reagent. This review provides an overview of recent advances in deuteration methods and characterization as well as the application of deuterated cellulose.

59 BASIC BIOLOGICAL SCIENCES↗

Synthesis, Photophysical Properties and Application of New Porphyrin Derivatives for Use in Photodynamic Therapy and Cell Imaging

New derivatives of tetrakis(4-carboxyphenyl) porphyrin were designed, synthesized and characterized by IR, proton NMR and mass spectroscopy. The ground and excited state nature of new derivatives were examined using UV-Vis. absorption and fluorescence spectroscopy, fluorescence quantum yield and fluorescence lifetime studies. The singlet oxygen quantum yield of each synthesized derivative of porphyrin was estimated for their further efficacy as potential photosensitizer in biological studies. The significant photophysical data of all synthesized derivatives was supplementary accessed to examine the cell imaging and cytotoxicity against two cancer cell lines viz. MBA-MD-231 and A375. The fluorescence lifetime, fluorescence quantum yield and efficiency of singlet oxygen generation suggests alkyl amine and alkyl hydrazide linked new porphyrin photosensitizers can be useful for PDT agent in cancer treatment.

74 ATOMIC AND MOLECULAR PHYSICS↗

Electrochemical transformations and antiradical activity of asymmetrical RS-substituted pyrocatechols

Redox transformations of sulfides 1–8 combining a fragment of sterically hindered pyrocatechol with alkyl, cycloalkyl, and aromatic substituents were studied. The first step of electrooxidation of thioethers affords o-benzoquinones. The introduction of the redox-active thioether group extends the range of redox properties of pyrocatechols. In the second step, the thioether fragment is involved in the quasi-reversible anodic process, and the number of electrons participating in the electrode reaction depends on the structure of the hydrocarbon group bonded to the sulfur atom. The reactivity of compounds 1–8 toward O{sub 2}{sup •–} was evaluated on the basis of the electrochemical data. Cyclopentyl, phenyl, or benzyl substituents in the thioether group exert a greater effect on the antiradical activity than the alkyl moieties. The formation of an o-semiquinolate radical anion in the reaction of pyrocatechol thioethers with KO{sub 2} was detected by the ESR method. It was shown using the reaction with the stable 2,2-diphenyl-1-picrylhydrazyl radical as an example that RS-functionalized pyrocatechols show a higher antiradical activity compared to 3,5-di-tert-butylpyrocatechol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of Hydrophobic Silane Film Deposited on AISI 304 Stainless Steel for Corrosion Protection

This present study was conducted to determine the aptitude of hydrophobic silane coating in corrosion resistance of AISI 304 stainless steel substrate at the nanoscale. Three newly developed hydrophobic silane-based compounds of compositions, namely [tris(trimethylsiloxy)silyethyl]dimethylchlorosilane (alkyl); tridecafloro-1,1,2,2-tetrahydrooctyltrichlorosilane (FOTS); and henicosyl-1,1,2,2-tetrahydrododecyltricholrosilane (FDDTS), were used as precursors to coat AISI 304 stainless steel surfaces. Prior to deposition, the substrate surfaces were pretreated with plasma oxide via a multi-step treatment to serve as adhesion. The plasma oxide and the silane precursors were deposited by using a hybrid atomic layer deposition and chemical vapor deposition process. The structural, chemical and electrochemical stabilities were investigated using SEM, AFM, XRD, ATR-FTIR, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The results showed that the microstructures and morphology of the coated samples were similar, due to the chlorosilane functionalization. The FTIR indicated complete hydrolysis at the nanoscale while the polarization results showed that nano-coating can hamper the corrosion propagation mechanisms. Furthermore, the EIS results revealed that all the precursors acted as a barrier to AISI 304 dissolution into the electrolyte. The electrochemical effect was observed in the microstructural transformation of the coatings. Although all the precursors were shown to have been effective at few nanoscales, the stability of the FDDTS showed to have superseded that of alkyl and FOTS.

36 MATERIALS SCIENCE↗

Immobilization of Candida antarctic Lipase B on Functionalized Ionic Liquid Modified MWNTs

Multiwalled carbon nanotubes (MWNTs) were modified by imidazole-based ionic liquids with different alkyl groups. The modified support samples were characterized by scanning transmission electron microscopy, Raman spectra, thermogravimetric analyses, and X-ray photoelectron spectroscopy. The samples were used to immobilize Candida antarctic lipase (CALB) and the influence of alkyl chain length of ionic liquids on enzymatic properties was investigated by the hydrolysis reaction of triacetin. The results revealed that functionalized ionic liquids modification did not destroy the structure of MWNTs. Compared with the immobilized CALB on MWNTs, the immobilized CALB on novel carriers all exhibited higher activity, thermal stability, and reusability. Especially, the activity of MWNTs-IL (8C)-CALB improved 15.23-folds than MWNTs-CALB, meanwhile, after incubation at 70 °C for 20 min, residual enzyme activity of MWNTs-IL (8C)-CALB was 46% of the initial activity, while MWNTs-CALB already lost all activity. Besides, MWNTs-IL (8C)-CALB retained 64.5% of its initial activity after 4 cycles, while MWNTs-CALB retained only 2.12%. .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

MS/MS-Assisted Design of Sequence-Controlled Synthetic Polymers for Improved Reading of Encoded Information

In order to improve their MS/MS sequencing, structure of sequence-controlled synthetic polymers can be optimized based on considerations regarding their fragmentation behavior in collision-induced dissociation conditions, as demonstrated here for two digitally encoded polymer families. In poly(triazole amide)s, the main dissociation route proceeded via cleavage of the amide bond in each monomer, hence allowing the chains to be safely sequenced. However, a competitive cleavage of an ether bond in a tri(ethylene glycol) spacer placed between each coding moiety complicated MS/MS spectra while not bringing new structural information. Changing the tri(ethylene glycol) spacer to an alkyl group of the same size allowed this unwanted fragmentation pathway to be avoided, hence greatly simplifying the MS/MS reading step for such undecyl-based poly(triazole amide)s. In poly(alkoxyamine phosphodiester)s, a single dissociation pathway was achieved with repeating units containing an alkoxyamine linkage, which, by very low dissociation energy, made any other chemical bonds MS/MS-silent. Structure of these polymers was further tailored to enhance the stability of those precursor ions with a negatively charged phosphate group per monomer in order to improve their MS/MS readability. Increasing the size of both the alkyl coding moiety and the nitroxide spacer allowed sufficient distance between phosphate groups for all of them to be deprotonated simultaneously. Because the charge state of product ions increased with their polymerization degree, MS/MS spectra typically exhibited groups of fragments at one or the other side of the precursor ion depending on the original α or ω end-group they contain, allowing sequence reconstruction in a straightforward manner. .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gas-Phase Oxidation via Ion/Ion Reactions: Pathways and Applications

Here, we provide an overview of pathways available upon the gas-phase oxidation of peptides and DNA via ion/ion reactions and explore potential applications of these chemistries. The oxidation of thioethers (i.e., methionine residues and S-alkyl cysteine residues), disulfide bonds, S-nitrosylated cysteine residues, and DNA to the [M+H+O]{sup +} derivative via ion/ion reactions with periodate and peroxymono-sulfate anions is demonstrated. The oxidation of neutral basic sites to various oxidized structures, including the [M+H+O]{sup +}, [M–H]{sup +}, and [M–H–NH{sub 3}]{sup +} species, via ion/ion reactions is illustrated and the oxidation characteristics of two different oxidizing reagents, periodate and persulfate anions, are compared. Lastly, the highly efficient generation of molecular radical cations via ion/ion reactions with sulfate radical anion is summarized. Activation of the newly generated molecular radical peptide cations results in losses of various neutral side chains, several of which generate dehydroalanine residues that can be used to localize the amino acid from which the dehydroalanine was generated. The chemistries presented herein result in a diverse range of structures that can be used for a variety of applications, including the identification and localization of S-alkyl cysteine residues, the oxidative cleavage of disulfide bonds, and the generation of molecular radical cations from even-electron doubly protonated peptides. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Chromatographic separation of the theranostic radionuclide 111 Ag from a proton irradiated thorium matrix

Column chromatographic methods have been developed to separate no-carrier-added 111 Ag from proton irradiated thorium targets and associated fission products as an ancillary process to an existing 225 Ac separation design. In this paper, we report the separation of 111 Ag both prior and subsequent to 225 Ac recovery using CL resin, a solvent impregnated resin (SIR) that carries an organic solution of alkyl phosphine sulfides (R 3 P = S) and alkyl phosphine oxides (R 3 P = O). The recovery yield of 111 Ag was 93 ± 9% with a radiochemical purity of 99.9% (prior) and 87 ± 9% with a radiochemical purity of 99.9% (subsequent to) 225 Ac recovery. Both processes were successfully performed with insignificant impacts on 225 Ac yields or quality. Measured equilibrium distribution coefficients for silver and ruthenium (a residual contaminant) on CL resin in hydrochloric and nitric acid media are reported, to the best of our knowledge, for the first time. Finally and additionally, measured cross sections for the production of 111 Ag and 110m Ag for the 232 Th(p,f) 110m,111 Ag reactions are reported within.

111Ag↗

Fast and Non-Destructive Determination of Water Content in Ionic Liquids at Varying Temperatures by Raman Spectroscopy and Multivariate Regression Analysis

Imidazolium acetate ionic liquids (ILs) have been utilized as promising solvents in many applications that involve varying water content and temperature. These experimental variables affect the anion-cation intermolecular interactions, which in turn influence the performance of the ILs in these applications. Here, this paper shows Raman spectroscopy can be used as an operando method to measure water content in IL solvents when simultaneous temperature changes may occur. The Raman spectra of 1-alkyl-3-methylimidazolium acetate ILs (alkyl chain length n = 2, 4, 6, 8) with varying water content (from 0.028 to 0.899 water mole fraction) and temperature (from 78.1 K to 423.1 K) were measured. Increasing the water content or decreasing the temperature of the tested ILs weakens the anion-cation intermolecular interactions. The water content of these ILs can be quantified even in conditions when the temperature is changing using Raman spectroscopy combined with multivariate regression analysis, including principal component regression (PCR), partial-least-squares regression (PLSR), and artificial neural networks (ANNs). The ANN model combined with partial-least-squares (PLS) achieves the highest prediction accuracy of water content in ILs at varying temperatures (RMSECV = 0.017, R 2 CV = 99.1%, RMSEP = 0.019, R 2 P = 98.8%, RPD = 8.93). Raman spectroscopy provides a potential fast non-destructive operando method to monitor the water content of ILs even in applications when the temperature may be simultaneously altered; this information can lead to the optimized use of these ILs in many applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fluorinated ionic liquids as gas chromatographic stationary phases for the separation of volatile per- and polyfluoroalkyl substances

Background Here, the production of fluorinated organic compounds in the manufacturing, semiconductor, and pharmaceutical industries has increased exponentially over the past decade. This rapid growth has created an urgent need for efficient chromatographic platforms capable of selectively separating these compounds from complex mixtures, not only to support industrial quality control and waste management practices, but also to enable reliable environmental monitoring of volatile fluorinated contaminants. Conventional GC stationary phases lack the fluorophilic interactions needed for highly fluorinated analytes. Consequently, there is a clear demand for specialized stationary phases designed to improve chromatographic retention and selectivity for these compounds. Results Three stationary phases composed of fluorinated ionic liquids (ILs) with varied extent of fluorination were prepared to study fluorophilic interactions with fluorinated/non-fluorinated probe molecules by gas chromatography (GC). IL stationary phases featuring linear and branched perfluoroalkyl moieties, as well as a branched alkyl moiety, were systematically investigated. Chromatographic performance was examined using fluorinated compounds and their hydrocarbon analogs, including CF 3 -substituted aromatics, aliphatic alcohols, fluorotelomer alcohols (FTOHs), and perfluoroalkenes. Measurements on 5 m and 20 m columns revealed that the IL possessing branched alkyl provided stronger dispersive and hydrogen bonding interactions toward non-fluorinated aromatic and long-chain alcohols, whereas the fluorinated ILs enhanced retention of highly fluorinated FTOHs and perfluorodecene. Comprehensive two-dimensional GC (GC × GC), using a nonpolar primary column coupled with secondary columns featuring cross-bonded poly(trifluoropropylmethyl siloxane) (Rtx-200 ms), the branched fluorinated IL, or the branched non-fluorinated IL, highlighted complementary selectivity with the branched fluorinated IL providing the strongest interactions with fluorinated analytes. Significance These results demonstrate that fluorinated IL stationary phases are promising alternatives to conventional polysiloxane stationary phases for improving the separation of per- and polyfluoroalkyl substances and related fluorinated compounds. By correlating IL structure with fluorophilic interactions, this work establishes design principles for GC stationary phases that enable enhanced selectivity for highly fluorinated analytes while maintaining complementary interactions with non-fluorinated compounds.

Comprehensive two-dimensional GC↗

Catalyst design to direct high-octane gasoline fuel properties for improved engine efficiency

The paraffin-to-olefin (P/O) ratio in gasoline fuel is a critical metric affecting fuel properties and engine efficiency. In the conversion of dimethyl ether (DME) to high-octane hydrocarbons over BEA zeolite catalysts, the P/O ratio can be controlled through catalyst design. Here, we report bimetallic catalysts that balance the net hydrogenation and dehydrogenation activity during DME homologation. The Cu-Zn/BEA catalyst exhibited greater relative dehydrogenation activity attributed to higher ionic site density, resulting in a lower P/O ratio (6.6) versus the benchmark Cu/BEA (9.4). The Cu-Ni/BEA catalyst exhibited increased hydrogenation due to reduced Ni species, resulting in a higher P/O ratio (19). The product fuel properties were estimated with an efficiency merit function and compared against finished gasolines and a typical alkylate blendstock. Merit values for the hydrocarbon product from all three BEA catalysts exceeded those of the comparison fuels (0–5.3), with the product from Cu-Zn/BEA exhibiting the highest merit value (9.7).

Catalyst design↗

Contracting cardiomyocytes in hydrophobic room-temperature ionic liquid

Highlights: Black-Right-Pointing-Pointer Biocompatible room-temperature ionic liquid was applied on beating cardiomyocyte. Black-Right-Pointing-Pointer The lifetime of beating cardiomyocytes was depended on anion functional group. Black-Right-Pointing-Pointer A longer lifetime was recorded for no functional group on alkyl chain on their anion. Black-Right-Pointing-Pointer Amino group on alkyl chain and fluorine in anion induced fatal condition changes. Black-Right-Pointing-Pointer We reported liquid electrolyte interface to stimulate cardiomyocytes. -- Abstract: Room-temperature ionic liquids (RTILs) are drawing attention as a new class of nonaqueous solvents to replace organic and aqueous solvents for chemical processes in the liquid phase at room temperature. The RTILs are notable for their characteristics of nonvolatility, extremely low vapor pressure, electric conductivity, and incombustibility. These distinguished properties of RTILs have brought attention to them in applications with biological cells and tissue in vacuum environment for scanning electron microscopy, and in microfluidic devices for micro-total analysis system (micro-TAS). Habitable RTILs could increase capability of nonaqueous micro-TAS for living cells. Some RTILs seemed to have the capability to replace water in biological applications. However, these RTILs had been applied to just supplemental additives for biocompatible test, to fixed cells as a substitute for an aqueous solution, and to simple molecules. None of RTILs in which directly soaks a living cell culture. Therefore, we demonstrated the design of RTILs for a living cell culture and a liquid electrolyte to stimulate contracting cardiomyocytes using the RTILs. We assessed the effect of RTILs on the cardiomyocytes using the beating lifetime to compare the applicability of RTILs for biological applications. Frequent spontaneous contractions of cardiomyocytes were confirmed in amino acid anion RTILs [P{sub 8,8,8,8}][Leu] and [P{sub 8,8,8,8}][Ala], phosphoric acid derivatives [P{sub 8,8,8,8}][MeO(H)PO{sub 2}], and [P{sub 8,8,8,8}][C{sub 7}CO{sub 2}]. The anion type of RTILs had influence on applicable characteristics for the contracting cardiomyocyte. This result suggested the possibility for biocompatible design of hydrophobic group RTILs to achieve biological applications with living cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multiple mutations in the aglycone binding pocket to convert the substrate specificity of dalcochinase to linamarase

Highlights: • Dalcochinase and linamarase are β-glucosidases with distinct substrate specificities. • Substrate specificities could be converted by substitution of 2–3 key residues. • The I185A mutation is needed to fit substrates with tri-functional aglycone moieties. • The N189F mutant showed a potential for enzymatic synthesis of alkyl glucosides. • β-Glucosidases could be tailored to suit desired hydrolytic or synthetic applications. Dalcochinase from Dalbergia cochinchinensis Pierre and linamarase from Manihot esculenta Crantz are β-glucosidases which share 47% sequence identity, but show distinct substrate specificities in hydrolysis and transglucosylation. Previously, three amino acid residues of dalcochinase, namely I185, N189 and V255, were identified as being important for determining substrate specificity. In this study, kinetic analysis of the ensuing double and triple mutants of dalcochinase showed that only those containing the 185A mutation could appreciably hydrolyze linamarin as well as transfer glucose to 2-methyl-2-propanol. So, the space provided by the I185A mutation appeared to be a prerequisite for accommodation of the aglycone moiety containing three substituents at the carbinol carbon. However, quantitative analysis of the energy parameters revealed mostly antagonistic interactions between these mutations. In addition, the N189F mutant showed a potential for use in enzymatic synthesis of alkyl glucosides via transglucosylation and reverse hydrolysis reactions. Thus, substitution of only 2–3 key residues in the aglycone binding pocket of dalcochinase could convert its specificities to that of linamarase, as well as to be suitable for any chosen hydrolytic or synthetic applications.

60 APPLIED LIFE SCIENCES↗