Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Static Compression of Tetramethylammonium Borohydride

Raman spectroscopy and synchrotron X-ray diffraction are used to examine the high-pressure behavior of tetramethylammonium borohydride (TMAB) to 40 GPa at room temperature. The measurements reveal weak pressure-induced structural transitions around 5 and 20 GPa. Rietveld analysis and Le Bail fits of the powder diffraction data based on known structures of tetramethylammonium salts indicate that the transitions are mediated by orientational ordering of the BH{sub 4}{sup -} tetrahedra followed by tilting of the (CH{sub 3}){sub 4}N{sup +} groups. X-ray diffraction patterns obtained during pressure release suggest reversibility with a degree of hysteresis. Changes in the Raman spectrum confirm that these transitions are not accompanied by bonding changes between the two ionic species. At ambient conditions, TMAB does not possess dihydrogen bonding, and Raman data confirms that this feature is not activated upon compression. The pressure-volume equation of state obtained from the diffraction data gives a bulk modulus [K{sub 0} = 5.9(6) GPa, K'{sub 0} = 9.6(4)] slightly lower than that observed for ammonia borane. Raman spectra obtained over the entire pressure range (spanning over 40% densification) indicate that the intramolecular vibrational modes are largely coupled.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct structural retrieval from gas-phase ultrafast diffraction data using a genetic algorithm

Ultrafast scattering techniques such as ultrafast electron diffraction and ultrafast x-ray diffraction have been utilized to elucidate the structural dynamics, reaction intermediates, and final products in molecular reactions following photoexcitation. The time-dependent structures are typically not directly retrieved from the experimental data, but they rely on comparison with calculations. The genetic algorithm (GA), a global optimization strategy, can be used to retrieve the molecular structures directly from diffraction patterns without any theoretical input. However, the robustness of the GA with respect to real experimental conditions such as a limited momentum transfer range, noise, and artifacts has not been studied in detail. In this work, we characterize the performance of the GA with simulated data that mimic realistic experimental conditions. We have developed and implemented a variant of the GA specific to diffraction measurements which performs better in the presence of imperfect data compared to the standard implementation of the GA. We demonstrate this method with both synthetic data and experimental ultrafast electron diffraction data on the UV-induced photodissociation of trifluoroiodomethane (C⁢F 3⁡ I) molecules.

74 ATOMIC AND MOLECULAR PHYSICS↗

Crystal perfection of GaP films grown on Si substrates by solid-source MBE with atomic hydrogen

GaP films have been grown by migration-enhanced epitaxy on Si (001) substrates tilted by 6{sup o} about the <011> axis. High-energy electron diffraction, transmission electron microscopy, and X-ray diffraction analysis were used to demonstrate that introduction of atomic hydrogen in the course of epitaxy markedly improves the overall structural quality of GaP films. Up to thicknesses of about 0.1 {mu}m, the full width at half-maximum of the (004) reflection in the X-ray diffraction pattern of these films almost coincides with the theoretical value for defect-free films, which indicates that their state is nearly pseudomorphic.

36 MATERIALS SCIENCE↗

Texture Analysis of Polycrystalline Vaterite Spherulites from Lake Sturgeon Otoliths

Fish otoliths, or ear bones, are comprised of the CaCO 3 polymorphs (aragonite, calcite and vaterite), which can occur either alone or in combination. The polymorph phase abundance in an otolith depends on, as yet, unexplained genetic and environmental factors. Most fish otoliths are comprised of the densest CaCO 3 polymorph, aragonite. Sturgeon otoliths, on the other hand, contain significant amounts of the rare and the structurally enigmatic polymorph, vaterite. Sturgeon otoliths are frequently comprised of agglomerations of small microcrystalline vaterite spherulites (<300 μm in diameter), that range in shape from nearly perfect spheres to oblate spheroids. These spherulites are similar to the synthetic vaterite microspheres employed in laser trapping applications. Vaterite spherulites from both hatchery-reared (juvenile) and wild (adult) Lake Sturgeon exhibit extreme crystallographic texture as evidenced by X-ray diffraction patterns and their reconstructed pole-figures determined here. The vaterite crystallites making up the spherulites have excellent registry in both the axial and equatorial directions. Whether synthesized or natural, the texture manifested in these spherulites suggests that vaterite nucleates and grows similarly in vivo otolith formation as well as from laboratory synthesis. The uniaxial optical character of the vaterite spherulites, confirmed by these diffraction experiments and combined with their large birefringence, makes them well suited for laser trapping applications.

36 MATERIALS SCIENCE↗

Single shot time stamping of ultrabright radio frequency compressed electron pulses

We demonstrate a method of time-stamping Radio Frequency compressed electron bunches for Ultrafast Electron Diffraction experiments in the sub-pC regime. We use an in-situ ultra-stable photo-triggered streak camera to directly track the time of arrival of each electron pulse and correct for the timing jitter in the radio frequency synchronization. We show that we can correct for timing jitter down to 30 fs root-mean-square with minimal distortion to the diffraction patterns, and performed a proof-of-principle experiment by measuring the ultrafast electron-phonon coupling dynamics of silicon.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure determination of the intermediate phase of PbSe using experiments and calculations

The pressure-induced structure transitions of PbSe were investigated at pressures up to 50 GPa in diamond anvil cells using synchrotron powder and single-crystal X-ray diffraction methods. A phase transition from the initial NaCl-type structure to an intermediate phase was observed at 4.8 GPa, followed by another phase transition to a CsCl-type structure at 19.5 GPa, which is in agreement with previous reports. In addition, the NaCl-type, Pnma, Cmcm, and CsCl-type structures of PbSe were investigated using density functional theory calculations. Based on the experiments and calculations, the intermediate phase has Pnma symmetry rather than Cmcm symmetry, as has been previously suggested. Some of the diffraction peaks of the Pnma phase were broad in the high-pressure experiments, but were determined to be single diffraction peaks rather than the overlap of multiple peaks by different experimental methods. The Pnma and Cmcm structures of PbSe were compared. It was found that two structures were very similar, and it was difficult to distinguish one power diffraction pattern from the other.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-resolution X-ray diffraction studies of the GaAs structures grown at a low temperature and periodically {delta}-doped with antimony and phosphorus

High-resolution X-ray diffractometry is used to study the GaAs structures grown at a low temperature (LT-GaAs) by molecular beam epitaxy. The feature of the studied structures is the presence of thin (about 1 monolayer) layers {delta}-doped with isovalent Sb and P impurities and formed at a low epitaxial temperature. The {delta}-doped layers periodically arranged in the bulk of the epitaxial film form the X-ray diffraction pattern containing a large number of interference peaks, whose quantitative analysis allows one to extract the information on the thickness, chemical composition, and abruptness of layer boundaries. Such an analysis was performed before and after annealing of the studied samples, and this annealing gives rise to a system of As nanoinclusions (quantum dots) in the bulk of the epitaxial film. The variations in the parameters of diffraction curves that characterize the process of formation of the As quantum dots are revealed. It is established that the formation of the system of As quantum dots in LT-GaAs ({delta}-Sb) causes enhanced damping of super-lattice satellite peaks, which is probably associated with an increase in the roughness and diffusion spreading of the layers {delta}-doped with Sb. A similar phenomenon was not observed in LT-GaAs ({delta}-P), which is most probably caused by the absence of heterogeneous precipitation of As in the layers {delta}-doped with P and lower effective coefficients of diffusion intermixing As-P compared with As-Sb. For the samples with a combined system of the layers {delta}-doped with Sb and P, the diffraction curves quantitatively confirmed the formation of superlattices containing the system of As quantum dots, in which the mismatch with respect to the GaAs substrate by the average lattice parameter is less than 0.0001%.

36 MATERIALS SCIENCE↗

A Study of the Crystal Structure of Co{sub 40}Fe{sub 40}B{sub 20} Epitaxial Films on a Bi{sub 2}Te{sub 3} Topological Insulator

Laser molecular-beam epitaxy has been used to form Co{sub 40}Fe{sub 40}B{sub 20} layers on Bi{sub 2}Te{sub 3} topological insulator substrates, and their growth conditions have been studied. The possibility of growing epitaxial ferromagnetic layers on the surface of a topological insulator is demonstrated for the first time. The CoFeB layers have a body-centered cubic crystal structure with the (111) crystal plane parallel to the (0001) plane of Bi{sub 2}Te{sub 3}. 3D mapping in the reciprocal space of high-energy electron-diffraction patterns made it possible to determine the epitaxial relationships between the film and the substrate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Imaging and Segmenting Grains and Subgrains Using Backscattered Electron Techniques

We present two new methods of processing data from backscattered electron signals in a scanning electron microscope to image grains and subgrains. The first combines data from multiple backscattered electron images acquired at different specimen geometries to (1) better reveal grain boundaries in recrystallized microstructures and (2) distinguish between recrystallized and unrecrystallized regions in partially recrystallized microstructures. The second utilizes spherical harmonic transform indexing of electron backscatter diffraction patterns to produce high angular resolution orientation data that enable the characterization of subgrains. Subgrains are produced during high-temperature plastic deformation and have boundary misorientation angles ranging from a few degrees down to a few hundredths of a degree. Here, we also present an algorithm to automatically segment grains from combined backscattered electron image data or grains and subgrains from high angular resolution electron backscatter diffraction data. Together, these new techniques enable rapid measurements of individual grains and subgrains from large populations.

36 MATERIALS SCIENCE↗

Surface Reconstruction of Hexagonal Y-doped HoMnO3 and LuMnO3 Studied Using Low-energy Electron Diffraction

We have investigated the (0001) surfaces of several hexagonal manganite perovskites by low-energy electron diffraction (LEED) in order to determine if the surface periodicity is different from that of the bulk materials. These LEED studies were conducted using near-normal incidence geometry with a low energyelectron microscope (LEEM)/LEED apparatus from room temperature to 1200 degrees C and with an electron energy in the range of 15-50 eV. Diffraction patterns showed features of bulk-terminated periodicity as well as a 2 2 surface reconstruction. Possible origins for this surface reconstruction structure are discussed and comparisons are made with surface studies of other complex oxides.

36 MATERIALS SCIENCE↗

Synthesis, reversibility and mechanism of the dehydration of monoclinic CaZn{sub 2}(PO{sub 4}){sub 2}·2H{sub 2}O

Highlights: • Reversibility of dehydration of synthetic monoclinic CaZn{sub 2}(PO{sub 4}){sub 2}·2H{sub 2}O to CaZn{sub 2}(PO{sub 4}){sub 2}·H{sub 2}O is proven. • Morphological changes upon dehydration to mono- and anhydrate are investigated. • The diffraction pattern of the monohydrate is presented and indexed. • Lattice constants up to the monohydrate are derived from in-situ XRD measurements. • A topotactic dehydration mechanism is deduced. - Abstract: The reversibility of the dehydration of monoclinic CaZn{sub 2}(PO{sub 4}){sub 2}·2H{sub 2}O to the corresponding monohydrate is proven and the dehydration enthalpy determined by combination of thermal analysis and X-ray diffraction. The mechanism of the monohydrate formation is investigated by scanning electron microscopy (SEM) and temperature dependent in situ X-ray powder diffraction. Mechanistic impact on the powder bulk properties are deduced. As for the orthorhombic dimorph, a crystalline monohydrate species is identified and firstly indexed. Thermal induced changes of the lattice parameters up to the formation of the monohydrate are analyzed. A linear elongation of the lattice parallel to the directions [100] and [001] is found. The corresponding elongation coefficients and the volumetric expansion of the unit cell are determined. With regard to the option of synthetic production of the compound, a possible application of the material for thermochemical energy storage and conversion is conceivable. The relevance of fundamental mechanistic features on the bulk behaviour upon cyclic de- and rehydration is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Eshelby twist and correlation effects in diffraction from nanocrystals

Molecular dynamics simulations were used to model the Eshelby dislocation inside Pd and Ir nanowires and to predict the powder diffraction pattern using the Debye scattering equation. We find that the ideal dislocation solution by Eshelby is in good agreement with the observed twist angle and deviatoric strain, even though it ignores both the splitting of the Eshelby dislocation into two partials and surface stress. Surface stress plays a significant role only for nanorods with small aspect ratio (∼1:1). We also find that Wilson's prediction on the diffraction peak broadening for the Eshelby dislocation is overestimated because it ignores the fact that the Eshelby twist relaxes the deviatoric strain. Moreover, the twist loosens the correlation along the nanorod, causing additional line profile broadening, which is read by diffraction as a decrease of coherent domain size when the total twist angle is bigger than 1.5°. Overall, our findings suggest a novel way to predict and analyze the dislocations as well as the resulting strain fields in the twisted nanocrystalline rods.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Automated crystal orientation and phase mapping in TEM

The paper describes an automated crystal orientation and phase mapping technique that allows nanoscale characterization of crystalline materials with a transmission electron microscope. The template matching strategy used to identify the diffraction patterns is detailed and the resulting outputs of the technique are illustrated. Some examples of applications are used to demonstrate the capability of the tool and potential developments are discussed.

36 MATERIALS SCIENCE↗

The incommensurately modulated structures of low-temperature labradorite feldspars: a single-crystal X-ray and neutron diffraction study

Labradorite feldspars of the plagioclase solid solution series have been known for their complicated subsolidus phase relations and enigmatic incommensurately modulated structures. Characterized by the irrationally indexed e -reflections in the diffraction pattern, e -labradorite shows the largest variation in the incommensurate ordering states among the e -plagioclase structures. The strongly ordered low-temperature e -labradorite is one of the last missing pieces of the e -plagioclase puzzle. Nine plutonic and metamorphic labradorite feldspar samples from Canada, Ukraine, Minnesota (USA), Tanzania and Greenland with compositions ranging from An 52.5 to An 68 were studied with single-crystal X-ray diffraction. Two crystals from Labrador, Canada, and Duluth, MN, USA, with wide enough twin lamellae were analyzed with single-crystal neutron diffraction. The incommensurately modulated structures of e -plagioclase are refined for the first time with neutron diffraction data, which confirmed that the T—O distance modulation in the low-temperature e -plagioclase results from the Al–Si ordering in the framework. Detailed configurations of the M site are also observed in the structures refined from neutron diffraction data, which were not possible to see with X-ray diffraction data. The relation between the q -vectors and the mole% An composition is revealed for the entire compositional range of e -plagioclase, from An 25 to An 75 . The previously proposed two-trend relation depending on the cooling rate and phase transition path is confirmed. A new classification of e -plagioclase ( e α , e β and e γ ) is proposed based on the q -vector of the structure, which makes it an independent character from the presence/absence of density modulation. New parameters are proposed to quantify the ordering states of these complicated aperiodic structures of e -plagioclases, such as the difference between $\langle$T 1 o—O$\rangle$ and $\langle$T 1 m—O$\rangle$ at phase t = 0.2 or the normalized intensity of the (071\bar 1) reflection.

36 MATERIALS SCIENCE↗

A simple route to synthesize carbon-nanotube/cadmium-sulfide hybrid heterostructures and their optical properties

Multi-walled carbon nanotube/cadmium sulfide hybrid heterostructures were easily synthesized by employing a thermal decomposition of thioacetamide as a sulfide-ion source in an aqueous regime. The resulting cadmium-sulfide phase is comprised of a zinc-blende structure of spherical polycrystalline nanoparticles (cadmium-sulfide nanoclusters) with the subunits of ca. 15 nm, deposited on the nanotube surface. The formation of the cadmium-sulfide nanoparticles with zinc-blende structure (cubic crystal) suggests that the local concentrations of reacting ion species in the vicinity of the nanotube surface are different from those in the reaction solution. The cadmium-sulfide nanoparticles are comprised of a stoichiometrically ideal chemical-composition ratio (cadmium: sulfur=1:1.02) of cadmium and sulfur with the valence states of +2 and -2, respectively. The optical responses of the cadmium-sulfide phase for ultraviolet-visible light and photoluminescence spectroscopes show the proper size-effect and inherent optical properties of the cadmium-sulfide nanoparticles. - Graphical abstract: Transmission electron micrograph observation and electron diffraction pattern analysis of MWCNT/CdS heterostructures, which show that CdS nanoparticles with cubic CdS phase are deposited on the surface of MWCNTs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Comprehensive characterization of ball-milled powders simulating a tribofilm system

A model system was used to simulate the properties of tribofilms which form during automotive braking. The model system was prepared by ball milling of a blend of 70 vol.% iron oxides, 15 vol.% molybdenum disulfide and 15 vol.% graphite. The resulting mixture was characterized by X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and various transmission electron microscopic (TEM) methods, including energy dispersive X-ray spectroscopy (EDXS), high resolution investigations (HRTEM) with corresponding simulation of the HRTEM images, diffraction methods such as scanning nano-beam electron diffraction (SNBED) and selected area electron diffraction (SAED). It could be shown that the ball milling caused a reduction of the grain size of the initial components to the nanometer range. Sometimes even amorphization or partial break-down of the crystal structure was observed for MoS{sub 2} and graphite. Moreover, chemical reactions lead to a formation of surface coverings of the nanoparticles by amorphous material, molybdenum oxides, and iron sulfates as derived from XPS. - Highlights: • Ball milling of iron oxides, MoS{sub 2}, and graphite to simulate a tribofilm • Increasing coefficient of friction after ball milling of the model blend • Drastically change of the diffraction pattern of the powder mixture • TEM & XPS showed the components of the milled mixture and the process during milling. • MoS{sub 2} and graphite suffered a loss in translation symmetry or became amorphous.

36 MATERIALS SCIENCE↗

Size-tunable strain engineering in Ge nanocrystals embedded within SiO{sub 2} and Si{sub 3}N{sub 4}

We report a unique ability to control the sign and size of the stress within Ge nanocrystals or nanodots fabricated using a complementary metal-oxide-semiconductor-compatible process within SiO{sub 2} and Si{sub 3}N{sub 4} layers. Very large (as much as 4.5%), size-dependent compressive and tensile strains can be generated depending on whether the dot is embedded within either a Si{sub 3}N{sub 4} or a SiO{sub 2} layer. Raman measurements reveal significant anharmonicity for smaller Ge dots and possible distortions of the diamond cubic lattice as evidenced by the measured Grünesien parameters and confirmed by their transmission electron diffraction patterns. Two completely different mechanisms are proposed to explain the formation of the tensile and compressive strain states, respectively.

77 NANOSCIENCE AND NANOTECHNOLOGY↗