Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffuser Flows”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Adaptive Mesh Refinement for Parallel in Time Methods

The project applied the multigrid-reduction-in-time (MGRIT) algorithm to an existing sub-cycled adaptive mesh refinement (AMR) code to investigate the performance of flows dominated by inertial physics. Previous work demonstrated good performance from MGRIT+AMR applied to flows dominated by diffusive physics. Consistent with previous experience, inertial physics negatively affected convergence rates and performance. Efforts to circumvent this issue by appealing to the physics of turbulence were investigated. It has been demonstrated that scales can be effectively transferred between multigrid levels for a turbulent flow resulting in a) partial convergence observed and b) nearly identical results to sequential time-stepping. Performance improvements have not yet been demonstrated - attempts at coarsening the grid on coarser MG levels compromises the solution quality and leads to divergence. This report summarize the accomplishments for the time-frame from 10/5/2020 to 12/31/2020 with an informal no-cost-extension to 05/20/2021

97 MATHEMATICS AND COMPUTING↗

The importance of parameter variances, correlations lengths, and cross-correlations in reactive transport models: key considerations for assessing the need for microscale information

A process-oriented modeling approach is implemented to examine the importance of parameter variances, correlation lengths, and especially cross-correlations in contaminant transport predictions over large scales. It is shown that the most important consideration is the correlation between flow rates and retardation processes (e.g., sorption, matrix diffusion) in the system. lf flow rates are negatively correlated with retardation factors in systems containing multiple flow pathways, then characterizing these negative correlation(s) may have more impact on reactive transport modeling than microscale information. Such negative correlations are expected in porous-media systems where permeability is negatively correlated with clay content and rock alteration (which are usually associated with increased sorption). Likewise, negative correlations are expected in fractured rocks where permeability is positively correlated with fracture apertures, which in turn are negatively correlated with sorption and matrix diffusion. Parameter variances and correlation lengths are also shown to have important effects on reactive transport predictions, but they are less important than parameter cross-correlations. Microscale information pertaining to contaminant transport has become more readily available as characterization methods and spectroscopic instrumentation have achieved lower detection limits, greater resolution, and better precision. Obtaining detailed mechanistic insights into contaminant-rock-water interactions is becoming a routine practice in characterizing reactive transport processes in groundwater systems (almost necessary for high-profile publications). Unfortunately, a quantitative link between microscale information and flow and transport parameter distributions or cross-correlations has not yet been established. One reason for this is that quantitative microscale information is difficult to obtain in complex, heterogeneous systems. So simple systems that lack the complexity and heterogeneity of real aquifer materials are often studied. Another is that instrumentation used to obtain microscale information often probes only one variable or family of variables at a time, so linkages to other variables must be inferred by indirect means from other lines of evidence. Despite these limitations, microscale information can be useful in the development and validation of reactive transport models. For example, knowledge of mineral phases that have strong affinities for contaminants can help in the development of cross-correlations between flow and sorption parameters via characterization of permeability and mineral distributions in aquifers. Likewise, microscale information on pore structures in low-permeability zones and contaminant penetration distances into these zones from higher-permeability zones (e.g., fractures) can provide valuable constraints on the representation of diffusive mass transfer processes between flowing porosity and secondary porosity. The prioritization of obtaining microscale information in any groundwater system can be informed by modeling exercises such as those conducted for this study.

54 ENVIRONMENTAL SCIENCES↗

Effect of iron and silica nanoparticles’ size on in vitro human skin binding and penetration

This in vitro skin study determined absorption, diffusion, and binding rates of four [14C]-labeled nanoparticles (NPs): 12 nm Fe 3 O 4 , 32 nm Fe 3 O 4 @SiO 2 , 33 nm SiO 2 , and 78 nm SiO 2 in each layer of human cadaver skin. In vitro microdialysis device and flow-through skin diffusion system were used to measure the binding affinity to the stratum corneum (SC) and permeability into/through skin layer of the four NPs with different physical–chemical properties, respectively, in short (30 min) and/or long (24 hours) exposures. Results show that NP size is an important factor affecting NP percutaneous absorption. The 12 nm Fe 3 O 4 NPs reached the SC and viable epidermis; 32 nm Fe 3 O 4 @SiO 2 core/shell NPs only reached SC. However, 33 nm and 78 nm silica NPs did not permeate SC. Similar patterns were observed for NP binding affinity to SC and dermatopharmacokinetic analysis using the tape stripping method. The binding affinity determination may be a useful method to efficiently screen skin penetration of NPs.

59 BASIC BIOLOGICAL SCIENCES↗

Improving generative model-based unfolding with Schrödinger bridges

Machine learning-based unfolding has enabled unbinned and high-dimensional differential cross section measurements. Two main approaches have emerged in this research area; one based on discriminative models and one based on generative models. The main advantage of discriminative models is that they learn a small correction to a starting simulation while generative models scale better to regions of phase space with little data. We propose to use Schrödinger bridges and diffusion models to create , an unfolding approach that combines the strengths of both discriminative and generative models. The key feature of is that its generative model maps one set of events into another without having to go through a known probability density as is the case for normalizing flows and standard diffusion models. We show that achieves excellent performance compared to state of the art methods on a synthetic Z + jets dataset. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Laser Anemometer Measurements of the Flow Field in a 4:1 Pressure Ratio Centrifugal Impeller

A laser-doppler anemometer was used to obtain flow-field velocity measurements in a 4:1 pressure ratio, 4.54 kg/s (10 lbm/s), centrifugal impeller, with splitter blades and backsweep, which was configured with a vaneless diffuser. Measured through-flow velocities are reported for ten quasi-orthogonal survey planes at locations ranging from 1% to 99% of main blade chord. Measured through-flow velocities are compared to those predicted by a 3-D viscous steady flow analysis (Dawes) code. The measurements show the development and progression through the impeller and vaneless diffuser of a through-flow velocity deficit which results from the tip clearance flow and accumulation of low momentum fluid centrifuged from the blade and hub surfaces. Flow traces from the CFD analysis show the origin of this deficit which begins to grow in the inlet region of the impeller where it is first detected near the suction surface side of the passage. It then moves toward the pressure side of the channel, due to the movement of tip clearance flow across the impeller passage, where it is cut by the splitter blade leading edge. As blade loading increases toward the rear of the channel the deficit region is driven back toward the suction surface by the cross-passage pressure gradient. There is no evidence of a large wake region that might result from flow separation and the impeller efficiency is relatively high. The flow field in this impeller is quite similar to that documented previously by NASA Lewis in a large low-speed backswept impeller.

Skoch, G. J.↗

Hydrophobic Filter Material for Nuclear Material Transportation and Storage Containers - 17518

Los Alamos National Laboratory has begun development of hydrophobic or super-hydrophobic inorganic filter materials that resist water ingress after exposure to radiation and/or elevated temperature. Filters that are currently available depend on carbon composites and/or organic polymers for their water resistant/hydrophobic properties to minimize water ingress. However, facility and transportation accident scenarios often include fire, impact and subsequent water spray or flooding conditions. A purely inorganic hydrophobic filter material could have enhanced resistance to fire and radiation damage, and continue to minimize water ingress after such an accident. Such filters could broaden the use of filtered containers in the transportation and storage of nuclear materials, and could have broader implications in other industrial applications. The goal is to create a porous inorganic material with hydrophobic properties that maintains or exceeds the current performance criteria for particulate filtration efficiency, pressure differential, air flow and hydrogen diffusion. The materials developed in this project show promise in evaluations for use as enhancements to the SAVY 4000 nuclear storage container that is becoming widely used around the DOE complex. Preliminary results indicate that the treated filters provide resistance to a water column pressure test and have filtration efficiencies and air flow pressure drops that meet the current performance criteria. There are various treatment options being tested to help determine the best path forward. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

An experimental investigation of S-duct flow control using arrays of low-profile vortex generators

An experimental investigation was undertaken to measure the effect of various configurations of low-profile vortex generator arrays on the flow in a diffusing S-duct. Three parameters that characterize the vortex generator array were systematically varied to determine their effect: (1) the vortex generator height; (2) the streamwise location of the vortex generator array; and (3) the vortex generator spacing. Detailed measurements of total pressure at the duct exit, surface static pressure, and surface flow visualization were gathered for each vortex generator configuration. These results are reported here along with total pressure recovery and distortion coefficients determined from the experimental data. Each array of vortex generators tested improved total pressure recovery. The configuration employing the largest vortex generators was the most effective in reducing total pressure recovery. No configuration of vortex generators completely eliminated the flow separation that naturally occurs in the S-duct, however the extent of the separated flow region was reduced.

Reichert, Bruce A.↗

Spring 2014 Internship Diffuser Data Analysis

J-2X engine testing on the A-2 test stand at the NASA John C. Stennis Space Center (SSC) has recently concluded. As part of that test campaign, the engine was operated at lower power levels in support of expanding the use of J-2X to other missions. However, the A-2 diffuser was not designed for engine testing at the proposed low power levels. To evaluate the risk of damage to the diffuser, computer simulations were created of the rocket engine exhaust plume inside the 50ft long, water-cooled, altitude-simulating diffuser. The simulations predicted that low power level testing would cause the plume to oscillate in the lower sections of the diffuser. This can possibly cause excessive vibrations, stress, and heat transfer from the plume to the diffuser walls. To understand and assess the performance of the diffuser during low power level engine testing, nine accelerometers and four strain gages were installed around the outer surface of the diffuser. The added instrumentation also allowed for the verification of the rocket exhaust plume computational model. Prior to engine hot-fire testing, a diffuser water-flow test was conducted to verify the proper operation of the newly installed instrumentation. Subsequently, two J-2X engine hot-fire tests were completed. Hot-Fire Test 1 was 11.5 seconds in duration, and accelerometer and strain data verified that the rocket engine plume oscillated in the lower sections of the diffuser. The accelerometers showed very different results dependent upon location. The diffuser consists of four sections, with Section 1 being closest to the engine nozzle and Section 4 being farthest from the engine nozzle. Section 1 accelerometers showed increased amplitudes at startup and shutdown, but low amplitudes while the diffuser was started. Section 3 accelerometers showed the opposite results with near zero G amplitudes prior to and after diffuser start and peak amplitudes to +/- 100G while the diffuser was started. Hot-Fire Test 1 strain gages showed different data dependent on section. Section 1 strains were small, and were in the range of 50 to 150 microstrain, which would result in stresses from 1.45 to 4.35 ksi. The yield stress of the material, A-285 Grade C Steel, is 29.7 ksi. Section 4 strain gages showed much higher values with strains peaking at 1600 microstrain. This strain corresponds to a stress of 46.41 ksi, which is in excess of the yield stress, but below the ultimate stress of 55 to 75 ksi. The decreased accelerations and strain in Section 1, and the increased accelerations and strain in Sections 3 and 4 verified the computer simulation prediction of increased plume oscillations in the lower sections of the diffuser. Hot-Fire Test 2 ran for a duration of 125 seconds. The engine operated at a slightly higher power level than Hot-Fire Test 1 for the initial 35 seconds of the test. After 35 seconds the power level was lowered to Hot-Fire Test 1 levels. The acceleration and strain data for Hot-Fire Test 2 was similar during the initial part of the test. However, just prior to the engine being lowered to the Hot-Fire Test 1 power level, the strain gage data in Section 4 showed a large decrease to strains near zero microstrain from their peak at 1500 microstrain. Future work includes further strain and acceleration data analysis and evaluation.

Laigaie, Robert T.↗

Self stabilizing sonic inlet

An inlet suitable for a turbine engine in a STOL, VTOL or CTOL aircraft is described. A circumferentially extended slot is provided in the inner surface of the air inlet at the windward side and downstream of the throat region. The slot communicates with a circumferential plenum chamber formed in the front of the air inlet just behind the lip. Circumferentially extending rows of apertures are provided on the lip establishing two sets of apertures spaced circumferentially away from the slot in opposite directions. The slot removes the boundary layer from the critical portion of the diffuser to minimize or eliminate flow pressure loss or separations resulting from diffusion or tuning. The apertures are in a region of low static pressure on the lip of the inlet and serve as a source of suction to cause air flow into the slot.

Miller, B. A.↗

Nozzle/Diffuser For Test Section Of Wind Tunnel

Nozzle-diffuser improves distribution of flow in test section and increases recovery of pressure in first diffuser. Has rectangular or circular cross section like contraction duct just upstream of test section and is, in effect, extension of contraction duct. Because flow returning to fan at higher pressure, less fan power needed to maintain same rate of flow.

Barna, P. Stephen↗

Biocellion Version 2.0

This work extends Biocellion 1.0 to solve advection-reaction-diffusion and incompressible Navier-Stokes partial differential equations to model water/blood flow. Biocellion is a software framework to simulate a large number of cells using high-performance parallel computers. The version 1.0 allows software users to describe biological system behaviors as a set of rules describing how individual cells behave and how cells locally interact with neighboring cells or the surrounding micro-environment. However, the version 1.0 does not support users to incorporate water/blood flow into the model, which is important to properly capture long distance communications between distant cells. This extension (version 2.0) integrates two partial differential equation solvers to the Biocellion framework to solve this limitation. Navier-Stokes equation solvers (for incompressible flow) are added to compute flow rate, and advection-reaction-diffusion equation solvers are added to update molecular concentrations considering both advection (due to flow) and local diffusion.

Kang, Seunghwa↗

Effects of thermophoresis on high-pressure binary-species boundary layers with uniform and non-uniform compositions

Direct numerical simulations of high-pressure binary-species temporal boundary layers are performed to investigate the flow physics for three situations: (1) uniform and equal composition, (2) uniform but unequal compositions and (3) non-uniform composition. Both colder- and hotter-wall situations compared with the free stream are simulated. The working fluid is a nitrogen/methane mixture. The analysis is performed at a case-specific self-similar state. Even when the initial composition is uniform, the methane mean mass fraction decreases near the colder wall, whereas it increases near the hotter wall and the mass fraction fluctuates in the entire boundary layer. Analysis of the species-mass diffusion balance and flow structures reveal that both mass-fraction variation and fluctuations are induced by the Soret effect. When the initial composition is non-uniform and the wall is colder, the methane mean mass fraction monotonically increases from the wall akin to its initial profile. However, when the wall is hotter the mean mass fraction decreases near the wall in contrast to its initial profile, a fact traced through the species-mass diffusion balance to the Soret effect being large and enriching methane near the wall. In contrast, the direction of the Soret flux is opposite for the colder wall, thus keeping the methane concentration small. Although the initial magnitude of the difference between the wall and free-stream temperature is the same in all cases, the situation is not symmetric between colder- and hotter-wall cases; the flow structure exhibits much smaller scales when the wall is hotter than when the wall is colder.

Mechanics↗

FunDiff: diffusion models over function spaces for physics-informed generative modeling

Recent advances in generative modeling-particularly diffusion models and flow matching-have been widely used for synthesizing discrete data such as images and videos. However, adapting these models to physical applications remains challenging, as the quantities of interest are continuous functions governed by complex physical laws. To address this, we introduce FunDiff, an efficient and robust framework for generative modeling in function spaces. FunDiff combines a latent diffusion process with a function autoencoder architecture to handle input functions with varying discretizations, generates continuous functions that can be evaluated at arbitrary locations, and seamlessly incorporate physical priors. These priors are enforced through architectural constraints or physics-informed loss functions, ensuring that generated samples satisfy fundamental physical laws. We theoretically establish minimax optimality guarantees for density estimation in function spaces, demonstrating that diffusion-based estimators achieve optimal convergence rates under suitable regularity conditions. We further demonstrate the practical effectiveness of FunDiff across diverse applications in fluid dynamics and solid mechanics. Empirical results indicate that our method can generate physically consistent samples with high fidelity to the target distribution, and exhibit robustness to noisy and low-resolution data.

Wang, Sifan [Yale University, New Haven, CT (Unite↗

Corrosion Mechanism and Applicability Assessment of N80 and 9Cr Steels in CO{sub 2} Auxiliary Steam Drive

Corrosion tests were conducted in a high-temperature high-pressure (HTHP) autoclave to simulate the conditions of CO{sub 2} auxiliary steam drive in gas injection wells. Weight loss tests were performed with the sheets of N80 and 9Cr steels under the testing conditions. The morphology and composition of corrosion products were explored by SEM, EDS, XRD and XPS. The corrosion resistance of 9Cr steel was better than that of N80 steel under the testing conditions. The corrosion rates of N80 and 9Cr met the application requirements in CO{sub 2} auxiliary steam drive. The results broke the constraint in ISO-15156 standards. The corrosion process of N80 steel was mainly affected by the flow velocity. However, the corrosion process of 9Cr steel was mainly affected by temperature. The corrosion resistance of 9Cr steel depended on the FeCO{sub 3} content of Cr-rich layer, which was closely related to temperature. The low flow velocity influenced the diffusion process of N80 steel corrosive ions, whereas the high flow velocity influenced the integrity of corrosion scales. Considering the influence of flow velocity on the corrosion of tubing and casing, in the gas injection well, 9Cr steel and N80 steel were, respectively, selected as the materials of tubing and casing.

36 MATERIALS SCIENCE↗

Geothermal reservoir characterization using distributed temperature sensing at Brady Geothermal Field, Nevada

Distributed temperature sensing (DTS) systems provide near real-time data collection that captures borehole spatiotemporal temperature dynamics. For this study, temperature data was collected in an observation well at an active geothermal site for a period of eight days under geothermal production conditions. Collected temperature data showcase the ability of DTS systems to detect changes to the location of the steam-water interface, visualize borehole temperature recovery — following injection of a coldwater “slug” — and identify anomalously warm and/or cool zones. The high sampling rate and spatial resolution of DTS data also shows borehole temperature dynamics that are not captured by traditional pressure-temperature survey tools. Inversion of thermal recovery data using a finite-difference heat-transfer model produces a thermal-diffusivity profile that is consistent with laboratorymeasured values and correlates with identified lithologic changes within the borehole. Used alone or in conjunction with complementary data sets, DTS systems are useful tools for developing a better understanding of both reservoir rock thermal properties as well as within and near borehole fluid movement.

15 GEOTHERMAL ENERGY↗

A unifying comparison of nearly scatter free transport models

Gombosi et al. (1993) recently derived a modified telegrapher's equation for charged particle transport under the influence of isotropic scattering. This equation obeys causality and disallows upstream diffusion for particles with random velocities smaller than the bulk flow velocity. The acausal diffusion equation was obtained to lowest order in the expansion of smallness prameters. The paper by Gombosi et al. (1993) prompted responses from Pauls et al. (1993) and Earl (1993). This paper is written to explain the differences between the methods, assumptions, and results of Gombosi et al. (1993), Pauls et al. (1993), and Earl (1993) and presents a new method of obtaining approximate solutions. It is shown that the assumptions used by Gombosi et al. (1993) and Pauls et al. (1993) are physically equivalent. In our solution method, the solution of the modified telegrapher's equation is obtained as the casual limit of solutions accurate to second order in the smallness parameter expansion. In order to investigate the coherent velocity, we have also developed `wavenumber eigenfunctions' which account for all the pitch angle dependence in our Boltzmann equation. Using truncation, Earl (1993) obtains approximations for the wavenumber dependence of the lowest two frequency modes, which correspond to two of the wavenumber eigenmodes. We find that a consequence of including only two wavenumber eigenmodes is that one obtains solutions which disobey causality at sufficiently short times. Furthermore, the coherent velocity of the two eigenmodes is strongly dependent on wavenumber and approaches the particle velocity in the limit of large wavenumber for both isotropic and anisotropic scattering processes. We conclude that Earl's (1993) solutions and solutions obtained using the new solution method implicitly assume weak acausality and reasonable behavior in the temporal regime, t less than 4 tau. The solutions are not strictly consistent with the behavior of the lowest two frequency modes but have similar behavior in the regime of low wavenumber.

Schwadron, N. A.↗

IMPORTANCE OF SURFACE TURBULENT DIFFUSIVITY IN THE SOLAR FLUX-TRANSPORT DYNAMO

A revision to the flux-transport dynamo model for the solar sunspot cycle is proposed and is demonstrated by using the axisymmetric kinematic simulations. The flux-transport dynamo has succeeded to explain the general cyclic behaviors of the sunspots. It has been known, however, that previous models failed to avoid the strong polar surface field and the strong toroidal field at the base in the high latitude, both of which are not consistent with observations. We propose a new regime of the flux-transport dynamo model by assuming an additional intense diffusivity profile near the surface. The surface poloidal field generated by the alpha effect is transported down to the base of the convection zone not by the meridional flow but by the surface diffusion mainly in the mid-latitude. With a moderate alpha quenching, this prevents the concentration of the polar surface field and the amplification of the toroidal field at the high latitude. The condition to obtain the proper magnetic field strength near the pole is eta{sub surf}/u{sub 0}>2 x 10{sup 9} cm, where eta{sub surf} and u{sub 0} are the surface diffusivity and the meridional flow speed, respectively. We also do some parameter studies to ensure the importance of the surface strong diffusivity. In addition, the dependence of the cycle period on free parameters, the speed of meridional flow and the surface diffusivity, is investigated.

79 ASTRONOMY AND ASTROPHYSICS↗

Solidification and crystal growth of solid solution semiconducting alloys

Problems associated with the solidification and crytal growth of solid-solution semiconducting alloy crystals in a terrestrial environment are described. A detailed description is given of the results for the growth of mercury cadmium telluride (HgCdTe) alloy crystals by directional solidification, because of their considerable technological importance. A series of HgCdTe alloy crystals are grown from pseudobinary melts by a vertical Bridgman method using a wide range of growth rates and thermal conditions. Precision measurements are performed to establish compositional profiles for the crystals. The compositional variations are related to compositional variations in the melts that can result from two-dimensional diffusion or density gradient driven flow effects ahead of the growth interface. These effects are discussed in terms of the alloy phase equilibrium properties, the recent high temperature thermophysical data for the alloys and the highly unusual heat transfer characteristics of the alloy/ampule/furnace system that may readily lead to double diffusive convective flows in a gravitational environment.

Lehoczky, S. L.↗