Search NASA⌕ Search

SEARCH · Search NASA

Results for “ATMOSPHERIC EXPLOSIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Nevada National Security Site Underground Radionuclide Inventory, 1951-1992: Accounting for Radionuclide Decay through September 30, 2012

This report is an update of report LA-13859-MS (Bowen et al., 2001). In that original report, the underground radionuclide inventory at the Nevada National Security Site (NNSS) was decay corrected to September 23, 1992, the date of the last underground nuclear test at the NNSS. In this report, the inventory is updated to account for the decay of radionuclides over two additional decades (1992-2012) and revised tritium, fission product and actinide inventory figures and tables are presented. The maximum contaminant levels for radionuclides were also updated to Safe Drinking Water Act Maximum Contaminant Levels (MCLs) (CFR, 2013). Also, a number of minor errata found in the original publication were corrected. An inventory of radionuclides produced by 828 underground nuclear tests conducted at the NNSS by the Lawrence Livermore National Laboratory, the Los Alamos National Laboratory, and the Department of the Defense from 1951 to 1992 includes tritium, fission products, actinides, and activation products. The inventory presented in this report provides an estimate of radioactivity remaining underground at the NNSS after nuclear testing. The original test inventory is decayed to September 30, 2012, and predictions of inventory decay over the subsequent 1000 years are presented. For the purposes of summary and publication, the Los Alamos National Laboratory and Lawrence Livermore National Laboratory authors of this report subdivided the inventory into five areas corresponding to the principal geographic test centers at the NNSS. The five areas roughly correspond to Underground Test Area “Corrective Action Units” (CAUs) for remediation of groundwater. In addition, the inventory is further subdivided for the Yucca Flat region by tests where the working point depth is more than 328 feet (100 meters) above the water table and tests that were detonated below that level. Water levels used were those from the U. S. Department of Energy, Nevada Operations Office (1997), now called the Nevada Field Office. Curie activities and atoms are reported as of September 30, 2012. This inventory is strictly a compilation of the residual radiologic inventory remaining from the underground nuclear tests conducted by Lawrence Livermore National Laboratory, Los Alamos National Laboratory and the Department of the Defense from 1951 to 1992 and does not include radioactivity from other types of nuclear testing (e.g., atmospheric, reactors, rocket engines). A companion classified report (Miller et al., 2002) contains test-specific data for each test performed at the NNSS. This work has been sponsored by the U. S. Department of Energy, National Nuclear Security Administration Nevada Field Office.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Initial Atmospheric Transport of Particles

A new version of the Initial Atmospheric Transport (IAT) model has been developed. This report fully characterizes the new model. IAT is designed to model heat release into the atmosphere that contains contaminated particles. The heat release forms a buoyant puff or plume. Buoyancy is quickly dissipated in 10's to 100's of seconds through drag and entrainment of ambient air. The final location of contaminant particles in the atmosphere after dissipation of abnormal heat is an important input to long term transportation codes such as the National Oceanic and Atmospheric Administration's (NOAA) Hybrid Single Particle Lagrangian Integrated Trajectory (HYSPLIT) code. Ultimately the settling of contaminants after long term transport provides a basis for estimating health consequences. In comparison to the old version, the new model includes explicit simulation of particles, newly formulated equations of motion for a rising puff, and a new plume model. The plume model releases many instances of a single puff along a single trajectory in a way that balances energy released over a longer period than would be appropriate for a single puff. The puff model has additions for vorticity, turbulence, virtual mass, drag, and entrainment. The particle model leads to direct interfacing between IAT and the long-term transport code HYSPLIT. Previously, particle locations were given a pattern based on IAT's puff trajectory with no particle simulation. Now, particles are explicitly simulated, and 3-D spatial distributions of particles are output based on final positions. Ballistic particles are thrown outward at high velocity from explosive events and tend to hit the ground before the end of the simulation. Non-ballistic particles tend to get pulled into the rising puff s ring of vorticity with some escaping to ambient conditions as buoyant energy dissipates. A new model verification and validation effort was made for the new plume model. The Wallops Island Solid Rocket Propellant (SRP) fire plume was extracted to a 3-D transient dataset. After calibration, the model performs better than previous single puff attempts. Even so, error levels in the process used to estimate location and ambient weather conditions approach 30%. This leads to the conclusion that unplanned photogrammetry evaluations of the IAT model are useful but not sufficiently accurate to quantify model parameters. Like previous attempts, the vertical motion entrainment parameters come out much too high in comparison to values for other studies in the literature. It is suspected that a new model of shear entrainment would alleviate this problem. Unfortunately, IAT already has more calibration parameters than the data comparisons thus far can resolve with statistical certainty. This underscores the need to verify and validate the IAT model using detailed CFD studies that allow ideal statistical comparison with the IAT model for hundreds of cases. Even so, validation by comparison to carefully planned experiments (i.e. with acceptable error levels) is also necessary because the dynamics of entrainment are at a sub-grid level for CFD. Though better validation and verification are most important, many new enhancements are still envisioned for future IAT development. These include particle rain out due to condensation and agglomeration of water, direct connection to the North American Mesoscale (NAM) weather dataset, dynamic weather conditions, including ambient particle entrainment into the puff, and detrainment at the puff to ambient mixing interface. In general, including detailed aerosol dynamics is the greatest coming challenge which will require an entire new sub-model in IAT. This is very important if contaminant particles change in such a way that they increase or decrease in their potential harm to the environment.

54 ENVIRONMENTAL SCIENCES↗

Chemochromic Hydrogen Sensors

As fossil fuel supplies decline, hydrogen is quickly becoming an increasingly important fuel source. Currently hydrogen is the prime fuel of today's space vehicles (e.g., Space Shuttle) and featured as a fuel for some prototype vehicles such as the BMW seven series model. Hydrogen is a colorless, odorless gas with a 4% lower explosive limit which makes leak detection a priority. In an effort to support the use of hydrogen, a chemochromic (color changing) sensor was developed that is robust, simple to use, and does not require active operation. It can be made into a thin tape which can be conveniently used for leak detection at flanges, valves, or outlets. Chemochromic sensors can be either reversible or irreversible; however, irreversible chemochromic sensors will be analyzed in this report. The irreversible sensor is useful during hazardous operations when personnel cannot be present. To actively monitor leaks, testing of the irreversible sensor against environmental effects was completed and results indicated this material is suitable for outdoor use in the harsh beachside environment of Kennedy Space Center. The experiments in this report will give additional results to the environmental testing by adding solid rocket booster residue as a variable. The primary motivation for these experiments is to prepare the sensors for the launch pad environment at the Kennedy Space Center. In an effort to simulate the atmosphere at the pads before and after launch, the chemochromic sensors are exposed to solid rocket residue under various conditions.

Wiggins, Bryan C.↗

Probing the environment of gravitational-wave transient sources with tev afterglow emission

Recently, the Advanced Laser Interferometer Gravitational-wave Observatory detected gravitational-wave (GW) transients from mergers of binary black holes (BHs). The system may also produce a wide-angle, relativistic outflow if the claimed short gamma-ray burst detected by GBM is in real association with GW150914. It was suggested that mergers of double neutron stars (or neutron star-black hole binaries), another promising source of GW transients, also produce fast, wide-angle outflows. In this paper, we calculate the high-energy gamma-ray emission arising from the blast waves driven by these wide-angle outflows. We find that TeV emission arising from the inverse-Compton process in the relativistic outflow, originating from mergers of binary BHs that are similar to those in GW150914, could be detectable by ground-based Imaging Atmospheric Cherenkov Telescopes such as the Cherenkov Telescope Array (CTA) if the sources occur in a dense medium with a density of n≳0.3 cm{sup −3}. For neutron star–neutron star (NS–NS) and NS–BH mergers, TeV emission from the wide-angle, mildly relativistic outflow could be detected as well, if it occurs in a dense medium with n≳10--100 cm{sup −3}. Thus, TeV afterglow emission could be a useful probe of the environment of the GW transients, which could shed light on the evolution channels of the progenitors of GW transients.

79 ASTRONOMY AND ASTROPHYSICS↗

Removal and Deactivation of Bond Sodium from Fast Reactor Blanket Materials

The disposition of sodium-bonded spent nuclear fuel and blanket materials in a repository is complicated by the presence of sodium metal that is used as a thermal bond between the uranium metal fuel and blanket slugs and their cladding. The concern is that the metallic sodium could react with water, producing explosive hydrogen gas, or could exhibit a pyrophoric character. Thus, experimental studies were performed to investigate and demonstrate the removal and deactivation of bond sodium from blanket material in a dry environment. Specifically, bond sodium was removed from unirradiated Fermi-1 blanket elements and an assembly via a melt-drain-evaporate process using elevated temperature and reduced pressure. The effectiveness of sodium metal removal from the blanket materials and their associated cladding was =99.9998%, based on post-test quantitative analyses. The separated sodium metal was collected and subsequently deactivated by reacting it in a molten state with a controlled addition of ammonium chloride particles atop a molten salt medium. In this process sodium chloride is formed and assimilates into the salt pool. The subsequent deactivation of the bond sodium produced a solid ingot of sodium chloride, potassium chloride, lithium chloride, and cesium chloride that was devoid of sodium metal based on post-test analyses of the salt product. Both the sodium removal and deactivation operations were conducted within a dry inert atmosphere enclosure. The results of this study substantiate a path forward for the disposition of sodium-bonded blanket materials, including 34 metric tons heavy metal in irradiated Fermi-1 blanket material currently stored at Idaho National Laboratory.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Tracking the Hunga Tonga-Hunga Ha’apai Eruption Stratospheric Aerosol and Trace Gas Plumes Using Machine Learning

On January 15, 2022, the Hunga Tonga-Hunga Ha’apai (hereafter, Hunga Tonga) submarine volcano had an explosive eruption that thrusted ash, gases, and water vapor through the troposphere into the stratosphere and mesosphere. Previous studies manually tracked the aerosol and trace gas plumes over time across different positions in the southern hemisphere. Using data retrieved from low earth orbiting satellite instruments (e.g., OMPS, OMI, and CALIPSO), this research demonstrates how open-source machine learning (ML) models, like Meta’s Segment Anything Model (SAM), with prompt engineering can perform automatic plume tracking following the Hunga Tonga eruption. This extensible methodology, and modular data processing and modeling pipeline using NASA Earthdata and Openscapes, establishes a framework for systematically and rapidly studying extreme events, including volcanic eruptions and large-scale wildfires. By combining advanced machine learning techniques, such as SAM’s zero-shot learning, with large volumes of remote sensing data, this work demonstrates how AI and open science can accelerate research and generate actionable results. The tools and technologies presented here can help translate earth science to action from NASA’s current and future Earth observing satellite missions (e.g., the Atmosphere Observing System (AOS)), and assist researchers and stakeholders in understanding, mapping, and responding to natural disasters and extreme events in a changing world.

David M. Giles↗

Exascale Computing and Data Handling: Challenges and Opportunities for Weather and Climate Prediction

The emergence of exascale computing and artificial intelligence offer tremendous potential to significantly advance Earth system prediction capabilities. However, enormous challenges must be overcome to adapt models and prediction systems to use these new technologies effectively. A 2022 WMO report on exascale computing recommends “urgency in dedicating efforts and attention to disruptions associated with evolving computing technologies that will be increasingly difficult to overcome, threatening continued advancements in weather and climate prediction capabilities.” Further, the explosive growth in data from observations, model and ensemble output, and postprocessing threatens to overwhelm the ability to deliver timely, accurate, and precise information needed for decision-making. Artificial intelligence (AI) offers untapped opportunities to alter how models are developed, observations are processed, and predictions are analyzed and extracted for decision-making. Given the extraordinarily high cost of computing, growing complexity of prediction systems, and increasingly unmanageable amount of data being produced and consumed, these challenges are rapidly becoming too large for any single institution or country to handle. This paper describes key technical and budgetary challenges, identifies gaps and ways to address them, and makes a number of recommendations.

Atmosphere↗

Neutrino-driven Winds in Three-dimensional Core-collapse Supernova Simulations

Abstract In this paper, we analyze the neutrino-driven winds that emerge in 12 unprecedentedly long-duration 3D core-collapse supernova simulations done using the code F ornax . The 12 models cover progenitors with zero-age main-sequence mass between 9 and 60 solar masses. In all our models, we see transonic outflows that are at least 2 times as fast as the surrounding ejecta and that originate generically from a proto−neutron star surface atmosphere that is turbulent and rotating. We find that winds are common features of 3D simulations, even if there is anisotropic early infall. We find that the basic dynamical properties of 3D winds behave qualitatively similarly to those inferred in the past using simpler 1D models, but that the shape of the emergent wind can be deformed, very aspherical, and channeled by its environment. The thermal properties of winds for less massive progenitors very approximately recapitulate the 1D stationary solutions, while for more massive progenitors they deviate significantly owing to aspherical accretion. The Y e temporal evolution in winds is stochastic, and there can be some neutron-rich phases. Though no strong r -process is seen in any model, a weak r -process can be produced, and isotopes up to 90 Zr are synthesized in some models. Finally, we find that there is at most a few percent of a solar mass in the integrated wind component, while the energy carried by the wind itself can be as much as 10%–20% of the total explosion energy.

79 ASTRONOMY AND ASTROPHYSICS↗

Geostar – a ‘Shovel Ready’ Geostationary Microwave Sounder

A geostationary microwave sounder, capable of providing temperature, water vapor, clouds, precipitation, and wind in the presence of clouds, convection and precipitation, will add tremendously to our ability to observe dynamic atmospheric phenomena, such as hurricanes and severe storms, monsoonal moisture flow, atmospheric rivers, etc. Such a sensor is now feasible, enabled by technology that has been developed under NASA’s Instrument Incubator Program at the Jet Propulsion Laboratory. The Geostationary Synthetic Thinned Aperture Radiometer (GeoSTAR) is essentially an “AMSU in GEO”, i.e. it has similar capabilities as AMSU would have if it were operating on a geostationary satellite, but with similar spatial resolution. GEO orbits are almost 50 times higher than the LEO orbits that current AMSUs operate from, and the corresponding scaling of aperture size required to maintain spatial resolution has stymied the development of such a sensor for many decades. The aperture synthesis approach implemented with GeoSTAR finally overcomes that obstacle, and the large number of microwave receivers and associated electronics required is made possible with new technology that has now been developed. A low-cost mission operating as a hosted payload on a commercial communications satellite has been designed and is “shovel-ready”. The objectives of such a mission could be to advance our understanding and modeling of storm processes that control rapid or explosive intensification of hurricanes, mesoscale convective systems, and extratropical cyclones, or it could be to support operational weather forecasting and nowcasting. Retrieval of temperature and water vapor profiles is possible even in the presence of moderate precipitation, and with the ability to derive horizontal wind vectors by tracking water vapor features, a rich set of parameters measuring the thermodynamics, dynamics and convection and sampled every 15 minutes, will enable significant progress in storm science and forecasting.

Lambrigtsen, Bjorn H↗

Biologically Inspired Ammonia Production with Immobilized Nitrogenase Final Report

Ammonia is a critical component of the US economy as US agricultural exports exceeded $100BB in 2015 and depend heavily on ammonia fertilizers. Ammonia production consumes 1% of the world’s total energy supply and millions of tons are imported each year. An innovative bioelectrocatalyzed process is being developed using immobilized mutated nitrogenase enzymes to directly convert atmospheric nitrogen to ammonia at standard conditions, 25° C and 1 atm, and without the need for natural gas. This technology utilizes an enhanced enzyme and advanced enzyme immobilization method for increased production efficiency. The Phase I project developed a new enzyme and polymer support structure which enables direct conversion of nitrogen to ammonia under mild conditions without the need for added chemicals; only electricity and water are required. The system exhibited significantly higher efficiency than competing technologies. The Phase II project will develop a commercial process for the enzyme/polymer system. This will include scaling up production of the enzyme and determining process conditions for maximum productivity. This technology is intended for the commercial fertilizer industry, which currently uses large, expensive plants for centralized production, consuming vast amounts of natural gas and generating significant CO 2 pollution. This technology could also be used to generate alternative ammonia-based fuel and ammonia-based commodity chemicals. The Federal Government would benefit from this technology by reducing dependence on foreign imports, and increasing domestic production of a commodity chemical. Ammonia is used as key component in explosives and propellants and is essential for national security. Distributed production will lower the vulnerability of this resource. The key benefit for the customer is lower capital and operating cost. Building new ammonia production plants cost >$2BB with considerable infrastructure costs to ship the ammonia. The primary method of transportation is pipe to truck distribution, although some is still carried via railway. The feature that set our technology apart from the current Haber-Bosch process is the ability for low-cost distributed production.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Kink Instability of Flux Ropes in Partially Ionized Plasmas

In the solar atmosphere, flux ropes are subject to current-driven instabilities that are crucial in driving plasma eruptions, ejections, and heating. A typical ideal magnetohydrodynamics instability developing in flux ropes is the helical kink, which twists the flux rope axis. The growth of this instability can trigger magnetic reconnection, which can explain the formation of chromospheric jets and spicules, but its development has never been investigated in a partially ionized plasma (PIP). Here, we study the kink instability in PIP to understand how it develops in the solar chromosphere, where it is affected by charge-neutral interactions. Partial ionization speeds up the onset of the nonlinear phase of the instability, as the plasma β of the isolated plasma is smaller than the total plasma β of the bulk. The distribution of the released magnetic energy changes in fully ionized plasma and PIP, with a larger increase in internal energy associated with the PIP cases. The temperature in PIP increases faster also due to heating terms from the two-fluid dynamics. PIP effects trigger kink instability on shorter time scales, which is reflected in more explosive chromospheric flux rope dynamics. These results are crucial to understanding the dynamics of small-scale chromospheric structures—minifilament eruptions—that thus far have been largely neglected but could significantly contribute to chromospheric heating and jet formation.

79 ASTRONOMY AND ASTROPHYSICS↗

The R -process Alliance: The Peculiar Chemical Abundance Pattern of RAVE J183013.5-455510

In this work, we report on the spectroscopic analysis of RAVE J183013.5-455510, an extremely metal-poor star, highly enhanced in CNO, and with discernible contributions from the rapid neutron-capture process. There is no evidence of binarity for this object. At [Fe/H] = –3.57, this star has one of the lowest metallicities currently observed, with 18 measured abundances of neutron-capture elements. The presence of Ba, La, and Ce abundances above the solar system $\textit{r}$-process predictions suggests that there must have been a non-standard source of $\textit{r}$-process elements operating at such low metallicities. One plausible explanation is that this enhancement originates from material ejected at unusually high velocities in a neutron star merger event. We also explore the possibility that the neutron-capture elements were produced during the evolution and explosion of a rotating massive star. In addition, based on comparisons with yields from zero-metallicity faint supernova, we speculate that RAVE J1830-4555 was formed from a gas cloud pre-enriched by both progenitor types. From analysis based on Gaia DR2 measurements, we show that this star has orbital properties similar to the Galactic metal-weak thick-disk stellar population.

79 ASTRONOMY AND ASTROPHYSICS↗

Aeolian Sand Transport in the Planetary Context: Respective Roles of Aerodynamic and Bed-Dilatancy Thresholds

The traditional view of aeolian sand transport generally estimates flux from the perspective of aerodynamic forces creating the airborne grain population, although it has been recognized that "reptation" causes a significant part of the total airborne flux; reptation involves both ballistic injection of grains into the air stream by the impact of saltating grains as well as the "nudging" of surface grains into a creeping motion. Whilst aerodynamic forces may initiate sand motion, it is proposed here that within a fully-matured grain cloud, flux is actually governed by two thresholds: an aerodynamic threshold, and a bed-dilatancy threshold. It is the latter which controls the reptation population, and its significance increases proportionally with transport energy. Because we only have experience with terrestrial sand transport, extrapolations of aeolian theory to Mars and Venus have adjusted only the aerodynamic factor, taking gravitational forces and atmospheric density as the prime variables in the aerodynamic equations, but neglecting reptation. The basis for our perspective on the importance of reptation and bed dilatancy is a set of experiments that were designed to simulate sand transport across the surface of a martian dune. Using a modified sporting crossbow in which a sand-impelling sabot replaced the bolt-firing mechanism, individual grains of sand were fired at loose sand targets with glancing angles typical of saltation impact; grains were projected at about 80 m/s to simulate velocities commensurate with those predicted for extreme martian aeolian conditions. The sabot impelling method permitted study of individual impacts without the masking effect of bed mobilization encountered in wind-tunnel studies. At these martian impact velocities, grains produced small craters formed by the ejection of several hundred grains from the bed. Unexpectedly, the craters were not elongated, despite glancing impact; the craters were very close to circular in planform. High-speed photography showed them to grow in both diameter and depth after the impactor had ricochetted from the crater site. The delayed response of the bed was "explosive" in nature, and created a miniature ejecta curtain spreading upward and outward for many centimeters for impact of 100-300 micron-diameter grains into similar material. Elastic energy deposited in the bed by the impacting grain creates a subsurface stress regime or "quasi-Boussinesq" compression field. Elastic recovery of the bed occurs by dilatancy; shear stresses suddenly convert the grains from closed to open packing, and grains are consequently able to eject themselves forcefully from the impact site. Random jostling of the grains causes radial homogenization of stress vectors and a resulting circular crater. There is a great temptation to draw parallels with cratering produced by meteorite impacts, but a rigorous search for common modelling ground between the two phenomena has not been conducted at this time. For every impact of an aerodynamically energized grain, there are several hundred grains ejected into the wind for the high-energy transport that might occur on Mars. Many of these grains will themselves become subject to the boundary layer's aerodynamic lift forces (their motion will not immediately die and add to the creep population), and these grains will become indistinguishable from those lifted entirely by aerodynamic forces. As each grain impacts the bed, it will eject even more grains into the flow. A cascading effect will take place, but because it must be finite in its growth, damping will occur as the number of grains set in motion causes mid-air collisions that prevent much of the impact energy from reaching the surface of the bed -thus creating a dynamic equilibrium in a high-density saltation cloud. It is apparent that for a given impact energy, the stress field permits a smaller volume of grains to convert to open packing as the size of the bed grains increases, or as the energy of the "percussive" grain decreases (by decrease in velocity or mass). Thus, the mass of the "repercussive" grain population that is ejected from the impact site becomes a function of the scale of the stress field in relation to the scale of the bed material (self-similarity being applicable if both bed size and energy are simultaneously adjusted). In other words, in a very high energy aeolian system where an aerodynamically raised grain can ballistically raise many more grains, the amount of material lifted into the wind becomes largely a function of a dilatancy threshold. If this threshold is exceeded, grains are repercussively injected into the saltation cloud. The "dilatancy threshold" may be defined in terms of the saltation percussive force required to convert the bed, through elastic response, from a closed to an open packing system. If open packing cannot be created, the grains cannot escape from the impact site, even though the elastic deformation and percussive force may be able to reorganize the grains with respect to one another. As the crossbow experiments showed, for an ever-increasing bed grain size, a point is reached when no material can be moved because the energy of the percussive grain is insufficient to dilate the relatively coarse bed. Although this seems to be stating the obvious -- that too little energy will not cause the bed to splash -- the consequences of exceeding the "splash threshold" by dilatancy are not so obvious for high-energy aeolian transport. It is noted that the force required to elastically dilate the bed has to overcome Coulombic grain attractions such as dipole-dipole coupling, dielectric, monopole, contact-induced dipole attractions, van der Waals forces, molecular monolayer capillary forces, as well as the mechanical interlocking frictional resistance of the grains. On Mars, it is predicted that the dilatancy threshold may be the prime control of grain flux. Additional information is contained in the original.

Marshall, J. R.↗

Explosive Ice Multiplication Induced by Multiplicative-Noise Fluctuation of Mechanical Breakup in Ice–Ice Collisions

The number of ice fragments generated by breakup of large graupel in collisions with small graupel fluctuates randomly owing to fluctuations in relative sizes and densities of colliding graupel particles and the stochastic nature of fracture propagation. This paper investigates the impact of the stochasticity of breakup on ice multiplication. When both the rate of generation of primary ice and the initial number concentration of ice crystals are low, the system most likely loses all the initial ice and graupel owing to a lack of sustaining sources. Even randomness does not change this mean evolution of the system in its phase space. However, a fluctuation of ice breakup number gives a small but finite chance that substantial ice crystal fragments are generated by breakup of large graupel. That, in turn, generates more large graupel. This multiplicative process due to fluctuations potentially leads to a small but finite chance of explosive growth of ice number.A rigorous stochastic analysis demonstrates this point quantitatively. The randomness considered here belongs to a particular category called ‘‘multiplicative’’ noise, because the noise amplitude is proportional to a given physical state. To contrast the multiplicative-noise nature of ice breakup with a standard ‘‘additive’’ noise process, fluctuation of the primary ice generation rate is also considered as an example of the latter. These processes are examined by taking the Fokker–Planck equation that explicitly describes the evolution of the probability distribution with time. As an important conclusion, stability in the phase space of the cloud microphysical system of breakup in ice–ice collisions is substantially altered by the multiplicative noise.

54 ENVIRONMENTAL SCIENCES↗

A radioxenon detection system using PIPS and CZT

This paper introduces and describes the initial characterizations of a prototype beta gamma coincidence detection system that utilizes a PIPSBox and two coplanar CdZnTe detectors for atmospheric radioxenon identification and nuclear test ban treaty verification. Coincidences between four independent detecting bodies are identified in real time via a custom coincidence module implemented in a field-programmable gate array (FPGA). The system is compact, maintains simple readout electronics, and provides high resolution radiation detection at room temperature operation. Preliminary measurements using 137 Cs and 131m Xe were conducted to optimize various system parameters to achieve optimal energy resolution of key spectral features. The purpose of this research was to explore the utility of these materials and methods for radioxenon monitoring in the International Monitoring System (IMS).

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Layers Can Be Deceiving: A Hopping Model for Small Molecule Diffusion in TATB Crystal

Sorption of small molecule gases in materials can play a significant role in their long‐term stability and compatibility within multi‐material assemblies. While many material properties of the insensitive high explosive TATB (1,3,5‐triamino‐2,4,6‐trinitrobenzene) are well understood, very little is known regarding its permeability to gases. TATB crystal exhibits a graphitic‐like layered packing structure that evokes a mental schema in which the layers form nanoscopic channels, but it is unclear whether this structure promotes gas transport. Here, we use molecular dynamics (MD) simulations to predict transport of small molecules through TATB single crystal. An approach to fit classical force fields is developed to model TATB interactions with H 2 O, He, Ne, and Ar, which is then combined with steered MD to probe gas transport along selected directions in the crystal. We find that small molecule transport occurs via a hopping mechanism that exhibits distinct jumps between interstitial sites and is substantially faster normal to the layers as compared to through them. This result stems from the finding that intralayer junctions between adjacent TATB molecules are the most stable interstitial sites and that energetic barriers are lower for hopping between adjacent layers. An empirical model for diffusion rate based on the MD data shows that the rate decays exponentially with increasing molecular radius and is negligibly small for all molecules larger than He, including common atmospheric gases. These findings have implications for the interpretation of experiments that measure surface area, material response to extreme conditions, and are expected to help constrain models for material aging.

36 MATERIALS SCIENCE↗

The Project “Analogs for VENus’s GEologically Recent Surfaces” (AVENGERS): Unveiling Active Volcanism on Venus

The recently selected missions to Venus opened a new era for the exploration of the Earth’s hellish twin sister. One of the key questions that the selected missions to Venus will address is whether the planet is volcanically active. The identification of ongoing volcanic activity on Venus can indeed unveil important clues on the geologic evolution of the planet, also helping us to better understand how volcanic and atmospheric processes work on Earth, especially those related to the climate change produced by greenhouse gases. To fully contextualize the higher resolution datasets to be provided by the future missions to Venus, we need to be able to exploit the wealth of data to be produced in the best possible way. Different types of instruments will indeed perform unprecedent orbiting and in-situ investigations of the surface and subsurface of Venus. To this regard, the Project “Analogs for VENus’s GEologically Recent Surfaces” (AVENGERS) aims to build a comprehensive database of Terrestrial active volcanoes which may act as suitable analogs for identifying ongoing volcanic activity on Venus. To do this, the project AVENGERS will combine the implementation of terrestrial orbiter radar data analysis techniques (i.e., radar interferometry) with infrared and laboratory analyses of lava flow samples from Terrestrial active volcanoes. As a first suitable analog of the Project AVENGERS, we selected Mount Etna in Sicily for a direct comparison with potentially active volcanic structures of Venus, and with Idunn Mons, one of the most promising possibly active volcanoes of Venus. Given its composite nature, Mount Etna offers the opportunity to identify and study multiple types of eruptive products (both effusive and explosive) from the analysis of high-resolution radar images. The frequent eruptions characterizing this volcano will also allow to test techniques of radar interferometry. Moreover, its ease of access facilitates geologic field trips and in-situ investigations with related sample retrieving. Ongoing infrared laboratory analysis on several altered and unaltered samples retrieved by Mount Etna will help to distinguish spectral signatures of fresh vs weathered volcanic deposits.

P. D’Incecco↗

Environmental Characteristics of Convective Systems During TRMM-LBA

In this paper, data collected from 51 days of continual upper atmospheric soundings and TOGA radar at ABRACOS Hill during the TRMM-LBA experiment are used to describe the mean thermodynamic and kinematic airmass properties of wet season convection over Rondonia, Brazil. Distinct multi-day easterly and westerly lower tropospheric wind regimes occurred during the campaign with contrasting airmass characteristics. Westerly wind periods featured modest CAPE (1000 J/kg), moist conditions (>90% RH) extending through 700 mb and shallow (900 mb) speed shear on the order of 10(exp -4)/s. This combination of characteristics promoted convective systems that featured a relatively large fraction of stratiform rainfall and weak convection nearly devoid of lightning. The environment is very similar to the general airmass conditions experienced during the Darwin, Australia monsoon convective regime. In contrast, easterly regime convective systems were more strongly electrified and featured larger convective rain rates and reduced stratiform rainfall fraction. These systems formed in an environment with significantly larger CAPE (1500 J/kg), drier lower and middle level humidities (< 80% RH) and a wind shear layer that was both stronger (10(exp -3)/s) and deeper (700 mb). The larger CAPE resulted from strong insolation under relatively cloud-free skies (owing to reduced column humidity) and was also weakly capped in the lowest 1-2 km, thus contributing to a more explosive growth of convection. The time series of low- and mid-level averaged humidity exhibited marked variability between westerly and easterly regimes and was characterized by low frequency (i.e., multi-day to weekly) oscillations. The synoptic scale origins of these moisture fluctuations are examined, which include the effects of variable low-level airmass trajectories and upper-level, westward migrating cyclonic vortices. The results reported herein provide an environmental context for ongoing dual Doppler analyses and numerical modeling case studies of individual TRMM-LBA convective systems.

Halverson, Jeffrey B.↗