Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELECTRIC PROPERTY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Effect of High-Gradient Magnetic Field on Electrical Property of Carbon Nanotube-Polypyrrole Composite; Nanotube Separation Mechanism

High- and low-gradient magnetic fields are produced by resistor-inductor-capacitor (RLC) discharge apparatuses. The maximum magnetic field is 12.5 Tesla with 1-ms pulse duration. Multiwall carbon nanotube–polypyrrole composite is prepared. The samples are exposed to high- and low-gradient magnetic fields. To understand the behavior of carbon nanotubes (CNTs) in high-gradient magnetic fields (HGMFs), we theoretically calculated the equivalent magnetic susceptibility of a CNT in the gradient magnetic field. We found that the gradient force which is exerted on a CNT could be repellent or absorbent depending on the parallel and perpendicular susceptibilities of the CNT, as well as on the initial orientation of the CNT with respect to magnetic field direction. Four-probe studies show that the electrical conductivity of CNT composites decreases after exposure to a high-gradient magnetic field. Microscopic observation of the electrical current profile of composites reveals rearrangement of CNTs under HGMF.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of dielectric and electrical properties of Mn doped sodium potassium niobate ceramic system using impedance spectroscopy

A single perovskite phase formation of polycrystalline samples of (Na{sub 0.52}K{sub 0.44}Li{sub 0.04}) (Nb{sub 0.86-x}Ta{sub 0.1}Sb{sub 0.04}Mn{sub x}) (where x = 0.00, 0.01, 0.03, and 0.05) here by denoted as NKNLST and Mn doped NKNLST were prepared by mixed oxide method. The preliminary structural studies were carried out by x-ray diffraction technique showing the formation of single perovskite phase with orthorhombic symmetry for all compositions. Addition of Mn in NKNLST system lowered the sintering temperature by 75 deg. C. Detail study of impedance parameters shows the non-Debye temperature of relaxation phenomena in the system. This analysis enables us to separate grain and grain boundary contribution of the materials. Above the ferroelectric-paraelectric phase transition temperature, the electrical conduction is governed by the thermal excitation of carriers from oxygen vacancies exhibiting Negative temperature coefficient (NTCR) behaviour.

36 MATERIALS SCIENCE↗

Fabrication and electrical properties of Si-based La{sub 10−x}Bi{sub x}(SiO{sub 4}){sub 6}O{sub 3} apatite ionic conductor

In this paper we report an investigation about the relationship between Bi content and conductivity for the La{sub 10−x}Bi{sub x}(SiO{sub 4}){sub 6}O{sub 3} (x = 0.5–2) specimens. Increasing Bi content in apatite-type La{sub 10−x}Bi{sub x}(SiO{sub 4}){sub 6}O{sub 3} specimen leads to increasing the average grain size and sinterability because some Bi ion deposited at grain boundaries which promotes grain growth. The relative sintered density of the La{sub 8}Bi{sub 2}(SiO{sub 4}){sub 6}O{sub 3} specimen is 98%. There is a small shift in diffraction angle of XRD peaks, complicated lattice distortion was observed in the X-ray pattern with increasing content of Bi. Electrical conductivity of La{sub 10−x}Bi{sub x}(SiO{sub 4}){sub 6}O{sub 3} specimen increased with increasing Bi contents and the value of the La{sub 8}Bi{sub 2}(SiO{sub 4}){sub 6}O{sub 3} specimen is 2.4 × 10{sup −4} S cm{sup −1} at 700 °C.

36 MATERIALS SCIENCE↗

Electrical Properties of p-NiO/n-Si Heterostructures Based on Nanostructured Silicon

Silicon nanowires are formed on n-Si substrates by chemical etching. p-NiO/n-Si heterostructures are fabricated by reactive magnetron sputtering. The energy diagram of anisotype p-NiO/n-Si heterostructures is constructed according to the Anderson model. The current–voltage and capacitance–voltage characteristics are measured and analyzed. The main current-transport mechanisms through the p-NiO/n-Si heterojunction under forward and reverse biases are established.

36 MATERIALS SCIENCE↗

Synthesis, Hole Doping, and Electrical Properties of a Semiconducting Azatriangulene-Based Covalent Organic Framework

Two-dimensional covalent organic frameworks (2D COFs) containing heterotriangulenes have been theoretically identified as semiconductors with tunable, Dirac-cone-like band structures, which are expected to afford high charge-carrier mobilities ideal for next-generation flexible electronics. However, few bulk syntheses of these materials have been reported, and existing synthetic methods provide limited control of network purity and morphology. Here, we report transimination reactions between benzophenone-imine-protected azatriangulenes (OTPA) and benzodithiophene dialdehydes (BDT), which afforded a new semiconducting COF network, OTPA-BDT. The COFs were prepared as both polycrystalline powders and thin films with controlled crystallite orientation. Here, the azatriangulene nodes are readily oxidized to stable radical cations upon exposure to an appropriate p type dopant, tris(4-bromophenyl)ammoniumyl hexachloroantimonate, after which the network’s crystallinity and orientation are maintained. Oriented, hole-doped OTPA-BDT COF films exhibit electrical conductivities of up to 1.2 × 10 –1 S cm –1 , which are among the highest reported for imine-linked 2D COFs to date.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of the synthesis method on the porosity, microstructure and electrical properties of La{sub 0.7}Sr{sub 0.3}MnO{sub 3} cathode materials

Lanthanum strontium manganite (La{sub 1-x}Sr{sub x}MnO{sub 3}, LSM) has been studied as a promising material for application as a cathode in solid oxide fuel cells. In the present work La{sub 0.7}Sr{sub 0.3}MnO{sub 3} nanopowders were synthesized by three different methods (combustion, citrate and solid-state) and characterized by thermal analysis, X-ray diffraction, physical adsorption of N{sub 2} and scanning electron microscopy. All powders exhibited single LSM phase formation with crystallite sizes in the range of 12-20 nm. Nanopowders were sintered at 1100 deg. C to produce porous pellets. The porosity, particle size and microstructure of LSM sintered bodies are strongly dependent on the preparation methodology. The samples synthesized by combustion and citrate methods presented smaller particle sizes and higher porosity after sintering than that derived from solid-state synthesis. However, the electrical conductivity, measured by two-probe technique, was very similar for all three samples.

36 MATERIALS SCIENCE↗

Surface morphology and electrical properties of Au/Ni/ Left-Pointing-Angle-Bracket C Right-Pointing-Angle-Bracket /n-Ga{sub 2}O{sub 3}/p-GaSe Left-Pointing-Angle-Bracket KNO{sub 3} Right-Pointing-Angle-Bracket hybrid structures fabricated on the basis of a layered semiconductor with nanoscale ferroelectric inclusions

Features of the formation of Au/Ni/ Left-Pointing-Angle-Bracket C Right-Pointing-Angle-Bracket /n-Ga{sub 2}O{sub 3} hybrid nanostructures on a Van der Waals surface (0001) of 'layered semiconductor-ferroelectric' composite nanostructures (p-GaSe Left-Pointing-Angle-Bracket KNO{sub 3} Right-Pointing-Angle-Bracket ) are studied using atomic-force microscopy. The room-temperature current-voltage characteristics and the dependence of the impedance spectrum of hybrid structures on a bias voltage are studied. The current-voltage characteristic includes a resonance peak and a portion with negative differential resistance. The current attains a maximum at a certain bias voltage, when electric polarization switching in nanoscale three-dimensional inclusions in the layered GaSe matrix occurs. In the high-frequency region (f > 10{sup 6} Hz), inductive-type impedance (a large negative capacitance of structures, {approx}10{sup 6} F/mm{sup 2}) is detected. This effect is due to spinpolarized electron transport in a series of interconnected semiconductor composite nanostructures with multiple p-GaSe Left-Pointing-Angle-Bracket KNO{sub 3} Right-Pointing-Angle-Bracket quantum wells and a forward-biased 'ferromagnetic metal-semiconductor' polarizer (Au/Ni/ Left-Pointing-Angle-Bracket C Right-Pointing-Angle-Bracket /n{sup +}-Ga{sub 2}O{sub 3}/n-Ga{sub 2}O{sub 3}). A shift of the maximum (current hysteresis) is detected in the current-voltage characteristics for various directions of the variations in bias voltage.

36 MATERIALS SCIENCE↗

Synthesis, characterization and solid state electrical properties of 1-D coordination polymer of the type [Cu{sub x}Ni{sub 1-x}(dadb){center_dot}yH{sub 2}O]{sub n}

New heterobimetallic complexes [Cu{sub x}Ni{sub 1-x}(dadb){center_dot}yH{sub 2}O]{sub n} {l_brace}where dadb=2,5-Diamino-3,6-dichloro-1,4-benzoquinone (1); x=1 (2), 0.5 (4), 0.25 (5), 0.125 (6), 0.0625 (7) and 0 (3); y=2; n=degree of polymerization{r_brace} were synthesized and characterized. Heterobimetallic complexes show normal magnetic moments, whereas, monometallic complexes exhibit magnetic moments less than the value due to spin only. Thermo-gravimetric analysis shows that degradation of the ligand dadb moiety is being controlled by the electronic environment of the Cu(II) ions in preference over Ni(II) in heterobimetallic complexes. Existence of the mixed valency/non-integral oxidation states of copper and nickel metal ions in the complex 4 has been attributed from magnetic moment and ESR spectral results. Solid state dc electrical conductivity of all the complexes was investigated. Monometallic complexes were found to be semiconductors, whereas heterobimetallic coordination polymer 4 was found to exhibit metallic behaviour. Existence of mixed valency/ non-integral oxidation state of metal ions seems to be responsible for the metallic behaviour. - Graphical abstract: Contrast to the semiconductor monometallic complexes 2 and 3, the heterobimetallic complex 4 exhibits metallic behaviour attributed to the mixed valency/non-integral oxidation state of the metal ions concluded from magnetic and ESR spectral studies. Highlights: Black-Right-Pointing-Pointer 1-D coordination compounds of the type Cu{sub x}Ni{sub 1-x}(dadb){center_dot}yH{sub 2}O were synthesized and characterized. Black-Right-Pointing-Pointer Thermal degradation of the complexes provides an indication of long range electronic communication between metal to ligand. Black-Right-Pointing-Pointer On inclusion of Ni(II) into 1-D coordination polymer of Cu(II). (a) Cu(II) and Ni(II) ions exhibit non-integral oxidation state. (b) resulting heterobimetallic complex 4 exhibits metallic behaviour at all temperature range of the present study whereas monometallic complexes are semiconductor.

36 MATERIALS SCIENCE↗

Impacts of crystal orientation of GaAs on the interfacial structures and electrical properties of Hf{sub 0.6}La{sub 0.4}O{sub x} films

One of the major challenges in realizing the GaAs channel in the metal oxide semiconductor field effect transistor is the degrading in electron transport properties at the interface between GaAs and the gate oxide. In this study, Hf{sub 0.6}La{sub 0.4}O{sub x} gate oxide films were deposited at a low temperature (200 °C) on GaAs(111)A and GaAs(100) substrates by plasma enhanced atomic layer deposition. Microstructure analysis indicates that residuals of gallium oxide, arsenic oxide, and As element remained at the interface of Hf{sub 0.6}La{sub 0.4}O{sub x}/GaAs(100). On contrast, a smoother interface is observed between Hf{sub 0.6}La{sub 0.4}O{sub x} thin film and GaAs(111)A substrate. Furthermore, a reduction of interfacial layer is observed in Hf{sub 0.6}La{sub 0.4}O{sub x}/GaAs(111)A. Electrical characterization of the metal-insulator-semiconductor Pt/Hf{sub 0.6}La{sub 0.4}O{sub x}/n-GaAs(111)A capacitor indicated a reduction of D{sub it} and leakage current compared with the capacitor fabricated on GaAs(100)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Oxygen Treatment on the Structural and Electrical Properties of Tl{sub 0.85}Cd{sub 0.15}Sr{sub 2}CuO{sub 5−δ}, Tl{sub 0.85}Cd{sub 0.15}Sr{sub 2}Ca{sub 2}Cu{sub 2}O{sub 7−δ} and Tl{sub 0.85}Cd{sub 0.15}Sr{sub 3}Ca{sub 2}Cu{sub 3}O{sub 9−δ} Superconductors

The solid-state reaction was used to prepare three different high-temperature superconductors, namely Tl{sub 0.85}Cd{sub 0.15}Sr{sub 2}CuO{sub 5−δ}, Tl{sub 0.85}Cd{sub 0.15}Sr{sub 2}Ca{sub 2}Cu{sub 2}O{sub 7−δ} and Tl{sub 0.85}Cd{sub 0.15}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub 9−δ}. The optimum calcinations were performed at 800{sup ∘}C, and the sintering was performed within 855–860{sup ∘}C. The samples were tested before and after oxygen treatment. It has been found that the oxygen flow on samples during preparation produces high-phase superconductors as compared with the samples prepared without oxygen flow. The four-probe techniques were used to measure the electrical resistivity to know the transition temperature (T{sub c}). It was found that the samples which were prepared with oxygen flow have the highest zero-transition temperatures (T{sub c(offset)}) of 85, 106 and 121 K for the samples Tl{sub 0.85}Cd{sub 0.15}Sr{sub 2}CuO{sub 5−δ}, Tl{sub 0.85}Cd{sub 0.15}Sr{sub 2}Ca{sub 2}Cu{sub 2}O{sub 7−δ} and Tl{sub 0.85}Cd{sub 0.15}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub 9−δ}, respectively. X-ray diffraction spectrum showed all samples are polycrystalline with a tetragonal structure and also showed an increase of the c-axis and lattice constant with the increase of CuO layers and oxygen content. It was noticed that the change of CuO layers of all samples produced a modification in the transition temperature, mass density (ρ{sub m}) and c/a parameter.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and electrical properties of BaBiO 3 and high resistivity BaTiO 3 –BaBiO 3 ceramics

Ceramics of the composition BaBiO3 (BB) were sintered in oxygen to obtain a single phase with monoclinic II2/mm symmetry as suggested by high-resolution X-ray diffraction. X-ray photoelectron spectroscopy confirmed the presence of bismuth in two valence states - 3+ and 5+. Optical spectroscopy showed presence of a direct bandgap at ~ 2.2eV and a possible indirect bandgap at ~ 0.9eV. This combined with determination of the activation energy for conduction of 0.25eV, as obtained from ac impedance spectroscopy, suggested that a polaron-mediated conduction mechanism was prevalent in BB. The BB ceramics were crushed, mixed with BaTiO3 (BT), and sintered to obtain BT–BB solid solutions. All the ceramics had tetragonal symmetry and exhibited a normal ferroelectric-like dielectric response. Using ac impedance and optical spectroscopy, it was shown that resistivity values of BT–BB were orders of magnitude higher than BT or BB alone, indicating a change in the fundamental defect equilibrium conditions. A shift in the site occupancy of Bi to the A-site is proposed to be the mechanism for the increased electrical resistivity.

36 MATERIALS SCIENCE↗

RFe{sub 2}Mg{sub x}Al{sub 8−x} (R=La–Nd and Sm; x≈0.8): Flux synthesis, structure, magnetic and electrical properties

Single crystals of Mg-substituted CeFe{sub 2}Al{sub 8} type intermetallics RFe{sub 2}Mg{sub x}Al{sub 8–x} (R=La–Nd and Sm; x≤1) were grown by reacting iron and rare earth metals in 1:1 Mg/Al mixed flux. The structure features mono-capped and bi-capped trigonal prismatic FeAl{sub 6} units. Electronic structure calculations indicate that magnesium substitution reduces the valence electron count, shifting the Fermi level away from a pseudo-gap. This changes the electronic nature of the cerium analog; the previously reported ternary CeFe{sub 2}Al{sub 8} shows strong hybridization between the cerium states and the conduction electrons, resulting in no magnetic moment on Ce atoms. On the other hand, magnetic susceptibility measurements on CeFe{sub 2}Mg{sub x}Al{sub 8–x} indicates a localized moment on cerium. The newly synthesized Pr, Nd and Sm analogs exhibit antiferromagnetic ordering at 2.8 K, 7.8 K and 12 K respectively. Solid state {sup 27}Al NMR of LaFe{sub 2}Mg{sub x}Al{sub 8–x} exhibits a broad Knight shift at ~1200 ppm, consistent with the metallic behavior shown by electrical resistivity data. - Graphical abstract: Mg substitution into CeFe{sub 2}Al{sub 8} modifies cerium valence due to changing valence electron count. - Highlights: • RFe{sub 2}Mg{sub x}Al{sub 8−x} (R=La–Nd, Sm) grow as large crystals from reactions in Mg/Al flux. • Products are magnesium-substituted variants of CeFe{sub 2}Al{sub 8}, with CaCo{sub 2}Al{sub 8} structure. • Ce magnetic moment in CeFe{sub 2}Mg{sub x}Al{sub 8−x} varies from that in CeFe{sub 2}Al{sub 8} due to VEC change. • Antiferromagnetic ordering observed for Pr, Nd, Sm analogs of RFe{sub 2}Mg{sub x}Al{sub 8−x}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

ELECTRICAL PROPERTIES OF POLYSTYRENE MATRIX DOPED BY GOLD NANOPARTICLES AND 8HQ

We explored the modification of polymeric film conductivity by changing the conducting filler percentage in the frame of the percolation theory. The polymeric film is a polystyrene (PS) matrix, while the fillers are gold nanoparticles capped with 1-dodecanethiol (Au-DT NPs) and small conjugated molecules 8- hydroxyquinoline (8HQ). Experimental results show, that increasing the Au- DT and 8HQ wt%, film conductivity increases by up to three orders of magnitude due to charge transfer in the 3D network composed by Au- DT NPs and 8HQ.

36 MATERIALS SCIENCE↗

The crystal structure and electrical properties of K{sub 2}NiF{sub 4}-type (Ca{sub 2−x}Sm{sub x})MnO{sub 4}

Graphical abstract: The relationship between log ρ of K{sub 2}NiF{sub 4}-type (Ca{sub 2−x}Sm{sub x})MnO{sub 4} and 1000/T. - Highlights: • K{sub 2}NiF{sub 4}-type (Ca{sub 2−x}Sm{sub x})MnO{sub 4} was synthesized using a polymerized complex route. • The semiconductive samples had minimum values of ρ and E{sub a} at x = 0.1. • The log ρ–1/T curve of x = 0.3 consisted of two different lines at 315 K. • The 1/χ − T curve of x = 0.3 had a peak at 325 K. • These results indicated the presence of a charge-ordering transition at x = 0.3. - Abstract: K{sub 2}NiF{sub 4}-type (Ca{sub 2−x}Sm{sub x})MnO{sub 4} (0.02 ≤ x ≤ 0.3) was synthesized using a polymerized complex route. The crystal structure changed from tetragonal to orthorhombic at x = 0.3. A variation in the lattice parameters was explained by the Mn–O(2) distance, the Mn−O(2)−Mn angle, and the (Ca,Sm)–(Ca,Sm) distance. The samples were n-type semiconductors, and the minimum values of electrical resistivity (ρ) and an energy gap (E{sub g}) at x = 0.1 were accounted by electron transfer through an Mn−O(2)−Mn path and overlap between the Mnt{sub 2g} and Op{sub π} orbitals. In the sample (x = 0.3), the log ρ–1000/T curve consisted of two different lines that intersected at ca. 325 K, and a peak was observed at ca. 315 K in the magnetic susceptibility–temperature curve. These results indicated the presence of a charge-ordering (CO) transition at 315–325 K.

36 MATERIALS SCIENCE↗

Dominant role of oxygen vacancies in electrical properties of unannealed LaAlO{sub 3}/SrTiO{sub 3} interfaces

We report that in unannealed LaAlO{sub 3}/SrTiO{sub 3} (LAO/STO) heterostructures the critical thickness for the appearance of the two-dimensional electron gas can be less than 4 unit cell, the interface is conducting even for STO substrates with mixed terminations and the low-temperature resistance upturn in LAO/STO heterostructures with thick LAO layers strongly depends on laser fluence. Our experimental results provide fundamental insights into the different roles played by oxygen vacancies and polarization catastrophe in the two-dimensional electron gas in crystalline LAO/STO heterostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical properties of the amorphous interfacial layer between Al electrodes and epitaxial NiO films

The amorphous interfacial layer (a-IL) between Al electrode and epitaxial NiO films were studied using electron energy-loss spectroscopy (EELS) and energy-dispersive x-ray spectroscopy. Two distinct properties were found in the a-IL, i.e., a lower metallic and an upper insulating layer. EELS results revealed that the metallic Ni atoms were responsible for the conducting nature of the lower oxide amorphous layer. The resistance behavior of Al/a-IL/epi-NiO was changed from a high to a low resistance state after forming process. The resistance change could be explained by the formation of a nanocrystalline metal alloy in the insulating amorphous layer.

36 MATERIALS SCIENCE↗

Electrical properties of pulsed UV laser irradiated amorphous carbon

Amorphous carbon films containing no hydrogen were irradiated with a pulsed UV laser in vacuum. Raman spectroscopy indicates an increase in the quantity of sp{sup 2} clustering with the highest laser energy density and a commensurate reduction in resistivity. The reduction of resistivity is explained to be associated with thermally induced graphitization of amorphous carbon films. The high field transport is consistent with a Poole-Frenkel type transport mechanism via neutral trapping centers related to sp{sup 2} sites which are activated under high fields. Decreasing the resistivity is an important feature for use of carbon as an electronic material.

36 MATERIALS SCIENCE↗

Effects of thermal annealing process on the electrical properties of p{sup +}-Si/n-SiC heterojunctions

The effects of thermal annealing process on the interface in p{sup +}-Si/n-SiC heterojunctions fabricated by using surface-activated bonding are investigated. It is found by measuring their current-voltage (I-V) characteristics that the reverse-bias current and the ideality factor decreased to 2.98 × 10{sup −6} mA/cm{sup 2} and 1.03, respectively, by annealing the junctions at 1000 °C. Observation by using transmission electron microscopy indicates that an amorphous layer with a thickness of ∼6 nm is formed at the unannealed interface, which vanishes after annealing at 1000 °C. No structural defects at the interface are observed even after annealing at such a high temperature.

36 MATERIALS SCIENCE↗